linux_old1/drivers/target/iscsi/iscsi_target.c

4530 lines
123 KiB
C
Raw Normal View History

iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
/*******************************************************************************
* This file contains main functions related to the iSCSI Target Core Driver.
*
* \u00a9 Copyright 2007-2011 RisingTide Systems LLC.
*
* Licensed to the Linux Foundation under the General Public License (GPL) version 2.
*
* Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
******************************************************************************/
#include <linux/string.h>
#include <linux/kthread.h>
#include <linux/crypto.h>
#include <linux/completion.h>
#include <linux/module.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include <asm/unaligned.h>
#include <scsi/scsi_device.h>
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include "iscsi_target_core.h"
#include "iscsi_target_parameters.h"
#include "iscsi_target_seq_pdu_list.h"
#include "iscsi_target_tq.h"
#include "iscsi_target_configfs.h"
#include "iscsi_target_datain_values.h"
#include "iscsi_target_erl0.h"
#include "iscsi_target_erl1.h"
#include "iscsi_target_erl2.h"
#include "iscsi_target_login.h"
#include "iscsi_target_tmr.h"
#include "iscsi_target_tpg.h"
#include "iscsi_target_util.h"
#include "iscsi_target.h"
#include "iscsi_target_device.h"
#include "iscsi_target_stat.h"
static LIST_HEAD(g_tiqn_list);
static LIST_HEAD(g_np_list);
static DEFINE_SPINLOCK(tiqn_lock);
static DEFINE_SPINLOCK(np_lock);
static struct idr tiqn_idr;
struct idr sess_idr;
struct mutex auth_id_lock;
spinlock_t sess_idr_lock;
struct iscsit_global *iscsit_global;
struct kmem_cache *lio_cmd_cache;
struct kmem_cache *lio_qr_cache;
struct kmem_cache *lio_dr_cache;
struct kmem_cache *lio_ooo_cache;
struct kmem_cache *lio_r2t_cache;
static int iscsit_handle_immediate_data(struct iscsi_cmd *,
unsigned char *buf, u32);
static int iscsit_logout_post_handler(struct iscsi_cmd *, struct iscsi_conn *);
struct iscsi_tiqn *iscsit_get_tiqn_for_login(unsigned char *buf)
{
struct iscsi_tiqn *tiqn = NULL;
spin_lock(&tiqn_lock);
list_for_each_entry(tiqn, &g_tiqn_list, tiqn_list) {
if (!strcmp(tiqn->tiqn, buf)) {
spin_lock(&tiqn->tiqn_state_lock);
if (tiqn->tiqn_state == TIQN_STATE_ACTIVE) {
tiqn->tiqn_access_count++;
spin_unlock(&tiqn->tiqn_state_lock);
spin_unlock(&tiqn_lock);
return tiqn;
}
spin_unlock(&tiqn->tiqn_state_lock);
}
}
spin_unlock(&tiqn_lock);
return NULL;
}
static int iscsit_set_tiqn_shutdown(struct iscsi_tiqn *tiqn)
{
spin_lock(&tiqn->tiqn_state_lock);
if (tiqn->tiqn_state == TIQN_STATE_ACTIVE) {
tiqn->tiqn_state = TIQN_STATE_SHUTDOWN;
spin_unlock(&tiqn->tiqn_state_lock);
return 0;
}
spin_unlock(&tiqn->tiqn_state_lock);
return -1;
}
void iscsit_put_tiqn_for_login(struct iscsi_tiqn *tiqn)
{
spin_lock(&tiqn->tiqn_state_lock);
tiqn->tiqn_access_count--;
spin_unlock(&tiqn->tiqn_state_lock);
}
/*
* Note that IQN formatting is expected to be done in userspace, and
* no explict IQN format checks are done here.
*/
struct iscsi_tiqn *iscsit_add_tiqn(unsigned char *buf)
{
struct iscsi_tiqn *tiqn = NULL;
int ret;
if (strlen(buf) >= ISCSI_IQN_LEN) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
pr_err("Target IQN exceeds %d bytes\n",
ISCSI_IQN_LEN);
return ERR_PTR(-EINVAL);
}
tiqn = kzalloc(sizeof(struct iscsi_tiqn), GFP_KERNEL);
if (!tiqn) {
pr_err("Unable to allocate struct iscsi_tiqn\n");
return ERR_PTR(-ENOMEM);
}
sprintf(tiqn->tiqn, "%s", buf);
INIT_LIST_HEAD(&tiqn->tiqn_list);
INIT_LIST_HEAD(&tiqn->tiqn_tpg_list);
spin_lock_init(&tiqn->tiqn_state_lock);
spin_lock_init(&tiqn->tiqn_tpg_lock);
spin_lock_init(&tiqn->sess_err_stats.lock);
spin_lock_init(&tiqn->login_stats.lock);
spin_lock_init(&tiqn->logout_stats.lock);
if (!idr_pre_get(&tiqn_idr, GFP_KERNEL)) {
pr_err("idr_pre_get() for tiqn_idr failed\n");
kfree(tiqn);
return ERR_PTR(-ENOMEM);
}
tiqn->tiqn_state = TIQN_STATE_ACTIVE;
spin_lock(&tiqn_lock);
ret = idr_get_new(&tiqn_idr, NULL, &tiqn->tiqn_index);
if (ret < 0) {
pr_err("idr_get_new() failed for tiqn->tiqn_index\n");
spin_unlock(&tiqn_lock);
kfree(tiqn);
return ERR_PTR(ret);
}
list_add_tail(&tiqn->tiqn_list, &g_tiqn_list);
spin_unlock(&tiqn_lock);
pr_debug("CORE[0] - Added iSCSI Target IQN: %s\n", tiqn->tiqn);
return tiqn;
}
static void iscsit_wait_for_tiqn(struct iscsi_tiqn *tiqn)
{
/*
* Wait for accesses to said struct iscsi_tiqn to end.
*/
spin_lock(&tiqn->tiqn_state_lock);
while (tiqn->tiqn_access_count != 0) {
spin_unlock(&tiqn->tiqn_state_lock);
msleep(10);
spin_lock(&tiqn->tiqn_state_lock);
}
spin_unlock(&tiqn->tiqn_state_lock);
}
void iscsit_del_tiqn(struct iscsi_tiqn *tiqn)
{
/*
* iscsit_set_tiqn_shutdown sets tiqn->tiqn_state = TIQN_STATE_SHUTDOWN
* while holding tiqn->tiqn_state_lock. This means that all subsequent
* attempts to access this struct iscsi_tiqn will fail from both transport
* fabric and control code paths.
*/
if (iscsit_set_tiqn_shutdown(tiqn) < 0) {
pr_err("iscsit_set_tiqn_shutdown() failed\n");
return;
}
iscsit_wait_for_tiqn(tiqn);
spin_lock(&tiqn_lock);
list_del(&tiqn->tiqn_list);
idr_remove(&tiqn_idr, tiqn->tiqn_index);
spin_unlock(&tiqn_lock);
pr_debug("CORE[0] - Deleted iSCSI Target IQN: %s\n",
tiqn->tiqn);
kfree(tiqn);
}
int iscsit_access_np(struct iscsi_np *np, struct iscsi_portal_group *tpg)
{
int ret;
/*
* Determine if the network portal is accepting storage traffic.
*/
spin_lock_bh(&np->np_thread_lock);
if (np->np_thread_state != ISCSI_NP_THREAD_ACTIVE) {
spin_unlock_bh(&np->np_thread_lock);
return -1;
}
if (np->np_login_tpg) {
pr_err("np->np_login_tpg() is not NULL!\n");
spin_unlock_bh(&np->np_thread_lock);
return -1;
}
spin_unlock_bh(&np->np_thread_lock);
/*
* Determine if the portal group is accepting storage traffic.
*/
spin_lock_bh(&tpg->tpg_state_lock);
if (tpg->tpg_state != TPG_STATE_ACTIVE) {
spin_unlock_bh(&tpg->tpg_state_lock);
return -1;
}
spin_unlock_bh(&tpg->tpg_state_lock);
/*
* Here we serialize access across the TIQN+TPG Tuple.
*/
ret = mutex_lock_interruptible(&tpg->np_login_lock);
if ((ret != 0) || signal_pending(current))
return -1;
spin_lock_bh(&np->np_thread_lock);
np->np_login_tpg = tpg;
spin_unlock_bh(&np->np_thread_lock);
return 0;
}
int iscsit_deaccess_np(struct iscsi_np *np, struct iscsi_portal_group *tpg)
{
struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
spin_lock_bh(&np->np_thread_lock);
np->np_login_tpg = NULL;
spin_unlock_bh(&np->np_thread_lock);
mutex_unlock(&tpg->np_login_lock);
if (tiqn)
iscsit_put_tiqn_for_login(tiqn);
return 0;
}
static struct iscsi_np *iscsit_get_np(
struct __kernel_sockaddr_storage *sockaddr,
int network_transport)
{
struct sockaddr_in *sock_in, *sock_in_e;
struct sockaddr_in6 *sock_in6, *sock_in6_e;
struct iscsi_np *np;
int ip_match = 0;
u16 port;
spin_lock_bh(&np_lock);
list_for_each_entry(np, &g_np_list, np_list) {
spin_lock(&np->np_thread_lock);
if (np->np_thread_state != ISCSI_NP_THREAD_ACTIVE) {
spin_unlock(&np->np_thread_lock);
continue;
}
if (sockaddr->ss_family == AF_INET6) {
sock_in6 = (struct sockaddr_in6 *)sockaddr;
sock_in6_e = (struct sockaddr_in6 *)&np->np_sockaddr;
if (!memcmp((void *)&sock_in6->sin6_addr.in6_u,
(void *)&sock_in6_e->sin6_addr.in6_u,
sizeof(struct in6_addr)))
ip_match = 1;
port = ntohs(sock_in6->sin6_port);
} else {
sock_in = (struct sockaddr_in *)sockaddr;
sock_in_e = (struct sockaddr_in *)&np->np_sockaddr;
if (sock_in->sin_addr.s_addr ==
sock_in_e->sin_addr.s_addr)
ip_match = 1;
port = ntohs(sock_in->sin_port);
}
if ((ip_match == 1) && (np->np_port == port) &&
(np->np_network_transport == network_transport)) {
/*
* Increment the np_exports reference count now to
* prevent iscsit_del_np() below from being called
* while iscsi_tpg_add_network_portal() is called.
*/
np->np_exports++;
spin_unlock(&np->np_thread_lock);
spin_unlock_bh(&np_lock);
return np;
}
spin_unlock(&np->np_thread_lock);
}
spin_unlock_bh(&np_lock);
return NULL;
}
struct iscsi_np *iscsit_add_np(
struct __kernel_sockaddr_storage *sockaddr,
char *ip_str,
int network_transport)
{
struct sockaddr_in *sock_in;
struct sockaddr_in6 *sock_in6;
struct iscsi_np *np;
int ret;
/*
* Locate the existing struct iscsi_np if already active..
*/
np = iscsit_get_np(sockaddr, network_transport);
if (np)
return np;
np = kzalloc(sizeof(struct iscsi_np), GFP_KERNEL);
if (!np) {
pr_err("Unable to allocate memory for struct iscsi_np\n");
return ERR_PTR(-ENOMEM);
}
np->np_flags |= NPF_IP_NETWORK;
if (sockaddr->ss_family == AF_INET6) {
sock_in6 = (struct sockaddr_in6 *)sockaddr;
snprintf(np->np_ip, IPV6_ADDRESS_SPACE, "%s", ip_str);
np->np_port = ntohs(sock_in6->sin6_port);
} else {
sock_in = (struct sockaddr_in *)sockaddr;
sprintf(np->np_ip, "%s", ip_str);
np->np_port = ntohs(sock_in->sin_port);
}
np->np_network_transport = network_transport;
spin_lock_init(&np->np_thread_lock);
init_completion(&np->np_restart_comp);
INIT_LIST_HEAD(&np->np_list);
ret = iscsi_target_setup_login_socket(np, sockaddr);
if (ret != 0) {
kfree(np);
return ERR_PTR(ret);
}
np->np_thread = kthread_run(iscsi_target_login_thread, np, "iscsi_np");
if (IS_ERR(np->np_thread)) {
pr_err("Unable to create kthread: iscsi_np\n");
ret = PTR_ERR(np->np_thread);
kfree(np);
return ERR_PTR(ret);
}
/*
* Increment the np_exports reference count now to prevent
* iscsit_del_np() below from being run while a new call to
* iscsi_tpg_add_network_portal() for a matching iscsi_np is
* active. We don't need to hold np->np_thread_lock at this
* point because iscsi_np has not been added to g_np_list yet.
*/
np->np_exports = 1;
spin_lock_bh(&np_lock);
list_add_tail(&np->np_list, &g_np_list);
spin_unlock_bh(&np_lock);
pr_debug("CORE[0] - Added Network Portal: %s:%hu on %s\n",
np->np_ip, np->np_port, (np->np_network_transport == ISCSI_TCP) ?
"TCP" : "SCTP");
return np;
}
int iscsit_reset_np_thread(
struct iscsi_np *np,
struct iscsi_tpg_np *tpg_np,
struct iscsi_portal_group *tpg)
{
spin_lock_bh(&np->np_thread_lock);
if (tpg && tpg_np) {
/*
* The reset operation need only be performed when the
* passed struct iscsi_portal_group has a login in progress
* to one of the network portals.
*/
if (tpg_np->tpg_np->np_login_tpg != tpg) {
spin_unlock_bh(&np->np_thread_lock);
return 0;
}
}
if (np->np_thread_state == ISCSI_NP_THREAD_INACTIVE) {
spin_unlock_bh(&np->np_thread_lock);
return 0;
}
np->np_thread_state = ISCSI_NP_THREAD_RESET;
if (np->np_thread) {
spin_unlock_bh(&np->np_thread_lock);
send_sig(SIGINT, np->np_thread, 1);
wait_for_completion(&np->np_restart_comp);
spin_lock_bh(&np->np_thread_lock);
}
spin_unlock_bh(&np->np_thread_lock);
return 0;
}
int iscsit_del_np_comm(struct iscsi_np *np)
{
if (!np->np_socket)
return 0;
/*
* Some network transports allocate their own struct sock->file,
* see if we need to free any additional allocated resources.
*/
if (np->np_flags & NPF_SCTP_STRUCT_FILE) {
kfree(np->np_socket->file);
np->np_socket->file = NULL;
}
sock_release(np->np_socket);
return 0;
}
int iscsit_del_np(struct iscsi_np *np)
{
spin_lock_bh(&np->np_thread_lock);
np->np_exports--;
if (np->np_exports) {
spin_unlock_bh(&np->np_thread_lock);
return 0;
}
np->np_thread_state = ISCSI_NP_THREAD_SHUTDOWN;
spin_unlock_bh(&np->np_thread_lock);
if (np->np_thread) {
/*
* We need to send the signal to wakeup Linux/Net
* which may be sleeping in sock_accept()..
*/
send_sig(SIGINT, np->np_thread, 1);
kthread_stop(np->np_thread);
}
iscsit_del_np_comm(np);
spin_lock_bh(&np_lock);
list_del(&np->np_list);
spin_unlock_bh(&np_lock);
pr_debug("CORE[0] - Removed Network Portal: %s:%hu on %s\n",
np->np_ip, np->np_port, (np->np_network_transport == ISCSI_TCP) ?
