p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ARM: SoC fixes 

Another batch of fixes for ARM SoC platforms. Most are smaller fixes,
 
 Two areas that are worth pointing out are:
 
 * OMAP had a handful of changes to voltage specs that caused a bit of churn,
   most of volume of change in this branch is due to this.
 
 * There are a couple of _rcuidle fixes from Paul that touch common code and
   came in through the OMAP tree since they were the ones who saw the problems.
 
 The rest is smaller changes across a handful of platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXZjf6AAoJEIwa5zzehBx3ExoP/2eGTZyGUt9DFutZs2OhZRgh
 tI3zBgfPaAEmt+rnvVE3NhDbfjPsV2cANDxE/MaZsFaKkgkHNBbmZpJ3Y7OlgB+k
 3kl4y87Ez1NEJrzQKzqVICzCD3IKA3cxUwUELIp3C7LhnKO1UXmRXp8UXee1Yc1E
 gL23Z2FncrDLOdvVfp/dTj1scB1XQrt3kePSu7sIuyDuGiPLRvO8fNjvIfOQaGDt
 Y27Yk1GrNpvqiOAkziOzUmSGZ6ZZ+wUdUKc/+QcxSnqxrSldtaQDsmmL4z6DQ1xj
 j0jagfVGXNLrCUj0zyWwwPG7pZ37BDJ1mj7AMiX9N7LDQFHR9owEVNf2zd1ar37k
 64Vlz+38m8lXNHM2/gL6gqFZIm0Kjt9C/wrvyealsuflGmx4xMSTRr2yvde5URBO
 diFzee3y2NPhvaRaEd1/yFJ/c0D5bVS8M1lced6GXn/l8SrWjg1SrYZley2PGjQH
 esEr7odTR7Um1UIXalpL1yBxoOVfGJl3bPYe8/veniFSi4DV+yeCOCc6pN0Km4WQ
 huUlzJkIXgtgAUt5gvWAw7sC+qzYPL+qOMAJsfb/vANoGg2QMrt+u9RAWnMKidpo
 GcjKNvAhAmAfwUgVHeLxO714MjIHWhKEVGkGsiDwoLCisn7HTLmaYk8qmOTlExcC
 g/nj7vtaXFfMDcD3uco0
 =C0Az
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another batch of fixes for ARM SoC platforms.  Most are smaller fixes.

  Two areas that are worth pointing out are:

   - OMAP had a handful of changes to voltage specs that caused a bit of
     churn, most of volume of change in this branch is due to this.

   - There are a couple of _rcuidle fixes from Paul that touch common
     code and came in through the OMAP tree since they were the ones who
     saw the problems.

 The rest is smaller changes across a handful of platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
  ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  ARM: OMAP2+: timer: add probe for clocksources
  ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  arm: Use _rcuidle for smp_cross_call() tracepoints
  MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: imx6ul: Fix Micrel PHY mask
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  ARM: dts: socfpga: Add missing PHY phandle
  ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
  ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
  ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
  ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
  ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
  ...
This commit is contained in:
Linus Torvalds 2016-06-18 20:36:17 -10:00
parent c141afd1a2 8fd0976702
commit 049a40c0a2
41 changed files with 252 additions and 136 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
MAINTAINERS
View File

@ -1159,6 +1159,7 @@ F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
M: Shawn Guo <shawnguo@kernel.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Fabio Estevam <fabio.estevam@nxp.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

1
arch/arm/boot/dts/Makefile
View File

@ -741,6 +741,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \

2
arch/arm/boot/dts/am437x-sk-evm.dts
View File

@ -418,7 +418,7 @@ &i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
clock-frequency = <100000>;
tps@24 {
compatible = "ti,tps65218";

