Linux 5.4-rc5

-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl210Z8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGv+kIAKRpO7EuDokQL4qp hxEEaCMJA1T055EMlNU6FVAq/ZbmapzreUyNYiRMpPWKGTWNMkhIcZQfysYeGZz5 y/KRxAiVxlcB+3v3yRmoZd/XoQmhgvJmqD4zhaGI2Utonow4f/SGSEFFZqqs9WND 4HJROjZHgQ4JBxg9Z+QMo0FxbV/DCZpEOUq51N9WJywyyDRb18zotE83stpU+pE2 fjqT7mk0NLrnYXuDRAbFC1Aau9ed4H6LlwLmxaqxq/Pt5Rz7wIKwKL9HIT4Dm/0a qpani6phhHWL7MwUpa2wkEonFCD03rJFl3DUVJo64Ijh4up5D/jyXQ+GKV2P4WKJ 275Rb5Q= =WiZZ -----END PGP SIGNATURE----- Merge tag 'v5.4-rc5' into rdma.git for-next Linux 5.4-rc5 For dependencies in the next patches Conflict resolved by keeping the delete of the unlock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28 16:36:29 -03:00 · 2019-10-28 16:36:29 -03:00 · 036313316d
parent a52dc3a100 d6d5df1db6
commit 036313316d
939 changed files with 8796 additions and 7839 deletions
--- a/.mailmap
+++ b/.mailmap
@ -196,7 +196,8 @@ Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
-Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
+Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
+Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
@ -229,6 +230,7 @@ Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
 Shuah Khan <shuah@kernel.org> <shuahkh@osg.samsung.com>
 Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
+Simon Arlott <simon@octiron.net> <simon@fire.lp0.eu>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
--- a/4
+++ b/4
@ -1637,6 +1637,10 @@ S: Panoramastrasse 18
 S: D-69126 Heidelberg
 S: Germany

+N: Simon Horman
+M: horms@verge.net.au
+D: Renesas ARM/ARM64 SoC maintainer
+
 N: Christopher Horn
 E: chorn@warwick.net
 D: Miscellaneous sysctl hacks
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@ -615,8 +615,8 @@ on an IO device and is an example of this type.
 Protections
 -----------

-A cgroup is protected to be allocated upto the configured amount of
-the resource if the usages of all its ancestors are under their
+A cgroup is protected upto the configured amount of the resource
+as long as the usages of all its ancestors are under their
 protected levels.  Protections can be hard guarantees or best effort
 soft boundaries.  Protections can also be over-committed in which case
 only upto the amount available to the parent is protected among
@ -1096,7 +1096,10 @@ PAGE_SIZE multiple when read back.
 	is within its effective min boundary, the cgroup's memory
 	won't be reclaimed under any conditions. If there is no
 	unprotected reclaimable memory available, OOM killer
-	is invoked.
+	is invoked. Above the effective min boundary (or
+	effective low boundary if it is higher), pages are reclaimed
+	proportionally to the overage, reducing reclaim pressure for
+	smaller overages.

       Effective min boundary is limited by memory.min values of
 	all ancestor cgroups. If there is memory.min overcommitment
@ -1118,7 +1121,10 @@ PAGE_SIZE multiple when read back.
 	Best-effort memory protection.  If the memory usage of a
 	cgroup is within its effective low boundary, the cgroup's
 	memory won't be reclaimed unless memory can be reclaimed
-	from unprotected cgroups.
+	from unprotected cgroups.  Above the effective low boundary (or
+	effective min boundary if it is higher), pages are reclaimed
+	proportionally to the overage, reducing reclaim pressure for
+	smaller overages.

 	Effective low boundary is limited by memory.low values of
 	all ancestor cgroups. If there is memory.low overcommitment
@ -2482,8 +2488,10 @@ system performance due to overreclaim, to the point where the feature
 becomes self-defeating.

 The memory.low boundary on the other hand is a top-down allocated
-reserve.  A cgroup enjoys reclaim protection when it's within its low,
-which makes delegation of subtrees possible.
+reserve.  A cgroup enjoys reclaim protection when it's within its
+effective low, which makes delegation of subtrees possible. It also
+enjoys having reclaim pressure proportional to its overage when
+above its effective low.

 The original high boundary, the hard limit, is defined as a strict
 limit that can not budge, even if the OOM killer has to be called.
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -5302,6 +5302,10 @@
 				the unplug protocol
 			never -- do not unplug even if version check succeeds

+	xen_legacy_crash	[X86,XEN]
+			Crash from Xen panic notifier, without executing late
+			panic() code such as dumping handler.
+
 	xen_nopvspin	[X86,XEN]
 			Disables the ticketlock slowpath using Xen PV
 			optimizations.
--- a/Documentation/arm64/memory.rst
+++ b/Documentation/arm64/memory.rst
@ -154,11 +154,18 @@ return virtual addresses to userspace from a 48-bit range.

 Software can "opt-in" to receiving VAs from a 52-bit space by
 specifying an mmap hint parameter that is larger than 48-bit.
+
 For example:
-    maybe_high_address = mmap(~0UL, size, prot, flags,...);
+
+.. code-block:: c
+
+   maybe_high_address = mmap(~0UL, size, prot, flags,...);

 It is also possible to build a debug kernel that returns addresses
 from a 52-bit space by enabling the following kernel config options:
+
+.. code-block:: sh
+
   CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y

 Note that this option is only intended for debugging applications
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@ -107,6 +107,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
+----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@ -38,6 +38,7 @@ Core utilities
   protection-keys
   ../RCU/index
   gcc-plugins
+   symbol-namespaces


 Interfaces for kernel debugging
--- a/Documentation/core-api/memory-allocation.rst
+++ b/Documentation/core-api/memory-allocation.rst
@ -98,6 +98,10 @@ limited. The actual limit depends on the hardware and the kernel
 configuration, but it is a good practice to use `kmalloc` for objects
 smaller than page size.

+The address of a chunk allocated with `kmalloc` is aligned to at least
+ARCH_KMALLOC_MINALIGN bytes.  For sizes which are a power of two, the
+alignment is also guaranteed to be at least the respective size.
+
 For large allocations you can use :c:func:`vmalloc` and
 :c:func:`vzalloc`, or directly request pages from the page
 allocator. The memory allocated by `vmalloc` and related functions is
--- a/Documentation/core-api/symbol-namespaces.rst
+++ b/Documentation/core-api/symbol-namespaces.rst
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@ -41,6 +41,9 @@ smaller binary while the latter is 1.1 - 2 times faster.
 Both KASAN modes work with both SLUB and SLAB memory allocators.
 For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.

+To augment reports with last allocation and freeing stack of the physical page,
+it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on.
+
 To disable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:

--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@ -89,6 +89,22 @@ To build, save output files in a separate directory with KBUILD_OUTPUT ::

  $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest

+Additionally you can use the "SKIP_TARGETS" variable on the make command
+line to specify one or more targets to exclude from the TARGETS list.
+
+To run all tests but a single subsystem::
+
+  $ make -C tools/testing/selftests SKIP_TARGETS=ptrace run_tests
+
+You can specify multiple tests to skip::
+
+  $  make SKIP_TARGETS="size timers" kselftest
+
+You can also specify a restricted list of tests to run together with a
+dedicated skiplist::
+
+  $  make TARGETS="bpf breakpoints size timers" SKIP_TARGETS=bpf kselftest
+
 See the top-level tools/testing/selftests/Makefile for the list of all
 possible targets.