"TCP" : "SCTP");
kfree(np);
return 0;
}
static int __init iscsi_target_init_module(void)
{
int ret = 0;
pr_debug("iSCSI-Target "ISCSIT_VERSION"\n");
iscsit_global = kzalloc(sizeof(struct iscsit_global), GFP_KERNEL);
if (!iscsit_global) {
pr_err("Unable to allocate memory for iscsit_global\n");
return -1;
}
mutex_init(&auth_id_lock);
spin_lock_init(&sess_idr_lock);
idr_init(&tiqn_idr);
idr_init(&sess_idr);
ret = iscsi_target_register_configfs();
if (ret < 0)
goto out;
ret = iscsi_thread_set_init();
if (ret < 0)
goto configfs_out;
if (iscsi_allocate_thread_sets(TARGET_THREAD_SET_COUNT) !=
TARGET_THREAD_SET_COUNT) {
pr_err("iscsi_allocate_thread_sets() returned"
" unexpected value!\n");
goto ts_out1;
}
lio_cmd_cache = kmem_cache_create("lio_cmd_cache",
sizeof(struct iscsi_cmd), __alignof__(struct iscsi_cmd),
0, NULL);
if (!lio_cmd_cache) {
pr_err("Unable to kmem_cache_create() for"
" lio_cmd_cache\n");
goto ts_out2;
}
lio_qr_cache = kmem_cache_create("lio_qr_cache",
sizeof(struct iscsi_queue_req),
__alignof__(struct iscsi_queue_req), 0, NULL);
if (!lio_qr_cache) {
pr_err("nable to kmem_cache_create() for"
" lio_qr_cache\n");
goto cmd_out;
}
lio_dr_cache = kmem_cache_create("lio_dr_cache",
sizeof(struct iscsi_datain_req),
__alignof__(struct iscsi_datain_req), 0, NULL);
if (!lio_dr_cache) {
pr_err("Unable to kmem_cache_create() for"
" lio_dr_cache\n");
goto qr_out;
}
lio_ooo_cache = kmem_cache_create("lio_ooo_cache",
sizeof(struct iscsi_ooo_cmdsn),
__alignof__(struct iscsi_ooo_cmdsn), 0, NULL);
if (!lio_ooo_cache) {
pr_err("Unable to kmem_cache_create() for"
" lio_ooo_cache\n");
goto dr_out;
}
lio_r2t_cache = kmem_cache_create("lio_r2t_cache",
sizeof(struct iscsi_r2t), __alignof__(struct iscsi_r2t),
0, NULL);
if (!lio_r2t_cache) {
pr_err("Unable to kmem_cache_create() for"
" lio_r2t_cache\n");
goto ooo_out;
}
if (iscsit_load_discovery_tpg() < 0)
goto r2t_out;
return ret;
r2t_out:
kmem_cache_destroy(lio_r2t_cache);
ooo_out:
kmem_cache_destroy(lio_ooo_cache);
dr_out:
kmem_cache_destroy(lio_dr_cache);
qr_out:
kmem_cache_destroy(lio_qr_cache);
cmd_out:
kmem_cache_destroy(lio_cmd_cache);
ts_out2:
iscsi_deallocate_thread_sets();
ts_out1:
iscsi_thread_set_free();
configfs_out:
iscsi_target_deregister_configfs();
out:
kfree(iscsit_global);
return -ENOMEM;
}
static void __exit iscsi_target_cleanup_module(void)
{
iscsi_deallocate_thread_sets();
iscsi_thread_set_free();
iscsit_release_discovery_tpg();
kmem_cache_destroy(lio_cmd_cache);
kmem_cache_destroy(lio_qr_cache);
kmem_cache_destroy(lio_dr_cache);
kmem_cache_destroy(lio_ooo_cache);
kmem_cache_destroy(lio_r2t_cache);
iscsi_target_deregister_configfs();
kfree(iscsit_global);
}
int iscsit_add_reject(
u8 reason,
int fail_conn,
unsigned char *buf,
struct iscsi_conn *conn)
{
struct iscsi_cmd *cmd;
struct iscsi_reject *hdr;
int ret;
cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
if (!cmd)
return -1;
cmd->iscsi_opcode = ISCSI_OP_REJECT;
if (fail_conn)
cmd->cmd_flags |= ICF_REJECT_FAIL_CONN;
hdr = (struct iscsi_reject *) cmd->pdu;
hdr->reason = reason;
cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (!cmd->buf_ptr) {
pr_err("Unable to allocate memory for cmd->buf_ptr\n");
iscsit_release_cmd(cmd);
return -1;
}
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
cmd->i_state = ISTATE_SEND_REJECT;
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
ret = wait_for_completion_interruptible(&cmd->reject_comp);
if (ret != 0)
return -1;
return (!fail_conn) ? 0 : -1;
}
int iscsit_add_reject_from_cmd(
u8 reason,
int fail_conn,
int add_to_conn,
unsigned char *buf,
struct iscsi_cmd *cmd)
{
struct iscsi_conn *conn;
struct iscsi_reject *hdr;
int ret;
if (!cmd->conn) {
pr_err("cmd->conn is NULL for ITT: 0x%08x\n",
cmd->init_task_tag);
return -1;
}
conn = cmd->conn;
cmd->iscsi_opcode = ISCSI_OP_REJECT;
if (fail_conn)
cmd->cmd_flags |= ICF_REJECT_FAIL_CONN;
hdr = (struct iscsi_reject *) cmd->pdu;
hdr->reason = reason;
cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (!cmd->buf_ptr) {
pr_err("Unable to allocate memory for cmd->buf_ptr\n");
iscsit_release_cmd(cmd);
return -1;
}
if (add_to_conn) {
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
}
cmd->i_state = ISTATE_SEND_REJECT;
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
ret = wait_for_completion_interruptible(&cmd->reject_comp);
if (ret != 0)
return -1;
return (!fail_conn) ? 0 : -1;
}
/*
* Map some portion of the allocated scatterlist to an iovec, suitable for
* kernel sockets to copy data in/out. This handles both pages and slab-allocated
* buffers, since we have been tricky and mapped t_mem_sg to the buffer in
* either case (see iscsit_alloc_buffs)
*/
static int iscsit_map_iovec(
struct iscsi_cmd *cmd,
struct kvec *iov,
u32 data_offset,
u32 data_length)
{
u32 i = 0;
struct scatterlist *sg;
unsigned int page_off;
/*
* We have a private mapping of the allocated pages in t_mem_sg.
* At this point, we also know each contains a page.
*/
sg = &cmd->t_mem_sg[data_offset / PAGE_SIZE];
page_off = (data_offset % PAGE_SIZE);
cmd->first_data_sg = sg;
cmd->first_data_sg_off = page_off;
while (data_length) {
u32 cur_len = min_t(u32, data_length, sg->length - page_off);
iov[i].iov_base = kmap(sg_page(sg)) + sg->offset + page_off;
iov[i].iov_len = cur_len;
data_length -= cur_len;
page_off = 0;
sg = sg_next(sg);
i++;
}
cmd->kmapped_nents = i;
return i;
}
static void iscsit_unmap_iovec(struct iscsi_cmd *cmd)
{
u32 i;
struct scatterlist *sg;
sg = cmd->first_data_sg;
for (i = 0; i < cmd->kmapped_nents; i++)
kunmap(sg_page(&sg[i]));
}
static void iscsit_ack_from_expstatsn(struct iscsi_conn *conn, u32 exp_statsn)
{
struct iscsi_cmd *cmd;
conn->exp_statsn = exp_statsn;
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry(cmd, &conn->conn_cmd_list, i_list) {
spin_lock(&cmd->istate_lock);
if ((cmd->i_state == ISTATE_SENT_STATUS) &&
(cmd->stat_sn < exp_statsn)) {
cmd->i_state = ISTATE_REMOVE;
spin_unlock(&cmd->istate_lock);
iscsit_add_cmd_to_immediate_queue(cmd, conn,
cmd->i_state);
continue;
}
spin_unlock(&cmd->istate_lock);
}
spin_unlock_bh(&conn->cmd_lock);
}
static int iscsit_allocate_iovecs(struct iscsi_cmd *cmd)
{
u32 iov_count = (cmd->se_cmd.t_data_nents == 0) ? 1 :
cmd->se_cmd.t_data_nents;
iov_count += ISCSI_IOV_DATA_BUFFER;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
cmd->iov_data = kzalloc(iov_count * sizeof(struct kvec), GFP_KERNEL);
if (!cmd->iov_data) {
pr_err("Unable to allocate cmd->iov_data\n");
return -ENOMEM;
}
cmd->orig_iov_data_count = iov_count;
return 0;
}
static int iscsit_alloc_buffs(struct iscsi_cmd *cmd)
{
struct scatterlist *sgl;
u32 length = cmd->se_cmd.data_length;
int nents = DIV_ROUND_UP(length, PAGE_SIZE);
int i = 0, ret;
/*
* If no SCSI payload is present, allocate the default iovecs used for
* iSCSI PDU Header
*/
if (!length)
return iscsit_allocate_iovecs(cmd);
sgl = kzalloc(sizeof(*sgl) * nents, GFP_KERNEL);
if (!sgl)
return -ENOMEM;
sg_init_table(sgl, nents);
while (length) {
int buf_size = min_t(int, length, PAGE_SIZE);
struct page *page;
page = alloc_page(GFP_KERNEL | __GFP_ZERO);
if (!page)
goto page_alloc_failed;
sg_set_page(&sgl[i], page, buf_size, 0);
length -= buf_size;
i++;
}
cmd->t_mem_sg = sgl;
cmd->t_mem_sg_nents = nents;
/* BIDI ops not supported */
/* Tell the core about our preallocated memory */
transport_generic_map_mem_to_cmd(&cmd->se_cmd, sgl, nents, NULL, 0);
/*
* Allocate iovecs for SCSI payload after transport_generic_map_mem_to_cmd
* so that cmd->se_cmd.t_tasks_se_num has been set.
*/
ret = iscsit_allocate_iovecs(cmd);
if (ret < 0)
goto page_alloc_failed;
return 0;
page_alloc_failed:
while (i >= 0) {
__free_page(sg_page(&sgl[i]));
i--;
}
kfree(cmd->t_mem_sg);
cmd->t_mem_sg = NULL;
return -ENOMEM;
}
static int iscsit_handle_scsi_cmd(
struct iscsi_conn *conn,
unsigned char *buf)
{
int data_direction, cmdsn_ret = 0, immed_ret, ret, transport_ret;
int dump_immediate_data = 0, send_check_condition = 0, payload_length;
struct iscsi_cmd *cmd = NULL;
struct iscsi_scsi_req *hdr;
spin_lock_bh(&conn->sess->session_stats_lock);
conn->sess->cmd_pdus++;
if (conn->sess->se_sess->se_node_acl) {
spin_lock(&conn->sess->se_sess->se_node_acl->stats_lock);
conn->sess->se_sess->se_node_acl->num_cmds++;
spin_unlock(&conn->sess->se_sess->se_node_acl->stats_lock);
}
spin_unlock_bh(&conn->sess->session_stats_lock);
hdr = (struct iscsi_scsi_req *) buf;
payload_length = ntoh24(hdr->dlength);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->data_length = be32_to_cpu(hdr->data_length);
hdr->cmdsn = be32_to_cpu(hdr->cmdsn);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
/* FIXME; Add checks for AdditionalHeaderSegment */
if (!(hdr->flags & ISCSI_FLAG_CMD_WRITE) &&
!(hdr->flags & ISCSI_FLAG_CMD_FINAL)) {
pr_err("ISCSI_FLAG_CMD_WRITE & ISCSI_FLAG_CMD_FINAL"
" not set. Bad iSCSI Initiator.\n");
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_INVALID, 1,
buf, conn);
}
if (((hdr->flags & ISCSI_FLAG_CMD_READ) ||
(hdr->flags & ISCSI_FLAG_CMD_WRITE)) && !hdr->data_length) {
/*
* Vmware ESX v3.0 uses a modified Cisco Initiator (v3.4.2)
* that adds support for RESERVE/RELEASE. There is a bug
* add with this new functionality that sets R/W bits when
* neither CDB carries any READ or WRITE datapayloads.
*/
if ((hdr->cdb[0] == 0x16) || (hdr->cdb[0] == 0x17)) {
hdr->flags &= ~ISCSI_FLAG_CMD_READ;
hdr->flags &= ~ISCSI_FLAG_CMD_WRITE;
goto done;
}
pr_err("ISCSI_FLAG_CMD_READ or ISCSI_FLAG_CMD_WRITE"
" set when Expected Data Transfer Length is 0 for"
" CDB: 0x%02x. Bad iSCSI Initiator.\n", hdr->cdb[0]);
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_INVALID, 1,
buf, conn);
}
done:
if (!(hdr->flags & ISCSI_FLAG_CMD_READ) &&
!(hdr->flags & ISCSI_FLAG_CMD_WRITE) && (hdr->data_length != 0)) {
pr_err("ISCSI_FLAG_CMD_READ and/or ISCSI_FLAG_CMD_WRITE"
" MUST be set if Expected Data Transfer Length is not 0."
" Bad iSCSI Initiator\n");
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_INVALID, 1,
buf, conn);
}
if ((hdr->flags & ISCSI_FLAG_CMD_READ) &&
(hdr->flags & ISCSI_FLAG_CMD_WRITE)) {
pr_err("Bidirectional operations not supported!\n");
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_INVALID, 1,
buf, conn);
}
if (hdr->opcode & ISCSI_OP_IMMEDIATE) {
pr_err("Illegally set Immediate Bit in iSCSI Initiator"
" Scsi Command PDU.\n");
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_INVALID, 1,
buf, conn);
}
if (payload_length && !conn->sess->sess_ops->ImmediateData) {
pr_err("ImmediateData=No but DataSegmentLength=%u,"
" protocol error.\n", payload_length);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
if ((hdr->data_length == payload_length) &&
(!(hdr->flags & ISCSI_FLAG_CMD_FINAL))) {
pr_err("Expected Data Transfer Length and Length of"
" Immediate Data are the same, but ISCSI_FLAG_CMD_FINAL"
" bit is not set protocol error\n");
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
if (payload_length > hdr->data_length) {
pr_err("DataSegmentLength: %u is greater than"
" EDTL: %u, protocol error.\n", payload_length,
hdr->data_length);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
if (payload_length > conn->conn_ops->MaxRecvDataSegmentLength) {
pr_err("DataSegmentLength: %u is greater than"
" MaxRecvDataSegmentLength: %u, protocol error.\n",
payload_length, conn->conn_ops->MaxRecvDataSegmentLength);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
if (payload_length > conn->sess->sess_ops->FirstBurstLength) {
pr_err("DataSegmentLength: %u is greater than"
" FirstBurstLength: %u, protocol error.\n",
payload_length, conn->sess->sess_ops->FirstBurstLength);
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_INVALID, 1,
buf, conn);
}
data_direction = (hdr->flags & ISCSI_FLAG_CMD_WRITE) ? DMA_TO_DEVICE :
(hdr->flags & ISCSI_FLAG_CMD_READ) ? DMA_FROM_DEVICE :
DMA_NONE;
cmd = iscsit_allocate_se_cmd(conn, hdr->data_length, data_direction,
(hdr->flags & ISCSI_FLAG_CMD_ATTR_MASK));
if (!cmd)
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES, 1,
buf, conn);
pr_debug("Got SCSI Command, ITT: 0x%08x, CmdSN: 0x%08x,"
" ExpXferLen: %u, Length: %u, CID: %hu\n", hdr->itt,
hdr->cmdsn, hdr->data_length, payload_length, conn->cid);
cmd->iscsi_opcode = ISCSI_OP_SCSI_CMD;
cmd->i_state = ISTATE_NEW_CMD;
cmd->immediate_cmd = ((hdr->opcode & ISCSI_OP_IMMEDIATE) ? 1 : 0);
cmd->immediate_data = (payload_length) ? 1 : 0;
cmd->unsolicited_data = ((!(hdr->flags & ISCSI_FLAG_CMD_FINAL) &&
(hdr->flags & ISCSI_FLAG_CMD_WRITE)) ? 1 : 0);
if (cmd->unsolicited_data)
cmd->cmd_flags |= ICF_NON_IMMEDIATE_UNSOLICITED_DATA;
conn->sess->init_task_tag = cmd->init_task_tag = hdr->itt;
if (hdr->flags & ISCSI_FLAG_CMD_READ) {
spin_lock_bh(&conn->sess->ttt_lock);
cmd->targ_xfer_tag = conn->sess->targ_xfer_tag++;
if (cmd->targ_xfer_tag == 0xFFFFFFFF)
cmd->targ_xfer_tag = conn->sess->targ_xfer_tag++;
spin_unlock_bh(&conn->sess->ttt_lock);
} else if (hdr->flags & ISCSI_FLAG_CMD_WRITE)
cmd->targ_xfer_tag = 0xFFFFFFFF;
cmd->cmd_sn = hdr->cmdsn;
cmd->exp_stat_sn = hdr->exp_statsn;
cmd->first_burst_len = payload_length;
if (cmd->data_direction == DMA_FROM_DEVICE) {
struct iscsi_datain_req *dr;
dr = iscsit_allocate_datain_req();
if (!dr)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, 1, buf, cmd);
iscsit_attach_datain_req(cmd, dr);
}
/*
* The CDB is going to an se_device_t.
*/
ret = iscsit_get_lun_for_cmd(cmd, hdr->cdb,
get_unaligned_le64(&hdr->lun));
if (ret < 0) {
if (cmd->se_cmd.scsi_sense_reason == TCM_NON_EXISTENT_LUN) {
pr_debug("Responding to non-acl'ed,"
" non-existent or non-exported iSCSI LUN:"
" 0x%016Lx\n", get_unaligned_le64(&hdr->lun));
}
send_check_condition = 1;
goto attach_cmd;
}
/*
* The Initiator Node has access to the LUN (the addressing method
* is handled inside of iscsit_get_lun_for_cmd()). Now it's time to
* allocate 1->N transport tasks (depending on sector count and
* maximum request size the physical HBA(s) can handle.
*/
transport_ret = transport_generic_allocate_tasks(&cmd->se_cmd, hdr->cdb);
if (transport_ret == -ENOMEM) {
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, 1, buf, cmd);
} else if (transport_ret == -EINVAL) {
/*
* Unsupported SAM Opcode. CHECK_CONDITION will be sent
* in iscsit_execute_cmd() during the CmdSN OOO Execution
* Mechinism.
*/
send_check_condition = 1;
} else {
cmd->data_length = cmd->se_cmd.data_length;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (iscsit_decide_list_to_build(cmd, payload_length) < 0)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, 1, buf, cmd);
}
attach_cmd:
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
/*
* Check if we need to delay processing because of ALUA
* Active/NonOptimized primary access state..
*/
core_alua_check_nonop_delay(&cmd->se_cmd);
/*
* Allocate and setup SGL used with transport_generic_map_mem_to_cmd().
* also call iscsit_allocate_iovecs()
*/
ret = iscsit_alloc_buffs(cmd);
if (ret < 0)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, 1, buf, cmd);
/*
* Check the CmdSN against ExpCmdSN/MaxCmdSN here if
* the Immediate Bit is not set, and no Immediate
* Data is attached.
*
* A PDU/CmdSN carrying Immediate Data can only
* be processed after the DataCRC has passed.
* If the DataCRC fails, the CmdSN MUST NOT
* be acknowledged. (See below)
*/
if (!cmd->immediate_data) {
cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
return 0;
else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
}
iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
/*
* If no Immediate Data is attached, it's OK to return now.
*/
if (!cmd->immediate_data) {
if (send_check_condition)
return 0;
if (cmd->unsolicited_data) {
iscsit_set_dataout_sequence_values(cmd);
spin_lock_bh(&cmd->dataout_timeout_lock);
iscsit_start_dataout_timer(cmd, cmd->conn);
spin_unlock_bh(&cmd->dataout_timeout_lock);
}
return 0;
}
/*
* Early CHECK_CONDITIONs never make it to the transport processing
* thread. They are processed in CmdSN order by
* iscsit_check_received_cmdsn() below.
*/
if (send_check_condition) {
immed_ret = IMMEDIATE_DATA_NORMAL_OPERATION;
dump_immediate_data = 1;
goto after_immediate_data;
}
/*
* Call directly into transport_generic_new_cmd() to perform
* the backend memory allocation.
*/
ret = transport_generic_new_cmd(&cmd->se_cmd);
target: Address legacy PYX_TRANSPORT_* return code breakage This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04 17:36:16 +08:00
if (ret < 0) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
immed_ret = IMMEDIATE_DATA_NORMAL_OPERATION;
dump_immediate_data = 1;
goto after_immediate_data;
}
immed_ret = iscsit_handle_immediate_data(cmd, buf, payload_length);
after_immediate_data:
if (immed_ret == IMMEDIATE_DATA_NORMAL_OPERATION) {
/*
* A PDU/CmdSN carrying Immediate Data passed
* DataCRC, check against ExpCmdSN/MaxCmdSN if
* Immediate Bit is not set.
