linux_old1/drivers/pinctrl/pinctrl-single.c

2061 lines
49 KiB
C
Raw Normal View History

/*
* Generic device tree based pinctrl driver for one register per pin
* type pinmux controllers
*
* Copyright (C) 2012 Texas Instruments, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/list.h>
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
#include <linux/of_irq.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pinctrl-single.h>
#include "core.h"
#include "pinconf.h"
#define DRIVER_NAME "pinctrl-single"
#define PCS_MUX_PINS_NAME "pinctrl-single,pins"
#define PCS_MUX_BITS_NAME "pinctrl-single,bits"
#define PCS_REG_NAME_LEN ((sizeof(unsigned long) * 2) + 3)
#define PCS_OFF_DISABLED ~0U
/**
* struct pcs_pingroup - pingroups for a function
* @np: pingroup device node pointer
* @name: pingroup name
* @gpins: array of the pins in the group
* @ngpins: number of pins in the group
* @node: list node
*/
struct pcs_pingroup {
struct device_node *np;
const char *name;
int *gpins;
int ngpins;
struct list_head node;
};
/**
* struct pcs_func_vals - mux function register offset and value pair
* @reg: register virtual address
* @val: register value
*/
struct pcs_func_vals {
void __iomem *reg;
unsigned val;
unsigned mask;
};
/**
* struct pcs_conf_vals - pinconf parameter, pinconf register offset
* and value, enable, disable, mask
* @param: config parameter
* @val: user input bits in the pinconf register
* @enable: enable bits in the pinconf register
* @disable: disable bits in the pinconf register
* @mask: mask bits in the register value
*/
struct pcs_conf_vals {
enum pin_config_param param;
unsigned val;
unsigned enable;
unsigned disable;
unsigned mask;
};
/**
* struct pcs_conf_type - pinconf property name, pinconf param pair
* @name: property name in DTS file
* @param: config parameter
*/
struct pcs_conf_type {
const char *name;
enum pin_config_param param;
};
/**
* struct pcs_function - pinctrl function
* @name: pinctrl function name
* @vals: register and vals array
* @nvals: number of entries in vals array
* @pgnames: array of pingroup names the function uses
* @npgnames: number of pingroup names the function uses
* @node: list node
*/
struct pcs_function {
const char *name;
struct pcs_func_vals *vals;
unsigned nvals;
const char **pgnames;
int npgnames;
struct pcs_conf_vals *conf;
int nconfs;
struct list_head node;
};
/**
* struct pcs_gpiofunc_range - pin ranges with same mux value of gpio function
* @offset: offset base of pins
* @npins: number pins with the same mux value of gpio function
* @gpiofunc: mux value of gpio function
* @node: list node
*/
struct pcs_gpiofunc_range {
unsigned offset;
unsigned npins;
unsigned gpiofunc;
struct list_head node;
};
/**
* struct pcs_data - wrapper for data needed by pinctrl framework
* @pa: pindesc array
* @cur: index to current element
*
* REVISIT: We should be able to drop this eventually by adding
* support for registering pins individually in the pinctrl
* framework for those drivers that don't need a static array.
*/
struct pcs_data {
struct pinctrl_pin_desc *pa;
int cur;
};
/**
* struct pcs_name - register name for a pin
* @name: name of the pinctrl register
*
* REVISIT: We may want to make names optional in the pinctrl
* framework as some drivers may not care about pin names to
* avoid kernel bloat. The pin names can be deciphered by user
* space tools using debugfs based on the register address and
* SoC packaging information.
*/
struct pcs_name {
char name[PCS_REG_NAME_LEN];
};
/**
* struct pcs_soc_data - SoC specific settings
* @flags: initial SoC specific PCS_FEAT_xxx values
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
* @irq: optional interrupt for the controller
* @irq_enable_mask: optional SoC specific interrupt enable mask
* @irq_status_mask: optional SoC specific interrupt status mask
* @rearm: optional SoC specific wake-up rearm function
*/
struct pcs_soc_data {
unsigned flags;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
int irq;
unsigned irq_enable_mask;
unsigned irq_status_mask;
void (*rearm)(void);
};
/**
* struct pcs_device - pinctrl device instance
* @res: resources
* @base: virtual address of the controller
* @size: size of the ioremapped area
* @dev: device entry
* @pctl: pin controller device
* @flags: mask of PCS_FEAT_xxx values
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
* @lock: spinlock for register access
* @mutex: mutex protecting the lists
* @width: bits per mux register
* @fmask: function register mask
* @fshift: function register shift
* @foff: value to turn mux off
* @fmax: max number of functions in fmask
* @bits_per_pin:number of bits per pin
* @names: array of register names for pins
* @pins: physical pins on the SoC
* @pgtree: pingroup index radix tree
* @ftree: function index radix tree
* @pingroups: list of pingroups
* @functions: list of functions
* @gpiofuncs: list of gpio functions
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
* @irqs: list of interrupt registers
* @chip: chip container for this instance
* @domain: IRQ domain for this instance
* @ngroups: number of pingroups
* @nfuncs: number of functions
* @desc: pin controller descriptor
* @read: register read function to use
* @write: register write function to use
*/
struct pcs_device {
struct resource *res;
void __iomem *base;
unsigned size;
struct device *dev;
struct pinctrl_dev *pctl;
unsigned flags;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
#define PCS_QUIRK_SHARED_IRQ (1 << 2)
#define PCS_FEAT_IRQ (1 << 1)
#define PCS_FEAT_PINCONF (1 << 0)
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
struct pcs_soc_data socdata;
raw_spinlock_t lock;
struct mutex mutex;
unsigned width;
unsigned fmask;
unsigned fshift;
unsigned foff;
unsigned fmax;
bool bits_per_mux;
unsigned bits_per_pin;
struct pcs_name *names;
struct pcs_data pins;
struct radix_tree_root pgtree;
struct radix_tree_root ftree;
struct list_head pingroups;
struct list_head functions;
struct list_head gpiofuncs;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
struct list_head irqs;
struct irq_chip chip;
struct irq_domain *domain;
unsigned ngroups;
unsigned nfuncs;
struct pinctrl_desc desc;
unsigned (*read)(void __iomem *reg);
void (*write)(unsigned val, void __iomem *reg);
};
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
#define PCS_QUIRK_HAS_SHARED_IRQ (pcs->flags & PCS_QUIRK_SHARED_IRQ)
#define PCS_HAS_IRQ (pcs->flags & PCS_FEAT_IRQ)
#define PCS_HAS_PINCONF (pcs->flags & PCS_FEAT_PINCONF)
static int pcs_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *config);
static int pcs_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *configs, unsigned num_configs);
static enum pin_config_param pcs_bias[] = {
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_PULL_UP,
};
/*
* REVISIT: Reads and writes could eventually use regmap or something
* generic. But at least on omaps, some mux registers are performance
* critical as they may need to be remuxed every time before and after
* idle. Adding tests for register access width for every read and
* write like regmap is doing is not desired, and caching the registers
* does not help in this case.