--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@ -496,12 +496,12 @@ properties:

      - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
        items:
-          - const: tsd,rk3368-uq7-haikou
+          - const: tsd,rk3368-lion-haikou
          - const: rockchip,rk3368

      - description: Theobroma Systems RK3399-Q7 with Haikou baseboard
        items:
-          - const: tsd,rk3399-q7-haikou
+          - const: tsd,rk3399-puma-haikou
          - const: rockchip,rk3399

      - description: Tronsmart Orion R68 Meta
--- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@ -1,8 +1,11 @@
 * Advanced Interrupt Controller (AIC)

 Required properties:
- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
@ -27,14 +27,12 @@ properties:
  clocks:
    items:
      - description: The CSI interface clock
-      - description: The CSI module clock
      - description: The CSI ISP clock
      - description: The CSI DRAM clock

  clock-names:
    items:
      - const: bus
-      - const: mod
      - const: isp
      - const: ram

@ -89,9 +87,8 @@ examples:
        compatible = "allwinner,sun7i-a20-csi0";
        reg = <0x01c09000 0x1000>;
        interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-                 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-        clock-names = "bus", "mod", "isp", "ram";
+        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+        clock-names = "bus", "isp", "ram";
        resets = <&ccu RST_CSI0>;

        port {
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@ -33,13 +33,13 @@ patternProperties:
          allOf:
            - $ref: "/schemas/types.yaml#/definitions/string"
            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1,
-              GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2,
-              GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12,
-              I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7,
-              I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC,
-              LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
+              ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
+              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
+              I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
+              I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
              MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
@ -48,47 +48,45 @@ patternProperties:
              PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
              SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
-              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5,
-              SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1,
-              SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
-              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5,
-              TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1,
-              TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7,
-              UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
+              UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+              WDTRST3, WDTRST4, ]
        groups:
          allOf:
            - $ref: "/schemas/types.yaml#/definitions/string"
            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0,
-              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1,
-              I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3,
-              I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6,
-              JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
-              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3,
-              MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
-              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1,
-              NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE,
-              PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1,
-              PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3,
-              PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
-              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
-              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1,
-              SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1,
-              SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1,
-              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0,
-              SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7,
-              SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD,
-              SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
-              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13,
-              TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8,
-              TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4,
-              UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
-              UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
+              EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
+              FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
+              GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
+              GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
+              I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
+              I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
+              LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
+              MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
+              NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
+              PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
+              PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
+              PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
+              RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
+              SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
+              SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
+              SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
+              SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
+              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
+              VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]

 required:
  - compatible
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@ -30,8 +30,8 @@ if:
 properties:
  compatible:
    enum:
-      - const: regulator-fixed
-      - const: regulator-fixed-clock
+      - regulator-fixed
+      - regulator-fixed-clock

  regulator-name: true

--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@ -24,15 +24,17 @@ description: |

 properties:
  compatible:
-    items:
-      - enum:
-          - sifive,rocket0
-          - sifive,e5
-          - sifive,e51
-          - sifive,u54-mc
-          - sifive,u54
-          - sifive,u5
-      - const: riscv
+    oneOf:
+      - items:
+          - enum:
+              - sifive,rocket0
+              - sifive,e5
+              - sifive,e51
+              - sifive,u54-mc
+              - sifive,u54
+              - sifive,u5
+          - const: riscv
+      - const: riscv    # Simulator only
    description:
      Identifies that the hart uses the RISC-V instruction set
      and identifies the type of the hart.
@ -66,12 +68,8 @@ properties:
      insensitive, letters in the riscv,isa string must be all
      lowercase to simplify parsing.

-  timebase-frequency:
-    type: integer
-    minimum: 1
-    description:
-      Specifies the clock frequency of the system timer in Hz.
-      This value is common to all harts on a single system image.
+  # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
+  timebase-frequency: false

  interrupt-controller:
    type: object
@ -93,7 +91,6 @@ properties:

 required:
  - riscv,isa
-  - timebase-frequency
  - interrupt-controller

 examples:
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@ -26,6 +26,8 @@ Required properties:
    - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
    - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
    - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
+    - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART.
+    - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART.
    - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
    - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
    - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
--- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
@ -85,8 +85,8 @@ A child node must exist to represent the core DWC2 IP block. The name of
 the node is not important. The content of the node is defined in dwc2.txt.

 PHY documentation is provided in the following places:
- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml

 Example device nodes:
 	usb: usb@ffe09000 {
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@ -63,7 +63,11 @@ properties:
    description:
      Set this flag to force EHCI reset after resume.

-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb

 required:
  - compatible
@ -89,6 +93,7 @@ examples:
        interrupts = <39>;
        clocks = <&ahb_gates 1>;
        phys = <&usbphy 1>;
+        phy-names = "usb";
    };

 ...
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@ -67,7 +67,11 @@ properties:
    description:
      Overrides the detected port count

-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb

 required:
  - compatible
@ -84,6 +88,7 @@ examples:
          interrupts = <64>;
          clocks = <&usb_clk 6>, <&ahb_gates 2>;
          phys = <&usbphy 1>;
+          phy-names = "usb";
      };

 ...
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@ -33,7 +33,7 @@ Required properties:
 	"dma_ck": dma_bus clock for data transfer by DMA,
 	"xhci_ck": controller clock

- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory

 Optional properties:
 - wakeup-source : enable USB remote wakeup;
@ -53,7 +53,7 @@ Optional properties:
 	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 - imod-interval-ns: default interrupt moderation interval is 5000ns

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.

 Example:
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@ -17,7 +17,7 @@ Required properties:
 - clock-names : must contain "sys_ck" for clock of controller,
 	the following clocks are optional:
 	"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
 - dr_mode : should be one of "host", "peripheral" or "otg",
 	refer to usb/generic.txt

@ -60,7 +60,7 @@ Optional properties:
 - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
 	bit1 for u3port1, ... etc;

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.

 Sub-nodes:
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@ -18,8 +18,13 @@ properties:
    description:
      List of all the USB PHYs on this HCD

+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
 examples:
  - |
    usb {
        phys = <&usb2_phy1>, <&usb3_phy1>;
+        phy-names = "usb";
    };
--- a/Documentation/devicetree/bindings/usb/usb-uhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
@ -6,7 +6,7 @@ Required properties:
 - reg : Should contain 1 register ranges(address and length)
 - interrupts : UHCI controller interrupt

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.

 Example:
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@ -41,9 +41,9 @@ Optional properties:
  - usb3-lpm-capable: determines if platform is USB3 LPM capable
  - quirk-broken-port-ped: set if the controller has broken port disable mechanism
  - imod-interval-ns: default interrupt moderation interval is 5000ns
-  - phys : see usb-hcd.txt in the current directory
+  - phys : see usb-hcd.yaml in the current directory

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.