*/
cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
/*
* Special case for Unsupported SAM WRITE Opcodes
* and ImmediateData=Yes.
*/
if (dump_immediate_data) {
if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
return -1;
} else if (cmd->unsolicited_data) {
iscsit_set_dataout_sequence_values(cmd);
spin_lock_bh(&cmd->dataout_timeout_lock);
iscsit_start_dataout_timer(cmd, cmd->conn);
spin_unlock_bh(&cmd->dataout_timeout_lock);
}
if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
} else if (immed_ret == IMMEDIATE_DATA_ERL1_CRC_FAILURE) {
/*
* Immediate Data failed DataCRC and ERL>=1,
* silently drop this PDU and let the initiator
* plug the CmdSN gap.
*
* FIXME: Send Unsolicited NOPIN with reserved
* TTT here to help the initiator figure out
* the missing CmdSN, although they should be
* intelligent enough to determine the missing
* CmdSN and issue a retry to plug the sequence.
*/
cmd->i_state = ISTATE_REMOVE;
iscsit_add_cmd_to_immediate_queue(cmd, conn, cmd->i_state);
} else /* immed_ret == IMMEDIATE_DATA_CANNOT_RECOVER */
return -1;
return 0;
}
static u32 iscsit_do_crypto_hash_sg(
struct hash_desc *hash,
struct iscsi_cmd *cmd,
u32 data_offset,
u32 data_length,
u32 padding,
u8 *pad_bytes)
{
u32 data_crc;
u32 i;
struct scatterlist *sg;
unsigned int page_off;
crypto_hash_init(hash);
sg = cmd->first_data_sg;
page_off = cmd->first_data_sg_off;
i = 0;
while (data_length) {
u32 cur_len = min_t(u32, data_length, (sg[i].length - page_off));
crypto_hash_update(hash, &sg[i], cur_len);
data_length -= cur_len;
page_off = 0;
i++;
}
if (padding) {
struct scatterlist pad_sg;
sg_init_one(&pad_sg, pad_bytes, padding);
crypto_hash_update(hash, &pad_sg, padding);
}
crypto_hash_final(hash, (u8 *) &data_crc);
return data_crc;
}
static void iscsit_do_crypto_hash_buf(
struct hash_desc *hash,
unsigned char *buf,
u32 payload_length,
u32 padding,
u8 *pad_bytes,
u8 *data_crc)
{
struct scatterlist sg;
crypto_hash_init(hash);
sg_init_one(&sg, (u8 *)buf, payload_length);
crypto_hash_update(hash, &sg, payload_length);
if (padding) {
sg_init_one(&sg, pad_bytes, padding);
crypto_hash_update(hash, &sg, padding);
}
crypto_hash_final(hash, data_crc);
}
static int iscsit_handle_data_out(struct iscsi_conn *conn, unsigned char *buf)
{
int iov_ret, ooo_cmdsn = 0, ret;
u8 data_crc_failed = 0;
u32 checksum, iov_count = 0, padding = 0, rx_got = 0;
u32 rx_size = 0, payload_length;
struct iscsi_cmd *cmd = NULL;
struct se_cmd *se_cmd;
struct iscsi_data *hdr;
struct kvec *iov;
unsigned long flags;
hdr = (struct iscsi_data *) buf;
payload_length = ntoh24(hdr->dlength);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->ttt = be32_to_cpu(hdr->ttt);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
hdr->datasn = be32_to_cpu(hdr->datasn);
hdr->offset = be32_to_cpu(hdr->offset);
if (!payload_length) {
pr_err("DataOUT payload is ZERO, protocol error.\n");
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
/* iSCSI write */
spin_lock_bh(&conn->sess->session_stats_lock);
conn->sess->rx_data_octets += payload_length;
if (conn->sess->se_sess->se_node_acl) {
spin_lock(&conn->sess->se_sess->se_node_acl->stats_lock);
conn->sess->se_sess->se_node_acl->write_bytes += payload_length;
spin_unlock(&conn->sess->se_sess->se_node_acl->stats_lock);
}
spin_unlock_bh(&conn->sess->session_stats_lock);
if (payload_length > conn->conn_ops->MaxRecvDataSegmentLength) {
pr_err("DataSegmentLength: %u is greater than"
" MaxRecvDataSegmentLength: %u\n", payload_length,
conn->conn_ops->MaxRecvDataSegmentLength);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
cmd = iscsit_find_cmd_from_itt_or_dump(conn, hdr->itt,
payload_length);
if (!cmd)
return 0;
pr_debug("Got DataOut ITT: 0x%08x, TTT: 0x%08x,"
" DataSN: 0x%08x, Offset: %u, Length: %u, CID: %hu\n",
hdr->itt, hdr->ttt, hdr->datasn, hdr->offset,
payload_length, conn->cid);
if (cmd->cmd_flags & ICF_GOT_LAST_DATAOUT) {
pr_err("Command ITT: 0x%08x received DataOUT after"
" last DataOUT received, dumping payload\n",
cmd->init_task_tag);
return iscsit_dump_data_payload(conn, payload_length, 1);
}
if (cmd->data_direction != DMA_TO_DEVICE) {
pr_err("Command ITT: 0x%08x received DataOUT for a"
" NON-WRITE command.\n", cmd->init_task_tag);
return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
}
se_cmd = &cmd->se_cmd;
iscsit_mod_dataout_timer(cmd);
if ((hdr->offset + payload_length) > cmd->data_length) {
pr_err("DataOut Offset: %u, Length %u greater than"
" iSCSI Command EDTL %u, protocol error.\n",
hdr->offset, payload_length, cmd->data_length);
return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
1, 0, buf, cmd);
}
if (cmd->unsolicited_data) {
int dump_unsolicited_data = 0;
if (conn->sess->sess_ops->InitialR2T) {
pr_err("Received unexpected unsolicited data"
" while InitialR2T=Yes, protocol error.\n");
transport_send_check_condition_and_sense(&cmd->se_cmd,
TCM_UNEXPECTED_UNSOLICITED_DATA, 0);
return -1;
}
/*
* Special case for dealing with Unsolicited DataOUT
* and Unsupported SAM WRITE Opcodes and SE resource allocation
* failures;
*/
/* Something's amiss if we're not in WRITE_PENDING state... */
spin_lock_irqsave(&se_cmd->t_state_lock, flags);
WARN_ON(se_cmd->t_state != TRANSPORT_WRITE_PENDING);
spin_unlock_irqrestore(&se_cmd->t_state_lock, flags);
spin_lock_irqsave(&se_cmd->t_state_lock, flags);
if (!(se_cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) ||
target: Address legacy PYX_TRANSPORT_* return code breakage This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04 17:36:16 +08:00
(se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION))
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
dump_unsolicited_data = 1;
spin_unlock_irqrestore(&se_cmd->t_state_lock, flags);
if (dump_unsolicited_data) {
/*
* Check if a delayed TASK_ABORTED status needs to
* be sent now if the ISCSI_FLAG_CMD_FINAL has been
* received with the unsolicitied data out.
*/
if (hdr->flags & ISCSI_FLAG_CMD_FINAL)
iscsit_stop_dataout_timer(cmd);
transport_check_aborted_status(se_cmd,
(hdr->flags & ISCSI_FLAG_CMD_FINAL));
return iscsit_dump_data_payload(conn, payload_length, 1);
}
} else {
/*
* For the normal solicited data path:
*
* Check for a delayed TASK_ABORTED status and dump any
* incoming data out payload if one exists. Also, when the
* ISCSI_FLAG_CMD_FINAL is set to denote the end of the current
* data out sequence, we decrement outstanding_r2ts. Once
* outstanding_r2ts reaches zero, go ahead and send the delayed
* TASK_ABORTED status.
*/
if (atomic_read(&se_cmd->t_transport_aborted) != 0) {
if (hdr->flags & ISCSI_FLAG_CMD_FINAL)
if (--cmd->outstanding_r2ts < 1) {
iscsit_stop_dataout_timer(cmd);
transport_check_aborted_status(
se_cmd, 1);
}
return iscsit_dump_data_payload(conn, payload_length, 1);
}
}
/*
* Preform DataSN, DataSequenceInOrder, DataPDUInOrder, and
* within-command recovery checks before receiving the payload.
*/
ret = iscsit_check_pre_dataout(cmd, buf);
if (ret == DATAOUT_WITHIN_COMMAND_RECOVERY)
return 0;
else if (ret == DATAOUT_CANNOT_RECOVER)
return -1;
rx_size += payload_length;
iov = &cmd->iov_data[0];
iov_ret = iscsit_map_iovec(cmd, iov, hdr->offset, payload_length);
if (iov_ret < 0)
return -1;
iov_count += iov_ret;
padding = ((-payload_length) & 3);
if (padding != 0) {
iov[iov_count].iov_base = cmd->pad_bytes;
iov[iov_count++].iov_len = padding;
rx_size += padding;
pr_debug("Receiving %u padding bytes.\n", padding);
}
if (conn->conn_ops->DataDigest) {
iov[iov_count].iov_base = &checksum;
iov[iov_count++].iov_len = ISCSI_CRC_LEN;
rx_size += ISCSI_CRC_LEN;
}
rx_got = rx_data(conn, &cmd->iov_data[0], iov_count, rx_size);
iscsit_unmap_iovec(cmd);
if (rx_got != rx_size)
return -1;
if (conn->conn_ops->DataDigest) {
u32 data_crc;
data_crc = iscsit_do_crypto_hash_sg(&conn->conn_rx_hash, cmd,
hdr->offset, payload_length, padding,
cmd->pad_bytes);
if (checksum != data_crc) {
pr_err("ITT: 0x%08x, Offset: %u, Length: %u,"
" DataSN: 0x%08x, CRC32C DataDigest 0x%08x"
" does not match computed 0x%08x\n",
hdr->itt, hdr->offset, payload_length,
hdr->datasn, checksum, data_crc);
data_crc_failed = 1;
} else {
pr_debug("Got CRC32C DataDigest 0x%08x for"
" %u bytes of Data Out\n", checksum,
payload_length);
}
}
/*
* Increment post receive data and CRC values or perform
* within-command recovery.
*/
ret = iscsit_check_post_dataout(cmd, buf, data_crc_failed);
if ((ret == DATAOUT_NORMAL) || (ret == DATAOUT_WITHIN_COMMAND_RECOVERY))
return 0;
else if (ret == DATAOUT_SEND_R2T) {
iscsit_set_dataout_sequence_values(cmd);
iscsit_build_r2ts_for_cmd(cmd, conn, 0);
} else if (ret == DATAOUT_SEND_TO_TRANSPORT) {
/*
* Handle extra special case for out of order
* Unsolicited Data Out.
*/
spin_lock_bh(&cmd->istate_lock);
ooo_cmdsn = (cmd->cmd_flags & ICF_OOO_CMDSN);
cmd->cmd_flags |= ICF_GOT_LAST_DATAOUT;
cmd->i_state = ISTATE_RECEIVED_LAST_DATAOUT;
spin_unlock_bh(&cmd->istate_lock);
iscsit_stop_dataout_timer(cmd);
return (!ooo_cmdsn) ? transport_generic_handle_data(
&cmd->se_cmd) : 0;
} else /* DATAOUT_CANNOT_RECOVER */
return -1;
return 0;
}
static int iscsit_handle_nop_out(
struct iscsi_conn *conn,
unsigned char *buf)
{
unsigned char *ping_data = NULL;
int cmdsn_ret, niov = 0, ret = 0, rx_got, rx_size;
u32 checksum, data_crc, padding = 0, payload_length;
u64 lun;
struct iscsi_cmd *cmd = NULL;
struct kvec *iov = NULL;
struct iscsi_nopout *hdr;
hdr = (struct iscsi_nopout *) buf;
payload_length = ntoh24(hdr->dlength);
lun = get_unaligned_le64(&hdr->lun);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->ttt = be32_to_cpu(hdr->ttt);
hdr->cmdsn = be32_to_cpu(hdr->cmdsn);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
if ((hdr->itt == 0xFFFFFFFF) && !(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
pr_err("NOPOUT ITT is reserved, but Immediate Bit is"
" not set, protocol error.\n");
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
if (payload_length > conn->conn_ops->MaxRecvDataSegmentLength) {
pr_err("NOPOUT Ping Data DataSegmentLength: %u is"
" greater than MaxRecvDataSegmentLength: %u, protocol"
" error.\n", payload_length,
conn->conn_ops->MaxRecvDataSegmentLength);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
pr_debug("Got NOPOUT Ping %s ITT: 0x%08x, TTT: 0x%09x,"
" CmdSN: 0x%08x, ExpStatSN: 0x%08x, Length: %u\n",
(hdr->itt == 0xFFFFFFFF) ? "Response" : "Request",
hdr->itt, hdr->ttt, hdr->cmdsn, hdr->exp_statsn,
payload_length);
/*
* This is not a response to a Unsolicited NopIN, which means
* it can either be a NOPOUT ping request (with a valid ITT),
* or a NOPOUT not requesting a NOPIN (with a reserved ITT).
* Either way, make sure we allocate an struct iscsi_cmd, as both
* can contain ping data.
*/
if (hdr->ttt == 0xFFFFFFFF) {
cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
if (!cmd)
return iscsit_add_reject(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, buf, conn);
cmd->iscsi_opcode = ISCSI_OP_NOOP_OUT;
cmd->i_state = ISTATE_SEND_NOPIN;
cmd->immediate_cmd = ((hdr->opcode & ISCSI_OP_IMMEDIATE) ?
1 : 0);
conn->sess->init_task_tag = cmd->init_task_tag = hdr->itt;
cmd->targ_xfer_tag = 0xFFFFFFFF;
cmd->cmd_sn = hdr->cmdsn;
cmd->exp_stat_sn = hdr->exp_statsn;
cmd->data_direction = DMA_NONE;
}
if (payload_length && (hdr->ttt == 0xFFFFFFFF)) {
rx_size = payload_length;
ping_data = kzalloc(payload_length + 1, GFP_KERNEL);
if (!ping_data) {
pr_err("Unable to allocate memory for"
" NOPOUT ping data.\n");
ret = -1;
goto out;
}
iov = &cmd->iov_misc[0];
iov[niov].iov_base = ping_data;
iov[niov++].iov_len = payload_length;
padding = ((-payload_length) & 3);
if (padding != 0) {
pr_debug("Receiving %u additional bytes"
" for padding.\n", padding);
iov[niov].iov_base = &cmd->pad_bytes;
iov[niov++].iov_len = padding;
rx_size += padding;
}
if (conn->conn_ops->DataDigest) {
iov[niov].iov_base = &checksum;
iov[niov++].iov_len = ISCSI_CRC_LEN;
rx_size += ISCSI_CRC_LEN;
}
rx_got = rx_data(conn, &cmd->iov_misc[0], niov, rx_size);
if (rx_got != rx_size) {
ret = -1;
goto out;
}
if (conn->conn_ops->DataDigest) {
iscsit_do_crypto_hash_buf(&conn->conn_rx_hash,
ping_data, payload_length,
padding, cmd->pad_bytes,
(u8 *)&data_crc);
if (checksum != data_crc) {
pr_err("Ping data CRC32C DataDigest"
" 0x%08x does not match computed 0x%08x\n",
checksum, data_crc);
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Unable to recover from"
" NOPOUT Ping DataCRC failure while in"
" ERL=0.\n");
ret = -1;
goto out;
} else {
/*
* Silently drop this PDU and let the
* initiator plug the CmdSN gap.
*/
pr_debug("Dropping NOPOUT"
" Command CmdSN: 0x%08x due to"
" DataCRC error.\n", hdr->cmdsn);
ret = 0;
goto out;
}
} else {
pr_debug("Got CRC32C DataDigest"
" 0x%08x for %u bytes of ping data.\n",
checksum, payload_length);
}
}
ping_data[payload_length] = '\0';
/*
* Attach ping data to struct iscsi_cmd->buf_ptr.
*/
cmd->buf_ptr = (void *)ping_data;
cmd->buf_ptr_size = payload_length;
pr_debug("Got %u bytes of NOPOUT ping"
" data.\n", payload_length);
pr_debug("Ping Data: \"%s\"\n", ping_data);
}
if (hdr->itt != 0xFFFFFFFF) {
if (!cmd) {
pr_err("Checking CmdSN for NOPOUT,"
" but cmd is NULL!\n");
return -1;
}
/*
* Initiator is expecting a NopIN ping reply,
*/
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
if (hdr->opcode & ISCSI_OP_IMMEDIATE) {
iscsit_add_cmd_to_response_queue(cmd, conn,
cmd->i_state);
return 0;
}
cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
if (cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
ret = 0;
goto ping_out;
}
if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
return 0;
}
if (hdr->ttt != 0xFFFFFFFF) {
/*
* This was a response to a unsolicited NOPIN ping.
*/
cmd = iscsit_find_cmd_from_ttt(conn, hdr->ttt);
if (!cmd)
return -1;
iscsit_stop_nopin_response_timer(conn);
cmd->i_state = ISTATE_REMOVE;
iscsit_add_cmd_to_immediate_queue(cmd, conn, cmd->i_state);
iscsit_start_nopin_timer(conn);
} else {
/*
* Initiator is not expecting a NOPIN is response.
* Just ignore for now.
*
* iSCSI v19-91 10.18
* "A NOP-OUT may also be used to confirm a changed
* ExpStatSN if another PDU will not be available
* for a long time."