*/
static unsigned __maybe_unused pcs_readb(void __iomem *reg)
{
return readb(reg);
}
static unsigned __maybe_unused pcs_readw(void __iomem *reg)
{
return readw(reg);
}
static unsigned __maybe_unused pcs_readl(void __iomem *reg)
{
return readl(reg);
}
static void __maybe_unused pcs_writeb(unsigned val, void __iomem *reg)
{
writeb(val, reg);
}
static void __maybe_unused pcs_writew(unsigned val, void __iomem *reg)
{
writew(val, reg);
}
static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
{
writel(val, reg);
}
static int pcs_get_groups_count(struct pinctrl_dev *pctldev)
{
struct pcs_device *pcs;
pcs = pinctrl_dev_get_drvdata(pctldev);
return pcs->ngroups;
}
static const char *pcs_get_group_name(struct pinctrl_dev *pctldev,
unsigned gselector)
{
struct pcs_device *pcs;
struct pcs_pingroup *group;
pcs = pinctrl_dev_get_drvdata(pctldev);
group = radix_tree_lookup(&pcs->pgtree, gselector);
if (!group) {
dev_err(pcs->dev, "%s could not find pingroup%i\n",
__func__, gselector);
return NULL;
}
return group->name;
}
static int pcs_get_group_pins(struct pinctrl_dev *pctldev,
unsigned gselector,
const unsigned **pins,
unsigned *npins)
{
struct pcs_device *pcs;
struct pcs_pingroup *group;
pcs = pinctrl_dev_get_drvdata(pctldev);
group = radix_tree_lookup(&pcs->pgtree, gselector);
if (!group) {
dev_err(pcs->dev, "%s could not find pingroup%i\n",
__func__, gselector);
return -EINVAL;
}
*pins = group->gpins;
*npins = group->ngpins;
return 0;
}
static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned pin)
{
struct pcs_device *pcs;
unsigned val, mux_bytes;
pcs = pinctrl_dev_get_drvdata(pctldev);
mux_bytes = pcs->width / BITS_PER_BYTE;
val = pcs->read(pcs->base + pin * mux_bytes);
seq_printf(s, "%08x %s " , val, DRIVER_NAME);
}
static void pcs_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
struct pcs_device *pcs;
pcs = pinctrl_dev_get_drvdata(pctldev);
devm_kfree(pcs->dev, map);
}
static int pcs_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config,
struct pinctrl_map **map, unsigned *num_maps);
static const struct pinctrl_ops pcs_pinctrl_ops = {
.get_groups_count = pcs_get_groups_count,
.get_group_name = pcs_get_group_name,
.get_group_pins = pcs_get_group_pins,
.pin_dbg_show = pcs_pin_dbg_show,
.dt_node_to_map = pcs_dt_node_to_map,
.dt_free_map = pcs_dt_free_map,
};
static int pcs_get_functions_count(struct pinctrl_dev *pctldev)
{
struct pcs_device *pcs;
pcs = pinctrl_dev_get_drvdata(pctldev);
return pcs->nfuncs;
}
static const char *pcs_get_function_name(struct pinctrl_dev *pctldev,
unsigned fselector)
{
struct pcs_device *pcs;
struct pcs_function *func;
pcs = pinctrl_dev_get_drvdata(pctldev);
func = radix_tree_lookup(&pcs->ftree, fselector);
if (!func) {
dev_err(pcs->dev, "%s could not find function%i\n",
__func__, fselector);
return NULL;
}
return func->name;
}
static int pcs_get_function_groups(struct pinctrl_dev *pctldev,
unsigned fselector,
const char * const **groups,
unsigned * const ngroups)
{
struct pcs_device *pcs;
struct pcs_function *func;
pcs = pinctrl_dev_get_drvdata(pctldev);
func = radix_tree_lookup(&pcs->ftree, fselector);
if (!func) {
dev_err(pcs->dev, "%s could not find function%i\n",
__func__, fselector);
return -EINVAL;
}
*groups = func->pgnames;
*ngroups = func->npgnames;
return 0;
}
static int pcs_get_function(struct pinctrl_dev *pctldev, unsigned pin,
struct pcs_function **func)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pin_desc *pdesc = pin_desc_get(pctldev, pin);
const struct pinctrl_setting_mux *setting;
unsigned fselector;
/* If pin is not described in DTS & enabled, mux_setting is NULL. */
setting = pdesc->mux_setting;
if (!setting)
return -ENOTSUPP;
fselector = setting->func;
*func = radix_tree_lookup(&pcs->ftree, fselector);
if (!(*func)) {
dev_err(pcs->dev, "%s could not find function%i\n",
__func__, fselector);
return -ENOTSUPP;
}
return 0;
}
static int pcs_enable(struct pinctrl_dev *pctldev, unsigned fselector,
unsigned group)
{
struct pcs_device *pcs;
struct pcs_function *func;
int i;
pcs = pinctrl_dev_get_drvdata(pctldev);
/* If function mask is null, needn't enable it. */
if (!pcs->fmask)
return 0;
func = radix_tree_lookup(&pcs->ftree, fselector);
if (!func)
return -EINVAL;
dev_dbg(pcs->dev, "enabling %s function%i\n",
func->name, fselector);
for (i = 0; i < func->nvals; i++) {
struct pcs_func_vals *vals;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
unsigned long flags;
unsigned val, mask;
vals = &func->vals[i];
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
raw_spin_lock_irqsave(&pcs->lock, flags);
val = pcs->read(vals->reg);
if (pcs->bits_per_mux)
mask = vals->mask;
else
mask = pcs->fmask;
val &= ~mask;
val |= (vals->val & mask);
pcs->write(val, vals->reg);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
raw_spin_unlock_irqrestore(&pcs->lock, flags);
}
return 0;
}
static void pcs_disable(struct pinctrl_dev *pctldev, unsigned fselector,
unsigned group)
{
struct pcs_device *pcs;
struct pcs_function *func;
int i;
pcs = pinctrl_dev_get_drvdata(pctldev);
/* If function mask is null, needn't disable it. */
if (!pcs->fmask)
return;
func = radix_tree_lookup(&pcs->ftree, fselector);
if (!func) {
dev_err(pcs->dev, "%s could not find function%i\n",
__func__, fselector);
return;
}
/*
* Ignore disable if function-off is not specified. Some hardware
* does not have clearly defined disable function. For pin specific
* off modes, you can use alternate named states as described in
* pinctrl-bindings.txt.