32
arch/arm/boot/dts/am57xx-idk-common.dtsi
View File

@ -60,10 +60,26 @@ tps659038: tps659038@58 {
tps659038_pmic {
compatible = "ti,tps659038-pmic";
smps12-in-supply = <&vmain>;
smps3-in-supply = <&vmain>;
smps45-in-supply = <&vmain>;
smps6-in-supply = <&vmain>;
smps7-in-supply = <&vmain>;
smps8-in-supply = <&vmain>;
smps9-in-supply = <&vmain>;
ldo1-in-supply = <&vmain>;
ldo2-in-supply = <&vmain>;
ldo3-in-supply = <&vmain>;
ldo4-in-supply = <&vmain>;
ldo9-in-supply = <&vmain>;
ldoln-in-supply = <&vmain>;
ldousb-in-supply = <&vmain>;
ldortc-in-supply = <&vmain>;
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@ -73,7 +89,6 @@ smps12_reg: smps12 {
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
@ -84,7 +99,6 @@ smps3_reg: smps3 {
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@ -94,7 +108,6 @@ smps45_reg: smps45 {
smps6_reg: smps6 {
/* VDD_GPU */
vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@ -104,7 +117,6 @@ smps6_reg: smps6 {
smps7_reg: smps7 {
/* VDD_CORE */
vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@ -115,13 +127,11 @@ smps7_reg: smps7 {
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -132,7 +142,6 @@ smps9_reg: smps9 {
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@ -142,7 +151,6 @@ ldo1_reg: ldo1 {
ldo2_reg: ldo2 {
/* VDDSH18V */
vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -152,7 +160,6 @@ ldo2_reg: ldo2 {
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -162,7 +169,6 @@ ldo3_reg: ldo3 {
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -174,7 +180,6 @@ ldo4_reg: ldo4 {
ldo9_reg: ldo9 {
/* VDD_RTC */
vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
@ -184,7 +189,6 @@ ldo9_reg: ldo9 {
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -194,7 +198,6 @@ ldoln_reg: ldoln {
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -204,7 +207,6 @@ ldousb_reg: ldousb {
ldortc_reg: ldortc {
/* VDDA_RTC */
vin-supply = <&vmain>;
regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

8
arch/arm/boot/dts/dm8148-evm.dts
View File

@ -93,6 +93,10 @@ partition@0x780000 {
};
};
&mmc1 {
status = "disabled";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pins>;
@ -101,6 +105,10 @@ &mmc2 {
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {
status = "disabled";
};
&pincntl {
sd1_pins: pinmux_sd1_pins {
pinctrl-single,pins = <

9
arch/arm/boot/dts/dm8148-t410.dts
View File

@ -45,6 +45,14 @@ &cpsw_emac1 {
phy-mode = "rgmii";
};
&mmc1 {
status = "disabled";
};
&mmc2 {
status = "disabled";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&sd2_pins>;
@ -53,6 +61,7 @@ &mmc3 {
dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
&edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
dma-names = "tx", "rx";
non-removable;
};
&pincntl {

2
arch/arm/boot/dts/dra7.dtsi
View File

@ -1451,6 +1451,8 @@ gpmc: gpmc@50000000 {
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 4 0>;
dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;

4
arch/arm/boot/dts/dra74x.dtsi
View File

@ -107,8 +107,8 @@ &dss {
reg = <0x58000000 0x80>,
<0x58004054 0x4>,
<0x58004300 0x20>,
<0x58005054 0x4>,
<0x58005300 0x20>;
<0x58009054 0x4>,
<0x58009300 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1",
"pll2_clkctrl", "pll2";

13
arch/arm/boot/dts/exynos5250-snow-common.dtsi
View File

@ -242,7 +242,7 @@ &dp {
hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
ports {
port0 {
port {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
@ -485,13 +485,20 @@ ptn3460: lvds-bridge@20 {
edid-emulation = <5>;
ports {
port0 {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port1 {
port@1 {
reg = <1>;
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};

13
arch/arm/boot/dts/exynos5420-peach-pit.dts
View File

@ -163,7 +163,7 @@ &dp {
hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
port0 {
port {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
@ -631,13 +631,20 @@ ps8625: lvds-bridge@48 {
use-external-pwm;
ports {
port0 {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port1 {
port@1 {
reg = <1>;
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};

2
arch/arm/boot/dts/omap3-evm-37xx.dts
View File

@ -85,7 +85,7 @@ mmc2_pins: pinmux_mmc2_pins {
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;

1
arch/arm/boot/dts/omap3-igep.dtsi
View File

@ -188,6 +188,7 @@ &mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <4>;
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
};
&mmc3 {

11
arch/arm/boot/dts/omap3-igep0020-common.dtsi
View File

@ -194,6 +194,12 @@ OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
>;
};
mmc1_wp_pins: pinmux_mmc1_cd_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
>;
};
};
&i2c3 {
@ -250,3 +256,8 @@ dpi_out: endpoint {
};
};
};
&mmc1 {
pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
};

