p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/powerpc/include/asm/page_32.h

52 lines
1.3 KiB
C
Raw Normal View History

[PATCH] powerpc: Merge page.h Merge asm-ppc/page.h and asm-ppc64/page.h into asm-powerpc/page.h, asm-powerpc/page_32.h and asm-powerpc/page_64.h Built for PPC (common_defconfig), with ARCH=powerpc, mostly built with ARCH=ppc (other things break the build). Built and booted on P5 LPAR for PPC64 with ARCH=ppc/powerpc (pseries_defconfig). Mostly built for iSeries powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 11:25:24 +08:00
#ifndef _ASM_POWERPC_PAGE_32_H
#define _ASM_POWERPC_PAGE_32_H
[POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero) Added support to allow an 85xx kernel to be run from a non-zero physical address (useful for cooperative asymmetric multiprocessing situations and kdump). The support can be configured at compile time by setting CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as desired. Alternatively, the kernel build can set CONFIG_RELOCATABLE. Setting this config option causes the kernel to determine at runtime the physical addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START. If CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning. However, CONFIG_PHYSICAL_START will always be used to set the LOAD program header physical address field in the resulting ELF image. Currently we are limited to running at a physical address that is a multiple of 256M. This is due to how we map TLBs to cover lowmem. This should be fixed to allow 64M or maybe even 16M alignment in the future. It is considered an error to try and run a kernel at a non-aligned physical address. All the magic for this support is accomplished by proper initialization of the kernel memory subsystem and use of ARCH_PFN_OFFSET. The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings. ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET. /dev/mem continues to allow access to any physical address in the system regardless of how CONFIG_PHYSICAL_START is set. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-22 02:22:34 +08:00
#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
#endif
#endif
[PATCH] powerpc: Merge page.h Merge asm-ppc/page.h and asm-ppc64/page.h into asm-powerpc/page.h, asm-powerpc/page_32.h and asm-powerpc/page_64.h Built for PPC (common_defconfig), with ARCH=powerpc, mostly built with ARCH=ppc (other things break the build). Built and booted on P5 LPAR for PPC64 with ARCH=ppc/powerpc (pseries_defconfig). Mostly built for iSeries powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 11:25:24 +08:00
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
[POWERPC] Fix kmalloc alignment on non-coherent DMA platforms On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important that the kmalloc minimum alignment is set to the cache line size, to avoid sharing cache lines between different objects, so that DMA to one of the objects doesn't corrupt the other. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-19 16:25:06 +08:00
#ifdef CONFIG_NOT_COHERENT_CACHE
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#endif
POWERPC: Allow 32-bit hashed pgtable code to support 36-bit physical This rearranges a bit of code, and adds support for 36-bit physical addressing for configs that use a hashed page table. The 36b physical support is not enabled by default on any config - it must be explicitly enabled via the config system. This patch *only* expands the page table code to accomodate large physical addresses on 32-bit systems and enables the PHYS_64BIT config option for 86xx. It does *not* allow you to boot a board with more than about 3.5GB of RAM - for that, SWIOTLB support is also required (and coming soon). Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-25 00:01:24 +08:00
#ifdef CONFIG_PTE_64BIT
#define PTE_FLAGS_OFFSET 4 /* offset of PTE flags, in bytes */
#else
#define PTE_FLAGS_OFFSET 0
#endif
powerpc/44x: Support for 256KB PAGE_SIZE This patch adds support for 256KB pages on ppc44x-based boards. For simplification of implementation with 256KB pages we still assume 2-level paging. As a side effect this leads to wasting extra memory space reserved for PTE tables: only 1/4 of pages allocated for PTEs are actually used. But this may be an acceptable trade-off to achieve the high performance we have with big PAGE_SIZEs in some applications (e.g. RAID). Also with 256KB PAGE_SIZE we increase THREAD_SIZE up to 32KB to minimize the risk of stack overflows in the cases of on-stack arrays, which size depends on the page size (e.g. multipage BIOs, NTFS, etc.). With 256KB PAGE_SIZE we need to decrease the PKMAP_ORDER at least down to 9, otherwise all high memory (2 ^ 10 * PAGE_SIZE == 256MB) we'll be occupied by PKMAP addresses leaving no place for vmalloc. We do not separate PKMAP_ORDER for 256K from 16K/64K PAGE_SIZE here; actually that value of 10 in support for 16K/64K had been selected rather intuitively. Thus now for all cases of PAGE_SIZE on ppc44x (including the default, 4KB, one) we have 512 pages for PKMAP. Because ELF standard supports only page sizes up to 64K, then you should use binutils later than 2.17.50.0.3 with '-zmax-page-size' set to 256K for building applications, which are to be run with the 256KB-page sized kernel. If using the older binutils, then you should patch them like follows: --- binutils/bfd/elf32-ppc.c.orig +++ binutils/bfd/elf32-ppc.c -#define ELF_MAXPAGESIZE 0x10000 +#define ELF_MAXPAGESIZE 0x40000 One more restriction we currently have with 256KB page sizes is inability to use shmem safely, so, for now, the 256KB is available only if you turn the CONFIG_SHMEM option off (another variant is to use BROKEN). Though, if you need shmem with 256KB pages, you can always remove the !SHMEM dependency in 'config PPC_256K_PAGES', and use the workaround available here: http://lkml.org/lkml/2008/12/19/20 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-29 09:40:44 +08:00