*/
if (pcs->foff == PCS_OFF_DISABLED) {
dev_dbg(pcs->dev, "ignoring disable for %s function%i\n",
func->name, fselector);
return;
}
dev_dbg(pcs->dev, "disabling function%i %s\n",
fselector, func->name);
for (i = 0; i < func->nvals; i++) {
struct pcs_func_vals *vals;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
unsigned long flags;
unsigned val, mask;
vals = &func->vals[i];
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
raw_spin_lock_irqsave(&pcs->lock, flags);
val = pcs->read(vals->reg);
if (pcs->bits_per_mux)
mask = vals->mask;
else
mask = pcs->fmask;
val &= ~mask;
val |= pcs->foff << pcs->fshift;
pcs->write(val, vals->reg);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
raw_spin_unlock_irqrestore(&pcs->lock, flags);
}
}
static int pcs_request_gpio(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned pin)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_gpiofunc_range *frange = NULL;
struct list_head *pos, *tmp;
int mux_bytes = 0;
unsigned data;
/* If function mask is null, return directly. */
if (!pcs->fmask)
return -ENOTSUPP;
list_for_each_safe(pos, tmp, &pcs->gpiofuncs) {
frange = list_entry(pos, struct pcs_gpiofunc_range, node);
if (pin >= frange->offset + frange->npins
|| pin < frange->offset)
continue;
mux_bytes = pcs->width / BITS_PER_BYTE;
data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask;
data |= frange->gpiofunc;
pcs->write(data, pcs->base + pin * mux_bytes);
break;
}
return 0;
}
static const struct pinmux_ops pcs_pinmux_ops = {
.get_functions_count = pcs_get_functions_count,
.get_function_name = pcs_get_function_name,
.get_function_groups = pcs_get_function_groups,
.enable = pcs_enable,
.disable = pcs_disable,
.gpio_request_enable = pcs_request_gpio,
};
/* Clear BIAS value */
static void pcs_pinconf_clear_bias(struct pinctrl_dev *pctldev, unsigned pin)
{
unsigned long config;
int i;
for (i = 0; i < ARRAY_SIZE(pcs_bias); i++) {
config = pinconf_to_config_packed(pcs_bias[i], 0);
pcs_pinconf_set(pctldev, pin, &config, 1);
}
}
/*
* Check whether PIN_CONFIG_BIAS_DISABLE is valid.
* It's depend on that PULL_DOWN & PULL_UP configs are all invalid.
*/
static bool pcs_pinconf_bias_disable(struct pinctrl_dev *pctldev, unsigned pin)
{
unsigned long config;
int i;
for (i = 0; i < ARRAY_SIZE(pcs_bias); i++) {
config = pinconf_to_config_packed(pcs_bias[i], 0);
if (!pcs_pinconf_get(pctldev, pin, &config))
goto out;
}
return true;
out:
return false;
}
static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
unsigned pin, unsigned long *config)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_function *func;
enum pin_config_param param;
unsigned offset = 0, data = 0, i, j, ret;
ret = pcs_get_function(pctldev, pin, &func);
if (ret)
return ret;
for (i = 0; i < func->nconfs; i++) {
param = pinconf_to_config_param(*config);
if (param == PIN_CONFIG_BIAS_DISABLE) {
if (pcs_pinconf_bias_disable(pctldev, pin)) {
*config = 0;
return 0;
} else {
return -ENOTSUPP;
}
} else if (param != func->conf[i].param) {
continue;
}
offset = pin * (pcs->width / BITS_PER_BYTE);
data = pcs->read(pcs->base + offset) & func->conf[i].mask;
switch (func->conf[i].param) {
/* 4 parameters */
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if ((data != func->conf[i].enable) ||
(data == func->conf[i].disable))
return -ENOTSUPP;
*config = 0;
break;
/* 2 parameters */
case PIN_CONFIG_INPUT_SCHMITT:
for (j = 0; j < func->nconfs; j++) {
switch (func->conf[j].param) {
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (data != func->conf[j].enable)
return -ENOTSUPP;
break;
default:
break;
}
}
*config = data;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
default:
*config = data;
break;
}
return 0;
}
return -ENOTSUPP;
}
static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
unsigned pin, unsigned long *configs,
unsigned num_configs)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_function *func;
unsigned offset = 0, shift = 0, i, data, ret;
u16 arg;
int j;
ret = pcs_get_function(pctldev, pin, &func);
if (ret)
return ret;
for (j = 0; j < num_configs; j++) {
for (i = 0; i < func->nconfs; i++) {
if (pinconf_to_config_param(configs[j])
!= func->conf[i].param)
continue;
offset = pin * (pcs->width / BITS_PER_BYTE);
data = pcs->read(pcs->base + offset);
arg = pinconf_to_config_argument(configs[j]);
switch (func->conf[i].param) {
/* 2 parameters */
case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
shift = ffs(func->conf[i].mask) - 1;
data &= ~func->conf[i].mask;
data |= (arg << shift) & func->conf[i].mask;
break;
/* 4 parameters */
case PIN_CONFIG_BIAS_DISABLE:
pcs_pinconf_clear_bias(pctldev, pin);
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_UP:
if (arg)
pcs_pinconf_clear_bias(pctldev, pin);
/* fall through */
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
data &= ~func->conf[i].mask;
if (arg)
data |= func->conf[i].enable;
else
data |= func->conf[i].disable;
break;
default:
return -ENOTSUPP;
}
pcs->write(data, pcs->base + offset);
break;
}
if (i >= func->nconfs)
return -ENOTSUPP;
} /* for each config */
return 0;
}
static int pcs_pinconf_group_get(struct pinctrl_dev *pctldev,
unsigned group, unsigned long *config)
{
const unsigned *pins;
unsigned npins, old = 0;
int i, ret;
ret = pcs_get_group_pins(pctldev, group, &pins, &npins);
if (ret)
return ret;
for (i = 0; i < npins; i++) {
if (pcs_pinconf_get(pctldev, pins[i], config))
return -ENOTSUPP;
/* configs do not match between two pins */
if (i && (old != *config))
return -ENOTSUPP;
old = *config;
}
return 0;
}
static int pcs_pinconf_group_set(struct pinctrl_dev *pctldev,
unsigned group, unsigned long *configs,
unsigned num_configs)
{
const unsigned *pins;
unsigned npins;
int i, ret;
ret = pcs_get_group_pins(pctldev, group, &pins, &npins);
if (ret)
return ret;
for (i = 0; i < npins; i++) {
if (pcs_pinconf_set(pctldev, pins[i], configs, num_configs))
return -ENOTSUPP;
}
return 0;
}
static void pcs_pinconf_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin)
{
}
static void pcs_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned selector)
{
}
static void pcs_pinconf_config_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned long config)
{
pinconf_generic_dump_config(pctldev, s, config);
}
static const struct pinconf_ops pcs_pinconf_ops = {
.pin_config_get = pcs_pinconf_get,
.pin_config_set = pcs_pinconf_set,
.pin_config_group_get = pcs_pinconf_group_get,
.pin_config_group_set = pcs_pinconf_group_set,
.pin_config_dbg_show = pcs_pinconf_dbg_show,
.pin_config_group_dbg_show = pcs_pinconf_group_dbg_show,
.pin_config_config_dbg_show = pcs_pinconf_config_dbg_show,
.is_generic = true,
};
/**
* pcs_add_pin() - add a pin to the static per controller pin array
* @pcs: pcs driver instance
* @offset: register offset from base
*/
static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
unsigned pin_pos)
{
struct pinctrl_pin_desc *pin;
struct pcs_name *pn;
int i;
i = pcs->pins.cur;
if (i >= pcs->desc.npins) {
dev_err(pcs->dev, "too many pins, max %i\n",
pcs->desc.npins);
return -ENOMEM;
}
pin = &pcs->pins.pa[i];
pn = &pcs->names[i];
sprintf(pn->name, "%lx.%d",
(unsigned long)pcs->res->start + offset, pin_pos);
pin->name = pn->name;
pin->number = i;
pcs->pins.cur++;
return i;
}
/**
* pcs_allocate_pin_table() - adds all the pins for the pinctrl driver
* @pcs: pcs driver instance
*
* In case of errors, resources are freed in pcs_free_resources.