4
arch/arm/boot/dts/omap3-n900.dts
View File

@ -288,7 +288,7 @@ ssi_pins: pinmux_ssi {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
@ -300,7 +300,7 @@ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
modem_pins: pinmux_modem {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */

6
arch/arm/boot/dts/omap3-n950-n9.dtsi
View File

@ -97,7 +97,7 @@ ssi_pins: pinmux_ssi_pins {
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
@ -110,7 +110,7 @@ ssi_pins_idle: pinmux_ssi_pins_idle {
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
@ -120,7 +120,7 @@ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */
modem_pins1: pinmux_modem_core1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
>;

6
arch/arm/boot/dts/omap3-zoom3.dts
View File

@ -98,7 +98,7 @@ uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
@ -107,7 +107,7 @@ uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
@ -125,7 +125,7 @@ mmc3_2_pins: pinmux_mmc3_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
>;

48
arch/arm/boot/dts/omap5-board-common.dtsi
View File

@ -14,6 +14,29 @@ aliases {
display0 = &hdmi0;
};
vmain: fixedregulator-vmain {
compatible = "regulator-fixed";
regulator-name = "vmain";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vsys_cobra: fixedregulator-vsys_cobra {
compatible = "regulator-fixed";
regulator-name = "vsys_cobra";
vin-supply = <&vmain>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdds_1v8_main: fixedregulator-vdds_1v8_main {
compatible = "regulator-fixed";
regulator-name = "vdds_1v8_main";
vin-supply = <&smps7_reg>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vmmcsd_fixed: fixedregulator-mmcsd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@ -309,7 +332,7 @@ OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
wlcore_irq_pin: pinmux_wlcore_irq_pin {
pinctrl-single,pins = <
OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
>;
};
};
@ -409,6 +432,26 @@ palmas_pmic {
ti,ldo6-vibrator;
smps123-in-supply = <&vsys_cobra>;
smps45-in-supply = <&vsys_cobra>;
smps6-in-supply = <&vsys_cobra>;
smps7-in-supply = <&vsys_cobra>;
smps8-in-supply = <&vsys_cobra>;
smps9-in-supply = <&vsys_cobra>;
smps10_out2-in-supply = <&vsys_cobra>;
smps10_out1-in-supply = <&vsys_cobra>;
ldo1-in-supply = <&vsys_cobra>;
ldo2-in-supply = <&vsys_cobra>;
ldo3-in-supply = <&vdds_1v8_main>;
ldo4-in-supply = <&vdds_1v8_main>;
ldo5-in-supply = <&vsys_cobra>;
ldo6-in-supply = <&vdds_1v8_main>;
ldo7-in-supply = <&vsys_cobra>;
ldo8-in-supply = <&vsys_cobra>;
ldo9-in-supply = <&vmmcsd_fixed>;
ldoln-in-supply = <&vsys_cobra>;
ldousb-in-supply = <&vsys_cobra>;
regulators {
smps123_reg: smps123 {
/* VDD_OPP_MPU */
@ -600,7 +643,8 @@ twl6040: twl@4b {
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
/* audpwron gpio defined in the board specific dts */
vio-supply = <&smps7_reg>;
v2v1-supply = <&smps9_reg>;

26
arch/arm/boot/dts/omap5-igep0050.dts
View File

@ -35,6 +35,22 @@ tca6416: tca6416@21 {
};
};
/* LDO4 is VPP1 - ball AD9 */
&ldo4_reg {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
};
/*
* LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
* VDDA_HDMI - ball AN25
*/
&ldo7_reg {
status = "okay";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
@ -52,3 +68,13 @@ &tpd12s015 {
<&gpio7 3 0>; /* 195, SDA */
};
&twl6040 {
ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */
};
&twl6040_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */
OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
>;
};

10
arch/arm/boot/dts/omap5-uevm.dts
View File

@ -51,3 +51,13 @@ &tpd12s015 {
<&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
<&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
};
&twl6040 {
ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
};
&twl6040_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
>;
};

1
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
View File

@ -136,6 +136,7 @@ regulator-usb-nrst {
&gmac1 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy1>;
snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;

