linux_old1/drivers/net/wireless/wl12xx/wl1271_cmd.c

986 lines
22 KiB
C
Raw Normal View History

/*
* This file is part of wl1271
*
* Copyright (C) 2009-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include "wl1271.h"
#include "wl1271_reg.h"
#include "wl1271_io.h"
#include "wl1271_acx.h"
#include "wl12xx_80211.h"
#include "wl1271_cmd.h"
#include "wl1271_event.h"
#define WL1271_CMD_FAST_POLL_COUNT 50
/*
* send command to firmware
*
* @wl: wl struct
* @id: command id
* @buf: buffer containing the command, must work with dma
* @len: length of the buffer
*/
int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
size_t res_len)
{
struct wl1271_cmd_header *cmd;
unsigned long timeout;
u32 intr;
int ret = 0;
u16 status;
u16 poll_count = 0;
cmd = buf;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->id = cpu_to_le16(id);
cmd->status = 0;
WARN_ON(len % 4 != 0);
wl1271_write(wl, wl->cmd_box_addr, buf, len, false);
wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
ret = -ETIMEDOUT;
goto out;
}
poll_count++;
if (poll_count < WL1271_CMD_FAST_POLL_COUNT)
udelay(10);
else
msleep(1);
intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
}
/* read back the status code of the command */
if (res_len == 0)
res_len = sizeof(struct wl1271_cmd_header);
wl1271_read(wl, wl->cmd_box_addr, cmd, res_len, false);
status = le16_to_cpu(cmd->status);
if (status != CMD_STATUS_SUCCESS) {
wl1271_error("command execute failure %d", status);
ret = -EIO;
}
wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
WL1271_ACX_INTR_CMD_COMPLETE);
out:
return ret;
}
static int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
{
struct wl1271_cmd_cal_channel_tune *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->test.id = TEST_CMD_CHANNEL_TUNE;
cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4;
/* set up any channel, 7 is in the middle of the range */
cmd->channel = 7;
ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_CHANNEL_TUNE failed");
kfree(cmd);
return ret;
}
static int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
{
struct wl1271_cmd_cal_update_ref_point *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT;
/* FIXME: still waiting for the correct values */
cmd->ref_power = 0;
cmd->ref_detector = 0;
cmd->sub_band = WL1271_PD_REFERENCE_POINT_BAND_B_G;
ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed");
kfree(cmd);
return ret;
}
static int wl1271_cmd_cal_p2g(struct wl1271 *wl)
{
struct wl1271_cmd_cal_p2g *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->test.id = TEST_CMD_P2G_CAL;
cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G;
ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_P2G_CAL failed");
kfree(cmd);
return ret;
}
static int wl1271_cmd_cal(struct wl1271 *wl)
{
/*
* FIXME: we must make sure that we're not sleeping when calibration
* is done
*/
int ret;
wl1271_notice("performing tx calibration");
ret = wl1271_cmd_cal_channel_tune(wl);
if (ret < 0)
return ret;
ret = wl1271_cmd_cal_update_ref_point(wl);
if (ret < 0)
return ret;
ret = wl1271_cmd_cal_p2g(wl);
if (ret < 0)
return ret;
return ret;
}
int wl1271_cmd_general_parms(struct wl1271 *wl)
{
struct wl1271_general_parms_cmd *gen_parms;
int ret;
if (!wl->nvs)
return -ENODEV;
gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
if (!gen_parms)
return -ENOMEM;
gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
memcpy(&gen_parms->general_params, &wl->nvs->general_params,
sizeof(struct wl1271_ini_general_params));
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
if (ret < 0)
wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
kfree(gen_parms);
return ret;
}
int wl1271_cmd_radio_parms(struct wl1271 *wl)
{
struct wl1271_radio_parms_cmd *radio_parms;
struct conf_radio_parms *rparam = &wl->conf.init.radioparam;
int ret;
if (!wl->nvs)
return -ENODEV;
radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
if (!radio_parms)
return -ENOMEM;
radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
memcpy(&radio_parms->static_params_2, &wl->nvs->stat_radio_params_2,
sizeof(struct wl1271_ini_band_params_2));
memcpy(&radio_parms->dyn_params_2,
&wl->nvs->dyn_radio_params_2[rparam->fem].params,
sizeof(struct wl1271_ini_fem_params_2));
/* FIXME: current NVS is missing 5GHz parameters */
wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
radio_parms, sizeof(*radio_parms));
ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
if (ret < 0)
wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
kfree(radio_parms);
return ret;
}
/*
* Poll the mailbox event field until any of the bits in the mask is set or a
* timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
*/
static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask)
{
u32 events_vector, event;
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
do {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
msleep(1);
/* read from both event fields */