*
* If your hardware needs holes in the address space, then just set
* up multiple driver instances.
*/
static int pcs_allocate_pin_table(struct pcs_device *pcs)
{
int mux_bytes, nr_pins, i;
int num_pins_in_register = 0;
mux_bytes = pcs->width / BITS_PER_BYTE;
if (pcs->bits_per_mux) {
pcs->bits_per_pin = fls(pcs->fmask);
nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin;
num_pins_in_register = pcs->width / pcs->bits_per_pin;
} else {
nr_pins = pcs->size / mux_bytes;
}
dev_dbg(pcs->dev, "allocating %i pins\n", nr_pins);
pcs->pins.pa = devm_kzalloc(pcs->dev,
sizeof(*pcs->pins.pa) * nr_pins,
GFP_KERNEL);
if (!pcs->pins.pa)
return -ENOMEM;
pcs->names = devm_kzalloc(pcs->dev,
sizeof(struct pcs_name) * nr_pins,
GFP_KERNEL);
if (!pcs->names)
return -ENOMEM;
pcs->desc.pins = pcs->pins.pa;
pcs->desc.npins = nr_pins;
for (i = 0; i < pcs->desc.npins; i++) {
unsigned offset;
int res;
int byte_num;
int pin_pos = 0;
if (pcs->bits_per_mux) {
byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
offset = (byte_num / mux_bytes) * mux_bytes;
pin_pos = i % num_pins_in_register;
} else {
offset = i * mux_bytes;
}
res = pcs_add_pin(pcs, offset, pin_pos);
if (res < 0) {
dev_err(pcs->dev, "error adding pins: %i\n", res);
return res;
}
}
return 0;
}
/**
* pcs_add_function() - adds a new function to the function list
* @pcs: pcs driver instance
* @np: device node of the mux entry
* @name: name of the function
* @vals: array of mux register value pairs used by the function
* @nvals: number of mux register value pairs
* @pgnames: array of pingroup names for the function
* @npgnames: number of pingroup names
*/
static struct pcs_function *pcs_add_function(struct pcs_device *pcs,
struct device_node *np,
const char *name,
struct pcs_func_vals *vals,
unsigned nvals,
const char **pgnames,
unsigned npgnames)
{
struct pcs_function *function;
function = devm_kzalloc(pcs->dev, sizeof(*function), GFP_KERNEL);
if (!function)
return NULL;
function->name = name;
function->vals = vals;
function->nvals = nvals;
function->pgnames = pgnames;
function->npgnames = npgnames;
mutex_lock(&pcs->mutex);
list_add_tail(&function->node, &pcs->functions);
radix_tree_insert(&pcs->ftree, pcs->nfuncs, function);
pcs->nfuncs++;
mutex_unlock(&pcs->mutex);
return function;
}
static void pcs_remove_function(struct pcs_device *pcs,
struct pcs_function *function)
{
int i;
mutex_lock(&pcs->mutex);
for (i = 0; i < pcs->nfuncs; i++) {
struct pcs_function *found;
found = radix_tree_lookup(&pcs->ftree, i);
if (found == function)
radix_tree_delete(&pcs->ftree, i);
}
list_del(&function->node);
mutex_unlock(&pcs->mutex);
}
/**
* pcs_add_pingroup() - add a pingroup to the pingroup list
* @pcs: pcs driver instance
* @np: device node of the mux entry
* @name: name of the pingroup
* @gpins: array of the pins that belong to the group
* @ngpins: number of pins in the group
*/
static int pcs_add_pingroup(struct pcs_device *pcs,
struct device_node *np,
const char *name,
int *gpins,
int ngpins)
{
struct pcs_pingroup *pingroup;
pingroup = devm_kzalloc(pcs->dev, sizeof(*pingroup), GFP_KERNEL);
if (!pingroup)
return -ENOMEM;
pingroup->name = name;
pingroup->np = np;
pingroup->gpins = gpins;
pingroup->ngpins = ngpins;
mutex_lock(&pcs->mutex);
list_add_tail(&pingroup->node, &pcs->pingroups);
radix_tree_insert(&pcs->pgtree, pcs->ngroups, pingroup);
pcs->ngroups++;
mutex_unlock(&pcs->mutex);
return 0;
}
/**
* pcs_get_pin_by_offset() - get a pin index based on the register offset
* @pcs: pcs driver instance
* @offset: register offset from the base
*
* Note that this is OK as long as the pins are in a static array.
*/
static int pcs_get_pin_by_offset(struct pcs_device *pcs, unsigned offset)
{
unsigned index;
if (offset >= pcs->size) {
dev_err(pcs->dev, "mux offset out of range: 0x%x (0x%x)\n",
offset, pcs->size);
return -EINVAL;
}
if (pcs->bits_per_mux)
index = (offset * BITS_PER_BYTE) / pcs->bits_per_pin;
else
index = offset / (pcs->width / BITS_PER_BYTE);
return index;
}
/*
* check whether data matches enable bits or disable bits
* Return value: 1 for matching enable bits, 0 for matching disable bits,
* and negative value for matching failure.
