sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
/****************************************************************************
|
2013-08-30 06:32:48 +08:00
|
|
|
* Driver for Solarflare network controllers and boards
|
|
|
|
* Copyright 2010-2012 Solarflare Communications Inc.
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include "net_driver.h"
|
|
|
|
#include "efx.h"
|
|
|
|
#include "nic.h"
|
|
|
|
#include "io.h"
|
|
|
|
#include "mcdi.h"
|
|
|
|
#include "filter.h"
|
|
|
|
#include "mcdi_pcol.h"
|
2012-09-18 08:57:07 +08:00
|
|
|
#include "farch_regs.h"
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
#include "vfdi.h"
|
|
|
|
|
|
|
|
/* Number of longs required to track all the VIs in a VF */
|
|
|
|
#define VI_MASK_LENGTH BITS_TO_LONGS(1 << EFX_VI_SCALE_MAX)
|
|
|
|
|
2012-09-19 09:53:34 +08:00
|
|
|
/* Maximum number of RX queues supported */
|
|
|
|
#define VF_MAX_RX_QUEUES 63
|
|
|
|
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
/**
|
|
|
|
* enum efx_vf_tx_filter_mode - TX MAC filtering behaviour
|
|
|
|
* @VF_TX_FILTER_OFF: Disabled
|
|
|
|
* @VF_TX_FILTER_AUTO: Enabled if MAC address assigned to VF and only
|
|
|
|
* 2 TX queues allowed per VF.
|
|
|
|
* @VF_TX_FILTER_ON: Enabled
|
|
|
|
*/
|
|
|
|
enum efx_vf_tx_filter_mode {
|
|
|
|
VF_TX_FILTER_OFF,
|
|
|
|
VF_TX_FILTER_AUTO,
|
|
|
|
VF_TX_FILTER_ON,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct efx_vf - Back-end resource and protocol state for a PCI VF
|
|
|
|
* @efx: The Efx NIC owning this VF
|
|
|
|
* @pci_rid: The PCI requester ID for this VF
|
|
|
|
* @pci_name: The PCI name (formatted address) of this VF
|
|
|
|
* @index: Index of VF within its port and PF.
|
|
|
|
* @req: VFDI incoming request work item. Incoming USR_EV events are received
|
|
|
|
* by the NAPI handler, but must be handled by executing MCDI requests
|
|
|
|
* inside a work item.
|
|
|
|
* @req_addr: VFDI incoming request DMA address (in VF's PCI address space).
|
|
|
|
* @req_type: Expected next incoming (from VF) %VFDI_EV_TYPE member.
|
|
|
|
* @req_seqno: Expected next incoming (from VF) %VFDI_EV_SEQ member.
|
|
|
|
* @msg_seqno: Next %VFDI_EV_SEQ member to reply to VF. Protected by
|
|
|
|
* @status_lock
|
|
|
|
* @busy: VFDI request queued to be processed or being processed. Receiving
|
|
|
|
* a VFDI request when @busy is set is an error condition.
|
|
|
|
* @buf: Incoming VFDI requests are DMA from the VF into this buffer.
|
|
|
|
* @buftbl_base: Buffer table entries for this VF start at this index.
|
|
|
|
* @rx_filtering: Receive filtering has been requested by the VF driver.
|
|
|
|
* @rx_filter_flags: The flags sent in the %VFDI_OP_INSERT_FILTER request.
|
|
|
|
* @rx_filter_qid: VF relative qid for RX filter requested by VF.
|
|
|
|
* @rx_filter_id: Receive MAC filter ID. Only one filter per VF is supported.
|
|
|
|
* @tx_filter_mode: Transmit MAC filtering mode.
|
|
|
|
* @tx_filter_id: Transmit MAC filter ID.
|
|
|
|
* @addr: The MAC address and outer vlan tag of the VF.
|
|
|
|
* @status_addr: VF DMA address of page for &struct vfdi_status updates.
|
|
|
|
* @status_lock: Mutex protecting @msg_seqno, @status_addr, @addr,
|
|
|
|
* @peer_page_addrs and @peer_page_count from simultaneous
|
|
|
|
* updates by the VM and consumption by
|
2014-11-05 20:16:32 +08:00
|
|
|
* efx_siena_sriov_update_vf_addr()
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
* @peer_page_addrs: Pointer to an array of guest pages for local addresses.
|
|
|
|
* @peer_page_count: Number of entries in @peer_page_count.
|
|
|
|
* @evq0_addrs: Array of guest pages backing evq0.
|
|
|
|
* @evq0_count: Number of entries in @evq0_addrs.
|
|
|
|
* @flush_waitq: wait queue used by %VFDI_OP_FINI_ALL_QUEUES handler
|
|
|
|
* to wait for flush completions.
|
|
|
|
* @txq_lock: Mutex for TX queue allocation.
|
|
|
|
* @txq_mask: Mask of initialized transmit queues.
|
|
|
|
* @txq_count: Number of initialized transmit queues.
|
|
|
|
* @rxq_mask: Mask of initialized receive queues.
|
|
|
|
* @rxq_count: Number of initialized receive queues.
|
|
|
|
* @rxq_retry_mask: Mask or receive queues that need to be flushed again
|
|
|
|
* due to flush failure.
|
|
|
|
* @rxq_retry_count: Number of receive queues in @rxq_retry_mask.
|
|
|
|
* @reset_work: Work item to schedule a VF reset.
|
|
|
|
*/
|
|
|
|
struct efx_vf {
|
|
|
|
struct efx_nic *efx;
|
|
|
|
unsigned int pci_rid;
|
|
|
|
char pci_name[13]; /* dddd:bb:dd.f */
|
|
|
|
unsigned int index;
|
|
|
|
struct work_struct req;
|
|
|
|
u64 req_addr;
|
|
|
|
int req_type;
|
|
|
|
unsigned req_seqno;
|
|
|
|
unsigned msg_seqno;
|
|
|
|
bool busy;
|
|
|
|
struct efx_buffer buf;
|
|
|
|
unsigned buftbl_base;
|
|
|
|
bool rx_filtering;
|
|
|
|
enum efx_filter_flags rx_filter_flags;
|
|
|
|
unsigned rx_filter_qid;
|
|
|
|
int rx_filter_id;
|
|
|
|
enum efx_vf_tx_filter_mode tx_filter_mode;
|
|
|
|
int tx_filter_id;
|
|
|
|
struct vfdi_endpoint addr;
|
|
|
|
u64 status_addr;
|
|
|
|
struct mutex status_lock;
|
|
|
|
u64 *peer_page_addrs;
|
|
|
|
unsigned peer_page_count;
|
|
|
|
u64 evq0_addrs[EFX_MAX_VF_EVQ_SIZE * sizeof(efx_qword_t) /
|
|
|
|
EFX_BUF_SIZE];
|
|
|
|
unsigned evq0_count;
|
|
|
|
wait_queue_head_t flush_waitq;
|
|
|
|
struct mutex txq_lock;
|
|
|
|
unsigned long txq_mask[VI_MASK_LENGTH];
|
|
|
|
unsigned txq_count;
|
|
|
|
unsigned long rxq_mask[VI_MASK_LENGTH];
|
|
|
|
unsigned rxq_count;
|
|
|
|
unsigned long rxq_retry_mask[VI_MASK_LENGTH];
|
|
|
|
atomic_t rxq_retry_count;
|
|
|
|
struct work_struct reset_work;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct efx_memcpy_req {
|
|
|
|
unsigned int from_rid;
|
|
|
|
void *from_buf;
|
|
|
|
u64 from_addr;
|
|
|
|
unsigned int to_rid;
|
|
|
|
u64 to_addr;
|
|
|
|
unsigned length;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct efx_local_addr - A MAC address on the vswitch without a VF.
|
|
|
|
*
|
|
|
|
* Siena does not have a switch, so VFs can't transmit data to each
|
|
|
|
* other. Instead the VFs must be made aware of the local addresses
|
|
|
|
* on the vswitch, so that they can arrange for an alternative
|
|
|
|
* software datapath to be used.
|
|
|
|
*
|
|
|
|
* @link: List head for insertion into efx->local_addr_list.
|
|
|
|
* @addr: Ethernet address
|
|
|
|
*/
|
|
|
|
struct efx_local_addr {
|
|
|
|
struct list_head link;
|
|
|
|
u8 addr[ETH_ALEN];
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct efx_endpoint_page - Page of vfdi_endpoint structures
|
|
|
|
*
|
|
|
|
* @link: List head for insertion into efx->local_page_list.
|
|
|
|
* @ptr: Pointer to page.
|
|
|
|
* @addr: DMA address of page.
|
|
|
|
*/
|
|
|
|
struct efx_endpoint_page {
|
|
|
|
struct list_head link;
|
|
|
|
void *ptr;
|
|
|
|
dma_addr_t addr;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Buffer table entries are reserved txq0,rxq0,evq0,txq1,rxq1,evq1 */
|
|
|
|
#define EFX_BUFTBL_TXQ_BASE(_vf, _qid) \
|
|
|
|
((_vf)->buftbl_base + EFX_VF_BUFTBL_PER_VI * (_qid))
|
|
|
|
#define EFX_BUFTBL_RXQ_BASE(_vf, _qid) \
|
|
|
|
(EFX_BUFTBL_TXQ_BASE(_vf, _qid) + \
|
|
|
|
(EFX_MAX_DMAQ_SIZE * sizeof(efx_qword_t) / EFX_BUF_SIZE))
|
|
|
|
#define EFX_BUFTBL_EVQ_BASE(_vf, _qid) \
|
|
|
|
(EFX_BUFTBL_TXQ_BASE(_vf, _qid) + \
|
|
|
|
(2 * EFX_MAX_DMAQ_SIZE * sizeof(efx_qword_t) / EFX_BUF_SIZE))
|
|
|
|
|
|
|
|
#define EFX_FIELD_MASK(_field) \
|
|
|
|
((1 << _field ## _WIDTH) - 1)
|
|
|
|
|
|
|
|
/* VFs can only use this many transmit channels */
|
|
|
|
static unsigned int vf_max_tx_channels = 2;
|
|
|
|
module_param(vf_max_tx_channels, uint, 0444);
|
|
|
|
MODULE_PARM_DESC(vf_max_tx_channels,
|
|
|
|
"Limit the number of TX channels VFs can use");
|
|
|
|
|
|
|
|
static int max_vfs = -1;
|
|
|
|
module_param(max_vfs, int, 0444);
|
|
|
|
MODULE_PARM_DESC(max_vfs,
|
|
|
|
"Reduce the number of VFs initialized by the driver");
|
|
|
|
|
|
|
|
/* Workqueue used by VFDI communication. We can't use the global
|
|
|
|
* workqueue because it may be running the VF driver's probe()
|
|
|
|
* routine, which will be blocked there waiting for a VFDI response.