3
arch/arm/boot/dts/stih407-family.dtsi
View File

@ -24,18 +24,21 @@ gp0_reserved: rproc@40000000 {
compatible = "shared-dma-pool";
reg = <0x40000000 0x01000000>;
no-map;
status = "disabled";
};
gp1_reserved: rproc@41000000 {
compatible = "shared-dma-pool";
reg = <0x41000000 0x01000000>;
no-map;
status = "disabled";
};
audio_reserved: rproc@42000000 {
compatible = "shared-dma-pool";
reg = <0x42000000 0x01000000>;
no-map;
status = "disabled";
};
dmu_reserved: rproc@43000000 {

2
arch/arm/boot/dts/sun6i-a31s-primo81.dts
View File

@ -176,8 +176,6 @@ &reg_aldo3 {
};
&reg_dc1sw {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};

2
arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
View File

@ -135,8 +135,6 @@ &reg_aldo3 {
&reg_dc1sw {
regulator-name = "vcc-lcd-usb2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_dc5ldo {

1
arch/arm/configs/exynos_defconfig
View File

@ -82,6 +82,7 @@ CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y

1
arch/arm/configs/multi_v7_defconfig
View File

@ -264,6 +264,7 @@ CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=y

2
arch/arm/kernel/smp.c
View File

@ -486,7 +486,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
{
trace_ipi_raise(target, ipi_types[ipinr]);
trace_ipi_raise_rcuidle(target, ipi_types[ipinr]);
__smp_cross_call(target, ipinr);
}

1
arch/arm/mach-exynos/Kconfig
View File

@ -61,7 +61,6 @@ config ARCH_EXYNOS4
select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select GIC_NON_BANKED
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 (Cortex-A9) SoC based systems

2
arch/arm/mach-imx/mach-imx6ul.c
View File

@ -46,7 +46,7 @@ static int ksz8081_phy_fixup(struct phy_device *dev)
static void __init imx6ul_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ8081, 0xffffffff,
phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
ksz8081_phy_fixup);
}

6
arch/arm/mach-omap1/ams-delta-fiq-handler.S
View File

@ -43,8 +43,8 @@
#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
/* IRQ handler register bitmasks */
#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1)
#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ)
#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1)
/* Driver buffer byte offsets */
#define BUF_MASK (FIQ_MASK * 4)
@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start)
mov r8, #2 @ reset FIQ agreement
str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt?
cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt?
beq gpio @ yes - process it
mov r8, #1

5
arch/arm/mach-omap1/ams-delta-fiq.c
View File

@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void)
* Since no set_type() method is provided by OMAP irq chip,
* switch to edge triggered interrupt type manually.
*/
offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
offset = IRQ_ILR0_REG_OFFSET +
((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4;
val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void)
/*
* Redirect GPIO interrupts to FIQ
*/
offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4;
val = omap_readl(OMAP_IH1_BASE + offset) | 1;
omap_writel(val, OMAP_IH1_BASE + offset);
}

2
arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
View File

@ -14,6 +14,8 @@
#ifndef __AMS_DELTA_FIQ_H
#define __AMS_DELTA_FIQ_H
#include <mach/irqs.h>
/*
* Interrupt number used for passing control from FIQ to IRQ.
* IRQ12, described as reserved, has been selected.

12
arch/arm/mach-omap2/Kconfig
View File

@ -17,6 +17,7 @@ config ARCH_OMAP3
select PM_OPP if PM
select PM if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
select ARM_ERRATA_430973
config ARCH_OMAP4
bool "TI OMAP4"
@ -36,6 +37,7 @@ config ARCH_OMAP4
select PM if CPU_IDLE
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
@ -67,6 +69,8 @@ config SOC_AM43XX
select HAVE_ARM_SCU
select GENERIC_CLOCKEVENTS_BROADCAST
select HAVE_ARM_TWD
select ARM_ERRATA_754322
select ARM_ERRATA_775420
config SOC_DRA7XX
bool "TI DRA7XX"
@ -240,4 +244,12 @@ endmenu
endif
config OMAP5_ERRATA_801819
bool "Errata 801819: An eviction from L1 data cache might stall indefinitely"
depends on SOC_OMAP5 || SOC_DRA7XX
help
A livelock can occur in the L2 cache arbitration that might prevent
a snoop from completing. Under certain conditions this can cause the
system to deadlock.
endmenu