*/
ret = 0;
goto out;
}
return 0;
out:
if (cmd)
iscsit_release_cmd(cmd);
ping_out:
kfree(ping_data);
return ret;
}
static int iscsit_handle_task_mgt_cmd(
struct iscsi_conn *conn,
unsigned char *buf)
{
struct iscsi_cmd *cmd;
struct se_tmr_req *se_tmr;
struct iscsi_tmr_req *tmr_req;
struct iscsi_tm *hdr;
u32 payload_length;
int out_of_order_cmdsn = 0;
int ret;
u8 function;
hdr = (struct iscsi_tm *) buf;
payload_length = ntoh24(hdr->dlength);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->rtt = be32_to_cpu(hdr->rtt);
hdr->cmdsn = be32_to_cpu(hdr->cmdsn);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
hdr->refcmdsn = be32_to_cpu(hdr->refcmdsn);
hdr->exp_datasn = be32_to_cpu(hdr->exp_datasn);
hdr->flags &= ~ISCSI_FLAG_CMD_FINAL;
function = hdr->flags;
pr_debug("Got Task Management Request ITT: 0x%08x, CmdSN:"
" 0x%08x, Function: 0x%02x, RefTaskTag: 0x%08x, RefCmdSN:"
" 0x%08x, CID: %hu\n", hdr->itt, hdr->cmdsn, function,
hdr->rtt, hdr->refcmdsn, conn->cid);
if ((function != ISCSI_TM_FUNC_ABORT_TASK) &&
((function != ISCSI_TM_FUNC_TASK_REASSIGN) &&
(hdr->rtt != ISCSI_RESERVED_TAG))) {
pr_err("RefTaskTag should be set to 0xFFFFFFFF.\n");
hdr->rtt = ISCSI_RESERVED_TAG;
}
if ((function == ISCSI_TM_FUNC_TASK_REASSIGN) &&
!(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
pr_err("Task Management Request TASK_REASSIGN not"
" issued as immediate command, bad iSCSI Initiator"
"implementation\n");
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
if ((function != ISCSI_TM_FUNC_ABORT_TASK) &&
(hdr->refcmdsn != ISCSI_RESERVED_TAG))
hdr->refcmdsn = ISCSI_RESERVED_TAG;
cmd = iscsit_allocate_se_cmd_for_tmr(conn, function);
if (!cmd)
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, buf, conn);
cmd->iscsi_opcode = ISCSI_OP_SCSI_TMFUNC;
cmd->i_state = ISTATE_SEND_TASKMGTRSP;
cmd->immediate_cmd = ((hdr->opcode & ISCSI_OP_IMMEDIATE) ? 1 : 0);
cmd->init_task_tag = hdr->itt;
cmd->targ_xfer_tag = 0xFFFFFFFF;
cmd->cmd_sn = hdr->cmdsn;
cmd->exp_stat_sn = hdr->exp_statsn;
se_tmr = cmd->se_cmd.se_tmr_req;
tmr_req = cmd->tmr_req;
/*
* Locate the struct se_lun for all TMRs not related to ERL=2 TASK_REASSIGN
*/
if (function != ISCSI_TM_FUNC_TASK_REASSIGN) {
ret = iscsit_get_lun_for_tmr(cmd,
get_unaligned_le64(&hdr->lun));
if (ret < 0) {
cmd->se_cmd.se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
se_tmr->response = ISCSI_TMF_RSP_NO_LUN;
goto attach;
}
}
switch (function) {
case ISCSI_TM_FUNC_ABORT_TASK:
se_tmr->response = iscsit_tmr_abort_task(cmd, buf);
if (se_tmr->response != ISCSI_TMF_RSP_COMPLETE) {
cmd->se_cmd.se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
goto attach;
}
break;
case ISCSI_TM_FUNC_ABORT_TASK_SET:
case ISCSI_TM_FUNC_CLEAR_ACA:
case ISCSI_TM_FUNC_CLEAR_TASK_SET:
case ISCSI_TM_FUNC_LOGICAL_UNIT_RESET:
break;
case ISCSI_TM_FUNC_TARGET_WARM_RESET:
if (iscsit_tmr_task_warm_reset(conn, tmr_req, buf) < 0) {
cmd->se_cmd.se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
se_tmr->response = ISCSI_TMF_RSP_AUTH_FAILED;
goto attach;
}
break;
case ISCSI_TM_FUNC_TARGET_COLD_RESET:
if (iscsit_tmr_task_cold_reset(conn, tmr_req, buf) < 0) {
cmd->se_cmd.se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
se_tmr->response = ISCSI_TMF_RSP_AUTH_FAILED;
goto attach;
}
break;
case ISCSI_TM_FUNC_TASK_REASSIGN:
se_tmr->response = iscsit_tmr_task_reassign(cmd, buf);
/*
* Perform sanity checks on the ExpDataSN only if the
* TASK_REASSIGN was successful.
*/
if (se_tmr->response != ISCSI_TMF_RSP_COMPLETE)
break;
if (iscsit_check_task_reassign_expdatasn(tmr_req, conn) < 0)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_INVALID, 1, 1,
buf, cmd);
break;
default:
pr_err("Unknown TMR function: 0x%02x, protocol"
" error.\n", function);
cmd->se_cmd.se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
se_tmr->response = ISCSI_TMF_RSP_NOT_SUPPORTED;
goto attach;
}
if ((function != ISCSI_TM_FUNC_TASK_REASSIGN) &&
(se_tmr->response == ISCSI_TMF_RSP_COMPLETE))
se_tmr->call_transport = 1;
attach:
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
if (!(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
int cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
if (cmdsn_ret == CMDSN_HIGHER_THAN_EXP)
out_of_order_cmdsn = 1;
else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return 0;
else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
}
iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
if (out_of_order_cmdsn || !(hdr->opcode & ISCSI_OP_IMMEDIATE))
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return 0;
/*
* Found the referenced task, send to transport for processing.
*/
if (se_tmr->call_transport)
return transport_generic_handle_tmr(&cmd->se_cmd);
/*
* Could not find the referenced LUN, task, or Task Management
* command not authorized or supported. Change state and
* let the tx_thread send the response.
*
* For connection recovery, this is also the default action for
* TMR TASK_REASSIGN.
*/
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
}
/* #warning FIXME: Support Text Command parameters besides SendTargets */
static int iscsit_handle_text_cmd(
struct iscsi_conn *conn,
unsigned char *buf)
{
char *text_ptr, *text_in;
int cmdsn_ret, niov = 0, rx_got, rx_size;
u32 checksum = 0, data_crc = 0, payload_length;
u32 padding = 0, pad_bytes = 0, text_length = 0;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_cmd *cmd;
struct kvec iov[3];
struct iscsi_text *hdr;
hdr = (struct iscsi_text *) buf;
payload_length = ntoh24(hdr->dlength);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->ttt = be32_to_cpu(hdr->ttt);
hdr->cmdsn = be32_to_cpu(hdr->cmdsn);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
if (payload_length > conn->conn_ops->MaxRecvDataSegmentLength) {
pr_err("Unable to accept text parameter length: %u"
"greater than MaxRecvDataSegmentLength %u.\n",
payload_length, conn->conn_ops->MaxRecvDataSegmentLength);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
pr_debug("Got Text Request: ITT: 0x%08x, CmdSN: 0x%08x,"
" ExpStatSN: 0x%08x, Length: %u\n", hdr->itt, hdr->cmdsn,
hdr->exp_statsn, payload_length);
rx_size = text_length = payload_length;
if (text_length) {
text_in = kzalloc(text_length, GFP_KERNEL);
if (!text_in) {
pr_err("Unable to allocate memory for"
" incoming text parameters\n");
return -1;
}
memset(iov, 0, 3 * sizeof(struct kvec));
iov[niov].iov_base = text_in;
iov[niov++].iov_len = text_length;
padding = ((-payload_length) & 3);
if (padding != 0) {
iov[niov].iov_base = &pad_bytes;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
iov[niov++].iov_len = padding;
rx_size += padding;
pr_debug("Receiving %u additional bytes"
" for padding.\n", padding);
}
if (conn->conn_ops->DataDigest) {
iov[niov].iov_base = &checksum;
iov[niov++].iov_len = ISCSI_CRC_LEN;
rx_size += ISCSI_CRC_LEN;
}
rx_got = rx_data(conn, &iov[0], niov, rx_size);
if (rx_got != rx_size) {
kfree(text_in);
return -1;
}
if (conn->conn_ops->DataDigest) {
iscsit_do_crypto_hash_buf(&conn->conn_rx_hash,
text_in, text_length,
padding, (u8 *)&pad_bytes,
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
(u8 *)&data_crc);
if (checksum != data_crc) {
pr_err("Text data CRC32C DataDigest"
" 0x%08x does not match computed"
" 0x%08x\n", checksum, data_crc);
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Unable to recover from"
" Text Data digest failure while in"
" ERL=0.\n");
kfree(text_in);
return -1;
} else {
/*
* Silently drop this PDU and let the
* initiator plug the CmdSN gap.
*/
pr_debug("Dropping Text"
" Command CmdSN: 0x%08x due to"
" DataCRC error.\n", hdr->cmdsn);
kfree(text_in);
return 0;
}
} else {
pr_debug("Got CRC32C DataDigest"
" 0x%08x for %u bytes of text data.\n",
checksum, text_length);
}
}
text_in[text_length - 1] = '\0';
pr_debug("Successfully read %d bytes of text"
" data.\n", text_length);
if (strncmp("SendTargets", text_in, 11) != 0) {
pr_err("Received Text Data that is not"
" SendTargets, cannot continue.\n");
kfree(text_in);
return -1;
}
text_ptr = strchr(text_in, '=');
if (!text_ptr) {
pr_err("No \"=\" separator found in Text Data,"
" cannot continue.\n");
kfree(text_in);
return -1;
}
if (strncmp("=All", text_ptr, 4) != 0) {
pr_err("Unable to locate All value for"
" SendTargets key, cannot continue.\n");
kfree(text_in);
return -1;
}
/*#warning Support SendTargets=(iSCSI Target Name/Nothing) values. */
kfree(text_in);
}
cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
if (!cmd)
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
1, buf, conn);
cmd->iscsi_opcode = ISCSI_OP_TEXT;
cmd->i_state = ISTATE_SEND_TEXTRSP;
cmd->immediate_cmd = ((hdr->opcode & ISCSI_OP_IMMEDIATE) ? 1 : 0);
conn->sess->init_task_tag = cmd->init_task_tag = hdr->itt;
cmd->targ_xfer_tag = 0xFFFFFFFF;
cmd->cmd_sn = hdr->cmdsn;
cmd->exp_stat_sn = hdr->exp_statsn;
cmd->data_direction = DMA_NONE;
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
if (!(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
return 0;
}
return iscsit_execute_cmd(cmd, 0);
}
int iscsit_logout_closesession(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
{
struct iscsi_conn *conn_p;
struct iscsi_session *sess = conn->sess;
pr_debug("Received logout request CLOSESESSION on CID: %hu"
" for SID: %u.\n", conn->cid, conn->sess->sid);
atomic_set(&sess->session_logout, 1);
atomic_set(&conn->conn_logout_remove, 1);
conn->conn_logout_reason = ISCSI_LOGOUT_REASON_CLOSE_SESSION;
iscsit_inc_conn_usage_count(conn);
iscsit_inc_session_usage_count(sess);
spin_lock_bh(&sess->conn_lock);
list_for_each_entry(conn_p, &sess->sess_conn_list, conn_list) {
if (conn_p->conn_state != TARG_CONN_STATE_LOGGED_IN)
continue;
pr_debug("Moving to TARG_CONN_STATE_IN_LOGOUT.\n");
conn_p->conn_state = TARG_CONN_STATE_IN_LOGOUT;
}
spin_unlock_bh(&sess->conn_lock);
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
}
int iscsit_logout_closeconnection(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
{
struct iscsi_conn *l_conn;
struct iscsi_session *sess = conn->sess;
pr_debug("Received logout request CLOSECONNECTION for CID:"
" %hu on CID: %hu.\n", cmd->logout_cid, conn->cid);
/*
* A Logout Request with a CLOSECONNECTION reason code for a CID
* can arrive on a connection with a differing CID.
*/
if (conn->cid == cmd->logout_cid) {
spin_lock_bh(&conn->state_lock);
pr_debug("Moving to TARG_CONN_STATE_IN_LOGOUT.\n");
conn->conn_state = TARG_CONN_STATE_IN_LOGOUT;
atomic_set(&conn->conn_logout_remove, 1);
conn->conn_logout_reason = ISCSI_LOGOUT_REASON_CLOSE_CONNECTION;
iscsit_inc_conn_usage_count(conn);
spin_unlock_bh(&conn->state_lock);
} else {
/*
* Handle all different cid CLOSECONNECTION requests in
* iscsit_logout_post_handler_diffcid() as to give enough
* time for any non immediate command's CmdSN to be
* acknowledged on the connection in question.
*
* Here we simply make sure the CID is still around.
*/
l_conn = iscsit_get_conn_from_cid(sess,
cmd->logout_cid);
if (!l_conn) {
cmd->logout_response = ISCSI_LOGOUT_CID_NOT_FOUND;
iscsit_add_cmd_to_response_queue(cmd, conn,
cmd->i_state);
return 0;
}
iscsit_dec_conn_usage_count(l_conn);
}
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
}
int iscsit_logout_removeconnforrecovery(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
pr_debug("Received explicit REMOVECONNFORRECOVERY logout for"
" CID: %hu on CID: %hu.\n", cmd->logout_cid, conn->cid);
if (sess->sess_ops->ErrorRecoveryLevel != 2) {
pr_err("Received Logout Request REMOVECONNFORRECOVERY"
" while ERL!=2.\n");
cmd->logout_response = ISCSI_LOGOUT_RECOVERY_UNSUPPORTED;
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
}
if (conn->cid == cmd->logout_cid) {
pr_err("Received Logout Request REMOVECONNFORRECOVERY"
" with CID: %hu on CID: %hu, implementation error.\n",
cmd->logout_cid, conn->cid);
cmd->logout_response = ISCSI_LOGOUT_CLEANUP_FAILED;
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
}
iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
return 0;
}
static int iscsit_handle_logout_cmd(
struct iscsi_conn *conn,
unsigned char *buf)
{
int cmdsn_ret, logout_remove = 0;
u8 reason_code = 0;
struct iscsi_cmd *cmd;
struct iscsi_logout *hdr;
struct iscsi_tiqn *tiqn = iscsit_snmp_get_tiqn(conn);
hdr = (struct iscsi_logout *) buf;
reason_code = (hdr->flags & 0x7f);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->cid = be16_to_cpu(hdr->cid);
hdr->cmdsn = be32_to_cpu(hdr->cmdsn);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
if (tiqn) {
spin_lock(&tiqn->logout_stats.lock);
if (reason_code == ISCSI_LOGOUT_REASON_CLOSE_SESSION)
tiqn->logout_stats.normal_logouts++;
else
tiqn->logout_stats.abnormal_logouts++;
spin_unlock(&tiqn->logout_stats.lock);
}
pr_debug("Got Logout Request ITT: 0x%08x CmdSN: 0x%08x"
" ExpStatSN: 0x%08x Reason: 0x%02x CID: %hu on CID: %hu\n",
hdr->itt, hdr->cmdsn, hdr->exp_statsn, reason_code,
hdr->cid, conn->cid);
if (conn->conn_state != TARG_CONN_STATE_LOGGED_IN) {
pr_err("Received logout request on connection that"
" is not in logged in state, ignoring request.\n");
return 0;
}
cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
if (!cmd)
return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES, 1,
buf, conn);
cmd->iscsi_opcode = ISCSI_OP_LOGOUT;
cmd->i_state = ISTATE_SEND_LOGOUTRSP;
cmd->immediate_cmd = ((hdr->opcode & ISCSI_OP_IMMEDIATE) ? 1 : 0);
conn->sess->init_task_tag = cmd->init_task_tag = hdr->itt;
cmd->targ_xfer_tag = 0xFFFFFFFF;
cmd->cmd_sn = hdr->cmdsn;
cmd->exp_stat_sn = hdr->exp_statsn;
cmd->logout_cid = hdr->cid;
cmd->logout_reason = reason_code;
cmd->data_direction = DMA_NONE;
/*
* We need to sleep in these cases (by returning 1) until the Logout
* Response gets sent in the tx thread.
*/
if ((reason_code == ISCSI_LOGOUT_REASON_CLOSE_SESSION) ||
((reason_code == ISCSI_LOGOUT_REASON_CLOSE_CONNECTION) &&
(hdr->cid == conn->cid)))
logout_remove = 1;
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_list, &conn->conn_cmd_list);
spin_unlock_bh(&conn->cmd_lock);
if (reason_code != ISCSI_LOGOUT_REASON_RECOVERY)
iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
/*
* Immediate commands are executed, well, immediately.
* Non-Immediate Logout Commands are executed in CmdSN order.
*/
if (hdr->opcode & ISCSI_OP_IMMEDIATE) {
int ret = iscsit_execute_cmd(cmd, 0);
if (ret < 0)
return ret;
} else {
cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
if (cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
logout_remove = 0;
} else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER) {
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
}
}
return logout_remove;
}
static int iscsit_handle_snack(
struct iscsi_conn *conn,
unsigned char *buf)
{
u32 unpacked_lun;
u64 lun;
struct iscsi_snack *hdr;
hdr = (struct iscsi_snack *) buf;
hdr->flags &= ~ISCSI_FLAG_CMD_FINAL;
lun = get_unaligned_le64(&hdr->lun);
unpacked_lun = scsilun_to_int((struct scsi_lun *)&lun);
hdr->itt = be32_to_cpu(hdr->itt);
hdr->ttt = be32_to_cpu(hdr->ttt);
hdr->exp_statsn = be32_to_cpu(hdr->exp_statsn);
hdr->begrun = be32_to_cpu(hdr->begrun);
hdr->runlength = be32_to_cpu(hdr->runlength);
pr_debug("Got ISCSI_INIT_SNACK, ITT: 0x%08x, ExpStatSN:"
" 0x%08x, Type: 0x%02x, BegRun: 0x%08x, RunLength: 0x%08x,"
" CID: %hu\n", hdr->itt, hdr->exp_statsn, hdr->flags,
hdr->begrun, hdr->runlength, conn->cid);
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Initiator sent SNACK request while in"
" ErrorRecoveryLevel=0.\n");
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
/*
* SNACK_DATA and SNACK_R2T are both 0, so check which function to
* call from inside iscsi_send_recovery_datain_or_r2t().