--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@ -7,6 +7,7 @@ Linux Hardware Monitoring

   hwmon-kernel-api
   pmbus-core
+   inspur-ipsps1
   submitting-patches
   sysfs-interface
   userspace-tools
--- a/Documentation/hwmon/inspur-ipsps1.rst
+++ b/Documentation/hwmon/inspur-ipsps1.rst
@ -1,5 +1,5 @@
 Kernel driver inspur-ipsps1
-=======================
+===========================

 Supported chips:

--- a/Documentation/hwmon/k10temp.rst
+++ b/Documentation/hwmon/k10temp.rst
@ -21,10 +21,17 @@ Supported chips:

 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)

-* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri",
+  "Carrizo", "Stoney Ridge", "Bristol Ridge"

 * AMD Family 16h processors: "Kabini", "Mullins"

+* AMD Family 17h processors: "Zen", "Zen 2"
+
+* AMD Family 18h processors: "Hygon Dhyana"
+
+* AMD Family 19h processors: "Zen 3"
+
  Prefix: 'k10temp'

  Addresses scanned: PCI space
@ -110,3 +117,12 @@ The maximum value for Tctl is available in the file temp1_max.
 If the BIOS has enabled hardware temperature control, the threshold at
 which the processor will throttle itself to avoid damage is available in
 temp1_crit and temp1_crit_hyst.
+
+On some AMD CPUs, there is a difference between the die temperature (Tdie) and
+the reported temperature (Tctl). Tdie is the real measured temperature, and
+Tctl is used for fan control. While Tctl is always available as temp1_input,
+the driver exports Tdie temperature as temp2_input for those CPUs which support
+it.
+
+Models from 17h family report relative temperature, the driver aims to
+compensate and report the real temperature.
--- a/Documentation/networking/device_drivers/pensando/ionic.rst
+++ b/Documentation/networking/device_drivers/pensando/ionic.rst
@ -36,8 +36,10 @@ Support
 =======
 For general Linux networking support, please use the netdev mailing
 list, which is monitored by Pensando personnel::
+
  netdev@vger.kernel.org

 For more specific support needs, please use the Pensando driver support
 email::
-	drivers@pensando.io
+
+  drivers@pensando.io
--- a/Documentation/networking/net_dim.txt
+++ b/Documentation/networking/net_dim.txt
@ -92,16 +92,16 @@ under some conditions.
 Part III: Registering a Network Device to DIM
 ==============================================

-Net DIM API exposes the main function net_dim(struct net_dim *dim,
-struct net_dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim(struct dim *dim,
+struct dim_sample end_sample). This function is the entry point to the Net
 DIM algorithm and has to be called every time the driver would like to check if
 it should change interrupt moderation parameters. The driver should provide two
-data structures: struct net_dim and struct net_dim_sample. Struct net_dim
+data structures: struct dim and struct dim_sample. Struct dim
 describes the state of DIM for a specific object (RX queue, TX queue,
 other queues, etc.). This includes the current selected profile, previous data
 samples, the callback function provided by the driver and more.
-Struct net_dim_sample describes a data sample, which will be compared to the
-data sample stored in struct net_dim in order to decide on the algorithm's next
+Struct dim_sample describes a data sample, which will be compared to the
+data sample stored in struct dim in order to decide on the algorithm's next
 step. The sample should include bytes, packets and interrupts, measured by
 the driver.

@ -110,9 +110,9 @@ main net_dim() function. The recommended method is to call net_dim() on each
 interrupt. Since Net DIM has a built-in moderation and it might decide to skip
 iterations under certain conditions, there is no need to moderate the net_dim()
 calls as well. As mentioned above, the driver needs to provide an object of type
-struct net_dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct net_dim as part of its data structure and use it
-as the main Net DIM API object. The struct net_dim_sample should hold the latest
+struct dim to the net_dim() function call. It is advised for each entity
+using Net DIM to hold a struct dim as part of its data structure and use it
+as the main Net DIM API object. The struct dim_sample should hold the latest
 bytes, packets and interrupts count. No need to perform any calculations, just
 include the raw data.

@ -132,19 +132,19 @@ usage is not complete but it should make the outline of the usage clear.

 my_driver.c:

-#include <linux/net_dim.h>
+#include <linux/dim.h>

 /* Callback for net DIM to schedule on a decision to change moderation */
 void my_driver_do_dim_work(struct work_struct *work)
 {
-	/* Get struct net_dim from struct work_struct */
-	struct net_dim *dim = container_of(work, struct net_dim,
-					   work);
+	/* Get struct dim from struct work_struct */
+	struct dim *dim = container_of(work, struct dim,
+				       work);
 	/* Do interrupt moderation related stuff */
 	...

 	/* Signal net DIM work is done and it should move to next iteration */
-	dim->state = NET_DIM_START_MEASURE;
+	dim->state = DIM_START_MEASURE;
 }

 /* My driver's interrupt handler */
@ -152,13 +152,13 @@ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
 {
 	...
 	/* A struct to hold current measured data */
-	struct net_dim_sample dim_sample;
+	struct dim_sample dim_sample;
 	...
 	/* Initiate data sample struct with current data */
-	net_dim_sample(my_entity->events,
-		       my_entity->packets,
-		       my_entity->bytes,
-		       &dim_sample);
+	dim_update_sample(my_entity->events,
+		          my_entity->packets,
+		          my_entity->bytes,
+		          &dim_sample);
 	/* Call net DIM */
 	net_dim(&my_entity->dim, dim_sample);
 	...
--- a/Documentation/process/coding-style.rst
+++ b/Documentation/process/coding-style.rst
@ -56,7 +56,7 @@ instead of ``double-indenting`` the ``case`` labels.  E.g.:
 	case 'K':
 	case 'k':
 		mem <<= 10;
-		/* fall through */
+		fallthrough;
 	default:
 		break;
 	}
--- a/Documentation/process/deprecated.rst
+++ b/Documentation/process/deprecated.rst
@ -122,14 +122,27 @@ memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`)

 Implicit switch case fall-through
 ---------------------------------
-The C language allows switch cases to "fall through" when
-a "break" statement is missing at the end of a case. This,
-however, introduces ambiguity in the code, as it's not always
-clear if the missing break is intentional or a bug. As there
-have been a long list of flaws `due to missing "break" statements
+The C language allows switch cases to "fall-through" when a "break" statement
+is missing at the end of a case. This, however, introduces ambiguity in the
+code, as it's not always clear if the missing break is intentional or a bug.
+
+As there have been a long list of flaws `due to missing "break" statements
 <https://cwe.mitre.org/data/definitions/484.html>`_, we no longer allow
-"implicit fall-through". In order to identify an intentional fall-through
-case, we have adopted the marking used by static analyzers: a comment
-saying `/* Fall through */`. Once the C++17 `__attribute__((fallthrough))`
-is more widely handled by C compilers, static analyzers, and IDEs, we can
-switch to using that instead.
+"implicit fall-through".
+
+In order to identify intentional fall-through cases, we have adopted a
+pseudo-keyword macro 'fallthrough' which expands to gcc's extension
+__attribute__((__fallthrough__)).  `Statement Attributes
+<https://gcc.gnu.org/onlinedocs/gcc/Statement-Attributes.html>`_
+
+When the C17/C18  [[fallthrough]] syntax is more commonly supported by
+C compilers, static analyzers, and IDEs, we can switch to using that syntax
+for the macro pseudo-keyword.
+
+All switch/case blocks must end in one of:
+
+	break;
+	fallthrough;
+	continue;
+	goto <label>;
+	return [expression];
--- a/Documentation/usb/rio.rst
+++ b/Documentation/usb/rio.rst
@ -1,109 +0,0 @@
-============
-Diamonds Rio
-============
-
-Copyright (C) 1999, 2000 Bruce Tenison
-
-Portions Copyright (C) 1999, 2000 David Nelson
-
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-Changes
-=======
-
- Initial Revision
-
-
-Overview
-========
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.
-Before I explain how to use this to access the Rio500 please be warned:
-
-.. warning::
-
-   Please note that this software is still under development.  The authors
-   are in no way responsible for any damage that may occur, no matter how
-   inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore
-down to nothing and appear to have corrupted the flash memory. My RIO
-needed to be replaced as a result.  Diamond tech support is aware of the
-problem.  Do NOT allow your batteries to wear down to nothing before
-changing them.  It appears RIO 500 firmware does not handle low battery
-power well at all.
-
-On systems with OHCI controllers, the kernel OHCI code appears to have
-power on problems with some chipsets.  If you are having problems
-connecting to your RIO 500, try turning it on first and then plugging it
-into the USB cable.
-
-Contact Information
-------------------
-
-   The main page for the project is hosted at sourceforge.net in the following
-   URL: <http://rio500.sourceforge.net>. You can also go to the project's
-   sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
-   There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors
-------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
-with some important information regarding the communication with the Rio.
-
-Additional Information and userspace tools
-
-	http://rio500.sourceforge.net/
-
-
-Requirements
-============
-
-A host with a USB port running a Linux kernel with RIO 500 support enabled.
-
-The driver is a module called rio500, which should be automatically loaded
-as you plug in your device. If that fails you can manually load it with
-
-  modprobe rio500
-
-Udev should automatically create a device node as soon as plug in your device.
-If that fails, you can manually add a device for the USB rio500::
-
-  mknod /dev/usb/rio500 c 180 64
-
-In that case, set appropriate permissions for /dev/usb/rio500 (don't forget
-about group and world permissions).  Both read and write permissions are
-required for proper operation.
-
-That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-Limits
-======
-
-You can use only a single rio500 device at a time with your computer.
-
-Bugs
-====
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net
--- a/43
+++ b/43
@ -2165,12 +2165,10 @@ F:	arch/arm64/boot/dts/realtek/
 F:	Documentation/devicetree/bindings/arm/realtek.yaml