|
|
|
|
*/
|
|
|
|
static struct workqueue_struct *vfdi_workqueue;
|
|
|
|
|
|
|
|
static unsigned abs_index(struct efx_vf *vf, unsigned index)
|
|
|
|
{
|
|
|
|
return EFX_VI_BASE + vf->index * efx_vf_size(vf->efx) + index;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static int efx_siena_sriov_cmd(struct efx_nic *efx, bool enable,
|
|
|
|
unsigned *vi_scale_out, unsigned *vf_total_out)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2012-09-15 00:30:10 +08:00
|
|
|
MCDI_DECLARE_BUF(inbuf, MC_CMD_SRIOV_IN_LEN);
|
|
|
|
MCDI_DECLARE_BUF(outbuf, MC_CMD_SRIOV_OUT_LEN);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
unsigned vi_scale, vf_total;
|
|
|
|
size_t outlen;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
MCDI_SET_DWORD(inbuf, SRIOV_IN_ENABLE, enable ? 1 : 0);
|
|
|
|
MCDI_SET_DWORD(inbuf, SRIOV_IN_VI_BASE, EFX_VI_BASE);
|
|
|
|
MCDI_SET_DWORD(inbuf, SRIOV_IN_VF_COUNT, efx->vf_count);
|
|
|
|
|
|
|
|
rc = efx_mcdi_rpc(efx, MC_CMD_SRIOV, inbuf, MC_CMD_SRIOV_IN_LEN,
|
|
|
|
outbuf, MC_CMD_SRIOV_OUT_LEN, &outlen);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
if (outlen < MC_CMD_SRIOV_OUT_LEN)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
vf_total = MCDI_DWORD(outbuf, SRIOV_OUT_VF_TOTAL);
|
|
|
|
vi_scale = MCDI_DWORD(outbuf, SRIOV_OUT_VI_SCALE);
|
|
|
|
if (vi_scale > EFX_VI_SCALE_MAX)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (vi_scale_out)
|
|
|
|
*vi_scale_out = vi_scale;
|
|
|
|
if (vf_total_out)
|
|
|
|
*vf_total_out = vf_total;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_usrev(struct efx_nic *efx, bool enabled)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
efx_oword_t reg;
|
|
|
|
|
|
|
|
EFX_POPULATE_OWORD_2(reg,
|
|
|
|
FRF_CZ_USREV_DIS, enabled ? 0 : 1,
|
2014-11-05 20:16:18 +08:00
|
|
|
FRF_CZ_DFLT_EVQ, nic_data->vfdi_channel->channel);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
efx_writeo(efx, ®, FR_CZ_USR_EV_CFG);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static int efx_siena_sriov_memcpy(struct efx_nic *efx,
|
|
|
|
struct efx_memcpy_req *req,
|
|
|
|
unsigned int count)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2012-09-15 00:31:33 +08:00
|
|
|
MCDI_DECLARE_BUF(inbuf, MCDI_CTL_SDU_LEN_MAX_V1);
|
|
|
|
MCDI_DECLARE_STRUCT_PTR(record);
|
|
|
|
unsigned int index, used;
|
2012-10-11 06:20:17 +08:00
|
|
|
u64 from_addr;
|
|
|
|
u32 from_rid;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
int rc;
|
|
|
|
|
|
|
|
mb(); /* Finish writing source/reading dest before DMA starts */
|
|
|
|
|
2012-09-15 00:31:33 +08:00
|
|
|
if (WARN_ON(count > MC_CMD_MEMCPY_IN_RECORD_MAXNUM))
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
return -ENOBUFS;
|
2012-09-15 00:31:33 +08:00
|
|
|
used = MC_CMD_MEMCPY_IN_LEN(count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
2012-09-15 00:31:33 +08:00
|
|
|
for (index = 0; index < count; index++) {
|
|
|
|
record = MCDI_ARRAY_STRUCT_PTR(inbuf, MEMCPY_IN_RECORD, index);
|
|
|
|
MCDI_SET_DWORD(record, MEMCPY_RECORD_TYPEDEF_NUM_RECORDS,
|
|
|
|
count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
MCDI_SET_DWORD(record, MEMCPY_RECORD_TYPEDEF_TO_RID,
|
|
|
|
req->to_rid);
|
2012-10-11 06:20:17 +08:00
|
|
|
MCDI_SET_QWORD(record, MEMCPY_RECORD_TYPEDEF_TO_ADDR,
|
|
|
|
req->to_addr);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (req->from_buf == NULL) {
|
|
|
|
from_rid = req->from_rid;
|
2012-10-11 06:20:17 +08:00
|
|
|
from_addr = req->from_addr;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
} else {
|
2013-08-20 22:47:12 +08:00
|
|
|
if (WARN_ON(used + req->length >
|
|
|
|
MCDI_CTL_SDU_LEN_MAX_V1)) {
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
rc = -ENOBUFS;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
from_rid = MC_CMD_MEMCPY_RECORD_TYPEDEF_RID_INLINE;
|
2012-10-11 06:20:17 +08:00
|
|
|
from_addr = used;
|
2012-09-15 00:31:33 +08:00
|
|
|
memcpy(_MCDI_PTR(inbuf, used), req->from_buf,
|
|
|
|
req->length);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
used += req->length;
|
|
|
|
}
|
|
|
|
|
|
|
|
MCDI_SET_DWORD(record, MEMCPY_RECORD_TYPEDEF_FROM_RID, from_rid);
|
2012-10-11 06:20:17 +08:00
|
|
|
MCDI_SET_QWORD(record, MEMCPY_RECORD_TYPEDEF_FROM_ADDR,
|
|
|
|
from_addr);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
MCDI_SET_DWORD(record, MEMCPY_RECORD_TYPEDEF_LENGTH,
|
|
|
|
req->length);
|
|
|
|
|
|
|
|
++req;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = efx_mcdi_rpc(efx, MC_CMD_MEMCPY, inbuf, used, NULL, 0, NULL);
|
|
|
|
out:
|
|
|
|
mb(); /* Don't write source/read dest before DMA is complete */
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The TX filter is entirely controlled by this driver, and is modified
|
|
|
|
* underneath the feet of the VF
|
|
|
|
*/
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_reset_tx_filter(struct efx_vf *vf)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct efx_filter_spec filter;
|
|
|
|
u16 vlan;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (vf->tx_filter_id != -1) {
|
|
|
|
efx_filter_remove_id_safe(efx, EFX_FILTER_PRI_REQUIRED,
|
|
|
|
vf->tx_filter_id);
|
|
|
|
netif_dbg(efx, hw, efx->net_dev, "Removed vf %s tx filter %d\n",
|
|
|
|
vf->pci_name, vf->tx_filter_id);
|
|
|
|
vf->tx_filter_id = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (is_zero_ether_addr(vf->addr.mac_addr))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Turn on TX filtering automatically if not explicitly
|
|
|
|
* enabled or disabled.
|
|
|
|
*/
|
|
|
|
if (vf->tx_filter_mode == VF_TX_FILTER_AUTO && vf_max_tx_channels <= 2)
|
|
|
|
vf->tx_filter_mode = VF_TX_FILTER_ON;
|
|
|
|
|
|
|
|
vlan = ntohs(vf->addr.tci) & VLAN_VID_MASK;
|
|
|
|
efx_filter_init_tx(&filter, abs_index(vf, 0));
|
|
|
|
rc = efx_filter_set_eth_local(&filter,
|
|
|
|
vlan ? vlan : EFX_FILTER_VID_UNSPEC,
|
|
|
|
vf->addr.mac_addr);
|
|
|
|
BUG_ON(rc);
|
|
|
|
|
|
|
|
rc = efx_filter_insert_filter(efx, &filter, true);
|
|
|
|
if (rc < 0) {
|
|
|
|
netif_warn(efx, hw, efx->net_dev,
|
|
|
|
"Unable to migrate tx filter for vf %s\n",
|
|
|
|
vf->pci_name);
|
|
|
|
} else {
|
|
|
|
netif_dbg(efx, hw, efx->net_dev, "Inserted vf %s tx filter %d\n",
|
|
|
|
vf->pci_name, rc);
|
|
|
|
vf->tx_filter_id = rc;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The RX filter is managed here on behalf of the VF driver */
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_reset_rx_filter(struct efx_vf *vf)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct efx_filter_spec filter;
|
|
|
|
u16 vlan;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (vf->rx_filter_id != -1) {
|
|
|
|
efx_filter_remove_id_safe(efx, EFX_FILTER_PRI_REQUIRED,
|
|
|
|
vf->rx_filter_id);
|
|
|
|
netif_dbg(efx, hw, efx->net_dev, "Removed vf %s rx filter %d\n",
|
|
|
|
vf->pci_name, vf->rx_filter_id);
|
|
|
|
vf->rx_filter_id = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!vf->rx_filtering || is_zero_ether_addr(vf->addr.mac_addr))
|
|
|
|
return;
|
|
|
|
|
|
|
|
vlan = ntohs(vf->addr.tci) & VLAN_VID_MASK;
|
|
|
|
efx_filter_init_rx(&filter, EFX_FILTER_PRI_REQUIRED,
|
|
|
|
vf->rx_filter_flags,
|
|
|
|
abs_index(vf, vf->rx_filter_qid));
|
|
|
|
rc = efx_filter_set_eth_local(&filter,
|
|
|
|
vlan ? vlan : EFX_FILTER_VID_UNSPEC,
|
|
|
|
vf->addr.mac_addr);
|
|
|
|
BUG_ON(rc);
|
|
|
|
|
|
|
|
rc = efx_filter_insert_filter(efx, &filter, true);
|
|
|
|
if (rc < 0) {
|
|
|
|
netif_warn(efx, hw, efx->net_dev,
|
|
|
|
"Unable to insert rx filter for vf %s\n",
|
|
|
|
vf->pci_name);
|
|
|
|
} else {
|
|
|
|
netif_dbg(efx, hw, efx->net_dev, "Inserted vf %s rx filter %d\n",
|
|
|
|
vf->pci_name, rc);
|
|
|
|
vf->rx_filter_id = rc;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void __efx_siena_sriov_update_vf_addr(struct efx_vf *vf)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_reset_tx_filter(vf);
|
|
|
|
efx_siena_sriov_reset_rx_filter(vf);
|
2014-11-05 20:16:18 +08:00
|
|
|
queue_work(vfdi_workqueue, &nic_data->peer_work);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Push the peer list to this VF. The caller must hold status_lock to interlock
|
|
|
|
* with VFDI requests, and they must be serialised against manipulation of
|
|
|
|
* local_page_list, either by acquiring local_lock or by running from
|
2014-11-05 20:16:32 +08:00
|
|
|
* efx_siena_sriov_peer_work()
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
*/
|
2014-11-05 20:16:32 +08:00
|
|
|
static void __efx_siena_sriov_push_vf_status(struct efx_vf *vf)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
|
|
|
struct vfdi_status *status = nic_data->vfdi_status.addr;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct efx_memcpy_req copy[4];
|
|
|
|
struct efx_endpoint_page *epp;
|
|
|
|
unsigned int pos, count;
|
|
|
|
unsigned data_offset;
|
|
|
|
efx_qword_t event;
|
|
|
|
|
|
|
|
WARN_ON(!mutex_is_locked(&vf->status_lock));
|
|
|
|
WARN_ON(!vf->status_addr);
|
|
|
|
|
|
|
|
status->local = vf->addr;
|
|
|
|
status->generation_end = ++status->generation_start;
|
|
|
|
|
|
|
|
memset(copy, '\0', sizeof(copy));
|
|
|
|
/* Write generation_start */
|
|
|
|
copy[0].from_buf = &status->generation_start;
|
|
|
|
copy[0].to_rid = vf->pci_rid;
|
|
|
|
copy[0].to_addr = vf->status_addr + offsetof(struct vfdi_status,
|
|
|
|
generation_start);
|
|
|
|
copy[0].length = sizeof(status->generation_start);
|
|
|
|
/* DMA the rest of the structure (excluding the generations). This
|
|
|
|
* assumes that the non-generation portion of vfdi_status is in
|
|
|
|
* one chunk starting at the version member.