*/
static int pcs_config_match(unsigned data, unsigned enable, unsigned disable)
{
int ret = -EINVAL;
if (data == enable)
ret = 1;
else if (data == disable)
ret = 0;
return ret;
}
static void add_config(struct pcs_conf_vals **conf, enum pin_config_param param,
unsigned value, unsigned enable, unsigned disable,
unsigned mask)
{
(*conf)->param = param;
(*conf)->val = value;
(*conf)->enable = enable;
(*conf)->disable = disable;
(*conf)->mask = mask;
(*conf)++;
}
static void add_setting(unsigned long **setting, enum pin_config_param param,
unsigned arg)
{
**setting = pinconf_to_config_packed(param, arg);
(*setting)++;
}
/* add pinconf setting with 2 parameters */
static void pcs_add_conf2(struct pcs_device *pcs, struct device_node *np,
const char *name, enum pin_config_param param,
struct pcs_conf_vals **conf, unsigned long **settings)
{
unsigned value[2], shift;
int ret;
ret = of_property_read_u32_array(np, name, value, 2);
if (ret)
return;
/* set value & mask */
value[0] &= value[1];
shift = ffs(value[1]) - 1;
/* skip enable & disable */
add_config(conf, param, value[0], 0, 0, value[1]);
add_setting(settings, param, value[0] >> shift);
}
/* add pinconf setting with 4 parameters */
static void pcs_add_conf4(struct pcs_device *pcs, struct device_node *np,
const char *name, enum pin_config_param param,
struct pcs_conf_vals **conf, unsigned long **settings)
{
unsigned value[4];
int ret;
/* value to set, enable, disable, mask */
ret = of_property_read_u32_array(np, name, value, 4);
if (ret)
return;
if (!value[3]) {
dev_err(pcs->dev, "mask field of the property can't be 0\n");
return;
}
value[0] &= value[3];
value[1] &= value[3];
value[2] &= value[3];
ret = pcs_config_match(value[0], value[1], value[2]);
if (ret < 0)
dev_dbg(pcs->dev, "failed to match enable or disable bits\n");
add_config(conf, param, value[0], value[1], value[2], value[3]);
add_setting(settings, param, ret);
}
static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
struct pcs_function *func,
struct pinctrl_map **map)
{
struct pinctrl_map *m = *map;
int i = 0, nconfs = 0;
unsigned long *settings = NULL, *s = NULL;
struct pcs_conf_vals *conf = NULL;
struct pcs_conf_type prop2[] = {
{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
};
struct pcs_conf_type prop4[] = {
{ "pinctrl-single,bias-pullup", PIN_CONFIG_BIAS_PULL_UP, },
{ "pinctrl-single,bias-pulldown", PIN_CONFIG_BIAS_PULL_DOWN, },
{ "pinctrl-single,input-schmitt-enable",
PIN_CONFIG_INPUT_SCHMITT_ENABLE, },
};
/* If pinconf isn't supported, don't parse properties in below. */
if (!PCS_HAS_PINCONF)
return 0;
/* cacluate how much properties are supported in current node */
for (i = 0; i < ARRAY_SIZE(prop2); i++) {
if (of_find_property(np, prop2[i].name, NULL))
nconfs++;
}
for (i = 0; i < ARRAY_SIZE(prop4); i++) {
if (of_find_property(np, prop4[i].name, NULL))
nconfs++;
}
if (!nconfs)
return 0;
func->conf = devm_kzalloc(pcs->dev,
sizeof(struct pcs_conf_vals) * nconfs,
GFP_KERNEL);
if (!func->conf)
return -ENOMEM;
func->nconfs = nconfs;
conf = &(func->conf[0]);
m++;
settings = devm_kzalloc(pcs->dev, sizeof(unsigned long) * nconfs,
GFP_KERNEL);
if (!settings)
return -ENOMEM;
s = &settings[0];
for (i = 0; i < ARRAY_SIZE(prop2); i++)
pcs_add_conf2(pcs, np, prop2[i].name, prop2[i].param,
&conf, &s);
for (i = 0; i < ARRAY_SIZE(prop4); i++)
pcs_add_conf4(pcs, np, prop4[i].name, prop4[i].param,
&conf, &s);
m->type = PIN_MAP_TYPE_CONFIGS_GROUP;
m->data.configs.group_or_pin = np->name;
m->data.configs.configs = settings;
m->data.configs.num_configs = nconfs;
return 0;
}
static void pcs_free_pingroups(struct pcs_device *pcs);
/**
* smux_parse_one_pinctrl_entry() - parses a device tree mux entry
* @pcs: pinctrl driver instance
* @np: device node of the mux entry
* @map: map entry
* @num_maps: number of map
* @pgnames: pingroup names
*
* Note that this binding currently supports only sets of one register + value.
*
* Also note that this driver tries to avoid understanding pin and function
* names because of the extra bloat they would cause especially in the case of
* a large number of pins. This driver just sets what is specified for the board
* in the .dts file. Further user space debugging tools can be developed to
* decipher the pin and function names using debugfs.
*
* If you are concerned about the boot time, set up the static pins in
* the bootloader, and only set up selected pins as device tree entries.
*/
static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
struct device_node *np,
struct pinctrl_map **map,
unsigned *num_maps,
const char **pgnames)
{
struct pcs_func_vals *vals;
const __be32 *mux;
int size, rows, *pins, index = 0, found = 0, res = -ENOMEM;
struct pcs_function *function;
mux = of_get_property(np, PCS_MUX_PINS_NAME, &size);
if ((!mux) || (size < sizeof(*mux) * 2)) {
dev_err(pcs->dev, "bad data for mux %s\n",
np->name);
return -EINVAL;
}
size /= sizeof(*mux); /* Number of elements in array */
rows = size / 2;
vals = devm_kzalloc(pcs->dev, sizeof(*vals) * rows, GFP_KERNEL);
if (!vals)
return -ENOMEM;
pins = devm_kzalloc(pcs->dev, sizeof(*pins) * rows, GFP_KERNEL);
if (!pins)
goto free_vals;
while (index < size) {
unsigned offset, val;
int pin;
offset = be32_to_cpup(mux + index++);
val = be32_to_cpup(mux + index++);
vals[found].reg = pcs->base + offset;
vals[found].val = val;
pin = pcs_get_pin_by_offset(pcs, offset);
if (pin < 0) {
dev_err(pcs->dev,
"could not add functions for %s %ux\n",
np->name, offset);
break;
}
pins[found++] = pin;
}
pgnames[0] = np->name;
function = pcs_add_function(pcs, np, np->name, vals, found, pgnames, 1);
if (!function)
goto free_pins;
res = pcs_add_pingroup(pcs, np, np->name, pins, found);
if (res < 0)
goto free_function;
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
(*map)->data.mux.group = np->name;
(*map)->data.mux.function = np->name;
if (PCS_HAS_PINCONF) {
res = pcs_parse_pinconf(pcs, np, function, map);
if (res)
goto free_pingroups;
*num_maps = 2;
} else {
*num_maps = 1;
}
return 0;
free_pingroups:
pcs_free_pingroups(pcs);
*num_maps = 1;
free_function:
pcs_remove_function(pcs, function);
free_pins:
devm_kfree(pcs->dev, pins);
free_vals:
devm_kfree(pcs->dev, vals);
return res;
}
#define PARAMS_FOR_BITS_PER_MUX 3
static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs,
struct device_node *np,
struct pinctrl_map **map,
unsigned *num_maps,
const char **pgnames)
{
struct pcs_func_vals *vals;
const __be32 *mux;
int size, rows, *pins, index = 0, found = 0, res = -ENOMEM;
int npins_in_row;
struct pcs_function *function;
mux = of_get_property(np, PCS_MUX_BITS_NAME, &size);
if (!mux) {
dev_err(pcs->dev, "no valid property for %s\n", np->name);