 ARM/RENESAS ARM64 ARCHITECTURE
-M:	Simon Horman <horms@verge.net.au>
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
 S:	Supported
 F:	arch/arm64/boot/dts/renesas/
@ -2282,12 +2280,10 @@ S:	Maintained
 F:	drivers/media/platform/s5p-mfc/

 ARM/SHMOBILE ARM ARCHITECTURE
-M:	Simon Horman <horms@verge.net.au>
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
 S:	Supported
 F:	arch/arm/boot/dts/emev2*
@ -2327,11 +2323,13 @@ F:	drivers/edac/altera_edac.

 ARM/SPREADTRUM SoC SUPPORT
 M:	Orson Zhai <orsonzhai@gmail.com>
-M:	Baolin Wang <baolin.wang@linaro.org>
+M:	Baolin Wang <baolin.wang7@gmail.com>
 M:	Chunyan Zhang <zhang.lyra@gmail.com>
 S:	Maintained
 F:	arch/arm64/boot/dts/sprd
 N:	sprd
+N:	sc27xx
+N:	sc2731

 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <patrice.chotard@st.com>
@ -3100,7 +3098,7 @@ S:	Supported
 F:	arch/arm64/net/

 BPF JIT for MIPS (32-BIT AND 64-BIT)
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Maintained
@ -3187,7 +3185,7 @@ N:	bcm216*
 N:	kona
 F:	arch/arm/mach-bcm/

-BROADCOM BCM2835 ARM ARCHITECTURE
+BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
 M:	Eric Anholt <eric@anholt.net>
 M:	Stefan Wahren <wahrenst@gmx.net>
 L:	bcm-kernel-feedback-list@broadcom.com
@ -3195,6 +3193,7 @@ L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/anholt/linux
 S:	Maintained
+N:	bcm2711
 N:	bcm2835
 F:	drivers/staging/vc04_services

@ -3241,8 +3240,6 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*

 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Brian Norris <computersforpeace@gmail.com>
-M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -7997,7 +7994,7 @@ S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c

 IMGTEC ASCII LCD DRIVER
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
 F:	drivers/auxdisplay/img-ascii-lcd.c
@ -9118,7 +9115,7 @@ F:	drivers/auxdisplay/ks0108.c
 F:	include/linux/ks0108.h

 L3MDEV
-M:	David Ahern <dsa@cumulusnetworks.com>
+M:	David Ahern <dsahern@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	net/l3mdev
@ -9179,6 +9176,7 @@ M:	Pavel Machek <pavel@ucw.cz>
 R:	Dan Murphy <dmurphy@ti.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/leds/
 F:	drivers/leds/
@ -10250,7 +10248,7 @@ MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <nbd@openwrt.org>
 M:	John Crispin <john@phrozen.org>
 M:	Sean Wang <sean.wang@mediatek.com>
-M:	Nelson Chang <nelson.chang@mediatek.com>
+M:	Mark Lee <Mark-MC.Lee@mediatek.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/mediatek/
@ -10823,7 +10821,7 @@ F:	drivers/usb/image/microtek.*

 MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 M:	James Hogan <jhogan@kernel.org>
 L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
@ -10837,7 +10835,7 @@ F:	arch/mips/
 F:	drivers/platform/mips/

 MIPS BOSTON DEVELOPMENT BOARD
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
@ -10847,7 +10845,7 @@ F:	drivers/clk/imgtec/clk-boston.c
 F:	include/dt-bindings/clock/boston-clock.h

 MIPS GENERIC PLATFORM
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
@ -11539,6 +11537,7 @@ NSDEPS
 M:	Matthias Maennich <maennich@google.com>
 S:	Maintained
 F:	scripts/nsdeps
+F:	Documentation/core-api/symbol-namespaces.rst

 NTB AMD DRIVER
 M:	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
@ -12306,12 +12305,15 @@ F:	arch/parisc/
 F:	Documentation/parisc/
 F:	drivers/parisc/
 F:	drivers/char/agp/parisc-agp.c
+F:	drivers/input/misc/hp_sdc_rtc.c
 F:	drivers/input/serio/gscps2.c
+F:	drivers/input/serio/hp_sdc*
 F:	drivers/parport/parport_gsc.*
 F:	drivers/tty/serial/8250/8250_gsc.c
 F:	drivers/video/fbdev/sti*
 F:	drivers/video/console/sti*
 F:	drivers/video/logo/logo_parisc*
+F:	include/linux/hp_sdc.h

 PARMAN
 M:	Jiri Pirko <jiri@mellanox.com>
@ -13355,7 +13357,7 @@ S:	Maintained
 F:	drivers/scsi/qla1280.[ch]

 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	qla2xxx-upstream@qlogic.com
+M:	hmadhani@marvell.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@ -16758,13 +16760,6 @@ W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c

-USB DIAMOND RIO500 DRIVER
-M:	Cesar Miquel <miquel@df.uba.ar>
-L:	rio500-users@lists.sourceforge.net
-W:	http://rio500.sourceforge.net
-S:	Maintained
-F:	drivers/usb/misc/rio500*
-
 USB EHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
@ -17431,7 +17426,7 @@ F:	include/linux/regulator/
 K:	regulator_get_optional

 VRF
-M:	David Ahern <dsa@cumulusnetworks.com>
+M:	David Ahern <dsahern@kernel.org>
 M:	Shrijeet Mukherjee <shrijeet@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
--- a/13
+++ b/13
@ -2,8 +2,8 @@
 VERSION = 5
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
-NAME = Nesting Opossum
+EXTRAVERSION = -rc5
+NAME = Kleptomaniac Octopus

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@ -599,7 +599,7 @@ endif
 # in addition to whatever we do anyway.
 # Just "make" or "make all" shall build modules as well

-ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+ifneq ($(filter all _all modules nsdeps,$(MAKECMDGOALS)),)
  KBUILD_MODULES := 1
 endif

@ -1037,7 +1037,7 @@ export KBUILD_VMLINUX_OBJS := $(head-y) $(init-y) $(core-y) $(libs-y2) \
 export KBUILD_VMLINUX_LIBS := $(libs-y1)
 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 export LDFLAGS_vmlinux
-# used by scripts/package/Makefile
+# used by scripts/Makefile.package
 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)