|
|
|
|
*/
|
|
|
|
data_offset = offsetof(struct vfdi_status, version);
|
|
|
|
copy[1].from_rid = efx->pci_dev->devfn;
|
2014-11-05 20:16:18 +08:00
|
|
|
copy[1].from_addr = nic_data->vfdi_status.dma_addr + data_offset;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
copy[1].to_rid = vf->pci_rid;
|
|
|
|
copy[1].to_addr = vf->status_addr + data_offset;
|
|
|
|
copy[1].length = status->length - data_offset;
|
|
|
|
|
|
|
|
/* Copy the peer pages */
|
|
|
|
pos = 2;
|
|
|
|
count = 0;
|
2014-11-05 20:16:18 +08:00
|
|
|
list_for_each_entry(epp, &nic_data->local_page_list, link) {
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (count == vf->peer_page_count) {
|
|
|
|
/* The VF driver will know they need to provide more
|
|
|
|
* pages because peer_addr_count is too large.
|
|
|
|
*/
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
copy[pos].from_buf = NULL;
|
|
|
|
copy[pos].from_rid = efx->pci_dev->devfn;
|
|
|
|
copy[pos].from_addr = epp->addr;
|
|
|
|
copy[pos].to_rid = vf->pci_rid;
|
|
|
|
copy[pos].to_addr = vf->peer_page_addrs[count];
|
|
|
|
copy[pos].length = EFX_PAGE_SIZE;
|
|
|
|
|
|
|
|
if (++pos == ARRAY_SIZE(copy)) {
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_memcpy(efx, copy, ARRAY_SIZE(copy));
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
pos = 0;
|
|
|
|
}
|
|
|
|
++count;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Write generation_end */
|
|
|
|
copy[pos].from_buf = &status->generation_end;
|
|
|
|
copy[pos].to_rid = vf->pci_rid;
|
|
|
|
copy[pos].to_addr = vf->status_addr + offsetof(struct vfdi_status,
|
|
|
|
generation_end);
|
|
|
|
copy[pos].length = sizeof(status->generation_end);
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_memcpy(efx, copy, pos + 1);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
/* Notify the guest */
|
|
|
|
EFX_POPULATE_QWORD_3(event,
|
|
|
|
FSF_AZ_EV_CODE, FSE_CZ_EV_CODE_USER_EV,
|
|
|
|
VFDI_EV_SEQ, (vf->msg_seqno & 0xff),
|
|
|
|
VFDI_EV_TYPE, VFDI_EV_TYPE_STATUS);
|
|
|
|
++vf->msg_seqno;
|
2013-08-22 02:51:04 +08:00
|
|
|
efx_farch_generate_event(efx,
|
|
|
|
EFX_VI_BASE + vf->index * efx_vf_size(efx),
|
|
|
|
&event);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_bufs(struct efx_nic *efx, unsigned offset,
|
|
|
|
u64 *addr, unsigned count)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
efx_qword_t buf;
|
|
|
|
unsigned pos;
|
|
|
|
|
|
|
|
for (pos = 0; pos < count; ++pos) {
|
|
|
|
EFX_POPULATE_QWORD_3(buf,
|
|
|
|
FRF_AZ_BUF_ADR_REGION, 0,
|
|
|
|
FRF_AZ_BUF_ADR_FBUF,
|
|
|
|
addr ? addr[pos] >> 12 : 0,
|
|
|
|
FRF_AZ_BUF_OWNER_ID_FBUF, 0);
|
|
|
|
efx_sram_writeq(efx, efx->membase + FR_BZ_BUF_FULL_TBL,
|
|
|
|
&buf, offset + pos);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool bad_vf_index(struct efx_nic *efx, unsigned index)
|
|
|
|
{
|
|
|
|
return index >= efx_vf_size(efx);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool bad_buf_count(unsigned buf_count, unsigned max_entry_count)
|
|
|
|
{
|
|
|
|
unsigned max_buf_count = max_entry_count *
|
|
|
|
sizeof(efx_qword_t) / EFX_BUF_SIZE;
|
|
|
|
|
|
|
|
return ((buf_count & (buf_count - 1)) || buf_count > max_buf_count);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check that VI specified by per-port index belongs to a VF.
|
|
|
|
* Optionally set VF index and VI index within the VF.
|
|
|
|
*/
|
|
|
|
static bool map_vi_index(struct efx_nic *efx, unsigned abs_index,
|
|
|
|
struct efx_vf **vf_out, unsigned *rel_index_out)
|
|
|
|
{
|
|
|
|
unsigned vf_i;
|
|
|
|
|
|
|
|
if (abs_index < EFX_VI_BASE)
|
|
|
|
return true;
|
2012-03-03 01:20:00 +08:00
|
|
|
vf_i = (abs_index - EFX_VI_BASE) / efx_vf_size(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (vf_i >= efx->vf_init_count)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
if (vf_out)
|
|
|
|
*vf_out = efx->vf + vf_i;
|
|
|
|
if (rel_index_out)
|
|
|
|
*rel_index_out = abs_index % efx_vf_size(efx);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_init_evq(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct vfdi_req *req = vf->buf.addr;
|
|
|
|
unsigned vf_evq = req->u.init_evq.index;
|
|
|
|
unsigned buf_count = req->u.init_evq.buf_count;
|
|
|
|
unsigned abs_evq = abs_index(vf, vf_evq);
|
|
|
|
unsigned buftbl = EFX_BUFTBL_EVQ_BASE(vf, vf_evq);
|
|
|
|
efx_oword_t reg;
|
|
|
|
|
|
|
|
if (bad_vf_index(efx, vf_evq) ||
|
|
|
|
bad_buf_count(buf_count, EFX_MAX_VF_EVQ_SIZE)) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Invalid INIT_EVQ from %s: evq %d bufs %d\n",
|
|
|
|
vf->pci_name, vf_evq, buf_count);
|
|
|
|
return VFDI_RC_EINVAL;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_bufs(efx, buftbl, req->u.init_evq.addr, buf_count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
EFX_POPULATE_OWORD_3(reg,
|
|
|
|
FRF_CZ_TIMER_Q_EN, 1,
|
|
|
|
FRF_CZ_HOST_NOTIFY_MODE, 0,
|
|
|
|
FRF_CZ_TIMER_MODE, FFE_CZ_TIMER_MODE_DIS);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_TIMER_TBL, abs_evq);
|
|
|
|
EFX_POPULATE_OWORD_3(reg,
|
|
|
|
FRF_AZ_EVQ_EN, 1,
|
|
|
|
FRF_AZ_EVQ_SIZE, __ffs(buf_count),
|
|
|
|
FRF_AZ_EVQ_BUF_BASE_ID, buftbl);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_EVQ_PTR_TBL, abs_evq);
|
|
|
|
|
|
|
|
if (vf_evq == 0) {
|
|
|
|
memcpy(vf->evq0_addrs, req->u.init_evq.addr,
|
|
|
|
buf_count * sizeof(u64));
|
|
|
|
vf->evq0_count = buf_count;
|
|
|
|
}
|
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_init_rxq(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct vfdi_req *req = vf->buf.addr;
|
|
|
|
unsigned vf_rxq = req->u.init_rxq.index;
|
|
|
|
unsigned vf_evq = req->u.init_rxq.evq;
|
|
|
|
unsigned buf_count = req->u.init_rxq.buf_count;
|
|
|
|
unsigned buftbl = EFX_BUFTBL_RXQ_BASE(vf, vf_rxq);
|
|
|
|
unsigned label;
|
|
|
|
efx_oword_t reg;
|
|
|
|
|
|
|
|
if (bad_vf_index(efx, vf_evq) || bad_vf_index(efx, vf_rxq) ||
|
2012-09-19 09:53:34 +08:00
|
|
|
vf_rxq >= VF_MAX_RX_QUEUES ||
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
bad_buf_count(buf_count, EFX_MAX_DMAQ_SIZE)) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Invalid INIT_RXQ from %s: rxq %d evq %d "
|
|
|
|
"buf_count %d\n", vf->pci_name, vf_rxq,
|
|
|
|
vf_evq, buf_count);
|
|
|
|
return VFDI_RC_EINVAL;
|
|
|
|
}
|
|
|
|
if (__test_and_set_bit(req->u.init_rxq.index, vf->rxq_mask))
|
|
|
|
++vf->rxq_count;
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_bufs(efx, buftbl, req->u.init_rxq.addr, buf_count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
label = req->u.init_rxq.label & EFX_FIELD_MASK(FRF_AZ_RX_DESCQ_LABEL);
|
|
|
|
EFX_POPULATE_OWORD_6(reg,
|
|
|
|
FRF_AZ_RX_DESCQ_BUF_BASE_ID, buftbl,
|
|
|
|
FRF_AZ_RX_DESCQ_EVQ_ID, abs_index(vf, vf_evq),
|
|
|
|
FRF_AZ_RX_DESCQ_LABEL, label,
|
|
|
|
FRF_AZ_RX_DESCQ_SIZE, __ffs(buf_count),
|
|
|
|
FRF_AZ_RX_DESCQ_JUMBO,
|
|
|
|
!!(req->u.init_rxq.flags &
|
|
|
|
VFDI_RXQ_FLAG_SCATTER_EN),
|
|
|
|
FRF_AZ_RX_DESCQ_EN, 1);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_RX_DESC_PTR_TBL,
|
|
|
|
abs_index(vf, vf_rxq));
|
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_init_txq(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct vfdi_req *req = vf->buf.addr;
|
|
|
|
unsigned vf_txq = req->u.init_txq.index;
|
|
|
|
unsigned vf_evq = req->u.init_txq.evq;
|
|
|
|
unsigned buf_count = req->u.init_txq.buf_count;
|
|
|
|
unsigned buftbl = EFX_BUFTBL_TXQ_BASE(vf, vf_txq);
|
|
|
|
unsigned label, eth_filt_en;
|
|
|
|
efx_oword_t reg;
