linux_old1/arch/m68k/include/asm/system_mm.h

194 lines
4.9 KiB
C
Raw Normal View History

#ifndef _M68K_SYSTEM_H
#define _M68K_SYSTEM_H
#include <linux/linkage.h>
#include <linux/kernel.h>
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
#include <linux/irqflags.h>
#include <asm/segment.h>
#include <asm/entry.h>
#ifdef __KERNEL__
/*
* switch_to(n) should switch tasks to task ptr, first checking that
* ptr isn't the current task, in which case it does nothing. This
* also clears the TS-flag if the task we switched to has used the
* math co-processor latest.
*/
/*
* switch_to() saves the extra registers, that are not saved
* automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
* a0-a1. Some of these are used by schedule() and its predecessors
* and so we might get see unexpected behaviors when a task returns
* with unexpected register values.
*
* syscall stores these registers itself and none of them are used
* by syscall after the function in the syscall has been called.
*
* Beware that resume now expects *next to be in d1 and the offset of
* tss to be in a1. This saves a few instructions as we no longer have
* to push them onto the stack and read them back right after.
*
* 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
*
* Changed 96/09/19 by Andreas Schwab
* pass prev in a0, next in a1
*/
asmlinkage void resume(void);
#define switch_to(prev,next,last) do { \
register void *_prev __asm__ ("a0") = (prev); \
register void *_next __asm__ ("a1") = (next); \
register void *_last __asm__ ("d1"); \
__asm__ __volatile__("jbsr resume" \
: "=a" (_prev), "=a" (_next), "=d" (_last) \
: "0" (_prev), "1" (_next) \
: "d0", "d2", "d3", "d4", "d5"); \
(last) = _last; \
} while (0)
/*
* Force strict CPU ordering.
* Not really required on m68k...
*/
#define nop() do { asm volatile ("nop"); barrier(); } while (0)
#define mb() barrier()
#define rmb() barrier()
#define wmb() barrier()
#define read_barrier_depends() ((void)0)
#define set_mb(var, value) ({ (var) = (value); wmb(); })
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#define smp_read_barrier_depends() ((void)0)
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
struct __xchg_dummy { unsigned long a[100]; };
#define __xg(x) ((volatile struct __xchg_dummy *)(x))
#ifndef CONFIG_RMW_INSNS
static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
{
unsigned long flags, tmp;
local_irq_save(flags);
switch (size) {
case 1:
tmp = *(u8 *)ptr;
*(u8 *)ptr = x;
x = tmp;
break;
case 2:
tmp = *(u16 *)ptr;
*(u16 *)ptr = x;
x = tmp;
break;
case 4:
tmp = *(u32 *)ptr;
*(u32 *)ptr = x;
x = tmp;
break;
default:
BUG();
}
local_irq_restore(flags);
return x;
}
#else
static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
{
switch (size) {
case 1:
__asm__ __volatile__
("moveb %2,%0\n\t"
"1:\n\t"
"casb %0,%1,%2\n\t"
"jne 1b"
: "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
case 2:
__asm__ __volatile__
("movew %2,%0\n\t"
"1:\n\t"
"casw %0,%1,%2\n\t"
"jne 1b"
: "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
case 4:
__asm__ __volatile__
("movel %2,%0\n\t"
"1:\n\t"
"casl %0,%1,%2\n\t"
"jne 1b"
: "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
}
return x;
}
#endif
#include <asm-generic/cmpxchg-local.h>
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
#ifdef CONFIG_RMW_INSNS
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
unsigned long new, int size)
{
switch (size) {
case 1:
__asm__ __volatile__ ("casb %0,%2,%1"
: "=d" (old), "=m" (*(char *)p)
: "d" (new), "0" (old), "m" (*(char *)p));
break;
case 2:
__asm__ __volatile__ ("casw %0,%2,%1"
: "=d" (old), "=m" (*(short *)p)
: "d" (new), "0" (old), "m" (*(short *)p));
break;
case 4:
__asm__ __volatile__ ("casl %0,%2,%1"
: "=d" (old), "=m" (*(int *)p)
: "d" (new), "0" (old), "m" (*(int *)p));
break;
}
return old;
}
#define cmpxchg(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
(unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
(unsigned long)(n), sizeof(*(ptr))))
#else
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
*/
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
(unsigned long)(n), sizeof(*(ptr))))
#include <asm-generic/cmpxchg.h>
#endif
#define arch_align_stack(x) (x)
#endif /* __KERNEL__ */
#endif /* _M68K_SYSTEM_H */