 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)
@ -1217,9 +1217,8 @@ PHONY += kselftest
 kselftest:
 	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests

-PHONY += kselftest-clean
-kselftest-clean:
-	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
+kselftest-%: FORCE
+	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*

 PHONY += kselftest-merge
 kselftest-merge:
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@ -111,13 +111,13 @@ pca9548@70 {
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;

 		i2c@0 {
 			/* FMC A */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-mux-idle-disconnect;
 		};

 		i2c@1 {
@ -125,7 +125,6 @@ i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-mux-idle-disconnect;
 		};

 		i2c@2 {
@ -133,7 +132,6 @@ i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-mux-idle-disconnect;
 		};

 		i2c@3 {
@ -141,7 +139,6 @@ i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-mux-idle-disconnect;
 		};

 		i2c@4 {
@ -149,14 +146,12 @@ i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			i2c-mux-idle-disconnect;
 		};

 		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-			i2c-mux-idle-disconnect;

 			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
 			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
@ -182,14 +177,12 @@ i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
-			i2c-mux-idle-disconnect;
 		};

 		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			i2c-mux-idle-disconnect;

 			u41: pca9575@20 {
 				compatible = "nxp,pca9575";
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@ -113,6 +113,7 @@ &sdhci {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	status = "okay";
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@ -9,6 +9,14 @@ memory@0 {
 		reg = <0 0x40000000>;
 	};

+	leds {
+		/*
+		 * Since there is no upstream GPIO driver yet,
+		 * remove the incomplete node.
+		 */
+		/delete-node/ act;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
--- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
@ -207,6 +207,10 @@ &reg_soc
 	vin-supply = <&sw1c_reg>;
 };

+&snvs_poweroff {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@ -448,7 +448,7 @@ gpt1: gpt@302d0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
 					 <&clks IMX7D_GPT1_ROOT_CLK>;
 				clock-names = "ipg", "per";
 			};
@ -457,7 +457,7 @@ gpt2: gpt@302e0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
 					 <&clks IMX7D_GPT2_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
@ -467,7 +467,7 @@ gpt3: gpt@302f0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
 					 <&clks IMX7D_GPT3_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
@ -477,7 +477,7 @@ gpt4: gpt@30300000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
 					 <&clks IMX7D_GPT4_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@ -192,3 +192,7 @@ twl_power: power {
 &twl_gpio {
 	ti,use-leds;
 };
+
+&twl_keypad {
+	status = "disabled";
+};
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@ -66,9 +66,21 @@ &eth {
 	pinctrl-1 = <&ephy_leds_pins>;
 	status = "okay";

+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	gmac1: mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
+		phy-mode = "gmii";
 		phy-handle = <&phy0>;
 	};

@ -78,7 +90,6 @@ mdio: mdio-bus {

 		phy0: ethernet-phy@0 {
 			reg = <0>;
-			phy-mode = "gmii";
 		};
 	};
 };
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@ -468,14 +468,12 @@ sgmiisys0: syscon@1b128000 {
 			compatible = "mediatek,mt7629-sgmiisys", "syscon";
 			reg = <0x1b128000 0x3000>;
 			#clock-cells = <1>;
-			mediatek,physpeed = "2500";
 		};

 		sgmiisys1: syscon@1b130000 {
 			compatible = "mediatek,mt7629-sgmiisys", "syscon";
 			reg = <0x1b130000 0x3000>;
 			#clock-cells = <1>;
-			mediatek,physpeed = "2500";
 		};
 	};
 };
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@ -369,7 +369,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x4e>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <26000000>;
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@ -474,7 +474,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
 		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x3a>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@ -512,7 +512,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@ -69,7 +69,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
 		ref-clock-frequency = <38400000>;
 	};
 };
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@ -362,7 +362,7 @@ wlcore: wlcore@2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;	/* gpio 14 */
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
 	};
 };
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@ -1146,7 +1146,7 @@ dss_clkctrl: clk@20 {
 		};
 	};

-	gpu_cm: clock-controller@1500 {
+	gpu_cm: gpu_cm@1500 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1500 0x100>;
 		#address-cells = <1>;
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@ -609,13 +609,13 @@ pins1 {
 						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};

@ -637,13 +637,13 @@ pins1 {
 						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};

--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@ -520,6 +520,7 @@ ehci0: usb@1c14000 {
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -529,6 +530,7 @@ ohci0: usb@1c14400 {
 			interrupts = <64>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -608,6 +610,7 @@ ehci1: usb@1c1c000 {
 			interrupts = <40>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -617,6 +620,7 @@ ohci1: usb@1c1c400 {
 			interrupts = <65>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@ -391,6 +391,7 @@ ehci0: usb@1c14000 {
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -400,6 +401,7 @@ ohci0: usb@1c14400 {
 			interrupts = <40>;
 			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@ -545,6 +545,7 @@ ehci0: usb@1c1a000 {
 			clocks = <&ccu CLK_AHB1_EHCI0>;
 			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -555,6 +556,7 @@ ohci0: usb@1c1a400 {
 			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -565,6 +567,7 @@ ehci1: usb@1c1b000 {
 			clocks = <&ccu CLK_AHB1_EHCI1>;
 			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -575,6 +578,7 @@ ohci1: usb@1c1b400 {
 			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@ -380,9 +380,8 @@ csi0: csi@1c09000 {
 			compatible = "allwinner,sun7i-a20-csi0";
 			reg = <0x01c09000 0x1000>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-			clock-names = "bus", "mod", "isp", "ram";
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
 			resets = <&ccu RST_CSI0>;
 			status = "disabled";
 		};
@ -623,6 +622,7 @@ ehci0: usb@1c14000 {
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -632,6 +632,7 @@ ohci0: usb@1c14400 {
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -714,6 +715,7 @@ ehci1: usb@1c1c000 {
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -723,6 +725,7 @@ ohci1: usb@1c1c400 {
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@ -307,6 +307,7 @@ ehci0: usb@1c1a000 {
 			clocks = <&ccu CLK_BUS_EHCI>;
 			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -317,6 +318,7 @@ ohci0: usb@1c1a400 {
 			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
 			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@ -632,6 +632,7 @@ ehci0: usb@1c1a000 {
 			clocks = <&ccu CLK_BUS_EHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -643,6 +644,7 @@ ohci0: usb@1c1a400 {
 			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -654,6 +656,7 @@ ehci1: usb@1c1b000 {
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@ -273,6 +273,7 @@ ehci1: usb@1c19000 {
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -284,6 +285,7 @@ ohci1: usb@1c19400 {
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -294,6 +296,7 @@ ehci2: usb@1c1c000 {
 			clocks = <&ccu CLK_BUS_EHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -305,6 +308,7 @@ ohci2: usb@1c1c400 {
 				 <&ccu CLK_USB_OHCI2>;
 			resets = <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@ -346,6 +346,7 @@ ehci0: usb@a00000 {
 			clocks = <&usb_clocks CLK_BUS_HCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -357,6 +358,7 @@ ohci0: usb@a00400 {
 				 <&usb_clocks CLK_USB_OHCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -378,6 +380,7 @@ ehci1: usb@a01000 {
 			clocks = <&usb_clocks CLK_BUS_HCI1>;
 			resets = <&usb_clocks RST_USB1_HCI>;
 			phys = <&usbphy2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -407,6 +410,7 @@ ehci2: usb@a02000 {
 			clocks = <&usb_clocks CLK_BUS_HCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -418,6 +422,7 @@ ohci2: usb@a02400 {
 				 <&usb_clocks CLK_USB_OHCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@ -304,6 +304,7 @@ ehci1: usb@1c1b000 {
 			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -315,6 +316,7 @@ ohci1: usb@1c1b400 {
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -325,6 +327,7 @@ ehci2: usb@1c1c000 {
 			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -336,6 +339,7 @@ ohci2: usb@1c1c400 {
 				 <&ccu CLK_USB_OHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -346,6 +350,7 @@ ehci3: usb@1c1d000 {
 			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
 			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -357,6 +362,7 @@ ohci3: usb@1c1d400 {
 				 <&ccu CLK_USB_OHCI3>;
 			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@ -602,6 +602,7 @@ tca9548@70 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+		i2c-mux-idle-disconnect;

