drm/i915/dsi: remove intel_dsi_cmd.c and the unused functions therein

The removed functions can be resurrected in intel_dsi.c as need arises.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Jani Nikula 2015-01-16 14:27:27 +02:00 committed by Daniel Vetter
parent a2581a9e7c
commit 063c86f60a
4 changed files with 0 additions and 120 deletions

View File

@ -72,7 +72,6 @@ i915-y += dvo_ch7017.o \
intel_ddi.o \
intel_dp.o \
intel_dp_mst.o \
intel_dsi_cmd.o \
intel_dsi.o \
intel_dsi_pll.o \
intel_dsi_panel_vbt.o \

View File

@ -34,7 +34,6 @@
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
#include "intel_dsi_cmd.h"
static const struct {
u16 panel_id;

View File

@ -1,117 +0,0 @@
/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Jani Nikula <jani.nikula@intel.com>
*/
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
#include "intel_dsi_cmd.h"
/*
* XXX: MIPI_DATA_ADDRESS, MIPI_DATA_LENGTH, MIPI_COMMAND_LENGTH, and
* MIPI_COMMAND_ADDRESS registers.
*
* Apparently these registers provide a MIPI adapter level way to send (lots of)
* commands and data to the receiver, without having to write the commands and
* data to MIPI_{HS,LP}_GEN_{CTRL,DATA} registers word by word.
*
* Presumably for anything other than MIPI_DCS_WRITE_MEMORY_START and
* MIPI_DCS_WRITE_MEMORY_CONTINUE (which are used to update the external
* framebuffer in command mode displays) these are just an optimization that can
* come later.
*
* For memory writes, these should probably be used for performance.
*/
static void print_stat(struct intel_dsi *intel_dsi, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val;
val = I915_READ(MIPI_INTR_STAT(port));
#define STAT_BIT(val, bit) (val) & (bit) ? " " #bit : ""
DRM_DEBUG_KMS("MIPI_INTR_STAT(%c) = %08x"
"%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s"
"\n", port_name(port), val,
STAT_BIT(val, TEARING_EFFECT),
STAT_BIT(val, SPL_PKT_SENT_INTERRUPT),
STAT_BIT(val, GEN_READ_DATA_AVAIL),
STAT_BIT(val, LP_GENERIC_WR_FIFO_FULL),
STAT_BIT(val, HS_GENERIC_WR_FIFO_FULL),
STAT_BIT(val, RX_PROT_VIOLATION),
STAT_BIT(val, RX_INVALID_TX_LENGTH),
STAT_BIT(val, ACK_WITH_NO_ERROR),
STAT_BIT(val, TURN_AROUND_ACK_TIMEOUT),
STAT_BIT(val, LP_RX_TIMEOUT),
STAT_BIT(val, HS_TX_TIMEOUT),
STAT_BIT(val, DPI_FIFO_UNDERRUN),
STAT_BIT(val, LOW_CONTENTION),
STAT_BIT(val, HIGH_CONTENTION),
STAT_BIT(val, TXDSI_VC_ID_INVALID),
STAT_BIT(val, TXDSI_DATA_TYPE_NOT_RECOGNISED),
STAT_BIT(val, TXCHECKSUM_ERROR),
STAT_BIT(val, TXECC_MULTIBIT_ERROR),
STAT_BIT(val, TXECC_SINGLE_BIT_ERROR),
STAT_BIT(val, TXFALSE_CONTROL_ERROR),
STAT_BIT(val, RXDSI_VC_ID_INVALID),
STAT_BIT(val, RXDSI_DATA_TYPE_NOT_REGOGNISED),
STAT_BIT(val, RXCHECKSUM_ERROR),
STAT_BIT(val, RXECC_MULTIBIT_ERROR),
STAT_BIT(val, RXECC_SINGLE_BIT_ERROR),
STAT_BIT(val, RXFALSE_CONTROL_ERROR),
STAT_BIT(val, RXHS_RECEIVE_TIMEOUT_ERROR),
STAT_BIT(val, RX_LP_TX_SYNC_ERROR),
STAT_BIT(val, RXEXCAPE_MODE_ENTRY_ERROR),
STAT_BIT(val, RXEOT_SYNC_ERROR),
STAT_BIT(val, RXSOT_SYNC_ERROR),
STAT_BIT(val, RXSOT_ERROR));
#undef STAT_BIT
}
/* enable or disable command mode hs transmissions */
void dsi_hs_mode_enable(struct intel_dsi *intel_dsi, bool enable,
enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 temp;
u32 mask = DBI_FIFO_EMPTY;
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(port)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for DBI FIFO empty\n");
temp = I915_READ(MIPI_HS_LP_DBI_ENABLE(port));
temp &= DBI_HS_LP_MODE_MASK;
I915_WRITE(MIPI_HS_LP_DBI_ENABLE(port), enable ? DBI_HS_MODE : DBI_LP_MODE);
intel_dsi->hs = enable;
}

View File

@ -36,7 +36,6 @@
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
#include "intel_dsi_cmd.h"
struct vbt_panel {
struct drm_panel panel;