*/
switch (hdr->flags & ISCSI_FLAG_SNACK_TYPE_MASK) {
case 0:
return iscsit_handle_recovery_datain_or_r2t(conn, buf,
hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength);
case ISCSI_FLAG_SNACK_TYPE_STATUS:
return iscsit_handle_status_snack(conn, hdr->itt, hdr->ttt,
hdr->begrun, hdr->runlength);
case ISCSI_FLAG_SNACK_TYPE_DATA_ACK:
return iscsit_handle_data_ack(conn, hdr->ttt, hdr->begrun,
hdr->runlength);
case ISCSI_FLAG_SNACK_TYPE_RDATA:
/* FIXME: Support R-Data SNACK */
pr_err("R-Data SNACK Not Supported.\n");
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
default:
pr_err("Unknown SNACK type 0x%02x, protocol"
" error.\n", hdr->flags & 0x0f);
return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buf, conn);
}
return 0;
}
static void iscsit_rx_thread_wait_for_tcp(struct iscsi_conn *conn)
{
if ((conn->sock->sk->sk_shutdown & SEND_SHUTDOWN) ||
(conn->sock->sk->sk_shutdown & RCV_SHUTDOWN)) {
wait_for_completion_interruptible_timeout(
&conn->rx_half_close_comp,
ISCSI_RX_THREAD_TCP_TIMEOUT * HZ);
}
}
static int iscsit_handle_immediate_data(
struct iscsi_cmd *cmd,
unsigned char *buf,
u32 length)
{
int iov_ret, rx_got = 0, rx_size = 0;
u32 checksum, iov_count = 0, padding = 0;
struct iscsi_conn *conn = cmd->conn;
struct kvec *iov;
iov_ret = iscsit_map_iovec(cmd, cmd->iov_data, cmd->write_data_done, length);
if (iov_ret < 0)
return IMMEDIATE_DATA_CANNOT_RECOVER;
rx_size = length;
iov_count = iov_ret;
iov = &cmd->iov_data[0];
padding = ((-length) & 3);
if (padding != 0) {
iov[iov_count].iov_base = cmd->pad_bytes;
iov[iov_count++].iov_len = padding;
rx_size += padding;
}
if (conn->conn_ops->DataDigest) {
iov[iov_count].iov_base = &checksum;
iov[iov_count++].iov_len = ISCSI_CRC_LEN;
rx_size += ISCSI_CRC_LEN;
}
rx_got = rx_data(conn, &cmd->iov_data[0], iov_count, rx_size);
iscsit_unmap_iovec(cmd);
if (rx_got != rx_size) {
iscsit_rx_thread_wait_for_tcp(conn);
return IMMEDIATE_DATA_CANNOT_RECOVER;
}
if (conn->conn_ops->DataDigest) {
u32 data_crc;
data_crc = iscsit_do_crypto_hash_sg(&conn->conn_rx_hash, cmd,
cmd->write_data_done, length, padding,
cmd->pad_bytes);
if (checksum != data_crc) {
pr_err("ImmediateData CRC32C DataDigest 0x%08x"
" does not match computed 0x%08x\n", checksum,
data_crc);
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Unable to recover from"
" Immediate Data digest failure while"
" in ERL=0.\n");
iscsit_add_reject_from_cmd(
ISCSI_REASON_DATA_DIGEST_ERROR,
1, 0, buf, cmd);
return IMMEDIATE_DATA_CANNOT_RECOVER;
} else {
iscsit_add_reject_from_cmd(
ISCSI_REASON_DATA_DIGEST_ERROR,
0, 0, buf, cmd);
return IMMEDIATE_DATA_ERL1_CRC_FAILURE;
}
} else {
pr_debug("Got CRC32C DataDigest 0x%08x for"
" %u bytes of Immediate Data\n", checksum,
length);
}
}
cmd->write_data_done += length;
if (cmd->write_data_done == cmd->data_length) {
spin_lock_bh(&cmd->istate_lock);
cmd->cmd_flags |= ICF_GOT_LAST_DATAOUT;
cmd->i_state = ISTATE_RECEIVED_LAST_DATAOUT;
spin_unlock_bh(&cmd->istate_lock);
}
return IMMEDIATE_DATA_NORMAL_OPERATION;
}
/*
* Called with sess->conn_lock held.
*/
/* #warning iscsi_build_conn_drop_async_message() only sends out on connections
with active network interface */
static void iscsit_build_conn_drop_async_message(struct iscsi_conn *conn)
{
struct iscsi_cmd *cmd;
struct iscsi_conn *conn_p;
/*
* Only send a Asynchronous Message on connections whos network
* interface is still functional.
*/
list_for_each_entry(conn_p, &conn->sess->sess_conn_list, conn_list) {
if (conn_p->conn_state == TARG_CONN_STATE_LOGGED_IN) {
iscsit_inc_conn_usage_count(conn_p);
break;
}
}
if (!conn_p)
return;
cmd = iscsit_allocate_cmd(conn_p, GFP_KERNEL);
if (!cmd) {
iscsit_dec_conn_usage_count(conn_p);
return;
}
cmd->logout_cid = conn->cid;
cmd->iscsi_opcode = ISCSI_OP_ASYNC_EVENT;
cmd->i_state = ISTATE_SEND_ASYNCMSG;
spin_lock_bh(&conn_p->cmd_lock);
list_add_tail(&cmd->i_list, &conn_p->conn_cmd_list);
spin_unlock_bh(&conn_p->cmd_lock);
iscsit_add_cmd_to_response_queue(cmd, conn_p, cmd->i_state);
iscsit_dec_conn_usage_count(conn_p);
}
static int iscsit_send_conn_drop_async_message(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
struct iscsi_async *hdr;
cmd->tx_size = ISCSI_HDR_LEN;
cmd->iscsi_opcode = ISCSI_OP_ASYNC_EVENT;
hdr = (struct iscsi_async *) cmd->pdu;
hdr->opcode = ISCSI_OP_ASYNC_EVENT;
hdr->flags = ISCSI_FLAG_CMD_FINAL;
cmd->init_task_tag = 0xFFFFFFFF;
cmd->targ_xfer_tag = 0xFFFFFFFF;
put_unaligned_be64(0xFFFFFFFFFFFFFFFFULL, &hdr->rsvd4[0]);
cmd->stat_sn = conn->stat_sn++;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
hdr->async_event = ISCSI_ASYNC_MSG_DROPPING_CONNECTION;
hdr->param1 = cpu_to_be16(cmd->logout_cid);
hdr->param2 = cpu_to_be16(conn->sess->sess_ops->DefaultTime2Wait);
hdr->param3 = cpu_to_be16(conn->sess->sess_ops->DefaultTime2Retain);
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
cmd->tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32C HeaderDigest to"
" Async Message 0x%08x\n", *header_digest);
}
cmd->iov_misc[0].iov_base = cmd->pdu;
cmd->iov_misc[0].iov_len = cmd->tx_size;
cmd->iov_misc_count = 1;
pr_debug("Sending Connection Dropped Async Message StatSN:"
" 0x%08x, for CID: %hu on CID: %hu\n", cmd->stat_sn,
cmd->logout_cid, conn->cid);
return 0;
}
static int iscsit_send_data_in(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn,
int *eodr)
{
int iov_ret = 0, set_statsn = 0;
u32 iov_count = 0, tx_size = 0;
struct iscsi_datain datain;
struct iscsi_datain_req *dr;
struct iscsi_data_rsp *hdr;
struct kvec *iov;
memset(&datain, 0, sizeof(struct iscsi_datain));
dr = iscsit_get_datain_values(cmd, &datain);
if (!dr) {
pr_err("iscsit_get_datain_values failed for ITT: 0x%08x\n",
cmd->init_task_tag);
return -1;
}
/*
* Be paranoid and double check the logic for now.
*/
if ((datain.offset + datain.length) > cmd->data_length) {
pr_err("Command ITT: 0x%08x, datain.offset: %u and"
" datain.length: %u exceeds cmd->data_length: %u\n",
cmd->init_task_tag, datain.offset, datain.length,
cmd->data_length);
return -1;
}
spin_lock_bh(&conn->sess->session_stats_lock);
conn->sess->tx_data_octets += datain.length;
if (conn->sess->se_sess->se_node_acl) {
spin_lock(&conn->sess->se_sess->se_node_acl->stats_lock);
conn->sess->se_sess->se_node_acl->read_bytes += datain.length;
spin_unlock(&conn->sess->se_sess->se_node_acl->stats_lock);
}
spin_unlock_bh(&conn->sess->session_stats_lock);
/*
* Special case for successfully execution w/ both DATAIN
* and Sense Data.
*/
if ((datain.flags & ISCSI_FLAG_DATA_STATUS) &&
(cmd->se_cmd.se_cmd_flags & SCF_TRANSPORT_TASK_SENSE))
datain.flags &= ~ISCSI_FLAG_DATA_STATUS;
else {
if ((dr->dr_complete == DATAIN_COMPLETE_NORMAL) ||
(dr->dr_complete == DATAIN_COMPLETE_CONNECTION_RECOVERY)) {
iscsit_increment_maxcmdsn(cmd, conn->sess);
cmd->stat_sn = conn->stat_sn++;
set_statsn = 1;
} else if (dr->dr_complete ==
DATAIN_COMPLETE_WITHIN_COMMAND_RECOVERY)
set_statsn = 1;
}
hdr = (struct iscsi_data_rsp *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_SCSI_DATA_IN;
hdr->flags = datain.flags;
if (hdr->flags & ISCSI_FLAG_DATA_STATUS) {
if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) {
hdr->flags |= ISCSI_FLAG_DATA_OVERFLOW;
hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
} else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) {
hdr->flags |= ISCSI_FLAG_DATA_UNDERFLOW;
hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
}
hton24(hdr->dlength, datain.length);
if (hdr->flags & ISCSI_FLAG_DATA_ACK)
int_to_scsilun(cmd->se_cmd.orig_fe_lun,
(struct scsi_lun *)&hdr->lun);
else
put_unaligned_le64(0xFFFFFFFFFFFFFFFFULL, &hdr->lun);
hdr->itt = cpu_to_be32(cmd->init_task_tag);
hdr->ttt = (hdr->flags & ISCSI_FLAG_DATA_ACK) ?
cpu_to_be32(cmd->targ_xfer_tag) :
0xFFFFFFFF;
hdr->statsn = (set_statsn) ? cpu_to_be32(cmd->stat_sn) :
0xFFFFFFFF;
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
hdr->datasn = cpu_to_be32(datain.data_sn);
hdr->offset = cpu_to_be32(datain.offset);
iov = &cmd->iov_data[0];
iov[iov_count].iov_base = cmd->pdu;
iov[iov_count++].iov_len = ISCSI_HDR_LEN;
tx_size += ISCSI_HDR_LEN;
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
iov[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 HeaderDigest"
" for DataIN PDU 0x%08x\n", *header_digest);
}
iov_ret = iscsit_map_iovec(cmd, &cmd->iov_data[1], datain.offset, datain.length);
if (iov_ret < 0)
return -1;
iov_count += iov_ret;
tx_size += datain.length;
cmd->padding = ((-datain.length) & 3);
if (cmd->padding) {
iov[iov_count].iov_base = cmd->pad_bytes;
iov[iov_count++].iov_len = cmd->padding;
tx_size += cmd->padding;
pr_debug("Attaching %u padding bytes\n",
cmd->padding);
}
if (conn->conn_ops->DataDigest) {
cmd->data_crc = iscsit_do_crypto_hash_sg(&conn->conn_tx_hash, cmd,
datain.offset, datain.length, cmd->padding, cmd->pad_bytes);
iov[iov_count].iov_base = &cmd->data_crc;
iov[iov_count++].iov_len = ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attached CRC32C DataDigest %d bytes, crc"
" 0x%08x\n", datain.length+cmd->padding, cmd->data_crc);
}
cmd->iov_data_count = iov_count;
cmd->tx_size = tx_size;
pr_debug("Built DataIN ITT: 0x%08x, StatSN: 0x%08x,"
" DataSN: 0x%08x, Offset: %u, Length: %u, CID: %hu\n",
cmd->init_task_tag, ntohl(hdr->statsn), ntohl(hdr->datasn),
ntohl(hdr->offset), datain.length, conn->cid);
if (dr->dr_complete) {
*eodr = (cmd->se_cmd.se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) ?
2 : 1;
iscsit_free_datain_req(cmd, dr);
}
return 0;
}
static int iscsit_send_logout_response(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
int niov = 0, tx_size;
struct iscsi_conn *logout_conn = NULL;
struct iscsi_conn_recovery *cr = NULL;
struct iscsi_session *sess = conn->sess;
struct kvec *iov;
struct iscsi_logout_rsp *hdr;
/*
* The actual shutting down of Sessions and/or Connections
* for CLOSESESSION and CLOSECONNECTION Logout Requests
* is done in scsi_logout_post_handler().
*/
switch (cmd->logout_reason) {
case ISCSI_LOGOUT_REASON_CLOSE_SESSION:
pr_debug("iSCSI session logout successful, setting"
" logout response to ISCSI_LOGOUT_SUCCESS.\n");
cmd->logout_response = ISCSI_LOGOUT_SUCCESS;
break;
case ISCSI_LOGOUT_REASON_CLOSE_CONNECTION:
if (cmd->logout_response == ISCSI_LOGOUT_CID_NOT_FOUND)
break;
/*
* For CLOSECONNECTION logout requests carrying
* a matching logout CID -> local CID, the reference
* for the local CID will have been incremented in
* iscsi_logout_closeconnection().
*
* For CLOSECONNECTION logout requests carrying
* a different CID than the connection it arrived
* on, the connection responding to cmd->logout_cid
* is stopped in iscsit_logout_post_handler_diffcid().
*/
pr_debug("iSCSI CID: %hu logout on CID: %hu"
" successful.\n", cmd->logout_cid, conn->cid);
cmd->logout_response = ISCSI_LOGOUT_SUCCESS;
break;
case ISCSI_LOGOUT_REASON_RECOVERY:
if ((cmd->logout_response == ISCSI_LOGOUT_RECOVERY_UNSUPPORTED) ||
(cmd->logout_response == ISCSI_LOGOUT_CLEANUP_FAILED))
break;
/*
* If the connection is still active from our point of view
* force connection recovery to occur.
*/
logout_conn = iscsit_get_conn_from_cid_rcfr(sess,
cmd->logout_cid);
if ((logout_conn)) {
iscsit_connection_reinstatement_rcfr(logout_conn);
iscsit_dec_conn_usage_count(logout_conn);
}
cr = iscsit_get_inactive_connection_recovery_entry(
conn->sess, cmd->logout_cid);
if (!cr) {
pr_err("Unable to locate CID: %hu for"
" REMOVECONNFORRECOVERY Logout Request.\n",
cmd->logout_cid);
cmd->logout_response = ISCSI_LOGOUT_CID_NOT_FOUND;
break;
}
iscsit_discard_cr_cmds_by_expstatsn(cr, cmd->exp_stat_sn);
pr_debug("iSCSI REMOVECONNFORRECOVERY logout"
" for recovery for CID: %hu on CID: %hu successful.\n",
cmd->logout_cid, conn->cid);
cmd->logout_response = ISCSI_LOGOUT_SUCCESS;
break;
default:
pr_err("Unknown cmd->logout_reason: 0x%02x\n",
cmd->logout_reason);
return -1;
}
tx_size = ISCSI_HDR_LEN;
hdr = (struct iscsi_logout_rsp *)cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_LOGOUT_RSP;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hdr->response = cmd->logout_response;
hdr->itt = cpu_to_be32(cmd->init_task_tag);
cmd->stat_sn = conn->stat_sn++;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
iscsit_increment_maxcmdsn(cmd, conn->sess);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
iov = &cmd->iov_misc[0];
iov[niov].iov_base = cmd->pdu;
iov[niov++].iov_len = ISCSI_HDR_LEN;
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
iov[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32C HeaderDigest to"
" Logout Response 0x%08x\n", *header_digest);
}
cmd->iov_misc_count = niov;
cmd->tx_size = tx_size;
pr_debug("Sending Logout Response ITT: 0x%08x StatSN:"
" 0x%08x Response: 0x%02x CID: %hu on CID: %hu\n",
cmd->init_task_tag, cmd->stat_sn, hdr->response,
cmd->logout_cid, conn->cid);
return 0;
}
/*
* Unsolicited NOPIN, either requesting a response or not.
*/
static int iscsit_send_unsolicited_nopin(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn,
int want_response)
{
int tx_size = ISCSI_HDR_LEN;
struct iscsi_nopin *hdr;
hdr = (struct iscsi_nopin *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_NOOP_IN;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hdr->itt = cpu_to_be32(cmd->init_task_tag);
hdr->ttt = cpu_to_be32(cmd->targ_xfer_tag);
cmd->stat_sn = conn->stat_sn;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32C HeaderDigest to"
" NopIN 0x%08x\n", *header_digest);
}
cmd->iov_misc[0].iov_base = cmd->pdu;
cmd->iov_misc[0].iov_len = tx_size;
cmd->iov_misc_count = 1;
cmd->tx_size = tx_size;
pr_debug("Sending Unsolicited NOPIN TTT: 0x%08x StatSN:"
" 0x%08x CID: %hu\n", hdr->ttt, cmd->stat_sn, conn->cid);
return 0;
}
static int iscsit_send_nopin_response(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
int niov = 0, tx_size;
u32 padding = 0;
struct kvec *iov;
struct iscsi_nopin *hdr;
tx_size = ISCSI_HDR_LEN;
hdr = (struct iscsi_nopin *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_NOOP_IN;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hton24(hdr->dlength, cmd->buf_ptr_size);
put_unaligned_le64(0xFFFFFFFFFFFFFFFFULL, &hdr->lun);
hdr->itt = cpu_to_be32(cmd->init_task_tag);
hdr->ttt = cpu_to_be32(cmd->targ_xfer_tag);
cmd->stat_sn = conn->stat_sn++;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
iscsit_increment_maxcmdsn(cmd, conn->sess);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
iov = &cmd->iov_misc[0];
iov[niov].iov_base = cmd->pdu;
iov[niov++].iov_len = ISCSI_HDR_LEN;
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
iov[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32C HeaderDigest"
" to NopIn 0x%08x\n", *header_digest);
}
/*
* NOPOUT Ping Data is attached to struct iscsi_cmd->buf_ptr.