|
|
|
|
|
|
|
|
if (bad_vf_index(efx, vf_evq) || bad_vf_index(efx, vf_txq) ||
|
|
|
|
vf_txq >= vf_max_tx_channels ||
|
|
|
|
bad_buf_count(buf_count, EFX_MAX_DMAQ_SIZE)) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Invalid INIT_TXQ from %s: txq %d evq %d "
|
|
|
|
"buf_count %d\n", vf->pci_name, vf_txq,
|
|
|
|
vf_evq, buf_count);
|
|
|
|
return VFDI_RC_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_lock(&vf->txq_lock);
|
|
|
|
if (__test_and_set_bit(req->u.init_txq.index, vf->txq_mask))
|
|
|
|
++vf->txq_count;
|
|
|
|
mutex_unlock(&vf->txq_lock);
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_bufs(efx, buftbl, req->u.init_txq.addr, buf_count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
eth_filt_en = vf->tx_filter_mode == VF_TX_FILTER_ON;
|
|
|
|
|
|
|
|
label = req->u.init_txq.label & EFX_FIELD_MASK(FRF_AZ_TX_DESCQ_LABEL);
|
|
|
|
EFX_POPULATE_OWORD_8(reg,
|
|
|
|
FRF_CZ_TX_DPT_Q_MASK_WIDTH, min(efx->vi_scale, 1U),
|
|
|
|
FRF_CZ_TX_DPT_ETH_FILT_EN, eth_filt_en,
|
|
|
|
FRF_AZ_TX_DESCQ_EN, 1,
|
|
|
|
FRF_AZ_TX_DESCQ_BUF_BASE_ID, buftbl,
|
|
|
|
FRF_AZ_TX_DESCQ_EVQ_ID, abs_index(vf, vf_evq),
|
|
|
|
FRF_AZ_TX_DESCQ_LABEL, label,
|
|
|
|
FRF_AZ_TX_DESCQ_SIZE, __ffs(buf_count),
|
|
|
|
FRF_BZ_TX_NON_IP_DROP_DIS, 1);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_TX_DESC_PTR_TBL,
|
|
|
|
abs_index(vf, vf_txq));
|
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns true when efx_vfdi_fini_all_queues should wake */
|
|
|
|
static bool efx_vfdi_flush_wake(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
/* Ensure that all updates are visible to efx_vfdi_fini_all_queues() */
|
|
|
|
smp_mb();
|
|
|
|
|
|
|
|
return (!vf->txq_count && !vf->rxq_count) ||
|
|
|
|
atomic_read(&vf->rxq_retry_count);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void efx_vfdi_flush_clear(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
memset(vf->txq_mask, 0, sizeof(vf->txq_mask));
|
|
|
|
vf->txq_count = 0;
|
|
|
|
memset(vf->rxq_mask, 0, sizeof(vf->rxq_mask));
|
|
|
|
vf->rxq_count = 0;
|
|
|
|
memset(vf->rxq_retry_mask, 0, sizeof(vf->rxq_retry_mask));
|
|
|
|
atomic_set(&vf->rxq_retry_count, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_fini_all_queues(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
efx_oword_t reg;
|
|
|
|
unsigned count = efx_vf_size(efx);
|
|
|
|
unsigned vf_offset = EFX_VI_BASE + vf->index * efx_vf_size(efx);
|
|
|
|
unsigned timeout = HZ;
|
|
|
|
unsigned index, rxqs_count;
|
2012-09-15 00:31:33 +08:00
|
|
|
MCDI_DECLARE_BUF(inbuf, MC_CMD_FLUSH_RX_QUEUES_IN_LENMAX);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
int rc;
|
|
|
|
|
2012-09-19 09:53:34 +08:00
|
|
|
BUILD_BUG_ON(VF_MAX_RX_QUEUES >
|
|
|
|
MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MAXNUM);
|
|
|
|
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
rtnl_lock();
|
2012-09-06 23:52:31 +08:00
|
|
|
siena_prepare_flush(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
rtnl_unlock();
|
|
|
|
|
|
|
|
/* Flush all the initialized queues */
|
|
|
|
rxqs_count = 0;
|
|
|
|
for (index = 0; index < count; ++index) {
|
|
|
|
if (test_bit(index, vf->txq_mask)) {
|
|
|
|
EFX_POPULATE_OWORD_2(reg,
|
|
|
|
FRF_AZ_TX_FLUSH_DESCQ_CMD, 1,
|
|
|
|
FRF_AZ_TX_FLUSH_DESCQ,
|
|
|
|
vf_offset + index);
|
|
|
|
efx_writeo(efx, ®, FR_AZ_TX_FLUSH_DESCQ);
|
|
|
|
}
|
2012-09-15 00:31:33 +08:00
|
|
|
if (test_bit(index, vf->rxq_mask)) {
|
|
|
|
MCDI_SET_ARRAY_DWORD(
|
|
|
|
inbuf, FLUSH_RX_QUEUES_IN_QID_OFST,
|
|
|
|
rxqs_count, vf_offset + index);
|
|
|
|
rxqs_count++;
|
|
|
|
}
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
atomic_set(&vf->rxq_retry_count, 0);
|
|
|
|
while (timeout && (vf->rxq_count || vf->txq_count)) {
|
2012-09-15 00:31:33 +08:00
|
|
|
rc = efx_mcdi_rpc(efx, MC_CMD_FLUSH_RX_QUEUES, inbuf,
|
|
|
|
MC_CMD_FLUSH_RX_QUEUES_IN_LEN(rxqs_count),
|
|
|
|
NULL, 0, NULL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
WARN_ON(rc < 0);
|
|
|
|
|
|
|
|
timeout = wait_event_timeout(vf->flush_waitq,
|
|
|
|
efx_vfdi_flush_wake(vf),
|
|
|
|
timeout);
|
|
|
|
rxqs_count = 0;
|
|
|
|
for (index = 0; index < count; ++index) {
|
|
|
|
if (test_and_clear_bit(index, vf->rxq_retry_mask)) {
|
|
|
|
atomic_dec(&vf->rxq_retry_count);
|
2012-09-15 00:31:33 +08:00
|
|
|
MCDI_SET_ARRAY_DWORD(
|
|
|
|
inbuf, FLUSH_RX_QUEUES_IN_QID_OFST,
|
|
|
|
rxqs_count, vf_offset + index);
|
|
|
|
rxqs_count++;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
rtnl_lock();
|
2012-09-06 23:52:31 +08:00
|
|
|
siena_finish_flush(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
rtnl_unlock();
|
|
|
|
|
|
|
|
/* Irrespective of success/failure, fini the queues */
|
|
|
|
EFX_ZERO_OWORD(reg);
|
|
|
|
for (index = 0; index < count; ++index) {
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_RX_DESC_PTR_TBL,
|
|
|
|
vf_offset + index);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_TX_DESC_PTR_TBL,
|
|
|
|
vf_offset + index);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_EVQ_PTR_TBL,
|
|
|
|
vf_offset + index);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_TIMER_TBL,
|
|
|
|
vf_offset + index);
|
|
|
|
}
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_bufs(efx, vf->buftbl_base, NULL,
|
|
|
|
EFX_VF_BUFTBL_PER_VI * efx_vf_size(efx));
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
efx_vfdi_flush_clear(vf);
|
|
|
|
|
|
|
|
vf->evq0_count = 0;
|
|
|
|
|
|
|
|
return timeout ? 0 : VFDI_RC_ETIMEDOUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_insert_filter(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct vfdi_req *req = vf->buf.addr;
|
|
|
|
unsigned vf_rxq = req->u.mac_filter.rxq;
|
|
|
|
unsigned flags;
|
|
|
|
|
|
|
|
if (bad_vf_index(efx, vf_rxq) || vf->rx_filtering) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Invalid INSERT_FILTER from %s: rxq %d "
|
|
|
|
"flags 0x%x\n", vf->pci_name, vf_rxq,
|
|
|
|
req->u.mac_filter.flags);
|
|
|
|
return VFDI_RC_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
flags = 0;
|
|
|
|
if (req->u.mac_filter.flags & VFDI_MAC_FILTER_FLAG_RSS)
|
|
|
|
flags |= EFX_FILTER_FLAG_RX_RSS;
|
|
|
|
if (req->u.mac_filter.flags & VFDI_MAC_FILTER_FLAG_SCATTER)
|
|
|
|
flags |= EFX_FILTER_FLAG_RX_SCATTER;
|
|
|
|
vf->rx_filter_flags = flags;
|
|
|
|
vf->rx_filter_qid = vf_rxq;
|
|
|
|
vf->rx_filtering = true;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_reset_rx_filter(vf);
|
2014-11-05 20:16:18 +08:00
|
|
|
queue_work(vfdi_workqueue, &nic_data->peer_work);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_remove_all_filters(struct efx_vf *vf)
|
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
|
|
|
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
vf->rx_filtering = false;
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_reset_rx_filter(vf);
|
2014-11-05 20:16:18 +08:00
|
|
|
queue_work(vfdi_workqueue, &nic_data->peer_work);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_set_status_page(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct vfdi_req *req = vf->buf.addr;
|
2012-02-21 10:57:33 +08:00
|
|
|
u64 page_count = req->u.set_status_page.peer_page_count;
|
|
|
|
u64 max_page_count =
|
|
|
|
(EFX_PAGE_SIZE -
|
|
|
|
offsetof(struct vfdi_req, u.set_status_page.peer_page_addr[0]))
|
|
|
|
/ sizeof(req->u.set_status_page.peer_page_addr[0]);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
2012-02-21 10:57:33 +08:00
|
|
|