#ifdef CONFIG_PPC_256K_PAGES
#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2 - 2) /* 1/4 of a page */
#else
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 09:55:41 +08:00
#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2) /* full page */
powerpc/44x: Support for 256KB PAGE_SIZE This patch adds support for 256KB pages on ppc44x-based boards. For simplification of implementation with 256KB pages we still assume 2-level paging. As a side effect this leads to wasting extra memory space reserved for PTE tables: only 1/4 of pages allocated for PTEs are actually used. But this may be an acceptable trade-off to achieve the high performance we have with big PAGE_SIZEs in some applications (e.g. RAID). Also with 256KB PAGE_SIZE we increase THREAD_SIZE up to 32KB to minimize the risk of stack overflows in the cases of on-stack arrays, which size depends on the page size (e.g. multipage BIOs, NTFS, etc.). With 256KB PAGE_SIZE we need to decrease the PKMAP_ORDER at least down to 9, otherwise all high memory (2 ^ 10 * PAGE_SIZE == 256MB) we'll be occupied by PKMAP addresses leaving no place for vmalloc. We do not separate PKMAP_ORDER for 256K from 16K/64K PAGE_SIZE here; actually that value of 10 in support for 16K/64K had been selected rather intuitively. Thus now for all cases of PAGE_SIZE on ppc44x (including the default, 4KB, one) we have 512 pages for PKMAP. Because ELF standard supports only page sizes up to 64K, then you should use binutils later than 2.17.50.0.3 with '-zmax-page-size' set to 256K for building applications, which are to be run with the 256KB-page sized kernel. If using the older binutils, then you should patch them like follows: --- binutils/bfd/elf32-ppc.c.orig +++ binutils/bfd/elf32-ppc.c -#define ELF_MAXPAGESIZE 0x10000 +#define ELF_MAXPAGESIZE 0x40000 One more restriction we currently have with 256KB page sizes is inability to use shmem safely, so, for now, the 256KB is available only if you turn the CONFIG_SHMEM option off (another variant is to use BROKEN). Though, if you need shmem with 256KB pages, you can always remove the !SHMEM dependency in 'config PPC_256K_PAGES', and use the workaround available here: http://lkml.org/lkml/2008/12/19/20 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-29 09:40:44 +08:00
#endif
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 09:55:41 +08:00
[PATCH] powerpc: Merge page.h Merge asm-ppc/page.h and asm-ppc64/page.h into asm-powerpc/page.h, asm-powerpc/page_32.h and asm-powerpc/page_64.h Built for PPC (common_defconfig), with ARCH=powerpc, mostly built with ARCH=ppc (other things break the build). Built and booted on P5 LPAR for PPC64 with ARCH=ppc/powerpc (pseries_defconfig). Mostly built for iSeries powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 11:25:24 +08:00
#ifndef __ASSEMBLY__
/*
* The basic type of a PTE - 64 bits for those CPUs with > 32 bit
POWERPC: Allow 32-bit hashed pgtable code to support 36-bit physical This rearranges a bit of code, and adds support for 36-bit physical addressing for configs that use a hashed page table. The 36b physical support is not enabled by default on any config - it must be explicitly enabled via the config system. This patch *only* expands the page table code to accomodate large physical addresses on 32-bit systems and enables the PHYS_64BIT config option for 86xx. It does *not* allow you to boot a board with more than about 3.5GB of RAM - for that, SWIOTLB support is also required (and coming soon). Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-25 00:01:24 +08:00
* physical addressing.
[PATCH] powerpc: Merge page.h Merge asm-ppc/page.h and asm-ppc64/page.h into asm-powerpc/page.h, asm-powerpc/page_32.h and asm-powerpc/page_64.h Built for PPC (common_defconfig), with ARCH=powerpc, mostly built with ARCH=ppc (other things break the build). Built and booted on P5 LPAR for PPC64 with ARCH=ppc/powerpc (pseries_defconfig). Mostly built for iSeries powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 11:25:24 +08:00
*/
#ifdef CONFIG_PTE_64BIT
typedef unsigned long long pte_basic_t;
#else
typedef unsigned long pte_basic_t;
#endif
struct page;
extern void clear_pages(void *page, int order);
static inline void clear_page(void *page) { clear_pages(page, 0); }
extern void copy_page(void *to, void *from);
asm-generic: rename page.h and uaccess.h The current asm-generic/page.h only contains the get_order function, and asm-generic/uaccess.h only implements unaligned accesses. This renames the file to getorder.h and uaccess-unaligned.h to make room for new page.h and uaccess.h file that will be usable by all simple (e.g. nommu) architectures. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-05-14 06:56:30 +08:00
#include <asm-generic/getorder.h>
[PATCH] powerpc: Merge page.h Merge asm-ppc/page.h and asm-ppc64/page.h into asm-powerpc/page.h, asm-powerpc/page_32.h and asm-powerpc/page_64.h Built for PPC (common_defconfig), with ARCH=powerpc, mostly built with ARCH=ppc (other things break the build). Built and booted on P5 LPAR for PPC64 with ARCH=ppc/powerpc (pseries_defconfig). Mostly built for iSeries powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 11:25:24 +08:00
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-11 09:55:41 +08:00
#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1)
#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1)
[PATCH] powerpc: Merge page.h Merge asm-ppc/page.h and asm-ppc64/page.h into asm-powerpc/page.h, asm-powerpc/page_32.h and asm-powerpc/page_64.h Built for PPC (common_defconfig), with ARCH=powerpc, mostly built with ARCH=ppc (other things break the build). Built and booted on P5 LPAR for PPC64 with ARCH=ppc/powerpc (pseries_defconfig). Mostly built for iSeries powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 11:25:24 +08:00
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PAGE_32_H */