return -EINVAL;
}
if (size < (sizeof(*mux) * PARAMS_FOR_BITS_PER_MUX)) {
dev_err(pcs->dev, "bad data for %s\n", np->name);
return -EINVAL;
}
/* Number of elements in array */
size /= sizeof(*mux);
rows = size / PARAMS_FOR_BITS_PER_MUX;
npins_in_row = pcs->width / pcs->bits_per_pin;
vals = devm_kzalloc(pcs->dev, sizeof(*vals) * rows * npins_in_row,
GFP_KERNEL);
if (!vals)
return -ENOMEM;
pins = devm_kzalloc(pcs->dev, sizeof(*pins) * rows * npins_in_row,
GFP_KERNEL);
if (!pins)
goto free_vals;
while (index < size) {
unsigned offset, val;
unsigned mask, bit_pos, val_pos, mask_pos, submask;
unsigned pin_num_from_lsb;
int pin;
offset = be32_to_cpup(mux + index++);
val = be32_to_cpup(mux + index++);
mask = be32_to_cpup(mux + index++);
/* Parse pins in each row from LSB */
while (mask) {
bit_pos = ffs(mask);
pin_num_from_lsb = bit_pos / pcs->bits_per_pin;
mask_pos = ((pcs->fmask) << (bit_pos - 1));
val_pos = val & mask_pos;
submask = mask & mask_pos;
if ((mask & mask_pos) == 0) {
dev_err(pcs->dev,
"Invalid mask for %s at 0x%x\n",
np->name, offset);
break;
}
mask &= ~mask_pos;
if (submask != mask_pos) {
dev_warn(pcs->dev,
"Invalid submask 0x%x for %s at 0x%x\n",
submask, np->name, offset);
continue;
}
vals[found].mask = submask;
vals[found].reg = pcs->base + offset;
vals[found].val = val_pos;
pin = pcs_get_pin_by_offset(pcs, offset);
if (pin < 0) {
dev_err(pcs->dev,
"could not add functions for %s %ux\n",
np->name, offset);
break;
}
pins[found++] = pin + pin_num_from_lsb;
}
}
pgnames[0] = np->name;
function = pcs_add_function(pcs, np, np->name, vals, found, pgnames, 1);
if (!function)
goto free_pins;
res = pcs_add_pingroup(pcs, np, np->name, pins, found);
if (res < 0)
goto free_function;
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
(*map)->data.mux.group = np->name;
(*map)->data.mux.function = np->name;
if (PCS_HAS_PINCONF) {
dev_err(pcs->dev, "pinconf not supported\n");
goto free_pingroups;
}
*num_maps = 1;
return 0;
free_pingroups:
pcs_free_pingroups(pcs);
*num_maps = 1;
free_function:
pcs_remove_function(pcs, function);
free_pins:
devm_kfree(pcs->dev, pins);
free_vals:
devm_kfree(pcs->dev, vals);
return res;
}
/**
* pcs_dt_node_to_map() - allocates and parses pinctrl maps
* @pctldev: pinctrl instance
* @np_config: device tree pinmux entry
* @map: array of map entries
* @num_maps: number of maps
*/
static int pcs_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config,
struct pinctrl_map **map, unsigned *num_maps)
{
struct pcs_device *pcs;
const char **pgnames;
int ret;
pcs = pinctrl_dev_get_drvdata(pctldev);
/* create 2 maps. One is for pinmux, and the other is for pinconf. */
*map = devm_kzalloc(pcs->dev, sizeof(**map) * 2, GFP_KERNEL);
if (!*map)
return -ENOMEM;
*num_maps = 0;
pgnames = devm_kzalloc(pcs->dev, sizeof(*pgnames), GFP_KERNEL);
if (!pgnames) {
ret = -ENOMEM;
goto free_map;
}
if (pcs->bits_per_mux) {
ret = pcs_parse_bits_in_pinctrl_entry(pcs, np_config, map,
num_maps, pgnames);
if (ret < 0) {
dev_err(pcs->dev, "no pins entries for %s\n",
np_config->name);
goto free_pgnames;
}
} else {
ret = pcs_parse_one_pinctrl_entry(pcs, np_config, map,
num_maps, pgnames);
if (ret < 0) {
dev_err(pcs->dev, "no pins entries for %s\n",
np_config->name);
goto free_pgnames;
}
}
return 0;
free_pgnames:
devm_kfree(pcs->dev, pgnames);
free_map:
devm_kfree(pcs->dev, *map);
return ret;
}
/**
* pcs_free_funcs() - free memory used by functions
* @pcs: pcs driver instance
*/
static void pcs_free_funcs(struct pcs_device *pcs)
{
struct list_head *pos, *tmp;
int i;
mutex_lock(&pcs->mutex);
for (i = 0; i < pcs->nfuncs; i++) {
struct pcs_function *func;
func = radix_tree_lookup(&pcs->ftree, i);
if (!func)
continue;
radix_tree_delete(&pcs->ftree, i);
}
list_for_each_safe(pos, tmp, &pcs->functions) {
struct pcs_function *function;
function = list_entry(pos, struct pcs_function, node);
list_del(&function->node);
}
mutex_unlock(&pcs->mutex);
}
/**
* pcs_free_pingroups() - free memory used by pingroups
* @pcs: pcs driver instance
*/
static void pcs_free_pingroups(struct pcs_device *pcs)
{
struct list_head *pos, *tmp;
int i;
mutex_lock(&pcs->mutex);
for (i = 0; i < pcs->ngroups; i++) {
struct pcs_pingroup *pingroup;
pingroup = radix_tree_lookup(&pcs->pgtree, i);
if (!pingroup)
continue;
radix_tree_delete(&pcs->pgtree, i);
}
list_for_each_safe(pos, tmp, &pcs->pingroups) {
struct pcs_pingroup *pingroup;
pingroup = list_entry(pos, struct pcs_pingroup, node);
list_del(&pingroup->node);
}
mutex_unlock(&pcs->mutex);
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
/**
* pcs_irq_free() - free interrupt
* @pcs: pcs driver instance
*/
static void pcs_irq_free(struct pcs_device *pcs)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
if (pcs_soc->irq < 0)
return;
if (pcs->domain)
irq_domain_remove(pcs->domain);
if (PCS_QUIRK_HAS_SHARED_IRQ)
free_irq(pcs_soc->irq, pcs_soc);
else
irq_set_chained_handler(pcs_soc->irq, NULL);
}
/**
* pcs_free_resources() - free memory used by this driver
* @pcs: pcs driver instance
*/
static void pcs_free_resources(struct pcs_device *pcs)
{
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
pcs_irq_free(pcs);
if (pcs->pctl)
pinctrl_unregister(pcs->pctl);
pcs_free_funcs(pcs);
pcs_free_pingroups(pcs);
}
#define PCS_GET_PROP_U32(name, reg, err) \
do { \
ret = of_property_read_u32(np, name, reg); \
if (ret) { \
dev_err(pcs->dev, err); \
return ret; \
} \
} while (0);
static struct of_device_id pcs_of_match[];
static int pcs_add_gpio_func(struct device_node *node, struct pcs_device *pcs)
{
const char *propname = "pinctrl-single,gpio-range";
const char *cellname = "#pinctrl-single,gpio-range-cells";
struct of_phandle_args gpiospec;
struct pcs_gpiofunc_range *range;
int ret, i;
for (i = 0; ; i++) {
ret = of_parse_phandle_with_args(node, propname, cellname,
i, &gpiospec);
/* Do not treat it as error. Only treat it as end condition. */
if (ret) {
ret = 0;
break;
}
range = devm_kzalloc(pcs->dev, sizeof(*range), GFP_KERNEL);
if (!range) {
ret = -ENOMEM;
break;
}
range->offset = gpiospec.args[0];
range->npins = gpiospec.args[1];
range->gpiofunc = gpiospec.args[2];
mutex_lock(&pcs->mutex);
list_add_tail(&range->node, &pcs->gpiofuncs);
mutex_unlock(&pcs->mutex);
}
return ret;
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
/**
* @reg: virtual address of interrupt register
* @hwirq: hardware irq number
* @irq: virtual irq number
* @node: list node
*/
struct pcs_interrupt {
void __iomem *reg;
irq_hw_number_t hwirq;
unsigned int irq;
struct list_head node;
};
/**
* pcs_irq_set() - enables or disables an interrupt
*
* Note that this currently assumes one interrupt per pinctrl
* register that is typically used for wake-up events.
