p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/gpu/drm/i915/i915_params.c

159 lines
6.1 KiB
C
Raw Normal View History

drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "i915_drv.h"
struct i915_params i915 __read_mostly = {
.modeset = -1,
.panel_ignore_lid = 1,
.powersave = 1,
.semaphores = -1,
.lvds_downclock = 0,
.lvds_channel_mode = 0,
.panel_use_ssc = -1,
.vbt_sdvo_panel_type = -1,
.enable_rc6 = -1,
.enable_fbc = -1,
.enable_hangcheck = true,
.enable_ppgtt = -1,
.enable_psr = 0,
.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
.disable_power_well = 1,
.enable_ips = 1,
.fastboot = 0,
.prefault_disable = 0,
.reset = true,
.invert_brightness = 0,
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
.disable_display = 0,
drm/i915: Enable command parsing by default v2: rebased OTC-Tracker: AXIA-4631 Change-Id: I6747457e1fe7494bd42787af51198fcba398ad78 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Resolve tiny conflict in module option text.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:57 +08:00
.enable_cmd_parser = 1,
drm/i915: Add debug module option for VTd validation VTd has a few too many "outright disable the damn thing" workarounds accumulated and for validation we want a simple knob to make sure we disable them all. Since this is for bdw+ validation and atm we don't have any workarounds for bdw this option currently does nothing. So currently this is just a placeholder to make sure reality will match with the documented process for our validation people. v2: Fix up param description (Jani). v3: Actually git add ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01 15:33:47 +08:00
.disable_vtd_wa = 0,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
};
module_param_named(modeset, i915.modeset, int, 0400);
MODULE_PARM_DESC(modeset,
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
"1=on, -1=force vga console preference [default])");
module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
"-1=force lid closed, -2=force lid open)");
module_param_named(powersave, i915.powersave, int, 0600);
MODULE_PARM_DESC(powersave,
"Enable powersavings, fbc, downclocking, etc. (default: true)");
module_param_named(semaphores, i915.semaphores, int, 0400);
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync "
"(default: -1 (use per-chip defaults))");
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
module_param_named(enable_rc6, i915.enable_rc6, int, 0400);
MODULE_PARM_DESC(enable_rc6,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
"default: -1 (use per-chip default)");
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
module_param_named(enable_fbc, i915.enable_fbc, int, 0600);
MODULE_PARM_DESC(enable_fbc,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400);
MODULE_PARM_DESC(lvds_downclock,
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
module_param_named(reset, i915.reset, bool, 0600);
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
module_param_named(enable_ppgtt, i915.enable_ppgtt, int, 0400);
MODULE_PARM_DESC(enable_ppgtt,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Override PPGTT usage. "
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
module_param_named(enable_psr, i915.enable_psr, int, 0600);
MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
MODULE_PARM_DESC(preliminary_hw_support,
"Enable preliminary hardware support.");
module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
MODULE_PARM_DESC(disable_power_well,
"Disable the power well when possible (default: true)");
module_param_named(enable_ips, i915.enable_ips, int, 0600);
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
module_param_named(fastboot, i915.fastboot, bool, 0600);
MODULE_PARM_DESC(fastboot,
"Try to skip unnecessary mode sets at boot time (default: false)");
module_param_named(prefault_disable, i915.prefault_disable, bool, 0600);
MODULE_PARM_DESC(prefault_disable,
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
"For developers only.");
module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
MODULE_PARM_DESC(invert_brightness,
"Invert backlight brightness "
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
"report PCI device ID, subsystem vendor and subsystem device ID "
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
"It will then be included in an upcoming module version.");
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
module_param_named(disable_display, i915.disable_display, bool, 0600);
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
drm/i915: Implement command buffer parsing logic The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:46 +08:00
drm/i915: Add debug module option for VTd validation VTd has a few too many "outright disable the damn thing" workarounds accumulated and for validation we want a simple knob to make sure we disable them all. Since this is for bdw+ validation and atm we don't have any workarounds for bdw this option currently does nothing. So currently this is just a placeholder to make sure reality will match with the documented process for our validation people. v2: Fix up param description (Jani). v3: Actually git add ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01 15:33:47 +08:00
module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
drm/i915: Implement command buffer parsing logic The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:46 +08:00
module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
MODULE_PARM_DESC(enable_cmd_parser,
drm/i915: Enable command parsing by default v2: rebased OTC-Tracker: AXIA-4631 Change-Id: I6747457e1fe7494bd42787af51198fcba398ad78 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Resolve tiny conflict in module option text.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:57 +08:00
"Enable command parsing (1=enabled [default], 0=disabled)");