1
arch/arm/mach-omap2/omap-secure.h
View File

@ -46,6 +46,7 @@
#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109
#define OMAP5_MON_AMBA_IF_INDEX 0x108
#define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107
/* Secure PPA(Primary Protected Application) APIs */
#define OMAP4_PPA_L2_POR_INDEX 0x23

48
arch/arm/mach-omap2/omap-smp.c
View File

@ -50,6 +50,39 @@ void __iomem *omap4_get_scu_base(void)
return scu_base;
}
#ifdef CONFIG_OMAP5_ERRATA_801819
void omap5_erratum_workaround_801819(void)
{
u32 acr, revidr;
u32 acr_mask;
/* REVIDR[3] indicates erratum fix available on silicon */
asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr));
if (revidr & (0x1 << 3))
return;
asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
/*
* BIT(27) - Disables streaming. All write-allocate lines allocate in
* the L1 or L2 cache.
* BIT(25) - Disables streaming. All write-allocate lines allocate in
* the L1 cache.
*/
acr_mask = (0x3 << 25) | (0x3 << 27);
/* do we already have it done.. if yes, skip expensive smc */
if ((acr & acr_mask) == acr_mask)
return;
acr |= acr_mask;
omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr);
pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n",
__func__, smp_processor_id());
}
#else
static inline void omap5_erratum_workaround_801819(void) { }
#endif
static void omap4_secondary_init(unsigned int cpu)
{
/*
@ -64,12 +97,15 @@ static void omap4_secondary_init(unsigned int cpu)
omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
4, 0, 0, 0, 0, 0);
/*
* Configure the CNTFRQ register for the secondary cpu's which
* indicates the frequency of the cpu local timers.
*/
if (soc_is_omap54xx() || soc_is_dra7xx())
if (soc_is_omap54xx() || soc_is_dra7xx()) {
/*
* Configure the CNTFRQ register for the secondary cpu's which
* indicates the frequency of the cpu local timers.
*/
set_cntfreq();
/* Configure ACR to disable streaming WA for 801819 */
omap5_erratum_workaround_801819();
}
/*
* Synchronise with the boot thread.
@ -218,6 +254,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
if (cpu_is_omap446x())
startup_addr = omap4460_secondary_startup;
if (soc_is_dra74x() || soc_is_omap54xx())
omap5_erratum_workaround_801819();
/*
* Write the address of secondary startup routine into the

9
arch/arm/mach-omap2/powerdomain.c
View File

@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
trace_state = (PWRDM_TRACE_STATES_FLAG |
((next & OMAP_POWERSTATE_MASK) << 8) |
((prev & OMAP_POWERSTATE_MASK) << 0));
trace_power_domain_target(pwrdm->name, trace_state,
smp_processor_id());
trace_power_domain_target_rcuidle(pwrdm->name,
trace_state,
smp_processor_id());
}
break;
default:
@ -523,8 +524,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
/* Trace the pwrdm desired target state */
trace_power_domain_target(pwrdm->name, pwrst,
smp_processor_id());
trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
smp_processor_id());
/* Program the pwrdm desired target state */
ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
}