 		sff0_i2c: i2c@1 {
 			#address-cells = <1>;
@ -640,6 +641,7 @@ tca9548@71 {
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;

 		sff5_i2c: i2c@1 {
 			#address-cells = <1>;
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_MSDOS_FS=y
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@ -195,7 +195,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@ -167,6 +167,7 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y
 CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@ -276,6 +276,7 @@ CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
+CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@ -356,15 +356,15 @@ CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
 CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
 CONFIG_DRM_OMAP_PANEL_DPI=m
 CONFIG_DRM_OMAP_PANEL_DSI_CM=m
-CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
-CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
-CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_TI_TFP410=m
+CONFIG_DRM_PANEL_LG_LB035Q02=m
+CONFIG_DRM_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@ -581,7 +581,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@ -327,7 +327,6 @@ CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
 CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@ -189,7 +189,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@ -98,6 +98,7 @@ config CRYPTO_AES_ARM_CE
 	tristate "Accelerated AES using ARMv8 Crypto Extensions"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_BLKCIPHER
+	select CRYPTO_LIB_AES
 	select CRYPTO_SIMD
 	help
 	  Use an implementation of AES in CBC, CTR and XTS modes that uses
--- a/arch/arm/crypto/aes-ce-core.S
+++ b/arch/arm/crypto/aes-ce-core.S
@ -9,6 +9,7 @@
 #include <asm/assembler.h>

 	.text
+	.arch		armv8-a
 	.fpu		crypto-neon-fp-armv8
 	.align		3

--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@ -82,7 +82,7 @@
 #ifndef __ASSEMBLY__

 #ifdef CONFIG_CPU_CP15_MMU
-static inline unsigned int get_domain(void)
+static __always_inline unsigned int get_domain(void)
 {
 	unsigned int domain;

@ -94,7 +94,7 @@ static inline unsigned int get_domain(void)
 	return domain;
 }

-static inline void set_domain(unsigned val)
+static __always_inline void set_domain(unsigned int val)
 {
 	asm volatile(
 	"mcr	p15, 0, %0, c3, c0	@ set domain"
@ -102,12 +102,12 @@ static inline void set_domain(unsigned val)
 	isb();
 }
 #else
-static inline unsigned int get_domain(void)
+static __always_inline unsigned int get_domain(void)
 {
 	return 0;
 }

-static inline void set_domain(unsigned val)
+static __always_inline void set_domain(unsigned int val)
 {
 }
 #endif
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@ -22,7 +22,7 @@
 * perform such accesses (eg, via list poison values) which could then
 * be exploited for priviledge escalation.
 */
-static inline unsigned int uaccess_save_and_enable(void)
+static __always_inline unsigned int uaccess_save_and_enable(void)
 {
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	unsigned int old_domain = get_domain();
@ -37,7 +37,7 @@ static inline unsigned int uaccess_save_and_enable(void)
 #endif
 }

-static inline void uaccess_restore(unsigned int flags)
+static __always_inline void uaccess_restore(unsigned int flags)
 {
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/* Restore the user access mask */
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@ -68,7 +68,7 @@ ENDPROC(__vet_atags)
 * The following fragment of code is executed with the MMU on in MMU mode,
 * and uses absolute addresses; this is not position independent.
 *
- *  r0  = cp#15 control register
+ *  r0  = cp#15 control register (exc_ret for M-class)
 *  r1  = machine ID
 *  r2  = atags/dtb pointer
 *  r9  = processor ID
@ -137,7 +137,8 @@ __mmap_switched_data:
 #ifdef CONFIG_CPU_CP15
 	.long	cr_alignment			@ r3
 #else
-	.long	0				@ r3
+M_CLASS(.long	exc_ret)			@ r3
+AR_CLASS(.long	0)				@ r3
 #endif
 	.size	__mmap_switched_data, . - __mmap_switched_data

--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@ -201,6 +201,8 @@ M_CLASS(streq	r3, [r12, #PMSAv8_MAIR1])
 	bic	r0, r0, #V7M_SCB_CCR_IC
 #endif
 	str	r0, [r12, V7M_SCB_CCR]
+	/* Pass exc_ret to __mmap_switched */
+	mov	r0, r10
 #endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
 	ret	lr
 ENDPROC(__after_proc_init)
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@ -462,8 +462,8 @@ static s8 dm365_queue_priority_mapping[][2] = {
 };

 static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
 	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
 	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
 	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@ -89,6 +89,13 @@ static struct iommu_platform_data omap3_iommu_pdata = {
 	.reset_name = "mmu",
 	.assert_reset = omap_device_assert_hardreset,
 	.deassert_reset = omap_device_deassert_hardreset,
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
+};
+
+static struct iommu_platform_data omap3_iommu_isp_pdata = {
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
 };

 static int omap3_sbc_t3730_twl_callback(struct device *dev,
@ -424,6 +431,8 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 	.reset_name = "mmu_cache",
 	.assert_reset = omap_device_assert_hardreset,
 	.deassert_reset = omap_device_deassert_hardreset,
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
 };
 #endif

@ -617,6 +626,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
 		       &omap3_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap2-iommu", 0x480bd400, "480bd400.mmu",
+		       &omap3_iommu_isp_pdata),
 	OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
 		       "480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
 	OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@ -324,7 +324,7 @@ union offset_union {
 	__put32_unaligned_check("strbt", val, addr)

 static void
-do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs *regs, union offset_union offset)
+do_alignment_finish_ldst(unsigned long addr, u32 instr, struct pt_regs *regs, union offset_union offset)
 {
 	if (!LDST_U_BIT(instr))
 		offset.un = -offset.un;
@ -337,7 +337,7 @@ do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs
 }

 static int
-do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+do_alignment_ldrhstrh(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);

@ -386,8 +386,7 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 }

 static int
-do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
-		      struct pt_regs *regs)
+do_alignment_ldrdstrd(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);
 	unsigned int rd2;
@ -449,7 +448,7 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 }

 static int
-do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+do_alignment_ldrstr(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);

@ -498,7 +497,7 @@ do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *reg
 * PU = 10             A                    B
 */
 static int
-do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+do_alignment_ldmstm(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd, rn, correction, nr_regs, regbits;
 	unsigned long eaddr, newaddr;
@ -539,7 +538,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 	 * processor for us.
 	 */
 	if (addr != eaddr) {
-		pr_err("LDMSTM: PC = %08lx, instr = %08lx, "
+		pr_err("LDMSTM: PC = %08lx, instr = %08x, "
 			"addr = %08lx, eaddr = %08lx\n",
 			 instruction_pointer(regs), instr, addr, eaddr);
 		show_regs(regs);
@ -716,10 +715,10 @@ thumb2arm(u16 tinstr)
 * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
 */
 static void *
-do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
+do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs,
 			    union offset_union *poffset)
 {
-	unsigned long instr = *pinstr;
+	u32 instr = *pinstr;
 	u16 tinst1 = (instr >> 16) & 0xffff;
 	u16 tinst2 = instr & 0xffff;

