linux_old1/arch/arm/kernel/devtree.c

260 lines
6.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/kernel/devtree.c
*
* Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
*/
#include <linux/init.h>
#include <linux/export.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/smp.h>
#include <asm/cputype.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/smp_plat.h>
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#ifdef CONFIG_SMP
extern struct of_cpu_method __cpu_method_of_table[];
static const struct of_cpu_method __cpu_method_of_table_sentinel
__used __section(__cpu_method_of_table_end);
static int __init set_smp_ops_by_method(struct device_node *node)
{
const char *method;
struct of_cpu_method *m = __cpu_method_of_table;
if (of_property_read_string(node, "enable-method", &method))
return 0;
for (; m->method; m++)
if (!strcmp(m->method, method)) {
smp_set_ops(m->ops);
return 1;
}
return 0;
}
#else
static inline int set_smp_ops_by_method(struct device_node *node)
{
return 1;
}
#endif
/*
* arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree
* and builds the cpu logical map array containing MPIDR values related to
* logical cpus
*
* Updates the cpu possible mask with the number of parsed cpu nodes
*/
void __init arm_dt_init_cpu_maps(void)
{
/*
* Temp logical map is initialized with UINT_MAX values that are
* considered invalid logical map entries since the logical map must
* contain a list of MPIDR[23:0] values where MPIDR[31:24] must
* read as 0.
*/
struct device_node *cpu, *cpus;
int found_method = 0;
u32 i, j, cpuidx = 1;
u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
bool bootcpu_valid = false;
cpus = of_find_node_by_path("/cpus");
if (!cpus)
return;
for_each_of_cpu_node(cpu) {
const __be32 *cell;
int prop_bytes;
u32 hwid;
pr_debug(" * %pOF...\n", cpu);
/*
* A device tree containing CPU nodes with missing "reg"
* properties is considered invalid to build the
* cpu_logical_map.
*/
cell = of_get_property(cpu, "reg", &prop_bytes);
if (!cell || prop_bytes < sizeof(*cell)) {
pr_debug(" * %pOF missing reg property\n", cpu);
of_node_put(cpu);
return;
}
/*
* Bits n:24 must be set to 0 in the DT since the reg property
* defines the MPIDR[23:0].
*/
do {
hwid = be32_to_cpu(*cell++);
prop_bytes -= sizeof(*cell);
} while (!hwid && prop_bytes > 0);
if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
of_node_put(cpu);
return;
}
/*
* Duplicate MPIDRs are a recipe for disaster.
* Scan all initialized entries and check for
* duplicates. If any is found just bail out.
* temp values were initialized to UINT_MAX
* to avoid matching valid MPIDR[23:0] values.
*/
for (j = 0; j < cpuidx; j++)
if (WARN(tmp_map[j] == hwid,
"Duplicate /cpu reg properties in the DT\n")) {
of_node_put(cpu);
return;
}
/*
* Build a stashed array of MPIDR values. Numbering scheme
* requires that if detected the boot CPU must be assigned
* logical id 0. Other CPUs get sequential indexes starting
* from 1. If a CPU node with a reg property matching the
* boot CPU MPIDR is detected, this is recorded so that the
* logical map built from DT is validated and can be used
* to override the map created in smp_setup_processor_id().
*/
if (hwid == mpidr) {
i = 0;
bootcpu_valid = true;
} else {
i = cpuidx++;
}
if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than "
"max cores %u, capping them\n",
cpuidx, nr_cpu_ids)) {
cpuidx = nr_cpu_ids;
of_node_put(cpu);
break;
}
tmp_map[i] = hwid;
if (!found_method)
found_method = set_smp_ops_by_method(cpu);
}
/*
* Fallback to an enable-method in the cpus node if nothing found in
* a cpu node.
*/
if (!found_method)
set_smp_ops_by_method(cpus);
if (!bootcpu_valid) {
pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
return;
}
/*
* Since the boot CPU node contains proper data, and all nodes have
* a reg property, the DT CPU list can be considered valid and the
* logical map created in smp_setup_processor_id() can be overridden
*/
for (i = 0; i < cpuidx; i++) {
set_cpu_possible(i, true);
cpu_logical_map(i) = tmp_map[i];
pr_debug("cpu logical map 0x%x\n", cpu_logical_map(i));
}
}
bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
{
return phys_id == cpu_logical_map(cpu);
}
static const void * __init arch_get_next_mach(const char *const **match)
{
static const struct machine_desc *mdesc = __arch_info_begin;
const struct machine_desc *m = mdesc;
if (m >= __arch_info_end)
return NULL;
mdesc++;
*match = m->dt_compat;
return m;
}
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
/**
* setup_machine_fdt - Machine setup when an dtb was passed to the kernel
* @dt_phys: physical address of dt blob
*
* If a dtb was passed to the kernel in r2, then use it to choose the
* correct machine_desc and to setup the system.