76
arch/arm/mach-omap2/powerdomains7xx_data.c
View File

@ -36,14 +36,7 @@ static struct powerdomain iva_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IVA_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* hwa_mem */
[1] = PWRSTS_OFF_RET, /* sl2_mem */
[2] = PWRSTS_OFF_RET, /* tcm1_mem */
[3] = PWRSTS_OFF_RET, /* tcm2_mem */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* hwa_mem */
[1] = PWRSTS_ON, /* sl2_mem */
@ -76,12 +69,7 @@ static struct powerdomain ipu_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* aessmem */
[1] = PWRSTS_OFF_RET, /* periphmem */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* aessmem */
[1] = PWRSTS_ON, /* periphmem */
@ -95,11 +83,7 @@ static struct powerdomain dss_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_DSS_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* dss_mem */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* dss_mem */
},
@ -111,13 +95,8 @@ static struct powerdomain l4per_7xx_pwrdm = {
.name = "l4per_pwrdm",
.prcm_offs = DRA7XX_PRM_L4PER_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.pwrsts = PWRSTS_ON,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* nonretained_bank */
[1] = PWRSTS_OFF_RET, /* retained_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* nonretained_bank */
[1] = PWRSTS_ON, /* retained_bank */
@ -132,9 +111,6 @@ static struct powerdomain gpu_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* gpu_mem */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* gpu_mem */
},
@ -148,8 +124,6 @@ static struct powerdomain wkupaon_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* wkup_bank */
},
@ -161,15 +135,7 @@ static struct powerdomain core_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
[1] = PWRSTS_OFF_RET, /* core_ocmram */
[2] = PWRSTS_OFF_RET, /* core_other_bank */
[3] = PWRSTS_OFF_RET, /* ipu_l2ram */
[4] = PWRSTS_OFF_RET, /* ipu_unicache */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* core_nret_bank */
[1] = PWRSTS_ON, /* core_ocmram */
@ -226,11 +192,7 @@ static struct powerdomain vpe_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_VPE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* vpe_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* vpe_bank */
},
@ -260,14 +222,8 @@ static struct powerdomain l3init_7xx_pwrdm = {
.name = "l3init_pwrdm",
.prcm_offs = DRA7XX_PRM_L3INIT_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.pwrsts = PWRSTS_ON,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* gmac_bank */
[1] = PWRSTS_OFF_RET, /* l3init_bank1 */
[2] = PWRSTS_OFF_RET, /* l3init_bank2 */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* gmac_bank */
[1] = PWRSTS_ON, /* l3init_bank1 */
@ -283,9 +239,6 @@ static struct powerdomain eve3_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* eve3_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve3_bank */
},
@ -299,9 +252,6 @@ static struct powerdomain emu_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* emu_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* emu_bank */
},
@ -314,11 +264,6 @@ static struct powerdomain dsp2_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* dsp2_edma */
[1] = PWRSTS_OFF_RET, /* dsp2_l1 */
[2] = PWRSTS_OFF_RET, /* dsp2_l2 */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* dsp2_edma */
[1] = PWRSTS_ON, /* dsp2_l1 */
@ -334,11 +279,6 @@ static struct powerdomain dsp1_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* dsp1_edma */
[1] = PWRSTS_OFF_RET, /* dsp1_l1 */
[2] = PWRSTS_OFF_RET, /* dsp1_l2 */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* dsp1_edma */
[1] = PWRSTS_ON, /* dsp1_l1 */
@ -354,9 +294,6 @@ static struct powerdomain cam_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* vip_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* vip_bank */
},
@ -370,9 +307,6 @@ static struct powerdomain eve4_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* eve4_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve4_bank */
},
@ -386,9 +320,6 @@ static struct powerdomain eve2_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* eve2_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve2_bank */
},
@ -402,9 +333,6 @@ static struct powerdomain eve1_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* eve1_bank */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve1_bank */
},

7
arch/arm/mach-omap2/timer.c
View File

@ -496,8 +496,7 @@ void __init omap_init_time(void)
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
2, "timer_sys_ck", NULL, false);
if (of_have_populated_dt())
clocksource_probe();
clocksource_probe();
}
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
@ -505,6 +504,8 @@ void __init omap3_secure_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
2, "timer_sys_ck", NULL, false);
clocksource_probe();
}
#endif /* CONFIG_ARCH_OMAP3 */
@ -513,6 +514,8 @@ void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon", true);
clocksource_probe();
}
#endif

2
arch/arm/plat-samsung/devs.c
View File

@ -68,7 +68,7 @@
#include <linux/platform_data/asoc-s3c.h>
#include <linux/platform_data/spi-s3c64xx.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
/* AC97 */
#ifdef CONFIG_CPU_S3C2440

2
arch/arm64/boot/dts/lg/lg1312.dtsi
View File

@ -125,7 +125,7 @@ amba {
#size-cells = <1>;
#interrupts-cells = <3>;
compatible = "arm,amba-bus";
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;

2
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View File

@ -163,7 +163,7 @@ xin24m: xin24m {
};
amba {
compatible = "arm,amba-bus";
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;

2
drivers/memory/omap-gpmc.c
View File

@ -398,7 +398,7 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay);
GPMC_CONFIG4_WEEXTRADELAY, p->we_extra_delay);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
GPMC_CONFIG6_CYCLE2CYCLESAMECSEN,
p->cycle2cyclesamecsen);