@ -767,17 +766,48 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
 	return NULL;
 }

+static int alignment_get_arm(struct pt_regs *regs, u32 *ip, u32 *inst)
+{
+	u32 instr = 0;
+	int fault;
+
+	if (user_mode(regs))
+		fault = get_user(instr, ip);
+	else
+		fault = probe_kernel_address(ip, instr);
+
+	*inst = __mem_to_opcode_arm(instr);
+
+	return fault;
+}
+
+static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst)
+{
+	u16 instr = 0;
+	int fault;
+
+	if (user_mode(regs))
+		fault = get_user(instr, ip);
+	else
+		fault = probe_kernel_address(ip, instr);
+
+	*inst = __mem_to_opcode_thumb16(instr);
+
+	return fault;
+}
+
 static int
 do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	union offset_union uninitialized_var(offset);
-	unsigned long instr = 0, instrptr;
-	int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
+	unsigned long instrptr;
+	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
 	unsigned int type;
-	unsigned int fault;
+	u32 instr = 0;
 	u16 tinstr = 0;
 	int isize = 4;
 	int thumb2_32b = 0;
+	int fault;

 	if (interrupts_enabled(regs))
 		local_irq_enable();
@ -786,15 +816,14 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)

 	if (thumb_mode(regs)) {
 		u16 *ptr = (u16 *)(instrptr & ~1);
-		fault = probe_kernel_address(ptr, tinstr);
-		tinstr = __mem_to_opcode_thumb16(tinstr);
+
+		fault = alignment_get_thumb(regs, ptr, &tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
-				u16 tinst2 = 0;
-				fault = probe_kernel_address(ptr + 1, tinst2);
-				tinst2 = __mem_to_opcode_thumb16(tinst2);
+				u16 tinst2;
+				fault = alignment_get_thumb(regs, ptr + 1, &tinst2);
 				instr = __opcode_thumb32_compose(tinstr, tinst2);
 				thumb2_32b = 1;
 			} else {
@ -803,8 +832,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 			}
 		}
 	} else {
-		fault = probe_kernel_address((void *)instrptr, instr);
-		instr = __mem_to_opcode_arm(instr);
+		fault = alignment_get_arm(regs, (void *)instrptr, &instr);
 	}

 	if (fault) {
@ -926,7 +954,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	 * Oops, we didn't handle the instruction.
 	 */
 	pr_err("Alignment trap: not handling instruction "
-		"%0*lx at [<%08lx>]\n",
+		"%0*x at [<%08lx>]\n",
 		isize << 1,
 		isize == 2 ? tinstr : instr, instrptr);
 	ai_skipped += 1;
@ -936,7 +964,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	ai_user += 1;

 	if (ai_usermode & UM_WARN)
-		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
+		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*x "
 		       "Address=0x%08lx FSR 0x%03x\n", current->comm,
 			task_pid_nr(current), instrptr,
 			isize << 1,
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@ -132,13 +132,11 @@ __v7m_setup_cont:
 	dsb
 	mov	r6, lr			@ save LR
 	ldr	sp, =init_thread_union + THREAD_START_SP
-	stmia	sp, {r0-r3, r12}
 	cpsie	i
 	svc	#0
 1:	cpsid	i
-	ldr	r0, =exc_ret
-	orr	lr, lr, #EXC_RET_THREADMODE_PROCESSSTACK
-	str	lr, [r0]
+	/* Calculate exc_ret */
+	orr	r10, lr, #EXC_RET_THREADMODE_PROCESSSTACK
 	ldmia	sp, {r0-r3, r12}
 	str	r5, [r12, #11 * 4]	@ restore the original SVC vector entry
 	mov	lr, r6			@ restore LR
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -110,7 +110,6 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_COMPAT_VDSO if (!CPU_BIG_ENDIAN && COMPAT)
 	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
 	select HAVE_PCI
@ -617,6 +616,23 @@ config CAVIUM_ERRATUM_30115

 	  If unsure, say Y.

+config CAVIUM_TX2_ERRATUM_219
+	bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails"
+	default y
+	help
+	  On Cavium ThunderX2, a load, store or prefetch instruction between a
+	  TTBR update and the corresponding context synchronizing operation can
+	  cause a spurious Data Abort to be delivered to any hardware thread in
+	  the CPU core.
+
+	  Work around the issue by avoiding the problematic code sequence and
+	  trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The
+	  trap handler performs the corresponding register access, skips the
+	  instruction and ensures context synchronization by virtue of the
+	  exception return.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
@ -1159,7 +1175,7 @@ menuconfig COMPAT
 if COMPAT

 config KUSER_HELPERS
-	bool "Enable kuser helpers page for 32 bit applications"
+	bool "Enable kuser helpers page for 32-bit applications"
 	default y
 	help
 	  Warning: disabling this option may break 32-bit user programs.
@ -1185,6 +1201,18 @@ config KUSER_HELPERS
 	  Say N here only if you are absolutely certain that you do not
 	  need these helpers; otherwise, the safe option is to say Y.

+config COMPAT_VDSO
+	bool "Enable vDSO for 32-bit applications"
+	depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
+	select GENERIC_COMPAT_VDSO
+	default y
+	help
+	  Place in the process address space of 32-bit applications an
+	  ELF shared object providing fast implementations of gettimeofday
+	  and clock_gettime.
+
+	  You must have a 32-bit build of glibc 2.22 or later for programs
+	  to seamlessly take advantage of this.

 menuconfig ARMV8_DEPRECATED
 	bool "Emulate deprecated/obsolete ARMv8 instructions"
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@ -53,22 +53,6 @@ $(warning Detected assembler with broken .inst; disassembly will be unreliable)
  endif
 endif

-ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y)
-  CROSS_COMPILE_COMPAT ?= $(CONFIG_CROSS_COMPILE_COMPAT_VDSO:"%"=%)
-
-  ifeq ($(CONFIG_CC_IS_CLANG), y)
-    $(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built)
-  else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),)
-    $(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built)
-  else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),)
-    $(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT)
-  else
-    export CROSS_COMPILE_COMPAT
-    export CONFIG_COMPAT_VDSO := y
-    compat_vdso := -DCONFIG_COMPAT_VDSO=1
-  endif
-endif
-
 KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr) $(brokengasinst)	\
 		   $(compat_vdso) $(cc_has_k_constraint)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@ -63,3 +63,12 @@ ext_rgmii_phy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@ -104,6 +104,7 @@ &dai {

 &ehci0 {
 	phys = <&usbphy 0>;
+	phy-names = "usb";
 	status = "okay";
 };

@ -150,6 +151,7 @@ &mmc2 {

 &ohci0 {
 	phys = <&usbphy 0>;
+	phy-names = "usb";
 	status = "okay";
 };

--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@ -159,6 +159,12 @@ &ohci1 {
 };

 &reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
 	regulator-name = "vcc-phy";
 };

--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@ -142,15 +142,6 @@ osc32k: osc32k_clk {
 		clock-output-names = "ext-osc32k";
 	};

-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@ -553,6 +544,7 @@ ehci1: usb@1c1b000 {
 			resets = <&ccu RST_BUS_OHCI1>,
 				 <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -564,6 +556,7 @@ ohci1: usb@1c1b400 {
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@ -547,6 +547,7 @@ ehci3: usb@5311000 {
 			resets = <&ccu RST_BUS_OHCI3>,
 				 <&ccu RST_BUS_EHCI3>;
 			phys = <&usb2phy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};