if (!req->u.set_status_page.dma_addr || page_count > max_page_count) {
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Invalid SET_STATUS_PAGE from %s\n",
|
|
|
|
vf->pci_name);
|
|
|
|
return VFDI_RC_EINVAL;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
mutex_lock(&nic_data->local_lock);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
mutex_lock(&vf->status_lock);
|
|
|
|
vf->status_addr = req->u.set_status_page.dma_addr;
|
|
|
|
|
|
|
|
kfree(vf->peer_page_addrs);
|
|
|
|
vf->peer_page_addrs = NULL;
|
|
|
|
vf->peer_page_count = 0;
|
|
|
|
|
|
|
|
if (page_count) {
|
|
|
|
vf->peer_page_addrs = kcalloc(page_count, sizeof(u64),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (vf->peer_page_addrs) {
|
|
|
|
memcpy(vf->peer_page_addrs,
|
|
|
|
req->u.set_status_page.peer_page_addr,
|
|
|
|
page_count * sizeof(u64));
|
|
|
|
vf->peer_page_count = page_count;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
__efx_siena_sriov_push_vf_status(vf);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
mutex_unlock(&vf->status_lock);
|
2014-11-05 20:16:18 +08:00
|
|
|
mutex_unlock(&nic_data->local_lock);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int efx_vfdi_clear_status_page(struct efx_vf *vf)
|
|
|
|
{
|
|
|
|
mutex_lock(&vf->status_lock);
|
|
|
|
vf->status_addr = 0;
|
|
|
|
mutex_unlock(&vf->status_lock);
|
|
|
|
|
|
|
|
return VFDI_RC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
typedef int (*efx_vfdi_op_t)(struct efx_vf *vf);
|
|
|
|
|
|
|
|
static const efx_vfdi_op_t vfdi_ops[VFDI_OP_LIMIT] = {
|
|
|
|
[VFDI_OP_INIT_EVQ] = efx_vfdi_init_evq,
|
|
|
|
[VFDI_OP_INIT_TXQ] = efx_vfdi_init_txq,
|
|
|
|
[VFDI_OP_INIT_RXQ] = efx_vfdi_init_rxq,
|
|
|
|
[VFDI_OP_FINI_ALL_QUEUES] = efx_vfdi_fini_all_queues,
|
|
|
|
[VFDI_OP_INSERT_FILTER] = efx_vfdi_insert_filter,
|
|
|
|
[VFDI_OP_REMOVE_ALL_FILTERS] = efx_vfdi_remove_all_filters,
|
|
|
|
[VFDI_OP_SET_STATUS_PAGE] = efx_vfdi_set_status_page,
|
|
|
|
[VFDI_OP_CLEAR_STATUS_PAGE] = efx_vfdi_clear_status_page,
|
|
|
|
};
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_vfdi(struct work_struct *work)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf = container_of(work, struct efx_vf, req);
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct vfdi_req *req = vf->buf.addr;
|
|
|
|
struct efx_memcpy_req copy[2];
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Copy this page into the local address space */
|
|
|
|
memset(copy, '\0', sizeof(copy));
|
|
|
|
copy[0].from_rid = vf->pci_rid;
|
|
|
|
copy[0].from_addr = vf->req_addr;
|
|
|
|
copy[0].to_rid = efx->pci_dev->devfn;
|
|
|
|
copy[0].to_addr = vf->buf.dma_addr;
|
|
|
|
copy[0].length = EFX_PAGE_SIZE;
|
2014-11-05 20:16:32 +08:00
|
|
|
rc = efx_siena_sriov_memcpy(efx, copy, 1);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc) {
|
|
|
|
/* If we can't get the request, we can't reply to the caller */
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Unable to fetch VFDI request from %s rc %d\n",
|
|
|
|
vf->pci_name, -rc);
|
|
|
|
vf->busy = false;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (req->op < VFDI_OP_LIMIT && vfdi_ops[req->op] != NULL) {
|
|
|
|
rc = vfdi_ops[req->op](vf);
|
|
|
|
if (rc == 0) {
|
|
|
|
netif_dbg(efx, hw, efx->net_dev,
|
|
|
|
"vfdi request %d from %s ok\n",
|
|
|
|
req->op, vf->pci_name);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
netif_dbg(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Unrecognised request %d from VF %s addr "
|
|
|
|
"%llx\n", req->op, vf->pci_name,
|
|
|
|
(unsigned long long)vf->req_addr);
|
|
|
|
rc = VFDI_RC_EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allow subsequent VF requests */
|
|
|
|
vf->busy = false;
|
|
|
|
smp_wmb();
|
|
|
|
|
|
|
|
/* Respond to the request */
|
|
|
|
req->rc = rc;
|
|
|
|
req->op = VFDI_OP_RESPONSE;
|
|
|
|
|
|
|
|
memset(copy, '\0', sizeof(copy));
|
|
|
|
copy[0].from_buf = &req->rc;
|
|
|
|
copy[0].to_rid = vf->pci_rid;
|
|
|
|
copy[0].to_addr = vf->req_addr + offsetof(struct vfdi_req, rc);
|
|
|
|
copy[0].length = sizeof(req->rc);
|
|
|
|
copy[1].from_buf = &req->op;
|
|
|
|
copy[1].to_rid = vf->pci_rid;
|
|
|
|
copy[1].to_addr = vf->req_addr + offsetof(struct vfdi_req, op);
|
|
|
|
copy[1].length = sizeof(req->op);
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
(void)efx_siena_sriov_memcpy(efx, copy, ARRAY_SIZE(copy));
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* After a reset the event queues inside the guests no longer exist. Fill the
|
|
|
|
* event ring in guest memory with VFDI reset events, then (re-initialise) the
|
|
|
|
* event queue to raise an interrupt. The guest driver will then recover.
|
|
|
|
*/
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_reset_vf(struct efx_vf *vf,
|
|
|
|
struct efx_buffer *buffer)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct efx_memcpy_req copy_req[4];
|
|
|
|
efx_qword_t event;
|
|
|
|
unsigned int pos, count, k, buftbl, abs_evq;
|
|
|
|
efx_oword_t reg;
|
|
|
|
efx_dword_t ptr;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
BUG_ON(buffer->len != EFX_PAGE_SIZE);
|
|
|
|
|
|
|
|
if (!vf->evq0_count)
|
|
|
|
return;
|
|
|
|
BUG_ON(vf->evq0_count & (vf->evq0_count - 1));
|
|
|
|
|
|
|
|
mutex_lock(&vf->status_lock);
|
|
|
|
EFX_POPULATE_QWORD_3(event,
|
|
|
|
FSF_AZ_EV_CODE, FSE_CZ_EV_CODE_USER_EV,
|
|
|
|
VFDI_EV_SEQ, vf->msg_seqno,
|
|
|
|
VFDI_EV_TYPE, VFDI_EV_TYPE_RESET);
|
|
|
|
vf->msg_seqno++;
|
|
|
|
for (pos = 0; pos < EFX_PAGE_SIZE; pos += sizeof(event))
|
|
|
|
memcpy(buffer->addr + pos, &event, sizeof(event));
|
|
|
|
|
|
|
|
for (pos = 0; pos < vf->evq0_count; pos += count) {
|
|
|
|
count = min_t(unsigned, vf->evq0_count - pos,
|
|
|
|
ARRAY_SIZE(copy_req));
|
|
|
|
for (k = 0; k < count; k++) {
|
|
|
|
copy_req[k].from_buf = NULL;
|
|
|
|
copy_req[k].from_rid = efx->pci_dev->devfn;
|
|
|
|
copy_req[k].from_addr = buffer->dma_addr;
|
|
|
|
copy_req[k].to_rid = vf->pci_rid;
|
|
|
|
copy_req[k].to_addr = vf->evq0_addrs[pos + k];
|
|
|
|
copy_req[k].length = EFX_PAGE_SIZE;
|
|
|
|
}
|
2014-11-05 20:16:32 +08:00
|
|
|
rc = efx_siena_sriov_memcpy(efx, copy_req, count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Unable to notify %s of reset"
|
|
|
|
": %d\n", vf->pci_name, -rc);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reinitialise, arm and trigger evq0 */
|
|
|
|
abs_evq = abs_index(vf, 0);
|
|
|
|
buftbl = EFX_BUFTBL_EVQ_BASE(vf, 0);
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_bufs(efx, buftbl, vf->evq0_addrs, vf->evq0_count);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
EFX_POPULATE_OWORD_3(reg,
|
|
|
|
FRF_CZ_TIMER_Q_EN, 1,
|
|
|
|
FRF_CZ_HOST_NOTIFY_MODE, 0,
|
|
|
|
FRF_CZ_TIMER_MODE, FFE_CZ_TIMER_MODE_DIS);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_TIMER_TBL, abs_evq);
|
|
|
|
EFX_POPULATE_OWORD_3(reg,
|
|
|
|
FRF_AZ_EVQ_EN, 1,
|
|
|
|
FRF_AZ_EVQ_SIZE, __ffs(vf->evq0_count),
|
|
|
|
FRF_AZ_EVQ_BUF_BASE_ID, buftbl);
|
|
|
|
efx_writeo_table(efx, ®, FR_BZ_EVQ_PTR_TBL, abs_evq);
|
|
|
|
EFX_POPULATE_DWORD_1(ptr, FRF_AZ_EVQ_RPTR, 0);
|
sfc: Remove confusing MMIO functions
efx_writed_table() uses a step of 16 bytes but efx_readd_table() uses
a step of 4 bytes. Why are they different?
Firstly, register access is asymmetric:
- The EVQ_RPTR table and RX_INDIRECTION_TBL can (or must?) be written
as dwords even though they have a step size of 16 bytes, unlike
most other CSRs.