* NOPOUT DataSegmentLength is at struct iscsi_cmd->buf_ptr_size.
*/
if (cmd->buf_ptr_size) {
iov[niov].iov_base = cmd->buf_ptr;
iov[niov++].iov_len = cmd->buf_ptr_size;
tx_size += cmd->buf_ptr_size;
pr_debug("Echoing back %u bytes of ping"
" data.\n", cmd->buf_ptr_size);
padding = ((-cmd->buf_ptr_size) & 3);
if (padding != 0) {
iov[niov].iov_base = &cmd->pad_bytes;
iov[niov++].iov_len = padding;
tx_size += padding;
pr_debug("Attaching %u additional"
" padding bytes.\n", padding);
}
if (conn->conn_ops->DataDigest) {
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
cmd->buf_ptr, cmd->buf_ptr_size,
padding, (u8 *)&cmd->pad_bytes,
(u8 *)&cmd->data_crc);
iov[niov].iov_base = &cmd->data_crc;
iov[niov++].iov_len = ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attached DataDigest for %u"
" bytes of ping data, CRC 0x%08x\n",
cmd->buf_ptr_size, cmd->data_crc);
}
}
cmd->iov_misc_count = niov;
cmd->tx_size = tx_size;
pr_debug("Sending NOPIN Response ITT: 0x%08x, TTT:"
" 0x%08x, StatSN: 0x%08x, Length %u\n", cmd->init_task_tag,
cmd->targ_xfer_tag, cmd->stat_sn, cmd->buf_ptr_size);
return 0;
}
int iscsit_send_r2t(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
int tx_size = 0;
struct iscsi_r2t *r2t;
struct iscsi_r2t_rsp *hdr;
r2t = iscsit_get_r2t_from_list(cmd);
if (!r2t)
return -1;
hdr = (struct iscsi_r2t_rsp *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_R2T;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
int_to_scsilun(cmd->se_cmd.orig_fe_lun,
(struct scsi_lun *)&hdr->lun);
hdr->itt = cpu_to_be32(cmd->init_task_tag);
spin_lock_bh(&conn->sess->ttt_lock);
r2t->targ_xfer_tag = conn->sess->targ_xfer_tag++;
if (r2t->targ_xfer_tag == 0xFFFFFFFF)
r2t->targ_xfer_tag = conn->sess->targ_xfer_tag++;
spin_unlock_bh(&conn->sess->ttt_lock);
hdr->ttt = cpu_to_be32(r2t->targ_xfer_tag);
hdr->statsn = cpu_to_be32(conn->stat_sn);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
hdr->r2tsn = cpu_to_be32(r2t->r2t_sn);
hdr->data_offset = cpu_to_be32(r2t->offset);
hdr->data_length = cpu_to_be32(r2t->xfer_len);
cmd->iov_misc[0].iov_base = cmd->pdu;
cmd->iov_misc[0].iov_len = ISCSI_HDR_LEN;
tx_size += ISCSI_HDR_LEN;
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
cmd->iov_misc[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 HeaderDigest for R2T"
" PDU 0x%08x\n", *header_digest);
}
pr_debug("Built %sR2T, ITT: 0x%08x, TTT: 0x%08x, StatSN:"
" 0x%08x, R2TSN: 0x%08x, Offset: %u, DDTL: %u, CID: %hu\n",
(!r2t->recovery_r2t) ? "" : "Recovery ", cmd->init_task_tag,
r2t->targ_xfer_tag, ntohl(hdr->statsn), r2t->r2t_sn,
r2t->offset, r2t->xfer_len, conn->cid);
cmd->iov_misc_count = 1;
cmd->tx_size = tx_size;
spin_lock_bh(&cmd->r2t_lock);
r2t->sent_r2t = 1;
spin_unlock_bh(&cmd->r2t_lock);
return 0;
}
/*
* type 0: Normal Operation.
* type 1: Called from Storage Transport.
* type 2: Called from iscsi_task_reassign_complete_write() for
* connection recovery.
*/
int iscsit_build_r2ts_for_cmd(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn,
int type)
{
int first_r2t = 1;
u32 offset = 0, xfer_len = 0;
spin_lock_bh(&cmd->r2t_lock);
if (cmd->cmd_flags & ICF_SENT_LAST_R2T) {
spin_unlock_bh(&cmd->r2t_lock);
return 0;
}
if (conn->sess->sess_ops->DataSequenceInOrder && (type != 2))
if (cmd->r2t_offset < cmd->write_data_done)
cmd->r2t_offset = cmd->write_data_done;
while (cmd->outstanding_r2ts < conn->sess->sess_ops->MaxOutstandingR2T) {
if (conn->sess->sess_ops->DataSequenceInOrder) {
offset = cmd->r2t_offset;
if (first_r2t && (type == 2)) {
xfer_len = ((offset +
(conn->sess->sess_ops->MaxBurstLength -
cmd->next_burst_len) >
cmd->data_length) ?
(cmd->data_length - offset) :
(conn->sess->sess_ops->MaxBurstLength -
cmd->next_burst_len));
} else {
xfer_len = ((offset +
conn->sess->sess_ops->MaxBurstLength) >
cmd->data_length) ?
(cmd->data_length - offset) :
conn->sess->sess_ops->MaxBurstLength;
}
cmd->r2t_offset += xfer_len;
if (cmd->r2t_offset == cmd->data_length)
cmd->cmd_flags |= ICF_SENT_LAST_R2T;
} else {
struct iscsi_seq *seq;
seq = iscsit_get_seq_holder_for_r2t(cmd);
if (!seq) {
spin_unlock_bh(&cmd->r2t_lock);
return -1;
}
offset = seq->offset;
xfer_len = seq->xfer_len;
if (cmd->seq_send_order == cmd->seq_count)
cmd->cmd_flags |= ICF_SENT_LAST_R2T;
}
cmd->outstanding_r2ts++;
first_r2t = 0;
if (iscsit_add_r2t_to_list(cmd, offset, xfer_len, 0, 0) < 0) {
spin_unlock_bh(&cmd->r2t_lock);
return -1;
}
if (cmd->cmd_flags & ICF_SENT_LAST_R2T)
break;
}
spin_unlock_bh(&cmd->r2t_lock);
return 0;
}
static int iscsit_send_status(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
u8 iov_count = 0, recovery;
u32 padding = 0, tx_size = 0;
struct iscsi_scsi_rsp *hdr;
struct kvec *iov;
recovery = (cmd->i_state != ISTATE_SEND_STATUS);
if (!recovery)
cmd->stat_sn = conn->stat_sn++;
spin_lock_bh(&conn->sess->session_stats_lock);
conn->sess->rsp_pdus++;
spin_unlock_bh(&conn->sess->session_stats_lock);
hdr = (struct iscsi_scsi_rsp *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_SCSI_CMD_RSP;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) {
hdr->flags |= ISCSI_FLAG_CMD_OVERFLOW;
hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
} else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) {
hdr->flags |= ISCSI_FLAG_CMD_UNDERFLOW;
hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
hdr->response = cmd->iscsi_response;
hdr->cmd_status = cmd->se_cmd.scsi_status;
hdr->itt = cpu_to_be32(cmd->init_task_tag);
hdr->statsn = cpu_to_be32(cmd->stat_sn);
iscsit_increment_maxcmdsn(cmd, conn->sess);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
iov = &cmd->iov_misc[0];
iov[iov_count].iov_base = cmd->pdu;
iov[iov_count++].iov_len = ISCSI_HDR_LEN;
tx_size += ISCSI_HDR_LEN;
/*
* Attach SENSE DATA payload to iSCSI Response PDU
*/
if (cmd->se_cmd.sense_buffer &&
((cmd->se_cmd.se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) ||
(cmd->se_cmd.se_cmd_flags & SCF_EMULATED_TASK_SENSE))) {
padding = -(cmd->se_cmd.scsi_sense_length) & 3;
hton24(hdr->dlength, cmd->se_cmd.scsi_sense_length);
iov[iov_count].iov_base = cmd->se_cmd.sense_buffer;
iov[iov_count++].iov_len =
(cmd->se_cmd.scsi_sense_length + padding);
tx_size += cmd->se_cmd.scsi_sense_length;
if (padding) {
memset(cmd->se_cmd.sense_buffer +
cmd->se_cmd.scsi_sense_length, 0, padding);
tx_size += padding;
pr_debug("Adding %u bytes of padding to"
" SENSE.\n", padding);
}
if (conn->conn_ops->DataDigest) {
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
cmd->se_cmd.sense_buffer,
(cmd->se_cmd.scsi_sense_length + padding),
0, NULL, (u8 *)&cmd->data_crc);
iov[iov_count].iov_base = &cmd->data_crc;
iov[iov_count++].iov_len = ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 DataDigest for"
" SENSE, %u bytes CRC 0x%08x\n",
(cmd->se_cmd.scsi_sense_length + padding),
cmd->data_crc);
}
pr_debug("Attaching SENSE DATA: %u bytes to iSCSI"
" Response PDU\n",
cmd->se_cmd.scsi_sense_length);
}
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
iov[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 HeaderDigest for Response"
" PDU 0x%08x\n", *header_digest);
}
cmd->iov_misc_count = iov_count;
cmd->tx_size = tx_size;
pr_debug("Built %sSCSI Response, ITT: 0x%08x, StatSN: 0x%08x,"
" Response: 0x%02x, SAM Status: 0x%02x, CID: %hu\n",
(!recovery) ? "" : "Recovery ", cmd->init_task_tag,
cmd->stat_sn, 0x00, cmd->se_cmd.scsi_status, conn->cid);
return 0;
}
static u8 iscsit_convert_tcm_tmr_rsp(struct se_tmr_req *se_tmr)
{
switch (se_tmr->response) {
case TMR_FUNCTION_COMPLETE:
return ISCSI_TMF_RSP_COMPLETE;
case TMR_TASK_DOES_NOT_EXIST:
return ISCSI_TMF_RSP_NO_TASK;
case TMR_LUN_DOES_NOT_EXIST:
return ISCSI_TMF_RSP_NO_LUN;
case TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED:
return ISCSI_TMF_RSP_NOT_SUPPORTED;
case TMR_FUNCTION_AUTHORIZATION_FAILED:
return ISCSI_TMF_RSP_AUTH_FAILED;
case TMR_FUNCTION_REJECTED:
default:
return ISCSI_TMF_RSP_REJECTED;
}
}
static int iscsit_send_task_mgt_rsp(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
struct se_tmr_req *se_tmr = cmd->se_cmd.se_tmr_req;
struct iscsi_tm_rsp *hdr;
u32 tx_size = 0;
hdr = (struct iscsi_tm_rsp *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP;
hdr->flags = ISCSI_FLAG_CMD_FINAL;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
hdr->response = iscsit_convert_tcm_tmr_rsp(se_tmr);
hdr->itt = cpu_to_be32(cmd->init_task_tag);
cmd->stat_sn = conn->stat_sn++;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
iscsit_increment_maxcmdsn(cmd, conn->sess);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
cmd->iov_misc[0].iov_base = cmd->pdu;
cmd->iov_misc[0].iov_len = ISCSI_HDR_LEN;
tx_size += ISCSI_HDR_LEN;
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
cmd->iov_misc[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 HeaderDigest for Task"
" Mgmt Response PDU 0x%08x\n", *header_digest);
}
cmd->iov_misc_count = 1;
cmd->tx_size = tx_size;
pr_debug("Built Task Management Response ITT: 0x%08x,"
" StatSN: 0x%08x, Response: 0x%02x, CID: %hu\n",
cmd->init_task_tag, cmd->stat_sn, hdr->response, conn->cid);
return 0;
}
static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd)
{
char *payload = NULL;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_portal_group *tpg;
struct iscsi_tiqn *tiqn;
struct iscsi_tpg_np *tpg_np;
int buffer_len, end_of_buf = 0, len = 0, payload_len = 0;
unsigned char buf[256];
buffer_len = (conn->conn_ops->MaxRecvDataSegmentLength > 32768) ?
32768 : conn->conn_ops->MaxRecvDataSegmentLength;
memset(buf, 0, 256);
payload = kzalloc(buffer_len, GFP_KERNEL);
if (!payload) {
pr_err("Unable to allocate memory for sendtargets"
" response.\n");
return -ENOMEM;
}
spin_lock(&tiqn_lock);
list_for_each_entry(tiqn, &g_tiqn_list, tiqn_list) {
len = sprintf(buf, "TargetName=%s", tiqn->tiqn);
len += 1;
if ((len + payload_len) > buffer_len) {
spin_unlock(&tiqn->tiqn_tpg_lock);
end_of_buf = 1;
goto eob;
}
memcpy((void *)payload + payload_len, buf, len);
payload_len += len;
spin_lock(&tiqn->tiqn_tpg_lock);
list_for_each_entry(tpg, &tiqn->tiqn_tpg_list, tpg_list) {
spin_lock(&tpg->tpg_state_lock);
if ((tpg->tpg_state == TPG_STATE_FREE) ||
(tpg->tpg_state == TPG_STATE_INACTIVE)) {
spin_unlock(&tpg->tpg_state_lock);
continue;
}
spin_unlock(&tpg->tpg_state_lock);
spin_lock(&tpg->tpg_np_lock);
list_for_each_entry(tpg_np, &tpg->tpg_gnp_list,
tpg_np_list) {
len = sprintf(buf, "TargetAddress="
"%s%s%s:%hu,%hu",
(tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ?
"[" : "", tpg_np->tpg_np->np_ip,
(tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ?
"]" : "", tpg_np->tpg_np->np_port,
tpg->tpgt);
len += 1;
if ((len + payload_len) > buffer_len) {
spin_unlock(&tpg->tpg_np_lock);
spin_unlock(&tiqn->tiqn_tpg_lock);
end_of_buf = 1;
goto eob;
}
memcpy((void *)payload + payload_len, buf, len);
payload_len += len;
}
spin_unlock(&tpg->tpg_np_lock);
}
spin_unlock(&tiqn->tiqn_tpg_lock);
eob:
if (end_of_buf)
break;
}
spin_unlock(&tiqn_lock);
cmd->buf_ptr = payload;
return payload_len;
}
/*
* FIXME: Add support for F_BIT and C_BIT when the length is longer than
* MaxRecvDataSegmentLength.
*/
static int iscsit_send_text_rsp(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
struct iscsi_text_rsp *hdr;
struct kvec *iov;
u32 padding = 0, tx_size = 0;
int text_length, iov_count = 0;
text_length = iscsit_build_sendtargets_response(cmd);
if (text_length < 0)
return text_length;
padding = ((-text_length) & 3);
if (padding != 0) {
memset(cmd->buf_ptr + text_length, 0, padding);
pr_debug("Attaching %u additional bytes for"
" padding.\n", padding);
}
hdr = (struct iscsi_text_rsp *) cmd->pdu;
memset(hdr, 0, ISCSI_HDR_LEN);
hdr->opcode = ISCSI_OP_TEXT_RSP;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hton24(hdr->dlength, text_length);
hdr->itt = cpu_to_be32(cmd->init_task_tag);
hdr->ttt = cpu_to_be32(cmd->targ_xfer_tag);
cmd->stat_sn = conn->stat_sn++;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
iscsit_increment_maxcmdsn(cmd, conn->sess);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
iov = &cmd->iov_misc[0];
iov[iov_count].iov_base = cmd->pdu;
iov[iov_count++].iov_len = ISCSI_HDR_LEN;
iov[iov_count].iov_base = cmd->buf_ptr;
iov[iov_count++].iov_len = text_length + padding;
tx_size += (ISCSI_HDR_LEN + text_length + padding);
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
iov[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 HeaderDigest for"
" Text Response PDU 0x%08x\n", *header_digest);
}
if (conn->conn_ops->DataDigest) {
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
cmd->buf_ptr, (text_length + padding),
0, NULL, (u8 *)&cmd->data_crc);
iov[iov_count].iov_base = &cmd->data_crc;
iov[iov_count++].iov_len = ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching DataDigest for %u bytes of text"
" data, CRC 0x%08x\n", (text_length + padding),
cmd->data_crc);
}
cmd->iov_misc_count = iov_count;
cmd->tx_size = tx_size;
pr_debug("Built Text Response: ITT: 0x%08x, StatSN: 0x%08x,"
" Length: %u, CID: %hu\n", cmd->init_task_tag, cmd->stat_sn,
text_length, conn->cid);
return 0;
}
static int iscsit_send_reject(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
u32 iov_count = 0, tx_size = 0;
struct iscsi_reject *hdr;
struct kvec *iov;
hdr = (struct iscsi_reject *) cmd->pdu;
hdr->opcode = ISCSI_OP_REJECT;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hton24(hdr->dlength, ISCSI_HDR_LEN);
cmd->stat_sn = conn->stat_sn++;
hdr->statsn = cpu_to_be32(cmd->stat_sn);
hdr->exp_cmdsn = cpu_to_be32(conn->sess->exp_cmd_sn);
hdr->max_cmdsn = cpu_to_be32(conn->sess->max_cmd_sn);
iov = &cmd->iov_misc[0];
iov[iov_count].iov_base = cmd->pdu;
iov[iov_count++].iov_len = ISCSI_HDR_LEN;
iov[iov_count].iov_base = cmd->buf_ptr;
iov[iov_count++].iov_len = ISCSI_HDR_LEN;
tx_size = (ISCSI_HDR_LEN + ISCSI_HDR_LEN);
if (conn->conn_ops->HeaderDigest) {
u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN];
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)hdr, ISCSI_HDR_LEN,
0, NULL, (u8 *)header_digest);
iov[0].iov_len += ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 HeaderDigest for"
" REJECT PDU 0x%08x\n", *header_digest);
}
if (conn->conn_ops->DataDigest) {
iscsit_do_crypto_hash_buf(&conn->conn_tx_hash,
(unsigned char *)cmd->buf_ptr, ISCSI_HDR_LEN,
0, NULL, (u8 *)&cmd->data_crc);
iov[iov_count].iov_base = &cmd->data_crc;
iov[iov_count++].iov_len = ISCSI_CRC_LEN;
tx_size += ISCSI_CRC_LEN;
pr_debug("Attaching CRC32 DataDigest for REJECT"
" PDU 0x%08x\n", cmd->data_crc);
}
cmd->iov_misc_count = iov_count;
cmd->tx_size = tx_size;
pr_debug("Built Reject PDU StatSN: 0x%08x, Reason: 0x%02x,"
" CID: %hu\n", ntohl(hdr->statsn), hdr->reason, conn->cid);
return 0;
}
static void iscsit_tx_thread_wait_for_tcp(struct iscsi_conn *conn)
{
if ((conn->sock->sk->sk_shutdown & SEND_SHUTDOWN) ||
(conn->sock->sk->sk_shutdown & RCV_SHUTDOWN)) {
wait_for_completion_interruptible_timeout(
&conn->tx_half_close_comp,
ISCSI_TX_THREAD_TCP_TIMEOUT * HZ);
}
}
#ifdef CONFIG_SMP
void iscsit_thread_get_cpumask(struct iscsi_conn *conn)
{
struct iscsi_thread_set *ts = conn->thread_set;
int ord, cpu;
/*
* thread_id is assigned from iscsit_global->ts_bitmap from
* within iscsi_thread_set.c:iscsi_allocate_thread_sets()
*
* Here we use thread_id to determine which CPU that this
* iSCSI connection's iscsi_thread_set will be scheduled to
* execute upon.
