linux_old1/include/linux/timex.h

/*****************************************************************************
 *                                                                           *
 * Copyright (c) David L. Mills 1993                                         *
 *                                                                           *
 * Permission to use, copy, modify, and distribute this software and its     *
 * documentation for any purpose and without fee is hereby granted, provided *
 * that the above copyright notice appears in all copies and that both the   *
 * copyright notice and this permission notice appear in supporting          *
 * documentation, and that the name University of Delaware not be used in    *
 * advertising or publicity pertaining to distribution of the software       *
 * without specific, written prior permission.  The University of Delaware   *
 * makes no representations about the suitability this software for any      *
 * purpose.  It is provided "as is" without express or implied warranty.     *
 *                                                                           *
 *****************************************************************************/

/*
 * Modification history timex.h
 *
 * 29 Dec 97	Russell King
 *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
 *	for ARM machines
 *
 *  9 Jan 97    Adrian Sun
 *      Shifted LATCH define to allow access to alpha machines.
 *
 * 26 Sep 94	David L. Mills
 *	Added defines for hybrid phase/frequency-lock loop.
 *
 * 19 Mar 94	David L. Mills
 *	Moved defines from kernel routines to header file and added new
 *	defines for PPS phase-lock loop.
 *
 * 20 Feb 94	David L. Mills
 *	Revised status codes and structures for external clock and PPS
 *	signal discipline.
 *
 * 28 Nov 93	David L. Mills
 *	Adjusted parameters to improve stability and increase poll
 *	interval.
 *
 * 17 Sep 93    David L. Mills
 *      Created file $NTP/include/sys/timex.h
 * 07 Oct 93    Torsten Duwe
 *      Derived linux/timex.h
 * 1995-08-13    Torsten Duwe
 *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
 * 1997-08-30    Ulrich Windl
 *      Added new constant NTP_PHASE_LIMIT
 * 2004-08-12    Christoph Lameter
 *      Reworked time interpolation logic
 */
#ifndef _LINUX_TIMEX_H
#define _LINUX_TIMEX_H

#include <uapi/linux/timex.h>

#define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
#define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
#define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/param.h>

#include <asm/timex.h>

/*
 * SHIFT_PLL is used as a dampening factor to define how much we
 * adjust the frequency correction for a given offset in PLL mode.
 * It also used in dampening the offset correction, to define how
 * much of the current value in time_offset we correct for each
 * second. Changing this value changes the stiffness of the ntp
 * adjustment code. A lower value makes it more flexible, reducing
 * NTP convergence time. A higher value makes it stiffer, increasing
 * convergence time, but making the clock more stable.
 *
 * In David Mills' nanokernel reference implementation SHIFT_PLL is 4.
 * However this seems to increase convergence time much too long.
 *
 * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html
 *
 * In the above mailing list discussion, it seems the value of 4
 * was appropriate for other Unix systems with HZ=100, and that
 * SHIFT_PLL should be decreased as HZ increases. However, Linux's
 * clock steering implementation is HZ independent.
 *
 * Through experimentation, a SHIFT_PLL value of 2 was found to allow
 * for fast convergence (very similar to the NTPv3 code used prior to
 * v2.6.19), with good clock stability.
 *
 *
 * SHIFT_FLL is used as a dampening factor to define how much we
 * adjust the frequency correction for a given offset in FLL mode.
 * In David Mills' nanokernel reference implementation SHIFT_FLL is 2.
 *
 * MAXTC establishes the maximum time constant of the PLL.
 */
#define SHIFT_PLL	2	/* PLL frequency factor (shift) */
#define SHIFT_FLL	2	/* FLL frequency factor (shift) */
#define MAXTC		10	/* maximum time constant (shift) */

/*
 * SHIFT_USEC defines the scaling (shift) of the time_freq and
 * time_tolerance variables, which represent the current frequency
 * offset and maximum frequency tolerance.
 */
#define SHIFT_USEC 16		/* frequency offset scale (shift) */
#define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
#define PPM_SCALE_INV_SHIFT 19
#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
		       PPM_SCALE + 1)

#define MAXPHASE 500000000L	/* max phase error (ns) */
#define MAXFREQ 500000		/* max frequency error (ns/s) */
#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
#define MINSEC 256		/* min interval between updates (s) */
#define MAXSEC 2048		/* max interval between updates (s) */
#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */

/*
 * kernel variables
 * Note: maximum error = NTP synch distance = dispersion + delay / 2;
 * estimated error = NTP dispersion.
 */
extern unsigned long tick_usec;		/* USER_HZ period (usec) */
extern unsigned long tick_nsec;		/* SHIFTED_HZ period (nsec) */

extern void ntp_init(void);
extern void ntp_clear(void);

/* Required to safely shift negative values */
#define shift_right(x, s) ({	\
	__typeof__(x) __x = (x);	\
	__typeof__(s) __s = (s);	\
	__x < 0 ? -(-__x >> __s) : __x >> __s;	\
})

#define NTP_SCALE_SHIFT		32

#define NTP_INTERVAL_FREQ  (HZ)
#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)

/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
extern u64 ntp_tick_length(void);

extern int second_overflow(unsigned long secs);
extern int do_adjtimex(struct timex *);
extern void hardpps(const struct timespec *, const struct timespec *);

int read_current_timer(unsigned long *timer_val);

/* The clock frequency of the i8253/i8254 PIT */
#define PIT_TICK_RATE 1193182ul

#endif /* LINUX_TIMEX_H */