*/
static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc,
int irq, const bool enable)
{
struct pcs_device *pcs;
struct list_head *pos;
unsigned mask;
pcs = container_of(pcs_soc, struct pcs_device, socdata);
list_for_each(pos, &pcs->irqs) {
struct pcs_interrupt *pcswi;
unsigned soc_mask;
pcswi = list_entry(pos, struct pcs_interrupt, node);
if (irq != pcswi->irq)
continue;
soc_mask = pcs_soc->irq_enable_mask;
raw_spin_lock(&pcs->lock);
mask = pcs->read(pcswi->reg);
if (enable)
mask |= soc_mask;
else
mask &= ~soc_mask;
pcs->write(mask, pcswi->reg);
raw_spin_unlock(&pcs->lock);
}
if (pcs_soc->rearm)
pcs_soc->rearm();
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
}
/**
* pcs_irq_mask() - mask pinctrl interrupt
* @d: interrupt data
*/
static void pcs_irq_mask(struct irq_data *d)
{
struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
pcs_irq_set(pcs_soc, d->irq, false);
}
/**
* pcs_irq_unmask() - unmask pinctrl interrupt
* @d: interrupt data
*/
static void pcs_irq_unmask(struct irq_data *d)
{
struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
pcs_irq_set(pcs_soc, d->irq, true);
}
/**
* pcs_irq_set_wake() - toggle the suspend and resume wake up
* @d: interrupt data
* @state: wake-up state
*
* Note that this should be called only for suspend and resume.
* For runtime PM, the wake-up events should be enabled by default.
*/
static int pcs_irq_set_wake(struct irq_data *d, unsigned int state)
{
if (state)
pcs_irq_unmask(d);
else
pcs_irq_mask(d);
return 0;
}
/**
* pcs_irq_handle() - common interrupt handler
* @pcs_irq: interrupt data
*
* Note that this currently assumes we have one interrupt bit per
* mux register. This interrupt is typically used for wake-up events.
* For more complex interrupts different handlers can be specified.
*/
static int pcs_irq_handle(struct pcs_soc_data *pcs_soc)
{
struct pcs_device *pcs;
struct list_head *pos;
int count = 0;
pcs = container_of(pcs_soc, struct pcs_device, socdata);
list_for_each(pos, &pcs->irqs) {
struct pcs_interrupt *pcswi;
unsigned mask;
pcswi = list_entry(pos, struct pcs_interrupt, node);
raw_spin_lock(&pcs->lock);
mask = pcs->read(pcswi->reg);
raw_spin_unlock(&pcs->lock);
if (mask & pcs_soc->irq_status_mask) {
generic_handle_irq(irq_find_mapping(pcs->domain,
pcswi->hwirq));
count++;
}
}
return count;
}
/**
* pcs_irq_handler() - handler for the shared interrupt case
* @irq: interrupt
* @d: data
*
* Use this for cases where multiple instances of
* pinctrl-single share a single interrupt like on omaps.
*/
static irqreturn_t pcs_irq_handler(int irq, void *d)
{
struct pcs_soc_data *pcs_soc = d;
return pcs_irq_handle(pcs_soc) ? IRQ_HANDLED : IRQ_NONE;
}
/**
* pcs_irq_handle() - handler for the dedicated chained interrupt case
* @irq: interrupt
* @desc: interrupt descriptor
*
* Use this if you have a separate interrupt for each
* pinctrl-single instance.
*/
static void pcs_irq_chain_handler(unsigned int irq, struct irq_desc *desc)
{
struct pcs_soc_data *pcs_soc = irq_desc_get_handler_data(desc);
struct irq_chip *chip;
int res;
chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
res = pcs_irq_handle(pcs_soc);
/* REVISIT: export and add handle_bad_irq(irq, desc)? */
chained_irq_exit(chip, desc);
return;
}
static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct pcs_soc_data *pcs_soc = d->host_data;
struct pcs_device *pcs;
struct pcs_interrupt *pcswi;
pcs = container_of(pcs_soc, struct pcs_device, socdata);
pcswi = devm_kzalloc(pcs->dev, sizeof(*pcswi), GFP_KERNEL);
if (!pcswi)
return -ENOMEM;
pcswi->reg = pcs->base + hwirq;
pcswi->hwirq = hwirq;
pcswi->irq = irq;
mutex_lock(&pcs->mutex);
list_add_tail(&pcswi->node, &pcs->irqs);
mutex_unlock(&pcs->mutex);
irq_set_chip_data(irq, pcs_soc);
irq_set_chip_and_handler(irq, &pcs->chip,
handle_level_irq);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
irq_set_noprobe(irq);
#endif
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
return 0;
}
static struct irq_domain_ops pcs_irqdomain_ops = {
.map = pcs_irqdomain_map,
.xlate = irq_domain_xlate_onecell,
};
/**
* pcs_irq_init_chained_handler() - set up a chained interrupt handler
* @pcs: pcs driver instance
* @np: device node pointer
*/
static int pcs_irq_init_chained_handler(struct pcs_device *pcs,
struct device_node *np)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
const char *name = "pinctrl";
int num_irqs;
if (!pcs_soc->irq_enable_mask ||
!pcs_soc->irq_status_mask) {
pcs_soc->irq = -1;
return -EINVAL;
}
INIT_LIST_HEAD(&pcs->irqs);
pcs->chip.name = name;
pcs->chip.irq_ack = pcs_irq_mask;
pcs->chip.irq_mask = pcs_irq_mask;
pcs->chip.irq_unmask = pcs_irq_unmask;
pcs->chip.irq_set_wake = pcs_irq_set_wake;
if (PCS_QUIRK_HAS_SHARED_IRQ) {
int res;
res = request_irq(pcs_soc->irq, pcs_irq_handler,
IRQF_SHARED | IRQF_NO_SUSPEND,
name, pcs_soc);
if (res) {
pcs_soc->irq = -1;
return res;
}
} else {
irq_set_handler_data(pcs_soc->irq, pcs_soc);
irq_set_chained_handler(pcs_soc->irq,
pcs_irq_chain_handler);
}
/*
* We can use the register offset as the hardirq
* number as irq_domain_add_simple maps them lazily.
* This way we can easily support more than one
* interrupt per function if needed.