*/
ord = ts->thread_id % cpumask_weight(cpu_online_mask);
#if 0
pr_debug(">>>>>>>>>>>>>>>>>>>> Generated ord: %d from"
" thread_id: %d\n", ord, ts->thread_id);
#endif
for_each_online_cpu(cpu) {
if (ord-- == 0) {
cpumask_set_cpu(cpu, conn->conn_cpumask);
return;
}
}
/*
* This should never be reached..
*/
dump_stack();
cpumask_setall(conn->conn_cpumask);
}
static inline void iscsit_thread_check_cpumask(
struct iscsi_conn *conn,
struct task_struct *p,
int mode)
{
char buf[128];
/*
* mode == 1 signals iscsi_target_tx_thread() usage.
* mode == 0 signals iscsi_target_rx_thread() usage.
*/
if (mode == 1) {
if (!conn->conn_tx_reset_cpumask)
return;
conn->conn_tx_reset_cpumask = 0;
} else {
if (!conn->conn_rx_reset_cpumask)
return;
conn->conn_rx_reset_cpumask = 0;
}
/*
* Update the CPU mask for this single kthread so that
* both TX and RX kthreads are scheduled to run on the
* same CPU.
*/
memset(buf, 0, 128);
cpumask_scnprintf(buf, 128, conn->conn_cpumask);
#if 0
pr_debug(">>>>>>>>>>>>>> Calling set_cpus_allowed_ptr():"
" %s for %s\n", buf, p->comm);
#endif
set_cpus_allowed_ptr(p, conn->conn_cpumask);
}
#else
void iscsit_thread_get_cpumask(struct iscsi_conn *conn)
{
return;
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#define iscsit_thread_check_cpumask(X, Y, Z) ({})
#endif /* CONFIG_SMP */
int iscsi_target_tx_thread(void *arg)
{
u8 state;
int eodr = 0;
int ret = 0;
int sent_status = 0;
int use_misc = 0;
int map_sg = 0;
struct iscsi_cmd *cmd = NULL;
struct iscsi_conn *conn;
struct iscsi_queue_req *qr = NULL;
struct se_cmd *se_cmd;
struct iscsi_thread_set *ts = (struct iscsi_thread_set *)arg;
/*
* Allow ourselves to be interrupted by SIGINT so that a
* connection recovery / failure event can be triggered externally.
*/
allow_signal(SIGINT);
restart:
conn = iscsi_tx_thread_pre_handler(ts);
if (!conn)
goto out;
eodr = map_sg = ret = sent_status = use_misc = 0;
while (!kthread_should_stop()) {
/*
* Ensure that both TX and RX per connection kthreads
* are scheduled to run on the same CPU.
*/
iscsit_thread_check_cpumask(conn, current, 1);
schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
if ((ts->status == ISCSI_THREAD_SET_RESET) ||
signal_pending(current))
goto transport_err;
get_immediate:
qr = iscsit_get_cmd_from_immediate_queue(conn);
if (qr) {
atomic_set(&conn->check_immediate_queue, 0);
cmd = qr->cmd;
state = qr->state;
kmem_cache_free(lio_qr_cache, qr);
spin_lock_bh(&cmd->istate_lock);
switch (state) {
case ISTATE_SEND_R2T:
spin_unlock_bh(&cmd->istate_lock);
ret = iscsit_send_r2t(cmd, conn);
break;
case ISTATE_REMOVE:
spin_unlock_bh(&cmd->istate_lock);
if (cmd->data_direction == DMA_TO_DEVICE)
iscsit_stop_dataout_timer(cmd);
spin_lock_bh(&conn->cmd_lock);
list_del(&cmd->i_list);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_cmd(cmd);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
goto get_immediate;
case ISTATE_SEND_NOPIN_WANT_RESPONSE:
spin_unlock_bh(&cmd->istate_lock);
iscsit_mod_nopin_response_timer(conn);
ret = iscsit_send_unsolicited_nopin(cmd,
conn, 1);
break;
case ISTATE_SEND_NOPIN_NO_RESPONSE:
spin_unlock_bh(&cmd->istate_lock);
ret = iscsit_send_unsolicited_nopin(cmd,
conn, 0);
break;
default:
pr_err("Unknown Opcode: 0x%02x ITT:"
" 0x%08x, i_state: %d on CID: %hu\n",
cmd->iscsi_opcode, cmd->init_task_tag, state,
conn->cid);
spin_unlock_bh(&cmd->istate_lock);
goto transport_err;
}
if (ret < 0) {
conn->tx_immediate_queue = 0;
goto transport_err;
}
if (iscsit_send_tx_data(cmd, conn, 1) < 0) {
conn->tx_immediate_queue = 0;
iscsit_tx_thread_wait_for_tcp(conn);
goto transport_err;
}
spin_lock_bh(&cmd->istate_lock);
switch (state) {
case ISTATE_SEND_R2T:
spin_unlock_bh(&cmd->istate_lock);
spin_lock_bh(&cmd->dataout_timeout_lock);
iscsit_start_dataout_timer(cmd, conn);
spin_unlock_bh(&cmd->dataout_timeout_lock);
break;
case ISTATE_SEND_NOPIN_WANT_RESPONSE:
cmd->i_state = ISTATE_SENT_NOPIN_WANT_RESPONSE;
spin_unlock_bh(&cmd->istate_lock);
break;
case ISTATE_SEND_NOPIN_NO_RESPONSE:
cmd->i_state = ISTATE_SENT_STATUS;
spin_unlock_bh(&cmd->istate_lock);
break;
default:
pr_err("Unknown Opcode: 0x%02x ITT:"
" 0x%08x, i_state: %d on CID: %hu\n",
cmd->iscsi_opcode, cmd->init_task_tag,
state, conn->cid);
spin_unlock_bh(&cmd->istate_lock);
goto transport_err;
}
goto get_immediate;
} else
conn->tx_immediate_queue = 0;
get_response:
qr = iscsit_get_cmd_from_response_queue(conn);
if (qr) {
cmd = qr->cmd;
state = qr->state;
kmem_cache_free(lio_qr_cache, qr);
spin_lock_bh(&cmd->istate_lock);
check_rsp_state:
switch (state) {
case ISTATE_SEND_DATAIN:
spin_unlock_bh(&cmd->istate_lock);
ret = iscsit_send_data_in(cmd, conn,
&eodr);
map_sg = 1;
break;
case ISTATE_SEND_STATUS:
case ISTATE_SEND_STATUS_RECOVERY:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_status(cmd, conn);
break;
case ISTATE_SEND_LOGOUTRSP:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_logout_response(cmd, conn);
break;
case ISTATE_SEND_ASYNCMSG:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_conn_drop_async_message(
cmd, conn);
break;
case ISTATE_SEND_NOPIN:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_nopin_response(cmd, conn);
break;
case ISTATE_SEND_REJECT:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_reject(cmd, conn);
break;
case ISTATE_SEND_TASKMGTRSP:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_task_mgt_rsp(cmd, conn);
if (ret != 0)
break;
ret = iscsit_tmr_post_handler(cmd, conn);
if (ret != 0)
iscsit_fall_back_to_erl0(conn->sess);
break;
case ISTATE_SEND_TEXTRSP:
spin_unlock_bh(&cmd->istate_lock);
use_misc = 1;
ret = iscsit_send_text_rsp(cmd, conn);
break;
default:
pr_err("Unknown Opcode: 0x%02x ITT:"
" 0x%08x, i_state: %d on CID: %hu\n",
cmd->iscsi_opcode, cmd->init_task_tag,
state, conn->cid);
spin_unlock_bh(&cmd->istate_lock);
goto transport_err;
}
if (ret < 0) {
conn->tx_response_queue = 0;
goto transport_err;
}
se_cmd = &cmd->se_cmd;
if (map_sg && !conn->conn_ops->IFMarker) {
if (iscsit_fe_sendpage_sg(cmd, conn) < 0) {
conn->tx_response_queue = 0;
iscsit_tx_thread_wait_for_tcp(conn);
iscsit_unmap_iovec(cmd);
goto transport_err;
}
} else {
if (iscsit_send_tx_data(cmd, conn, use_misc) < 0) {
conn->tx_response_queue = 0;
iscsit_tx_thread_wait_for_tcp(conn);
iscsit_unmap_iovec(cmd);
goto transport_err;
}
}
map_sg = 0;
iscsit_unmap_iovec(cmd);
spin_lock_bh(&cmd->istate_lock);
switch (state) {
case ISTATE_SEND_DATAIN:
if (!eodr)
goto check_rsp_state;
if (eodr == 1) {
cmd->i_state = ISTATE_SENT_LAST_DATAIN;
sent_status = 1;
eodr = use_misc = 0;
} else if (eodr == 2) {
cmd->i_state = state =
ISTATE_SEND_STATUS;
sent_status = 0;
eodr = use_misc = 0;
goto check_rsp_state;
}
break;
case ISTATE_SEND_STATUS:
use_misc = 0;
sent_status = 1;
break;
case ISTATE_SEND_ASYNCMSG:
case ISTATE_SEND_NOPIN:
case ISTATE_SEND_STATUS_RECOVERY:
case ISTATE_SEND_TEXTRSP:
use_misc = 0;
sent_status = 1;
break;
case ISTATE_SEND_REJECT:
use_misc = 0;
if (cmd->cmd_flags & ICF_REJECT_FAIL_CONN) {
cmd->cmd_flags &= ~ICF_REJECT_FAIL_CONN;
spin_unlock_bh(&cmd->istate_lock);
complete(&cmd->reject_comp);
goto transport_err;
}
complete(&cmd->reject_comp);
break;
case ISTATE_SEND_TASKMGTRSP:
use_misc = 0;
sent_status = 1;
break;
case ISTATE_SEND_LOGOUTRSP:
spin_unlock_bh(&cmd->istate_lock);
if (!iscsit_logout_post_handler(cmd, conn))
goto restart;
spin_lock_bh(&cmd->istate_lock);
use_misc = 0;
sent_status = 1;
break;
default:
pr_err("Unknown Opcode: 0x%02x ITT:"
" 0x%08x, i_state: %d on CID: %hu\n",
cmd->iscsi_opcode, cmd->init_task_tag,
cmd->i_state, conn->cid);
spin_unlock_bh(&cmd->istate_lock);
goto transport_err;
}
if (sent_status) {
cmd->i_state = ISTATE_SENT_STATUS;
sent_status = 0;
}
spin_unlock_bh(&cmd->istate_lock);
if (atomic_read(&conn->check_immediate_queue))
goto get_immediate;
goto get_response;
} else
conn->tx_response_queue = 0;
}
transport_err:
iscsit_take_action_for_connection_exit(conn);
goto restart;
out:
return 0;
}
int iscsi_target_rx_thread(void *arg)
{
int ret;
u8 buffer[ISCSI_HDR_LEN], opcode;
u32 checksum = 0, digest = 0;
struct iscsi_conn *conn = NULL;
struct iscsi_thread_set *ts = (struct iscsi_thread_set *)arg;
struct kvec iov;
/*
* Allow ourselves to be interrupted by SIGINT so that a
* connection recovery / failure event can be triggered externally.
*/
allow_signal(SIGINT);
restart:
conn = iscsi_rx_thread_pre_handler(ts);
if (!conn)
goto out;
while (!kthread_should_stop()) {
/*
* Ensure that both TX and RX per connection kthreads
* are scheduled to run on the same CPU.
*/
iscsit_thread_check_cpumask(conn, current, 0);
memset(buffer, 0, ISCSI_HDR_LEN);
memset(&iov, 0, sizeof(struct kvec));
iov.iov_base = buffer;
iov.iov_len = ISCSI_HDR_LEN;
ret = rx_data(conn, &iov, 1, ISCSI_HDR_LEN);
if (ret != ISCSI_HDR_LEN) {
iscsit_rx_thread_wait_for_tcp(conn);
goto transport_err;
}
/*
* Set conn->bad_hdr for use with REJECT PDUs.
*/
memcpy(&conn->bad_hdr, &buffer, ISCSI_HDR_LEN);
if (conn->conn_ops->HeaderDigest) {
iov.iov_base = &digest;
iov.iov_len = ISCSI_CRC_LEN;
ret = rx_data(conn, &iov, 1, ISCSI_CRC_LEN);
if (ret != ISCSI_CRC_LEN) {
iscsit_rx_thread_wait_for_tcp(conn);
goto transport_err;
}
iscsit_do_crypto_hash_buf(&conn->conn_rx_hash,
buffer, ISCSI_HDR_LEN,
0, NULL, (u8 *)&checksum);
if (digest != checksum) {
pr_err("HeaderDigest CRC32C failed,"
" received 0x%08x, computed 0x%08x\n",
digest, checksum);
/*
* Set the PDU to 0xff so it will intentionally
* hit default in the switch below.
*/
memset(buffer, 0xff, ISCSI_HDR_LEN);
spin_lock_bh(&conn->sess->session_stats_lock);
conn->sess->conn_digest_errors++;
spin_unlock_bh(&conn->sess->session_stats_lock);
} else {
pr_debug("Got HeaderDigest CRC32C"
" 0x%08x\n", checksum);
}
}
if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT)
goto transport_err;
opcode = buffer[0] & ISCSI_OPCODE_MASK;
if (conn->sess->sess_ops->SessionType &&
((!(opcode & ISCSI_OP_TEXT)) ||
(!(opcode & ISCSI_OP_LOGOUT)))) {
pr_err("Received illegal iSCSI Opcode: 0x%02x"
" while in Discovery Session, rejecting.\n", opcode);
iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
buffer, conn);
goto transport_err;
}
switch (opcode) {
case ISCSI_OP_SCSI_CMD:
if (iscsit_handle_scsi_cmd(conn, buffer) < 0)
goto transport_err;
break;
case ISCSI_OP_SCSI_DATA_OUT:
if (iscsit_handle_data_out(conn, buffer) < 0)
goto transport_err;
break;
case ISCSI_OP_NOOP_OUT:
if (iscsit_handle_nop_out(conn, buffer) < 0)
goto transport_err;
break;
case ISCSI_OP_SCSI_TMFUNC:
if (iscsit_handle_task_mgt_cmd(conn, buffer) < 0)
goto transport_err;
break;
case ISCSI_OP_TEXT:
if (iscsit_handle_text_cmd(conn, buffer) < 0)
goto transport_err;
break;
case ISCSI_OP_LOGOUT:
ret = iscsit_handle_logout_cmd(conn, buffer);
if (ret > 0) {
wait_for_completion_timeout(&conn->conn_logout_comp,
SECONDS_FOR_LOGOUT_COMP * HZ);
goto transport_err;
} else if (ret < 0)
goto transport_err;
break;
case ISCSI_OP_SNACK:
if (iscsit_handle_snack(conn, buffer) < 0)
goto transport_err;
break;
default:
pr_err("Got unknown iSCSI OpCode: 0x%02x\n",
opcode);
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Cannot recover from unknown"
" opcode while ERL=0, closing iSCSI connection"
".\n");
goto transport_err;
}
if (!conn->conn_ops->OFMarker) {
pr_err("Unable to recover from unknown"
" opcode while OFMarker=No, closing iSCSI"
" connection.\n");
goto transport_err;
}
if (iscsit_recover_from_unknown_opcode(conn) < 0) {
pr_err("Unable to recover from unknown"
" opcode, closing iSCSI connection.\n");
goto transport_err;
}
break;
}
}
transport_err:
if (!signal_pending(current))
atomic_set(&conn->transport_failed, 1);
iscsit_take_action_for_connection_exit(conn);
goto restart;
out:
return 0;
}
static void iscsit_release_commands_from_conn(struct iscsi_conn *conn)
{
struct iscsi_cmd *cmd = NULL, *cmd_tmp = NULL;
struct iscsi_session *sess = conn->sess;
/*
* We expect this function to only ever be called from either RX or TX
* thread context via iscsit_close_connection() once the other context
* has been reset -> returned sleeping pre-handler state.
*/
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp, &conn->conn_cmd_list, i_list) {
list_del(&cmd->i_list);
spin_unlock_bh(&conn->cmd_lock);
iscsit_increment_maxcmdsn(cmd, sess);
iscsit_free_cmd(cmd);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock_bh(&conn->cmd_lock);
}
spin_unlock_bh(&conn->cmd_lock);
}
static void iscsit_stop_timers_for_cmds(
struct iscsi_conn *conn)
{
struct iscsi_cmd *cmd;
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry(cmd, &conn->conn_cmd_list, i_list) {
if (cmd->data_direction == DMA_TO_DEVICE)
iscsit_stop_dataout_timer(cmd);
}
spin_unlock_bh(&conn->cmd_lock);
}
int iscsit_close_connection(
struct iscsi_conn *conn)
{
int conn_logout = (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT);
struct iscsi_session *sess = conn->sess;
pr_debug("Closing iSCSI connection CID %hu on SID:"
" %u\n", conn->cid, sess->sid);
/*
* Always up conn_logout_comp just in case the RX Thread is sleeping
* and the logout response never got sent because the connection
* failed.