*/
const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
{
const struct machine_desc *mdesc, *mdesc_best = NULL;
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
ARM: default machine descriptor for multiplatform Since we now have default implementations for init_time and init_irq, the init_machine callback is the only one that is not yet optional, but since simple DT based platforms all have the same of_platform_populate function call in there, we can consolidate them as well, and then actually boot with a completely empty machine_desc. Unofortunately we cannot just default to an empty init_machine: We cannot call of_platform_populate before init_machine because that does not work in case of auxdata, and we cannot call it after init_machine either because the machine might need to run code after adding the devices. To take the final step, this adds support for booting without defining any machine_desc whatsoever. For the case that CONFIG_MULTIPLATFORM is enabled, it adds a global machine descriptor that never matches any machine but is used as a fallback if nothing else matches. We assume that without CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel is built for, so we still retain the build-time warning for missing machine descriptors and the run-time warning when the platform does not match in that case. In the case that we run on a multiplatform kernel and the machine provides a fully populated device tree, we attempt to keep booting, hoping that no machine specific callbacks are necessary. Finally, this also removes the misguided "select ARCH_VEXPRESS" that was only added to avoid a build error for allnoconfig kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com>
2013-02-01 01:51:18 +08:00
DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
.l2c_aux_val = 0x0,
.l2c_aux_mask = ~0x0,
ARM: default machine descriptor for multiplatform Since we now have default implementations for init_time and init_irq, the init_machine callback is the only one that is not yet optional, but since simple DT based platforms all have the same of_platform_populate function call in there, we can consolidate them as well, and then actually boot with a completely empty machine_desc. Unofortunately we cannot just default to an empty init_machine: We cannot call of_platform_populate before init_machine because that does not work in case of auxdata, and we cannot call it after init_machine either because the machine might need to run code after adding the devices. To take the final step, this adds support for booting without defining any machine_desc whatsoever. For the case that CONFIG_MULTIPLATFORM is enabled, it adds a global machine descriptor that never matches any machine but is used as a fallback if nothing else matches. We assume that without CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel is built for, so we still retain the build-time warning for missing machine descriptors and the run-time warning when the platform does not match in that case. In the case that we run on a multiplatform kernel and the machine provides a fully populated device tree, we attempt to keep booting, hoping that no machine specific callbacks are necessary. Finally, this also removes the misguided "select ARCH_VEXPRESS" that was only added to avoid a build error for allnoconfig kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com>
2013-02-01 01:51:18 +08:00
MACHINE_END
mdesc_best = &__mach_desc_GENERIC_DT;
ARM: default machine descriptor for multiplatform Since we now have default implementations for init_time and init_irq, the init_machine callback is the only one that is not yet optional, but since simple DT based platforms all have the same of_platform_populate function call in there, we can consolidate them as well, and then actually boot with a completely empty machine_desc. Unofortunately we cannot just default to an empty init_machine: We cannot call of_platform_populate before init_machine because that does not work in case of auxdata, and we cannot call it after init_machine either because the machine might need to run code after adding the devices. To take the final step, this adds support for booting without defining any machine_desc whatsoever. For the case that CONFIG_MULTIPLATFORM is enabled, it adds a global machine descriptor that never matches any machine but is used as a fallback if nothing else matches. We assume that without CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel is built for, so we still retain the build-time warning for missing machine descriptors and the run-time warning when the platform does not match in that case. In the case that we run on a multiplatform kernel and the machine provides a fully populated device tree, we attempt to keep booting, hoping that no machine specific callbacks are necessary. Finally, this also removes the misguided "select ARCH_VEXPRESS" that was only added to avoid a build error for allnoconfig kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com>
2013-02-01 01:51:18 +08:00
#endif
if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
return NULL;
mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
if (!mdesc) {
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
const char *prop;
int size;
unsigned long dt_root;
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
early_print("\nError: unrecognized/unsupported "
"device tree compatible list:\n[ ");
dt_root = of_get_flat_dt_root();
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
while (size > 0) {
early_print("'%s' ", prop);
size -= strlen(prop) + 1;
prop += strlen(prop) + 1;
}
early_print("]\n\n");
dump_machine_table(); /* does not return */
}
/* We really don't want to do this, but sometimes firmware provides buggy data */
if (mdesc->dt_fixup)
mdesc->dt_fixup();
early_init_dt_scan_nodes();
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
/* Change machine number to match the mdesc we're using */
__machine_arch_type = mdesc->nr;
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
return mdesc;
arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy <tixy@yxit.co.uk> - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>] Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-29 04:27:21 +08:00
}