wl1271_read(wl, wl->mbox_ptr[0], &events_vector,
sizeof(events_vector), false);
event = events_vector & mask;
wl1271_read(wl, wl->mbox_ptr[1], &events_vector,
sizeof(events_vector), false);
event |= events_vector & mask;
} while (!event);
return 0;
}
int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type)
{
static bool do_cal = true;
struct wl1271_cmd_join *join;
int ret, i;
u8 *bssid;
/* FIXME: remove when we get calibration from the factory */
if (do_cal) {
ret = wl1271_cmd_cal(wl);
if (ret < 0)
wl1271_warning("couldn't calibrate");
else
do_cal = false;
}
join = kzalloc(sizeof(*join), GFP_KERNEL);
if (!join) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd join");
/* Reverse order BSSID */
bssid = (u8 *) &join->bssid_lsb;
for (i = 0; i < ETH_ALEN; i++)
bssid[i] = wl->bssid[ETH_ALEN - i - 1];
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
join->rx_config_options = cpu_to_le32(wl->rx_config);
join->rx_filter_options = cpu_to_le32(wl->rx_filter);
join->bss_type = bss_type;
join->basic_rate_set = cpu_to_le32(wl->basic_rate_set);
if (wl->band == IEEE80211_BAND_5GHZ)
join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ;
join->beacon_interval = cpu_to_le16(wl->beacon_int);
join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
join->channel = wl->channel;
join->ssid_len = wl->ssid_len;
memcpy(join->ssid, wl->ssid, wl->ssid_len);
join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH;
/* increment the session counter */
wl->session_counter++;
if (wl->session_counter >= SESSION_COUNTER_MAX)
wl->session_counter = 0;
join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
/* reset TX security counters */
wl->tx_security_last_seq = 0;
wl->tx_security_seq = 0;
ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd join");
goto out_free;
}
ret = wl1271_cmd_wait_for_event(wl, JOIN_EVENT_COMPLETE_ID);
if (ret < 0)
wl1271_error("cmd join event completion error");
out_free:
kfree(join);
out:
return ret;
}
/**
* send test command to firmware
*
* @wl: wl struct
* @buf: buffer containing the command, with all headers, must work with dma
* @len: length of the buffer
* @answer: is answer needed
*/
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
{
int ret;
size_t res_len = 0;
wl1271_debug(DEBUG_CMD, "cmd test");
if (answer)
res_len = buf_len;
ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len);
if (ret < 0) {
wl1271_warning("TEST command failed");
return ret;
}
return ret;
}
/**
* read acx from firmware
*
* @wl: wl struct
* @id: acx id
* @buf: buffer for the response, including all headers, must work with dma
* @len: lenght of buf
*/
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
{
struct acx_header *acx = buf;
int ret;
wl1271_debug(DEBUG_CMD, "cmd interrogate");
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->id = cpu_to_le16(id);
/* payload length, does not include any headers */
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->len = cpu_to_le16(len - sizeof(*acx));
ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len);
if (ret < 0)
wl1271_error("INTERROGATE command failed");
return ret;
}
/**
* write acx value to firmware
*
* @wl: wl struct
* @id: acx id
* @buf: buffer containing acx, including all headers, must work with dma
* @len: length of buf
*/
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
{
struct acx_header *acx = buf;
int ret;
wl1271_debug(DEBUG_CMD, "cmd configure");
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->id = cpu_to_le16(id);
/* payload length, does not include any headers */
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->len = cpu_to_le16(len - sizeof(*acx));
ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0);
if (ret < 0) {
wl1271_warning("CONFIGURE command NOK");
return ret;
}
return 0;
}
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
{
struct cmd_enabledisable_path *cmd;
int ret;
u16 cmd_rx, cmd_tx;
wl1271_debug(DEBUG_CMD, "cmd data path");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
/* the channel here is only used for calibration, so hardcoded to 1 */
cmd->channel = 1;
if (enable) {
cmd_rx = CMD_ENABLE_RX;
cmd_tx = CMD_ENABLE_TX;
} else {
cmd_rx = CMD_DISABLE_RX;
cmd_tx = CMD_DISABLE_TX;
}
ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("rx %s cmd for channel %d failed",
enable ? "start" : "stop", cmd->channel);
goto out;
}
wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
enable ? "start" : "stop", cmd->channel);
ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("tx %s cmd for channel %d failed",
enable ? "start" : "stop", cmd->channel);
goto out;
}
wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
enable ? "start" : "stop", cmd->channel);
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
{
struct wl1271_cmd_ps_params *ps_params = NULL;
int ret = 0;
/* FIXME: this should be in ps.c */
ret = wl1271_acx_wake_up_conditions(wl);
if (ret < 0) {