*/
complete(&conn->conn_logout_comp);
iscsi_release_thread_set(conn);
iscsit_stop_timers_for_cmds(conn);
iscsit_stop_nopin_response_timer(conn);
iscsit_stop_nopin_timer(conn);
iscsit_free_queue_reqs_for_conn(conn);
/*
* During Connection recovery drop unacknowledged out of order
* commands for this connection, and prepare the other commands
* for realligence.
*
* During normal operation clear the out of order commands (but
* do not free the struct iscsi_ooo_cmdsn's) and release all
* struct iscsi_cmds.
*/
if (atomic_read(&conn->connection_recovery)) {
iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(conn);
iscsit_prepare_cmds_for_realligance(conn);
} else {
iscsit_clear_ooo_cmdsns_for_conn(conn);
iscsit_release_commands_from_conn(conn);
}
/*
* Handle decrementing session or connection usage count if
* a logout response was not able to be sent because the
* connection failed. Fall back to Session Recovery here.
*/
if (atomic_read(&conn->conn_logout_remove)) {
if (conn->conn_logout_reason == ISCSI_LOGOUT_REASON_CLOSE_SESSION) {
iscsit_dec_conn_usage_count(conn);
iscsit_dec_session_usage_count(sess);
}
if (conn->conn_logout_reason == ISCSI_LOGOUT_REASON_CLOSE_CONNECTION)
iscsit_dec_conn_usage_count(conn);
atomic_set(&conn->conn_logout_remove, 0);
atomic_set(&sess->session_reinstatement, 0);
atomic_set(&sess->session_fall_back_to_erl0, 1);
}
spin_lock_bh(&sess->conn_lock);
list_del(&conn->conn_list);
/*
* Attempt to let the Initiator know this connection failed by
* sending an Connection Dropped Async Message on another
* active connection.
*/
if (atomic_read(&conn->connection_recovery))
iscsit_build_conn_drop_async_message(conn);
spin_unlock_bh(&sess->conn_lock);
/*
* If connection reinstatement is being performed on this connection,
* up the connection reinstatement semaphore that is being blocked on
* in iscsit_cause_connection_reinstatement().
*/
spin_lock_bh(&conn->state_lock);
if (atomic_read(&conn->sleep_on_conn_wait_comp)) {
spin_unlock_bh(&conn->state_lock);
complete(&conn->conn_wait_comp);
wait_for_completion(&conn->conn_post_wait_comp);
spin_lock_bh(&conn->state_lock);
}
/*
* If connection reinstatement is being performed on this connection
* by receiving a REMOVECONNFORRECOVERY logout request, up the
* connection wait rcfr semaphore that is being blocked on
* an iscsit_connection_reinstatement_rcfr().
*/
if (atomic_read(&conn->connection_wait_rcfr)) {
spin_unlock_bh(&conn->state_lock);
complete(&conn->conn_wait_rcfr_comp);
wait_for_completion(&conn->conn_post_wait_comp);
spin_lock_bh(&conn->state_lock);
}
atomic_set(&conn->connection_reinstatement, 1);
spin_unlock_bh(&conn->state_lock);
/*
* If any other processes are accessing this connection pointer we
* must wait until they have completed.
*/
iscsit_check_conn_usage_count(conn);
if (conn->conn_rx_hash.tfm)
crypto_free_hash(conn->conn_rx_hash.tfm);
if (conn->conn_tx_hash.tfm)
crypto_free_hash(conn->conn_tx_hash.tfm);
if (conn->conn_cpumask)
free_cpumask_var(conn->conn_cpumask);
kfree(conn->conn_ops);
conn->conn_ops = NULL;
if (conn->sock) {
if (conn->conn_flags & CONNFLAG_SCTP_STRUCT_FILE) {
kfree(conn->sock->file);
conn->sock->file = NULL;
}
sock_release(conn->sock);
}
conn->thread_set = NULL;
pr_debug("Moving to TARG_CONN_STATE_FREE.\n");
conn->conn_state = TARG_CONN_STATE_FREE;
kfree(conn);
spin_lock_bh(&sess->conn_lock);
atomic_dec(&sess->nconn);
pr_debug("Decremented iSCSI connection count to %hu from node:"
" %s\n", atomic_read(&sess->nconn),
sess->sess_ops->InitiatorName);
/*
* Make sure that if one connection fails in an non ERL=2 iSCSI
* Session that they all fail.
*/
if ((sess->sess_ops->ErrorRecoveryLevel != 2) && !conn_logout &&
!atomic_read(&sess->session_logout))
atomic_set(&sess->session_fall_back_to_erl0, 1);
/*
* If this was not the last connection in the session, and we are
* performing session reinstatement or falling back to ERL=0, call
* iscsit_stop_session() without sleeping to shutdown the other
* active connections.
*/
if (atomic_read(&sess->nconn)) {
if (!atomic_read(&sess->session_reinstatement) &&
!atomic_read(&sess->session_fall_back_to_erl0)) {
spin_unlock_bh(&sess->conn_lock);
return 0;
}
if (!atomic_read(&sess->session_stop_active)) {
atomic_set(&sess->session_stop_active, 1);
spin_unlock_bh(&sess->conn_lock);
iscsit_stop_session(sess, 0, 0);
return 0;
}
spin_unlock_bh(&sess->conn_lock);
return 0;
}
/*
* If this was the last connection in the session and one of the
* following is occurring:
*
* Session Reinstatement is not being performed, and are falling back
* to ERL=0 call iscsit_close_session().
*
* Session Logout was requested. iscsit_close_session() will be called
* elsewhere.
*
* Session Continuation is not being performed, start the Time2Retain
* handler and check if sleep_on_sess_wait_sem is active.
*/
if (!atomic_read(&sess->session_reinstatement) &&
atomic_read(&sess->session_fall_back_to_erl0)) {
spin_unlock_bh(&sess->conn_lock);
iscsit_close_session(sess);
return 0;
} else if (atomic_read(&sess->session_logout)) {
pr_debug("Moving to TARG_SESS_STATE_FREE.\n");
sess->session_state = TARG_SESS_STATE_FREE;
spin_unlock_bh(&sess->conn_lock);
if (atomic_read(&sess->sleep_on_sess_wait_comp))
complete(&sess->session_wait_comp);
return 0;
} else {
pr_debug("Moving to TARG_SESS_STATE_FAILED.\n");
sess->session_state = TARG_SESS_STATE_FAILED;
if (!atomic_read(&sess->session_continuation)) {
spin_unlock_bh(&sess->conn_lock);
iscsit_start_time2retain_handler(sess);
} else
spin_unlock_bh(&sess->conn_lock);
if (atomic_read(&sess->sleep_on_sess_wait_comp))
complete(&sess->session_wait_comp);
return 0;
}
spin_unlock_bh(&sess->conn_lock);
return 0;
}
int iscsit_close_session(struct iscsi_session *sess)
{
struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
if (atomic_read(&sess->nconn)) {
pr_err("%d connection(s) still exist for iSCSI session"
" to %s\n", atomic_read(&sess->nconn),
sess->sess_ops->InitiatorName);
BUG();
}
spin_lock_bh(&se_tpg->session_lock);
atomic_set(&sess->session_logout, 1);
atomic_set(&sess->session_reinstatement, 1);
iscsit_stop_time2retain_timer(sess);
spin_unlock_bh(&se_tpg->session_lock);
/*
* transport_deregister_session_configfs() will clear the
* struct se_node_acl->nacl_sess pointer now as a iscsi_np process context
* can be setting it again with __transport_register_session() in
* iscsi_post_login_handler() again after the iscsit_stop_session()
* completes in iscsi_np context.
*/
transport_deregister_session_configfs(sess->se_sess);
/*
* If any other processes are accessing this session pointer we must
* wait until they have completed. If we are in an interrupt (the
* time2retain handler) and contain and active session usage count we
* restart the timer and exit.
*/
if (!in_interrupt()) {
if (iscsit_check_session_usage_count(sess) == 1)
iscsit_stop_session(sess, 1, 1);
} else {
if (iscsit_check_session_usage_count(sess) == 2) {
atomic_set(&sess->session_logout, 0);
iscsit_start_time2retain_handler(sess);
return 0;
}
}
transport_deregister_session(sess->se_sess);
if (sess->sess_ops->ErrorRecoveryLevel == 2)
iscsit_free_connection_recovery_entires(sess);
iscsit_free_all_ooo_cmdsns(sess);
spin_lock_bh(&se_tpg->session_lock);
pr_debug("Moving to TARG_SESS_STATE_FREE.\n");
sess->session_state = TARG_SESS_STATE_FREE;
pr_debug("Released iSCSI session from node: %s\n",
sess->sess_ops->InitiatorName);
tpg->nsessions--;
if (tpg->tpg_tiqn)
tpg->tpg_tiqn->tiqn_nsessions--;
pr_debug("Decremented number of active iSCSI Sessions on"
" iSCSI TPG: %hu to %u\n", tpg->tpgt, tpg->nsessions);
spin_lock(&sess_idr_lock);
idr_remove(&sess_idr, sess->session_index);
spin_unlock(&sess_idr_lock);
kfree(sess->sess_ops);
sess->sess_ops = NULL;
spin_unlock_bh(&se_tpg->session_lock);
kfree(sess);
return 0;
}
static void iscsit_logout_post_handler_closesession(
struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
iscsi_set_thread_clear(conn, ISCSI_CLEAR_TX_THREAD);
iscsi_set_thread_set_signal(conn, ISCSI_SIGNAL_TX_THREAD);
atomic_set(&conn->conn_logout_remove, 0);
complete(&conn->conn_logout_comp);
iscsit_dec_conn_usage_count(conn);
iscsit_stop_session(sess, 1, 1);
iscsit_dec_session_usage_count(sess);
iscsit_close_session(sess);
}
static void iscsit_logout_post_handler_samecid(
struct iscsi_conn *conn)
{
iscsi_set_thread_clear(conn, ISCSI_CLEAR_TX_THREAD);
iscsi_set_thread_set_signal(conn, ISCSI_SIGNAL_TX_THREAD);
atomic_set(&conn->conn_logout_remove, 0);
complete(&conn->conn_logout_comp);
iscsit_cause_connection_reinstatement(conn, 1);
iscsit_dec_conn_usage_count(conn);
}
static void iscsit_logout_post_handler_diffcid(
struct iscsi_conn *conn,
u16 cid)
{
struct iscsi_conn *l_conn;
struct iscsi_session *sess = conn->sess;
if (!sess)
return;
spin_lock_bh(&sess->conn_lock);
list_for_each_entry(l_conn, &sess->sess_conn_list, conn_list) {
if (l_conn->cid == cid) {
iscsit_inc_conn_usage_count(l_conn);
break;
}
}
spin_unlock_bh(&sess->conn_lock);
if (!l_conn)
return;
if (l_conn->sock)
l_conn->sock->ops->shutdown(l_conn->sock, RCV_SHUTDOWN);
spin_lock_bh(&l_conn->state_lock);
pr_debug("Moving to TARG_CONN_STATE_IN_LOGOUT.\n");
l_conn->conn_state = TARG_CONN_STATE_IN_LOGOUT;
spin_unlock_bh(&l_conn->state_lock);
iscsit_cause_connection_reinstatement(l_conn, 1);
iscsit_dec_conn_usage_count(l_conn);
}
/*
* Return of 0 causes the TX thread to restart.
*/
static int iscsit_logout_post_handler(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
int ret = 0;
switch (cmd->logout_reason) {
case ISCSI_LOGOUT_REASON_CLOSE_SESSION:
switch (cmd->logout_response) {
case ISCSI_LOGOUT_SUCCESS:
case ISCSI_LOGOUT_CLEANUP_FAILED:
default:
iscsit_logout_post_handler_closesession(conn);
break;
}
ret = 0;
break;
case ISCSI_LOGOUT_REASON_CLOSE_CONNECTION:
if (conn->cid == cmd->logout_cid) {
switch (cmd->logout_response) {
case ISCSI_LOGOUT_SUCCESS:
case ISCSI_LOGOUT_CLEANUP_FAILED:
default:
iscsit_logout_post_handler_samecid(conn);
break;
}
ret = 0;
} else {
switch (cmd->logout_response) {
case ISCSI_LOGOUT_SUCCESS:
iscsit_logout_post_handler_diffcid(conn,
cmd->logout_cid);
break;
case ISCSI_LOGOUT_CID_NOT_FOUND:
case ISCSI_LOGOUT_CLEANUP_FAILED:
default:
break;
}
ret = 1;
}
break;
case ISCSI_LOGOUT_REASON_RECOVERY:
switch (cmd->logout_response) {
case ISCSI_LOGOUT_SUCCESS:
case ISCSI_LOGOUT_CID_NOT_FOUND:
case ISCSI_LOGOUT_RECOVERY_UNSUPPORTED:
case ISCSI_LOGOUT_CLEANUP_FAILED:
default:
break;
}
ret = 1;
break;
default:
break;
}
return ret;
}
void iscsit_fail_session(struct iscsi_session *sess)
{
struct iscsi_conn *conn;
spin_lock_bh(&sess->conn_lock);
list_for_each_entry(conn, &sess->sess_conn_list, conn_list) {
pr_debug("Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n");
conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT;
}
spin_unlock_bh(&sess->conn_lock);
pr_debug("Moving to TARG_SESS_STATE_FAILED.\n");
sess->session_state = TARG_SESS_STATE_FAILED;
}
int iscsit_free_session(struct iscsi_session *sess)
{
u16 conn_count = atomic_read(&sess->nconn);
struct iscsi_conn *conn, *conn_tmp = NULL;
int is_last;
spin_lock_bh(&sess->conn_lock);
atomic_set(&sess->sleep_on_sess_wait_comp, 1);
list_for_each_entry_safe(conn, conn_tmp, &sess->sess_conn_list,
conn_list) {
if (conn_count == 0)
break;
if (list_is_last(&conn->conn_list, &sess->sess_conn_list)) {
is_last = 1;
} else {
iscsit_inc_conn_usage_count(conn_tmp);
is_last = 0;
}
iscsit_inc_conn_usage_count(conn);
spin_unlock_bh(&sess->conn_lock);
iscsit_cause_connection_reinstatement(conn, 1);
spin_lock_bh(&sess->conn_lock);
iscsit_dec_conn_usage_count(conn);
if (is_last == 0)
iscsit_dec_conn_usage_count(conn_tmp);
conn_count--;
}
if (atomic_read(&sess->nconn)) {
spin_unlock_bh(&sess->conn_lock);
wait_for_completion(&sess->session_wait_comp);
} else
spin_unlock_bh(&sess->conn_lock);
iscsit_close_session(sess);
return 0;
}
void iscsit_stop_session(
struct iscsi_session *sess,
int session_sleep,
int connection_sleep)
{
u16 conn_count = atomic_read(&sess->nconn);
struct iscsi_conn *conn, *conn_tmp = NULL;
int is_last;
spin_lock_bh(&sess->conn_lock);
if (session_sleep)
atomic_set(&sess->sleep_on_sess_wait_comp, 1);
if (connection_sleep) {
list_for_each_entry_safe(conn, conn_tmp, &sess->sess_conn_list,
conn_list) {
if (conn_count == 0)
break;
if (list_is_last(&conn->conn_list, &sess->sess_conn_list)) {
is_last = 1;
} else {
iscsit_inc_conn_usage_count(conn_tmp);
is_last = 0;
}
iscsit_inc_conn_usage_count(conn);
spin_unlock_bh(&sess->conn_lock);
iscsit_cause_connection_reinstatement(conn, 1);
spin_lock_bh(&sess->conn_lock);
iscsit_dec_conn_usage_count(conn);
if (is_last == 0)
iscsit_dec_conn_usage_count(conn_tmp);
conn_count--;
}
} else {
list_for_each_entry(conn, &sess->sess_conn_list, conn_list)
iscsit_cause_connection_reinstatement(conn, 0);
}
if (session_sleep && atomic_read(&sess->nconn)) {
spin_unlock_bh(&sess->conn_lock);
wait_for_completion(&sess->session_wait_comp);
} else
spin_unlock_bh(&sess->conn_lock);
}
int iscsit_release_sessions_for_tpg(struct iscsi_portal_group *tpg, int force)
{
struct iscsi_session *sess;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
struct se_session *se_sess, *se_sess_tmp;
int session_count = 0;
spin_lock_bh(&se_tpg->session_lock);
if (tpg->nsessions && !force) {
spin_unlock_bh(&se_tpg->session_lock);
return -1;
}
list_for_each_entry_safe(se_sess, se_sess_tmp, &se_tpg->tpg_sess_list,
sess_list) {
sess = (struct iscsi_session *)se_sess->fabric_sess_ptr;
spin_lock(&sess->conn_lock);
if (atomic_read(&sess->session_fall_back_to_erl0) ||
atomic_read(&sess->session_logout) ||
(sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)) {
spin_unlock(&sess->conn_lock);
continue;
}
atomic_set(&sess->session_reinstatement, 1);
spin_unlock(&sess->conn_lock);
spin_unlock_bh(&se_tpg->session_lock);
iscsit_free_session(sess);
spin_lock_bh(&se_tpg->session_lock);
session_count++;
}
spin_unlock_bh(&se_tpg->session_lock);
pr_debug("Released %d iSCSI Session(s) from Target Portal"
" Group: %hu\n", session_count, tpg->tpgt);
return 0;
}
MODULE_DESCRIPTION("iSCSI-Target Driver for mainline target infrastructure");
MODULE_VERSION("4.1.x");
MODULE_AUTHOR("nab@Linux-iSCSI.org");
MODULE_LICENSE("GPL");
module_init(iscsi_target_init_module);
module_exit(iscsi_target_cleanup_module);