*/
num_irqs = pcs->size;
pcs->domain = irq_domain_add_simple(np, num_irqs, 0,
&pcs_irqdomain_ops,
pcs_soc);
if (!pcs->domain) {
irq_set_chained_handler(pcs_soc->irq, NULL);
return -EINVAL;
}
return 0;
}
#ifdef CONFIG_PM
static int pinctrl_single_suspend(struct platform_device *pdev,
pm_message_t state)
{
struct pcs_device *pcs;
pcs = platform_get_drvdata(pdev);
if (!pcs)
return -EINVAL;
return pinctrl_force_sleep(pcs->pctl);
}
static int pinctrl_single_resume(struct platform_device *pdev)
{
struct pcs_device *pcs;
pcs = platform_get_drvdata(pdev);
if (!pcs)
return -EINVAL;
return pinctrl_force_default(pcs->pctl);
}
#endif
static int pcs_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
struct pcs_pdata *pdata;
struct resource *res;
struct pcs_device *pcs;
const struct pcs_soc_data *soc;
int ret;
match = of_match_device(pcs_of_match, &pdev->dev);
if (!match)
return -EINVAL;
pcs = devm_kzalloc(&pdev->dev, sizeof(*pcs), GFP_KERNEL);
if (!pcs) {
dev_err(&pdev->dev, "could not allocate\n");
return -ENOMEM;
}
pcs->dev = &pdev->dev;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
raw_spin_lock_init(&pcs->lock);
mutex_init(&pcs->mutex);
INIT_LIST_HEAD(&pcs->pingroups);
INIT_LIST_HEAD(&pcs->functions);
INIT_LIST_HEAD(&pcs->gpiofuncs);
soc = match->data;
pcs->flags = soc->flags;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
memcpy(&pcs->socdata, soc, sizeof(*soc));
PCS_GET_PROP_U32("pinctrl-single,register-width", &pcs->width,
"register width not specified\n");
ret = of_property_read_u32(np, "pinctrl-single,function-mask",
&pcs->fmask);
if (!ret) {
pcs->fshift = ffs(pcs->fmask) - 1;
pcs->fmax = pcs->fmask >> pcs->fshift;
} else {
/* If mask property doesn't exist, function mux is invalid. */
pcs->fmask = 0;
pcs->fshift = 0;
pcs->fmax = 0;
}
ret = of_property_read_u32(np, "pinctrl-single,function-off",
&pcs->foff);
if (ret)
pcs->foff = PCS_OFF_DISABLED;
pcs->bits_per_mux = of_property_read_bool(np,
"pinctrl-single,bit-per-mux");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(pcs->dev, "could not get resource\n");
return -ENODEV;
}
pcs->res = devm_request_mem_region(pcs->dev, res->start,
resource_size(res), DRIVER_NAME);
if (!pcs->res) {
dev_err(pcs->dev, "could not get mem_region\n");
return -EBUSY;
}
pcs->size = resource_size(pcs->res);
pcs->base = devm_ioremap(pcs->dev, pcs->res->start, pcs->size);
if (!pcs->base) {
dev_err(pcs->dev, "could not ioremap\n");
return -ENODEV;
}
INIT_RADIX_TREE(&pcs->pgtree, GFP_KERNEL);
INIT_RADIX_TREE(&pcs->ftree, GFP_KERNEL);
platform_set_drvdata(pdev, pcs);
switch (pcs->width) {
case 8:
pcs->read = pcs_readb;
pcs->write = pcs_writeb;
break;
case 16:
pcs->read = pcs_readw;
pcs->write = pcs_writew;
break;
case 32:
pcs->read = pcs_readl;
pcs->write = pcs_writel;
break;
default:
break;
}
pcs->desc.name = DRIVER_NAME;
pcs->desc.pctlops = &pcs_pinctrl_ops;
pcs->desc.pmxops = &pcs_pinmux_ops;
if (PCS_HAS_PINCONF)
pcs->desc.confops = &pcs_pinconf_ops;
pcs->desc.owner = THIS_MODULE;
ret = pcs_allocate_pin_table(pcs);
if (ret < 0)
goto free;
pcs->pctl = pinctrl_register(&pcs->desc, pcs->dev, pcs);
if (!pcs->pctl) {
dev_err(pcs->dev, "could not register single pinctrl driver\n");
ret = -EINVAL;
goto free;
}
ret = pcs_add_gpio_func(np, pcs);
if (ret < 0)
goto free;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
pcs->socdata.irq = irq_of_parse_and_map(np, 0);
if (pcs->socdata.irq)
pcs->flags |= PCS_FEAT_IRQ;
/* We still need auxdata for some omaps for PRM interrupts */
pdata = dev_get_platdata(&pdev->dev);
if (pdata) {
if (pdata->rearm)
pcs->socdata.rearm = pdata->rearm;
if (pdata->irq) {
pcs->socdata.irq = pdata->irq;
pcs->flags |= PCS_FEAT_IRQ;
}
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
if (PCS_HAS_IRQ) {
ret = pcs_irq_init_chained_handler(pcs, np);
if (ret < 0)
dev_warn(pcs->dev, "initialized with no interrupts\n");
}
dev_info(pcs->dev, "%i pins at pa %p size %u\n",
pcs->desc.npins, pcs->base, pcs->size);
return 0;
free:
pcs_free_resources(pcs);
return ret;
}
static int pcs_remove(struct platform_device *pdev)
{
struct pcs_device *pcs = platform_get_drvdata(pdev);
if (!pcs)
return 0;
pcs_free_resources(pcs);
return 0;
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
static const struct pcs_soc_data pinctrl_single_omap_wkup = {
.flags = PCS_QUIRK_SHARED_IRQ,
.irq_enable_mask = (1 << 14), /* OMAP_WAKEUP_EN */
.irq_status_mask = (1 << 15), /* OMAP_WAKEUP_EVENT */
};
static const struct pcs_soc_data pinctrl_single = {
};
static const struct pcs_soc_data pinconf_single = {
.flags = PCS_FEAT_PINCONF,
};
static struct of_device_id pcs_of_match[] = {
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 12:39:40 +08:00
{ .compatible = "ti,omap3-padconf", .data = &pinctrl_single_omap_wkup },
{ .compatible = "ti,omap4-padconf", .data = &pinctrl_single_omap_wkup },
{ .compatible = "ti,omap5-padconf", .data = &pinctrl_single_omap_wkup },
{ .compatible = "pinctrl-single", .data = &pinctrl_single },
{ .compatible = "pinconf-single", .data = &pinconf_single },
{ },
};
MODULE_DEVICE_TABLE(of, pcs_of_match);
static struct platform_driver pcs_driver = {
.probe = pcs_probe,
.remove = pcs_remove,
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.of_match_table = pcs_of_match,
},
#ifdef CONFIG_PM
.suspend = pinctrl_single_suspend,
.resume = pinctrl_single_resume,
#endif
};
module_platform_driver(pcs_driver);
MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
MODULE_DESCRIPTION("One-register-per-pin type device tree based pinctrl driver");
MODULE_LICENSE("GPL v2");