@ -558,6 +559,7 @@ ohci3: usb@5311400 {
 				 <&ccu CLK_USB_OHCI3>;
 			resets = <&ccu RST_BUS_OHCI3>;
 			phys = <&usb2phy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};

--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@ -42,13 +42,14 @@ pinconf: pinconf@140000 {

 		pinmux: pinmux@14029c {
 			compatible = "pinctrl-single";
-			reg = <0x0014029c 0x250>;
+			reg = <0x0014029c 0x26c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
 			pinctrl-single,gpio-range = <
-				&range 0 154 MODE_GPIO
+				&range 0  91 MODE_GPIO
+				&range 95 60 MODE_GPIO
 				>;
 			range: gpio-range {
 				#pinctrl-single,gpio-range-cells = <3>;
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@ -464,8 +464,7 @@ gpio_hsls: gpio@d0000 {
 					<&pinmux 108 16 27>,
 					<&pinmux 135 77 6>,
 					<&pinmux 141 67 4>,
-					<&pinmux 145 149 6>,
-					<&pinmux 151 91 4>;
+					<&pinmux 145 149 6>;
 		};

 		i2c1: i2c@e0000 {
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@ -33,7 +33,7 @@ cpu@0 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster0_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@1 {
@ -49,7 +49,7 @@ cpu@1 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster0_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@100 {
@ -65,7 +65,7 @@ cpu@100 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster1_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@101 {
@ -81,7 +81,7 @@ cpu@101 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster1_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@200 {
@ -97,7 +97,7 @@ cpu@200 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster2_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@201 {
@ -113,7 +113,7 @@ cpu@201 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster2_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@300 {
@ -129,7 +129,7 @@ cpu@300 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster3_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@301 {
@ -145,7 +145,7 @@ cpu@301 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster3_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@400 {
@ -161,7 +161,7 @@ cpu@400 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster4_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@401 {
@ -177,7 +177,7 @@ cpu@401 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster4_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@500 {
@ -193,7 +193,7 @@ cpu@500 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster5_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@501 {
@ -209,7 +209,7 @@ cpu@501 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster5_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@600 {
@ -225,7 +225,7 @@ cpu@600 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster6_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@601 {
@ -241,7 +241,7 @@ cpu@601 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster6_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@700 {
@ -257,7 +257,7 @@ cpu@700 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster7_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cpu@701 {
@ -273,7 +273,7 @@ cpu@701 {
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster7_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};

 		cluster0_l2: l2-cache0 {
@ -340,9 +340,9 @@ cluster7_l2: l2-cache7 {
 			cache-level = <2>;
 		};

-		cpu_pw20: cpu-pw20 {
+		cpu_pw15: cpu-pw15 {
 			compatible = "arm,idle-state";
-			idle-state-name = "PW20";
+			idle-state-name = "PW15";
 			arm,psci-suspend-param = <0x0>;
 			entry-latency-us = <2000>;
 			exit-latency-us = <2000>;
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@ -694,7 +694,7 @@ usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@ -710,7 +710,7 @@ usdhc2: mmc@30b50000 {
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@ -724,7 +724,7 @@ usdhc3: mmc@30b60000 {
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@ -569,7 +569,7 @@ usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@ -585,7 +585,7 @@ usdhc2: mmc@30b50000 {
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@ -599,7 +599,7 @@ usdhc3: mmc@30b60000 {
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@ -89,8 +89,8 @@ reg_arm: regulator-arm {
 		regulator-min-microvolt = <900000>;
 		regulator-max-microvolt = <1000000>;
 		gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		states = <1000000 0x0
-		           900000 0x1>;
+		states = <1000000 0x1
+		           900000 0x0>;
 		regulator-always-on;
 	};
 };
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@ -850,7 +850,7 @@ usdhc1: mmc@30b40000 {
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@ -867,7 +867,7 @@ usdhc2: mmc@30b50000 {
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@ -60,11 +60,6 @@ exp_usb3_vbus: usb3-vbus {
 		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
 	};

-	usb3_phy: usb3-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&exp_usb3_vbus>;
-	};
-
 	vsdc_reg: vsdc-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vsdc";
@ -255,10 +250,16 @@ &usb2 {
 	status = "okay";
 };

+&comphy2 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&exp_usb3_vbus>;
+	};
+};
+
 &usb3 {
 	status = "okay";
 	phys = <&comphy2 0>;
-	usb-phy = <&usb3_phy>;
 };

 &mdio {
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@ -44,7 +44,7 @@ edp_panel: edp-panel {
 		power-supply = <&pp3300_disp>;

 		panel-timing {
-			clock-frequency = <266604720>;
+			clock-frequency = <266666667>;
 			hactive = <2400>;
 			hfront-porch = <48>;
 			hback-porch = <84>;
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@ -644,7 +644,7 @@ &u2phy0 {
 	status = "okay";

 	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
+		phy-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};

@ -712,7 +712,7 @@ &usbdrd3_0 {

 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };

 &usbdrd3_1 {
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@ -173,7 +173,7 @@ vdd_log: vdd-log {
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
+		regulator-max-microvolt = <1700000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 };
@ -247,8 +247,8 @@ &i2c0 {
 	rk808: pmic@1b {
 		compatible = "rockchip,rk808";
 		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
@ -574,7 +574,7 @@ pcie_pwr_en: pcie-pwr-en {

 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};

 		vsel1_gpio: vsel1-gpio {
@ -624,7 +624,6 @@ &saradc {

 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
@ -636,8 +635,7 @@ &sdmmc {

 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };
--- a/arch/arm64/include/asm/asm-uaccess.h
+++ b/arch/arm64/include/asm/asm-uaccess.h
@ -78,10 +78,9 @@ alternative_else_nop_endif
 /*
 * Remove the address tag from a virtual address, if present.
 */
-	.macro	clear_address_tag, dst, addr
-	tst	\addr, #(1 << 55)
-	bic	\dst, \addr, #(0xff << 56)
-	csel	\dst, \dst, \addr, eq
+	.macro	untagged_addr, dst, addr
+	sbfx	\dst, \addr, #0, #56
+	and	\dst, \dst, \addr
 	.endm

 #endif
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@ -321,7 +321,8 @@ static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v)
 }

 #define __CMPXCHG_CASE(w, sfx, name, sz, mb, cl...)			\
-static inline u##sz __lse__cmpxchg_case_##name##sz(volatile void *ptr,	\
+static __always_inline u##sz						\
+__lse__cmpxchg_case_##name##sz(volatile void *ptr,			\
 					      u##sz old,		\
 					      u##sz new)		\
 {									\
@ -362,7 +363,8 @@ __CMPXCHG_CASE(x,  ,  mb_, 64, al, "memory")
 #undef __CMPXCHG_CASE

 #define __CMPXCHG_DBL(name, mb, cl...)					\
-static inline long __lse__cmpxchg_double##name(unsigned long old1,	\
+static __always_inline long						\
+__lse__cmpxchg_double##name(unsigned long old1,				\
 					 unsigned long old2,		\
 					 unsigned long new1,		\
 					 unsigned long new2,		\
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@ -52,7 +52,9 @@
 #define ARM64_HAS_IRQ_PRIO_MASKING		42
 #define ARM64_HAS_DCPODP			43
 #define ARM64_WORKAROUND_1463225		44
+#define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM	45
+#define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM	46

-#define ARM64_NCAPS				45
+#define ARM64_NCAPS				47

 #endif /* __ASM_CPUCAPS_H */
--- a/Show More
+++ b/Show More