- In general, a read of any width is valid for registers, so long as
it does not cross register boundaries. There is also no latching
behaviour in the BIU, contrary to rumour.
We write to the EVQ_RPTR table with efx_writed_table() but never read
it back as it's write-only. We write to the RX_INDIRECTION_TBL with
efx_writed_table(), but only read it back for the register dump, where
we use efx_reado_table() as for any other table with step size of 16.
We read MC_TREG_SMEM with efx_readd_table() for the register dump, but
normally read and write it with efx_readd() and efx_writed() using
offsets calculated in bytes.
Since these functions are trivial and have few callers, it's clearer
to open-code them at the call sites. While we're at it, update the
comments on the BIU behaviour again.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-18 08:56:50 +08:00
|
|
|
efx_writed(efx, &ptr, FR_BZ_EVQ_RPTR + FR_BZ_EVQ_RPTR_STEP * abs_evq);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
mutex_unlock(&vf->status_lock);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_reset_vf_work(struct work_struct *work)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf = container_of(work, struct efx_vf, req);
|
|
|
|
struct efx_nic *efx = vf->efx;
|
|
|
|
struct efx_buffer buf;
|
|
|
|
|
2012-09-19 04:59:52 +08:00
|
|
|
if (!efx_nic_alloc_buffer(efx, &buf, EFX_PAGE_SIZE, GFP_NOIO)) {
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_reset_vf(vf, &buf);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
efx_nic_free_buffer(efx, &buf);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_handle_no_channel(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
netif_err(efx, drv, efx->net_dev,
|
|
|
|
"ERROR: IOV requires MSI-X and 1 additional interrupt"
|
|
|
|
"vector. IOV disabled\n");
|
|
|
|
efx->vf_count = 0;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static int efx_siena_sriov_probe_channel(struct efx_channel *channel)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = channel->efx->nic_data;
|
|
|
|
nic_data->vfdi_channel = channel;
|
|
|
|
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_get_channel_name(struct efx_channel *channel,
|
|
|
|
char *buf, size_t len)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
snprintf(buf, len, "%s-iov", channel->efx->name);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static const struct efx_channel_type efx_siena_sriov_channel_type = {
|
|
|
|
.handle_no_channel = efx_siena_sriov_handle_no_channel,
|
|
|
|
.pre_probe = efx_siena_sriov_probe_channel,
|
2012-10-02 08:43:45 +08:00
|
|
|
.post_remove = efx_channel_dummy_op_void,
|
2014-11-05 20:16:32 +08:00
|
|
|
.get_name = efx_siena_sriov_get_channel_name,
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
/* no copy operation; channel must not be reallocated */
|
|
|
|
.keep_eventq = true,
|
|
|
|
};
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_probe(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
unsigned count;
|
|
|
|
|
|
|
|
if (!max_vfs)
|
|
|
|
return;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
if (efx_siena_sriov_cmd(efx, false, &efx->vi_scale, &count))
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
return;
|
|
|
|
if (count > 0 && count > max_vfs)
|
|
|
|
count = max_vfs;
|
|
|
|
|
|
|
|
/* efx_nic_dimension_resources() will reduce vf_count as appopriate */
|
|
|
|
efx->vf_count = count;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
efx->extra_channel_type[EFX_EXTRA_CHANNEL_IOV] = &efx_siena_sriov_channel_type;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Copy the list of individual addresses into the vfdi_status.peers
|
|
|
|
* array and auxillary pages, protected by %local_lock. Drop that lock
|
|
|
|
* and then broadcast the address list to every VF.
|
|
|
|
*/
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_peer_work(struct work_struct *data)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = container_of(data,
|
|
|
|
struct siena_nic_data,
|
|
|
|
peer_work);
|
|
|
|
struct efx_nic *efx = nic_data->efx;
|
|
|
|
struct vfdi_status *vfdi_status = nic_data->vfdi_status.addr;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct efx_vf *vf;
|
|
|
|
struct efx_local_addr *local_addr;
|
|
|
|
struct vfdi_endpoint *peer;
|
|
|
|
struct efx_endpoint_page *epp;
|
|
|
|
struct list_head pages;
|
|
|
|
unsigned int peer_space;
|
|
|
|
unsigned int peer_count;
|
|
|
|
unsigned int pos;
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
mutex_lock(&nic_data->local_lock);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
/* Move the existing peer pages off %local_page_list */
|
|
|
|
INIT_LIST_HEAD(&pages);
|
2014-11-05 20:16:18 +08:00
|
|
|
list_splice_tail_init(&nic_data->local_page_list, &pages);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
/* Populate the VF addresses starting from entry 1 (entry 0 is
|
|
|
|
* the PF address)
|
|
|
|
*/
|
|
|
|
peer = vfdi_status->peers + 1;
|
|
|
|
peer_space = ARRAY_SIZE(vfdi_status->peers) - 1;
|
|
|
|
peer_count = 1;
|
|
|
|
for (pos = 0; pos < efx->vf_count; ++pos) {
|
|
|
|
vf = efx->vf + pos;
|
|
|
|
|
|
|
|
mutex_lock(&vf->status_lock);
|
|
|
|
if (vf->rx_filtering && !is_zero_ether_addr(vf->addr.mac_addr)) {
|
|
|
|
*peer++ = vf->addr;
|
|
|
|
++peer_count;
|
|
|
|
--peer_space;
|
|
|
|
BUG_ON(peer_space == 0);
|
|
|
|
}
|
|
|
|
mutex_unlock(&vf->status_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill the remaining addresses */
|
2014-11-05 20:16:18 +08:00
|
|
|
list_for_each_entry(local_addr, &nic_data->local_addr_list, link) {
|
2014-03-08 02:27:41 +08:00
|
|
|
ether_addr_copy(peer->mac_addr, local_addr->addr);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
peer->tci = 0;
|
|
|
|
++peer;
|
|
|
|
++peer_count;
|
|
|
|
if (--peer_space == 0) {
|
|
|
|
if (list_empty(&pages)) {
|
|
|
|
epp = kmalloc(sizeof(*epp), GFP_KERNEL);
|
|
|
|
if (!epp)
|
|
|
|
break;
|
|
|
|
epp->ptr = dma_alloc_coherent(
|
|
|
|
&efx->pci_dev->dev, EFX_PAGE_SIZE,
|
|
|
|
&epp->addr, GFP_KERNEL);
|
|
|
|
if (!epp->ptr) {
|
|
|
|
kfree(epp);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
epp = list_first_entry(
|
|
|
|
&pages, struct efx_endpoint_page, link);
|
|
|
|
list_del(&epp->link);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
list_add_tail(&epp->link, &nic_data->local_page_list);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
peer = (struct vfdi_endpoint *)epp->ptr;
|
|
|
|
peer_space = EFX_PAGE_SIZE / sizeof(struct vfdi_endpoint);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
vfdi_status->peer_count = peer_count;
|
2014-11-05 20:16:18 +08:00
|
|
|
mutex_unlock(&nic_data->local_lock);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
/* Free any now unused endpoint pages */
|
|
|
|
while (!list_empty(&pages)) {
|
|
|
|
epp = list_first_entry(
|
|
|
|
&pages, struct efx_endpoint_page, link);
|
|
|
|
list_del(&epp->link);
|
|
|
|
dma_free_coherent(&efx->pci_dev->dev, EFX_PAGE_SIZE,
|
|
|
|
epp->ptr, epp->addr);
|
|
|
|
kfree(epp);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Finally, push the pages */
|
|
|
|
for (pos = 0; pos < efx->vf_count; ++pos) {
|
|
|
|
vf = efx->vf + pos;
|
|
|
|
|
|
|
|
mutex_lock(&vf->status_lock);
|
|
|
|
if (vf->status_addr)
|
2014-11-05 20:16:32 +08:00
|
|
|
__efx_siena_sriov_push_vf_status(vf);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
mutex_unlock(&vf->status_lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_free_local(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct efx_local_addr *local_addr;
|
|
|
|
struct efx_endpoint_page *epp;
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
while (!list_empty(&nic_data->local_addr_list)) {
|
|
|
|
local_addr = list_first_entry(&nic_data->local_addr_list,
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct efx_local_addr, link);
|
|
|
|
list_del(&local_addr->link);
|
|
|
|
kfree(local_addr);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
while (!list_empty(&nic_data->local_page_list)) {
|
|
|
|
epp = list_first_entry(&nic_data->local_page_list,
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct efx_endpoint_page, link);
|
|
|
|
list_del(&epp->link);
|
|
|
|
dma_free_coherent(&efx->pci_dev->dev, EFX_PAGE_SIZE,
|
|
|
|
epp->ptr, epp->addr);
|
|
|
|
kfree(epp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static int efx_siena_sriov_vf_alloc(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
unsigned index;
|
|
|
|
struct efx_vf *vf;
|
|
|
|
|
|
|
|
efx->vf = kzalloc(sizeof(struct efx_vf) * efx->vf_count, GFP_KERNEL);
|
|
|
|
if (!efx->vf)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (index = 0; index < efx->vf_count; ++index) {
|
|
|
|
vf = efx->vf + index;
|
|
|
|
|
|
|
|
vf->efx = efx;
|
|
|
|
vf->index = index;
|
|
|
|
vf->rx_filter_id = -1;
|
|
|
|
vf->tx_filter_mode = VF_TX_FILTER_AUTO;
|
|
|
|
vf->tx_filter_id = -1;
|
2014-11-05 20:16:32 +08:00
|
|
|
INIT_WORK(&vf->req, efx_siena_sriov_vfdi);
|
|
|
|
INIT_WORK(&vf->reset_work, efx_siena_sriov_reset_vf_work);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
init_waitqueue_head(&vf->flush_waitq);
|
|
|
|
mutex_init(&vf->status_lock);
|
|
|
|
