linux_old1/net/ipv4/xfrm4_input.c

159 lines
3.9 KiB
C
Raw Normal View History

/*
* xfrm4_input.c
*
* Changes:
* YOSHIFUJI Hideaki @USAGI
* Split up af-specific portion
* Derek Atkins <derek@ihtfp.com>
* Add Encapsulation support
*
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <net/ip.h>
#include <net/xfrm.h>
int xfrm4_extract_input(struct xfrm_state *x, struct sk_buff *skb)
{
return xfrm4_extract_header(skb);
}
static inline int xfrm4_rcv_encap_finish(struct sock *sk, struct sk_buff *skb)
{
if (!skb_dst(skb)) {
const struct iphdr *iph = ip_hdr(skb);
if (ip_route_input_noref(skb, iph->daddr, iph->saddr,
iph->tos, skb->dev))
goto drop;
}
return dst_input(skb);
drop:
kfree_skb(skb);
return NET_RX_DROP;
}
int xfrm4_transport_finish(struct sk_buff *skb, int async)
{
struct iphdr *iph = ip_hdr(skb);
iph->protocol = XFRM_MODE_SKB_CB(skb)->protocol;
#ifndef CONFIG_NETFILTER
if (!async)
return -iph->protocol;
#endif
__skb_push(skb, skb->data - skb_network_header(skb));
iph->tot_len = htons(skb->len);
ip_send_check(iph);
NF_HOOK(NFPROTO_IPV4, NF_INET_PRE_ROUTING, NULL, skb,
skb->dev, NULL,
xfrm4_rcv_encap_finish);
return 0;
}
/* If it's a keepalive packet, then just eat it.
* If it's an encapsulated packet, then pass it to the
* IPsec xfrm input.
* Returns 0 if skb passed to xfrm or was dropped.
* Returns >0 if skb should be passed to UDP.
* Returns <0 if skb should be resubmitted (-ret is protocol)
*/
int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb)
{
struct udp_sock *up = udp_sk(sk);
struct udphdr *uh;
struct iphdr *iph;
int iphlen, len;
__u8 *udpdata;
__be32 *udpdata32;
__u16 encap_type = up->encap_type;
/* if this is not encapsulated socket, then just return now */
if (!encap_type)
return 1;
/* If this is a paged skb, make sure we pull up
* whatever data we need to look at. */
len = skb->len - sizeof(struct udphdr);
if (!pskb_may_pull(skb, sizeof(struct udphdr) + min(len, 8)))
return 1;
/* Now we can get the pointers */
uh = udp_hdr(skb);
udpdata = (__u8 *)uh + sizeof(struct udphdr);
udpdata32 = (__be32 *)udpdata;
switch (encap_type) {
default:
case UDP_ENCAP_ESPINUDP:
/* Check if this is a keepalive packet. If so, eat it. */
if (len == 1 && udpdata[0] == 0xff) {
goto drop;
} else if (len > sizeof(struct ip_esp_hdr) && udpdata32[0] != 0) {
/* ESP Packet without Non-ESP header */
len = sizeof(struct udphdr);
} else
/* Must be an IKE packet.. pass it through */
return 1;
break;
case UDP_ENCAP_ESPINUDP_NON_IKE:
/* Check if this is a keepalive packet. If so, eat it. */
if (len == 1 && udpdata[0] == 0xff) {
goto drop;
} else if (len > 2 * sizeof(u32) + sizeof(struct ip_esp_hdr) &&
udpdata32[0] == 0 && udpdata32[1] == 0) {
/* ESP Packet with Non-IKE marker */
len = sizeof(struct udphdr) + 2 * sizeof(u32);
} else
/* Must be an IKE packet.. pass it through */
return 1;
break;
}
/* At this point we are sure that this is an ESPinUDP packet,
* so we need to remove 'len' bytes from the packet (the UDP
* header and optional ESP marker bytes) and then modify the
* protocol to ESP, and then call into the transform receiver.
*/
if (skb_unclone(skb, GFP_ATOMIC))
goto drop;
/* Now we can update and verify the packet length... */
iph = ip_hdr(skb);
iphlen = iph->ihl << 2;
iph->tot_len = htons(ntohs(iph->tot_len) - len);
if (skb->len < iphlen + len) {
/* packet is too small!?! */
goto drop;
}
/* pull the data buffer up to the ESP header and set the
* transport header to point to ESP. Keep UDP on the stack
* for later.
*/
__skb_pull(skb, len);
skb_reset_transport_header(skb);
/* process ESP */
return xfrm4_rcv_encap(skb, IPPROTO_ESP, 0, encap_type);
drop:
kfree_skb(skb);
return 0;
}
int xfrm4_rcv(struct sk_buff *skb)
{
return xfrm4_rcv_spi(skb, ip_hdr(skb)->protocol, 0);
}
EXPORT_SYMBOL(xfrm4_rcv);