wl1271_error("couldn't set wake up conditions");
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd set ps mode");
ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
if (!ps_params) {
ret = -ENOMEM;
goto out;
}
ps_params->ps_mode = ps_mode;
ps_params->send_null_data = send;
ps_params->retries = 5;
ps_params->hang_over_period = 1;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
sizeof(*ps_params), 0);
if (ret < 0) {
wl1271_error("cmd set_ps_mode failed");
goto out;
}
out:
kfree(ps_params);
return ret;
}
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len)
{
struct cmd_read_write_memory *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd read memory");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
WARN_ON(len > MAX_READ_SIZE);
len = min_t(size_t, len, MAX_READ_SIZE);
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->addr = cpu_to_le32(addr);
cmd->size = cpu_to_le32(len);
ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd),
sizeof(*cmd));
if (ret < 0) {
wl1271_error("read memory command failed: %d", ret);
goto out;
}
/* the read command got in */
memcpy(answer, cmd->value, len);
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len, u8 active_scan,
u8 high_prio, u8 band, u8 probe_requests)
{
struct wl1271_cmd_trigger_scan_to *trigger = NULL;
struct wl1271_cmd_scan *params = NULL;
struct ieee80211_channel *channels;
u32 rate;
int i, j, n_ch, ret;
u16 scan_options = 0;
u8 ieee_band;
if (band == WL1271_SCAN_BAND_2_4_GHZ) {
ieee_band = IEEE80211_BAND_2GHZ;
rate = wl->conf.tx.basic_rate;
} else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled()) {
ieee_band = IEEE80211_BAND_2GHZ;
rate = wl->conf.tx.basic_rate;
} else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled()) {
ieee_band = IEEE80211_BAND_5GHZ;
rate = wl->conf.tx.basic_rate_5;
} else
return -EINVAL;
if (wl->hw->wiphy->bands[ieee_band]->channels == NULL)
return -EINVAL;
channels = wl->hw->wiphy->bands[ieee_band]->channels;
n_ch = wl->hw->wiphy->bands[ieee_band]->n_channels;
if (test_bit(WL1271_FLAG_SCANNING, &wl->flags))
return -EINVAL;
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;
params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
params->params.rx_filter_options =
cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
if (!active_scan)
scan_options |= WL1271_SCAN_OPT_PASSIVE;
if (high_prio)
scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
params->params.scan_options = cpu_to_le16(scan_options);
params->params.num_probe_requests = probe_requests;
params->params.tx_rate = cpu_to_le32(rate);
params->params.tid_trigger = 0;
params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
if (band == WL1271_SCAN_BAND_DUAL)
params->params.band = WL1271_SCAN_BAND_2_4_GHZ;
else
params->params.band = band;
for (i = 0, j = 0; i < n_ch && i < WL1271_SCAN_MAX_CHANNELS; i++) {
if (!(channels[i].flags & IEEE80211_CHAN_DISABLED)) {
params->channels[j].min_duration =
cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
params->channels[j].max_duration =
cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
memset(&params->channels[j].bssid_lsb, 0xff, 4);
memset(&params->channels[j].bssid_msb, 0xff, 2);
params->channels[j].early_termination = 0;
params->channels[j].tx_power_att =
WL1271_SCAN_CURRENT_TX_PWR;
params->channels[j].channel = channels[i].hw_value;
j++;
}
}
params->params.num_channels = j;
if (ssid_len && ssid) {
params->params.ssid_len = ssid_len;
memcpy(params->params.ssid, ssid, ssid_len);
}
ret = wl1271_cmd_build_probe_req(wl, ssid, ssid_len,
ie, ie_len, ieee_band);
if (ret < 0) {
wl1271_error("PROBE request template failed");
goto out;
}
trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
if (!trigger) {
ret = -ENOMEM;
goto out;
}
/* disable the timeout */
trigger->timeout = 0;
ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
sizeof(*trigger), 0);
if (ret < 0) {
wl1271_error("trigger scan to failed for hw scan");
goto out;
}
wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
set_bit(WL1271_FLAG_SCANNING, &wl->flags);
if (wl1271_11a_enabled()) {
wl->scan.state = band;
if (band == WL1271_SCAN_BAND_DUAL) {
wl->scan.active = active_scan;
wl->scan.high_prio = high_prio;
wl->scan.probe_requests = probe_requests;
if (ssid_len && ssid) {
wl->scan.ssid_len = ssid_len;
memcpy(wl->scan.ssid, ssid, ssid_len);
} else
wl->scan.ssid_len = 0;
}
}
ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0);
if (ret < 0) {
wl1271_error("SCAN failed");
clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
goto out;
}
out:
kfree(params);
kfree(trigger);
return ret;
}
int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
void *buf, size_t buf_len, int index, u32 rates)
{
struct wl1271_cmd_template_set *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id);
WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE);
buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->len = cpu_to_le16(buf_len);