mutex_init(&vf->txq_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static void efx_siena_sriov_vfs_fini(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf;
|
|
|
|
unsigned int pos;
|
|
|
|
|
|
|
|
for (pos = 0; pos < efx->vf_count; ++pos) {
|
|
|
|
vf = efx->vf + pos;
|
|
|
|
|
|
|
|
efx_nic_free_buffer(efx, &vf->buf);
|
|
|
|
kfree(vf->peer_page_addrs);
|
|
|
|
vf->peer_page_addrs = NULL;
|
|
|
|
vf->peer_page_count = 0;
|
|
|
|
|
|
|
|
vf->evq0_count = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
static int efx_siena_sriov_vfs_init(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct pci_dev *pci_dev = efx->pci_dev;
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
unsigned index, devfn, sriov, buftbl_base;
|
|
|
|
u16 offset, stride;
|
|
|
|
struct efx_vf *vf;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
sriov = pci_find_ext_capability(pci_dev, PCI_EXT_CAP_ID_SRIOV);
|
|
|
|
if (!sriov)
|
|
|
|
return -ENOENT;
|
|
|
|
|
|
|
|
pci_read_config_word(pci_dev, sriov + PCI_SRIOV_VF_OFFSET, &offset);
|
|
|
|
pci_read_config_word(pci_dev, sriov + PCI_SRIOV_VF_STRIDE, &stride);
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
buftbl_base = nic_data->vf_buftbl_base;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
devfn = pci_dev->devfn + offset;
|
|
|
|
for (index = 0; index < efx->vf_count; ++index) {
|
|
|
|
vf = efx->vf + index;
|
|
|
|
|
|
|
|
/* Reserve buffer entries */
|
|
|
|
vf->buftbl_base = buftbl_base;
|
|
|
|
buftbl_base += EFX_VF_BUFTBL_PER_VI * efx_vf_size(efx);
|
|
|
|
|
|
|
|
vf->pci_rid = devfn;
|
|
|
|
snprintf(vf->pci_name, sizeof(vf->pci_name),
|
|
|
|
"%04x:%02x:%02x.%d",
|
|
|
|
pci_domain_nr(pci_dev->bus), pci_dev->bus->number,
|
|
|
|
PCI_SLOT(devfn), PCI_FUNC(devfn));
|
|
|
|
|
2012-09-19 04:59:52 +08:00
|
|
|
rc = efx_nic_alloc_buffer(efx, &vf->buf, EFX_PAGE_SIZE,
|
|
|
|
GFP_KERNEL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
devfn += stride;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_vfs_fini(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
int efx_siena_sriov_init(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct net_device *net_dev = efx->net_dev;
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
struct vfdi_status *vfdi_status;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Ensure there's room for vf_channel */
|
|
|
|
BUILD_BUG_ON(EFX_MAX_CHANNELS + 1 >= EFX_VI_BASE);
|
|
|
|
/* Ensure that VI_BASE is aligned on VI_SCALE */
|
|
|
|
BUILD_BUG_ON(EFX_VI_BASE & ((1 << EFX_VI_SCALE_MAX) - 1));
|
|
|
|
|
|
|
|
if (efx->vf_count == 0)
|
|
|
|
return 0;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
rc = efx_siena_sriov_cmd(efx, true, NULL, NULL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc)
|
|
|
|
goto fail_cmd;
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
rc = efx_nic_alloc_buffer(efx, &nic_data->vfdi_status,
|
|
|
|
sizeof(*vfdi_status), GFP_KERNEL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc)
|
|
|
|
goto fail_status;
|
2014-11-05 20:16:18 +08:00
|
|
|
vfdi_status = nic_data->vfdi_status.addr;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
memset(vfdi_status, 0, sizeof(*vfdi_status));
|
|
|
|
vfdi_status->version = 1;
|
|
|
|
vfdi_status->length = sizeof(*vfdi_status);
|
|
|
|
vfdi_status->max_tx_channels = vf_max_tx_channels;
|
|
|
|
vfdi_status->vi_scale = efx->vi_scale;
|
|
|
|
vfdi_status->rss_rxq_count = efx->rss_spread;
|
|
|
|
vfdi_status->peer_count = 1 + efx->vf_count;
|
|
|
|
vfdi_status->timer_quantum_ns = efx->timer_quantum_ns;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
rc = efx_siena_sriov_vf_alloc(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc)
|
|
|
|
goto fail_alloc;
|
|
|
|
|
2014-11-05 20:16:18 +08:00
|
|
|
mutex_init(&nic_data->local_lock);
|
2014-11-05 20:16:32 +08:00
|
|
|
INIT_WORK(&nic_data->peer_work, efx_siena_sriov_peer_work);
|
2014-11-05 20:16:18 +08:00
|
|
|
INIT_LIST_HEAD(&nic_data->local_addr_list);
|
|
|
|
INIT_LIST_HEAD(&nic_data->local_page_list);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
rc = efx_siena_sriov_vfs_init(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
if (rc)
|
|
|
|
goto fail_vfs;
|
|
|
|
|
|
|
|
rtnl_lock();
|
2014-03-08 02:27:41 +08:00
|
|
|
ether_addr_copy(vfdi_status->peers[0].mac_addr, net_dev->dev_addr);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
efx->vf_init_count = efx->vf_count;
|
|
|
|
rtnl_unlock();
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_usrev(efx, true);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
/* At this point we must be ready to accept VFDI requests */
|
|
|
|
|
|
|
|
rc = pci_enable_sriov(efx->pci_dev, efx->vf_count);
|
|
|
|
if (rc)
|
|
|
|
goto fail_pci;
|
|
|
|
|
|
|
|
netif_info(efx, probe, net_dev,
|
|
|
|
"enabled SR-IOV for %d VFs, %d VI per VF\n",
|
|
|
|
efx->vf_count, efx_vf_size(efx));
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail_pci:
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_usrev(efx, false);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
rtnl_lock();
|
|
|
|
efx->vf_init_count = 0;
|
|
|
|
rtnl_unlock();
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_vfs_fini(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
fail_vfs:
|
2014-11-05 20:16:18 +08:00
|
|
|
cancel_work_sync(&nic_data->peer_work);
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_free_local(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
kfree(efx->vf);
|
|
|
|
fail_alloc:
|
2014-11-05 20:16:18 +08:00
|
|
|
efx_nic_free_buffer(efx, &nic_data->vfdi_status);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
fail_status:
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_cmd(efx, false, NULL, NULL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
fail_cmd:
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_fini(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf;
|
|
|
|
unsigned int pos;
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
if (efx->vf_init_count == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Disable all interfaces to reconfiguration */
|
2014-11-05 20:16:18 +08:00
|
|
|
BUG_ON(nic_data->vfdi_channel->enabled);
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_usrev(efx, false);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
rtnl_lock();
|
|
|
|
efx->vf_init_count = 0;
|
|
|
|
rtnl_unlock();
|
|
|
|
|
|
|
|
/* Flush all reconfiguration work */
|
|
|
|
for (pos = 0; pos < efx->vf_count; ++pos) {
|
|
|
|
vf = efx->vf + pos;
|
|
|
|
cancel_work_sync(&vf->req);
|
|
|
|
cancel_work_sync(&vf->reset_work);
|
|
|
|
}
|
2014-11-05 20:16:18 +08:00
|
|
|
cancel_work_sync(&nic_data->peer_work);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
pci_disable_sriov(efx->pci_dev);
|
|
|
|
|
|
|
|
/* Tear down back-end state */
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_vfs_fini(efx);
|
|
|
|
efx_siena_sriov_free_local(efx);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
kfree(efx->vf);
|
2014-11-05 20:16:18 +08:00
|
|
|
efx_nic_free_buffer(efx, &nic_data->vfdi_status);
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_cmd(efx, false, NULL, NULL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_event(struct efx_channel *channel, efx_qword_t *event)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = channel->efx;
|
|
|
|
struct efx_vf *vf;
|
|
|
|
unsigned qid, seq, type, data;
|
|
|
|
|
|
|
|
qid = EFX_QWORD_FIELD(*event, FSF_CZ_USER_QID);
|
|
|
|
|
|
|
|
/* USR_EV_REG_VALUE is dword0, so access the VFDI_EV fields directly */
|
|
|
|
BUILD_BUG_ON(FSF_CZ_USER_EV_REG_VALUE_LBN != 0);
|
|
|
|
seq = EFX_QWORD_FIELD(*event, VFDI_EV_SEQ);
|
|
|
|
type = EFX_QWORD_FIELD(*event, VFDI_EV_TYPE);
|
|
|
|
data = EFX_QWORD_FIELD(*event, VFDI_EV_DATA);
|
|
|
|
|
|
|
|
netif_vdbg(efx, hw, efx->net_dev,
|
|
|
|
"USR_EV event from qid %d seq 0x%x type %d data 0x%x\n",
|
|
|
|
qid, seq, type, data);
|
|
|
|
|
|
|
|
if (map_vi_index(efx, qid, &vf, NULL))
|
|
|
|
return;
|
|
|
|
if (vf->busy)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
if (type == VFDI_EV_TYPE_REQ_WORD0) {
|
|
|
|
/* Resynchronise */
|
|
|
|
vf->req_type = VFDI_EV_TYPE_REQ_WORD0;
|
|
|
|
vf->req_seqno = seq + 1;
|
|
|
|
vf->req_addr = 0;
|
|
|
|
} else if (seq != (vf->req_seqno++ & 0xff) || type != vf->req_type)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
switch (vf->req_type) {
|
|
|
|
case VFDI_EV_TYPE_REQ_WORD0:
|
|
|
|
case VFDI_EV_TYPE_REQ_WORD1:
|
|
|
|
case VFDI_EV_TYPE_REQ_WORD2:
|
|
|
|
vf->req_addr |= (u64)data << (vf->req_type << 4);
|
|
|
|
++vf->req_type;
|
|
|
|
return;
|
|
|
|
|
|
|
|
case VFDI_EV_TYPE_REQ_WORD3:
|
|
|
|
vf->req_addr |= (u64)data << 48;
|
|
|
|
vf->req_type = VFDI_EV_TYPE_REQ_WORD0;
|
|
|
|
vf->busy = true;
|
|
|
|
queue_work(vfdi_workqueue, &vf->req);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
error:
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"ERROR: Screaming VFDI request from %s\n",
|
|
|
|
vf->pci_name);
|
|
|
|
/* Reset the request and sequence number */
|
|
|
|
vf->req_type = VFDI_EV_TYPE_REQ_WORD0;
|
|
|
|
vf->req_seqno = seq + 1;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_flr(struct efx_nic *efx, unsigned vf_i)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf;
|
|
|
|
|
|
|
|
if (vf_i > efx->vf_init_count)
|
|
|
|
return;
|
|
|
|
vf = efx->vf + vf_i;
|
|
|
|
netif_info(efx, hw, efx->net_dev,
|
|
|
|
"FLR on VF %s\n", vf->pci_name);
|
|
|
|
|
|
|
|
vf->status_addr = 0;
|
|
|
|
efx_vfdi_remove_all_filters(vf);
|
|
|
|
efx_vfdi_flush_clear(vf);
|
|
|
|
|
|
|
|
vf->evq0_count = 0;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_mac_address_changed(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
2014-11-05 20:16:18 +08:00
|
|
|
struct siena_nic_data *nic_data = efx->nic_data;
|
|
|
|
struct vfdi_status *vfdi_status = nic_data->vfdi_status.addr;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
|
|
|
if (!efx->vf_init_count)
|
|
|
|
return;
|
2014-03-08 02:27:41 +08:00
|
|
|
ether_addr_copy(vfdi_status->peers[0].mac_addr,
|
|
|
|
efx->net_dev->dev_addr);
|
2014-11-05 20:16:18 +08:00
|
|
|
queue_work(vfdi_workqueue, &nic_data->peer_work);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_tx_flush_done(struct efx_nic *efx, efx_qword_t *event)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf;
|
|
|
|
unsigned queue, qid;
|
|
|
|
|
|
|
|
queue = EFX_QWORD_FIELD(*event, FSF_AZ_DRIVER_EV_SUBDATA);
|
|
|
|
if (map_vi_index(efx, queue, &vf, &qid))
|
|
|
|
return;
|
|
|
|
/* Ignore flush completions triggered by an FLR */
|
|
|
|
if (!test_bit(qid, vf->txq_mask))
|
|
|
|
return;
|
|
|
|
|
|
|
|
__clear_bit(qid, vf->txq_mask);
|
|
|
|
--vf->txq_count;
|
|
|
|
|
|
|
|
if (efx_vfdi_flush_wake(vf))
|
|
|
|
wake_up(&vf->flush_waitq);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_rx_flush_done(struct efx_nic *efx, efx_qword_t *event)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf;
|
|
|
|
unsigned ev_failed, queue, qid;
|
|
|
|
|
|
|
|
queue = EFX_QWORD_FIELD(*event, FSF_AZ_DRIVER_EV_RX_DESCQ_ID);
|
|
|
|
ev_failed = EFX_QWORD_FIELD(*event,
|
|
|
|
FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL);
|
|
|
|
if (map_vi_index(efx, queue, &vf, &qid))
|
|
|
|
return;
|
|
|
|
if (!test_bit(qid, vf->rxq_mask))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (ev_failed) {
|
|
|
|
set_bit(qid, vf->rxq_retry_mask);
|
|
|
|
atomic_inc(&vf->rxq_retry_count);
|
|
|
|
} else {
|
|
|
|
__clear_bit(qid, vf->rxq_mask);
|
|
|
|
--vf->rxq_count;
|
|
|
|
}
|
|
|
|
if (efx_vfdi_flush_wake(vf))
|
|
|
|
wake_up(&vf->flush_waitq);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Called from napi. Schedule the reset work item */
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_desc_fetch_err(struct efx_nic *efx, unsigned dmaq)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_vf *vf;
|
|
|
|
unsigned int rel;
|
|
|
|
|
|
|
|
if (map_vi_index(efx, dmaq, &vf, &rel))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (net_ratelimit())
|
|
|
|
netif_err(efx, hw, efx->net_dev,
|
|
|
|
"VF %d DMA Q %d reports descriptor fetch error.\n",
|
|
|
|
vf->index, rel);
|
|
|
|
queue_work(vfdi_workqueue, &vf->reset_work);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset all VFs */
|
2014-11-05 20:16:32 +08:00
|
|
|
void efx_siena_sriov_reset(struct efx_nic *efx)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
unsigned int vf_i;
|
|
|
|
struct efx_buffer buf;
|
|
|
|
struct efx_vf *vf;
|
|
|
|
|
|
|
|
ASSERT_RTNL();
|
|
|
|
|
|
|
|
if (efx->vf_init_count == 0)
|
|
|
|
return;
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_usrev(efx, true);
|
|
|
|
(void)efx_siena_sriov_cmd(efx, true, NULL, NULL);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
|
2012-09-19 04:59:52 +08:00
|
|
|
if (efx_nic_alloc_buffer(efx, &buf, EFX_PAGE_SIZE, GFP_NOIO))
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
for (vf_i = 0; vf_i < efx->vf_init_count; ++vf_i) {
|
|
|
|
vf = efx->vf + vf_i;
|
2014-11-05 20:16:32 +08:00
|
|
|
efx_siena_sriov_reset_vf(vf, &buf);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
efx_nic_free_buffer(efx, &buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
int efx_init_sriov(void)
|
|
|
|
{
|
2014-11-05 20:16:32 +08:00
|
|
|
/* A single threaded workqueue is sufficient. efx_siena_sriov_vfdi() and
|
|
|
|
* efx_siena_sriov_peer_work() spend almost all their time sleeping for
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
* MCDI to complete anyway
|
|
|
|
*/
|
|
|
|
vfdi_workqueue = create_singlethread_workqueue("sfc_vfdi");
|
|
|
|
if (!vfdi_workqueue)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void efx_fini_sriov(void)
|
|
|
|
{
|
|
|
|
destroy_workqueue(vfdi_workqueue);
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
int efx_siena_sriov_set_vf_mac(struct net_device *net_dev, int vf_i, u8 *mac)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = netdev_priv(net_dev);
|
|
|
|
struct efx_vf *vf;
|
|
|
|
|
|
|
|
if (vf_i >= efx->vf_init_count)
|
|
|
|
return -EINVAL;
|
|
|
|
vf = efx->vf + vf_i;
|
|
|
|
|
|
|
|
mutex_lock(&vf->status_lock);
|
2014-03-08 02:27:41 +08:00
|
|
|
ether_addr_copy(vf->addr.mac_addr, mac);
|
2014-11-05 20:16:32 +08:00
|
|
|
__efx_siena_sriov_update_vf_addr(vf);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
mutex_unlock(&vf->status_lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
int efx_siena_sriov_set_vf_vlan(struct net_device *net_dev, int vf_i,
|
|
|
|
u16 vlan, u8 qos)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = netdev_priv(net_dev);
|
|
|
|
struct efx_vf *vf;
|
|
|
|
u16 tci;
|
|
|
|
|
|
|
|
if (vf_i >= efx->vf_init_count)
|
|
|
|
return -EINVAL;
|
|
|
|
vf = efx->vf + vf_i;
|
|
|
|
|
|
|
|
mutex_lock(&vf->status_lock);
|
|
|
|
tci = (vlan & VLAN_VID_MASK) | ((qos & 0x7) << VLAN_PRIO_SHIFT);
|
|
|
|
vf->addr.tci = htons(tci);
|
2014-11-05 20:16:32 +08:00
|
|
|
__efx_siena_sriov_update_vf_addr(vf);
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
mutex_unlock(&vf->status_lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
int efx_siena_sriov_set_vf_spoofchk(struct net_device *net_dev, int vf_i,
|
|
|
|
bool spoofchk)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = netdev_priv(net_dev);
|
|
|
|
struct efx_vf *vf;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (vf_i >= efx->vf_init_count)
|
|
|
|
return -EINVAL;
|
|
|
|
vf = efx->vf + vf_i;
|
|
|
|
|
|
|
|
mutex_lock(&vf->txq_lock);
|
|
|
|
if (vf->txq_count == 0) {
|
|
|
|
vf->tx_filter_mode =
|
|
|
|
spoofchk ? VF_TX_FILTER_ON : VF_TX_FILTER_OFF;
|
|
|
|
rc = 0;
|
|
|
|
} else {
|
|
|
|
/* This cannot be changed while TX queues are running */
|
|
|
|
rc = -EBUSY;
|
|
|
|
}
|
|
|
|
mutex_unlock(&vf->txq_lock);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2014-11-05 20:16:32 +08:00
|
|
|
int efx_siena_sriov_get_vf_config(struct net_device *net_dev, int vf_i,
|
|
|
|
struct ifla_vf_info *ivi)
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
{
|
|
|
|
struct efx_nic *efx = netdev_priv(net_dev);
|
|
|
|
struct efx_vf *vf;
|
|
|
|
u16 tci;
|
|
|
|
|
|
|
|
if (vf_i >= efx->vf_init_count)
|
|
|
|
return -EINVAL;
|
|
|
|
vf = efx->vf + vf_i;
|
|
|
|
|
|
|
|
ivi->vf = vf_i;
|
2014-03-08 02:27:41 +08:00
|
|
|
ether_addr_copy(ivi->mac, vf->addr.mac_addr);
|
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
to have a bandwidth of at least this value.
max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
of up to this value.
o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
which takes 4 arguments:
netdev, VF number, min_tx_rate, max_tx_rate
o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.
o Drivers that currently implement ndo_set_vf_tx_rate should now call
ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
implemented by driver.
o If user enters only one of either min_tx_rate or max_tx_rate, then,
userland should read back the other value from driver and set both
for IFLA_VF_RATE.
Drivers that have not yet implemented IFLA_VF_RATE should always
return min_tx_rate as 0 when read from ip tool.
o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
IFLA_VF_RATE should override.
o Idea is to have consistent display of rate values to user.
o Usage example: -
./ip link set p4p1 vf 0 rate 900
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 600 rate 300
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 21:59:05 +08:00
|
|
|
ivi->max_tx_rate = 0;
|
|
|
|
ivi->min_tx_rate = 0;
|
sfc: Add SR-IOV back-end support for SFC9000 family
On the SFC9000 family, each port has 1024 Virtual Interfaces (VIs),
each with an RX queue, a TX queue, an event queue and a mailbox
register. These may be assigned to up to 127 SR-IOV virtual functions
per port, with up to 64 VIs per VF.
We allocate an extra channel (IRQ and event queue only) to receive
requests from VF drivers.
There is a per-port limit of 4 concurrent RX queue flushes, and queue
flushes may be initiated by the MC in response to a Function Level
Reset (FLR) of a VF. Therefore, when SR-IOV is in use, we submit all
flush requests via the MC.
The RSS indirection table is shared with VFs, so the number of RX
queues used in the PF is limited to the number of VIs per VF.
This is almost entirely the work of Steve Hodgson, formerly
shodgson@solarflare.com.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-14 08:48:07 +08:00
|
|
|
tci = ntohs(vf->addr.tci);
|
|
|
|
ivi->vlan = tci & VLAN_VID_MASK;
|
|
|
|
ivi->qos = (tci >> VLAN_PRIO_SHIFT) & 0x7;
|
|
|
|
ivi->spoofchk = vf->tx_filter_mode == VF_TX_FILTER_ON;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|