cmd->template_type = template_id;
cmd->enabled_rates = cpu_to_le32(rates);
cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit;
cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit;
cmd->index = index;
if (buf)
memcpy(cmd->template_data, buf, buf_len);
ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("cmd set_template failed: %d", ret);
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl1271_cmd_build_null_data(struct wl1271 *wl)
{
struct sk_buff *skb = NULL;
int size;
void *ptr;
int ret = -ENOMEM;
if (wl->bss_type == BSS_TYPE_IBSS) {
size = sizeof(struct wl12xx_null_data_template);
ptr = NULL;
} else {
skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
if (!skb)
goto out;
size = skb->len;
ptr = skb->data;
}
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, ptr, size, 0,
WL1271_RATE_AUTOMATIC);
out:
dev_kfree_skb(skb);
if (ret)
wl1271_warning("cmd buld null data failed %d", ret);
return ret;
}
int wl1271_cmd_build_klv_null_data(struct wl1271 *wl)
{
struct sk_buff *skb = NULL;
int ret = -ENOMEM;
skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
if (!skb)
goto out;
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV,
skb->data, skb->len,
CMD_TEMPL_KLV_IDX_NULL_DATA,
WL1271_RATE_AUTOMATIC);
out:
dev_kfree_skb(skb);
if (ret)
wl1271_warning("cmd build klv null data failed %d", ret);
return ret;
}
int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid)
{
struct sk_buff *skb;
int ret = 0;
skb = ieee80211_pspoll_get(wl->hw, wl->vif);
if (!skb)
goto out;
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, skb->data,
skb->len, 0, wl->basic_rate);
out:
dev_kfree_skb(skb);
return ret;
}
int wl1271_cmd_build_probe_req(struct wl1271 *wl,
const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len, u8 band)
{
struct sk_buff *skb;
int ret;
skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
ie, ie_len);
if (!skb) {
ret = -ENOMEM;
goto out;
}
wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len);
if (band == IEEE80211_BAND_2GHZ)
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
skb->data, skb->len, 0,
wl->conf.tx.basic_rate);
else
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
skb->data, skb->len, 0,
wl->conf.tx.basic_rate_5);
out:
dev_kfree_skb(skb);
return ret;
}
int wl1271_build_qos_null_data(struct wl1271 *wl)
{
struct ieee80211_qos_hdr template;
memset(&template, 0, sizeof(template));
memcpy(template.addr1, wl->bssid, ETH_ALEN);
memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
memcpy(template.addr3, wl->bssid, ETH_ALEN);
template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
IEEE80211_STYPE_QOS_NULLFUNC |
IEEE80211_FCTL_TODS);
/* FIXME: not sure what priority to use here */
template.qos_ctrl = cpu_to_le16(0);
return wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, &template,
sizeof(template), 0,
WL1271_RATE_AUTOMATIC);
}
int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->id = id;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->key_action = cpu_to_le16(KEY_SET_ID);
cmd->key_type = KEY_WEP;
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("cmd set_default_wep_key failed: %d", ret);
goto out;
}
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
u8 key_size, const u8 *key, const u8 *addr,
u32 tx_seq_32, u16 tx_seq_16)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
if (key_type != KEY_WEP)
memcpy(cmd->addr, addr, ETH_ALEN);
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->key_action = cpu_to_le16(action);
cmd->key_size = key_size;
cmd->key_type = key_type;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16);
cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32);
/* we have only one SSID profile */
cmd->ssid_profile = 0;
cmd->id = id;
if (key_type == KEY_TKIP) {
/*
* We get the key in the following form:
* TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
* but the target is expecting:
* TKIP - RX MIC - TX MIC
*/
memcpy(cmd->key, key, 16);
memcpy(cmd->key + 16, key + 24, 8);
memcpy(cmd->key + 24, key + 16, 8);
} else {
memcpy(cmd->key, key, key_size);
}
wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("could not set keys");
goto out;
}
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_disconnect(struct wl1271 *wl)
{
struct wl1271_cmd_disconnect *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd disconnect");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->rx_config_options = cpu_to_le32(wl->rx_config);
cmd->rx_filter_options = cpu_to_le32(wl->rx_filter);
/* disconnect reason is not used in immediate disconnections */
cmd->type = DISCONNECT_IMMEDIATE;
ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send disconnect command");
goto out_free;
}
ret = wl1271_cmd_wait_for_event(wl, DISCONNECT_EVENT_COMPLETE_ID);
if (ret < 0)
wl1271_error("cmd disconnect event completion error");
out_free:
kfree(cmd);
out:
return ret;
}