[media] rc: change wakeup_protocols to list all protocol variants

For IR wakeup, a driver has to program the hardware to wakeup at a
specific IR sequence, so it makes no sense to allow multiple wakeup
protocols to be selected. In the same manner the sysfs interface only
allows one scancode to be provided.

In addition, we need to know the specific variant of the protocol.

In short, these changes are made to the wakeup_protocols sysfs entry:
 - list all the protocol variants rather than the protocol groups,
   e.g. "nec nec-x nec-32" rather than just "nec".
 - only allow one protocol variant to be selected rather than multiple
 - wakeup_filter can only be set once a protocol has been selected in
   wakeup_protocols.

This is an API change, however the only user of this API is the img-ir,
but the wakeup code was never merged to mainline, so it was never used.

Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Sean Young 2016-12-05 17:08:35 -02:00 committed by Mauro Carvalho Chehab
parent 0fcd3f0a3f
commit 0751d33c27
8 changed files with 262 additions and 91 deletions

View File

@ -62,18 +62,18 @@ Description:
This value may be reset to 0 if the current protocol is altered.
What: /sys/class/rc/rcN/wakeup_protocols
Date: Feb 2014
KernelVersion: 3.15
Date: Feb 2017
KernelVersion: 4.11
Contact: Mauro Carvalho Chehab <m.chehab@samsung.com>
Description:
Reading this file returns a list of available protocols to use
for the wakeup filter, something like:
"rc5 rc6 nec jvc [sony]"
"rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
Note that protocol variants are listed, so "nec", "sony",
"rc-5", "rc-6" have their different bit length encodings
listed if available.
The enabled wakeup protocol is shown in [] brackets.
Writing "+proto" will add a protocol to the list of enabled
wakeup protocols.
Writing "-proto" will remove a protocol from the list of enabled
wakeup protocols.
Only one protocol can be selected at a time.
Writing "proto" will use "proto" for wakeup events.
Writing "none" will disable wakeup.
Write fails with EINVAL if an invalid protocol combination or

View File

@ -92,15 +92,16 @@ This value may be reset to 0 if the current protocol is altered.
Reading this file returns a list of available protocols to use for the
wakeup filter, something like:
``rc5 rc6 nec jvc [sony]``
``rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce``
Note that protocol variants are listed, so "nec", "sony", "rc-5", "rc-6"
have their different bit length encodings listed if available.
Note that all protocol variants are listed.
The enabled wakeup protocol is shown in [] brackets.
Writing "+proto" will add a protocol to the list of enabled wakeup
protocols.
Writing "-proto" will remove a protocol from the list of enabled wakeup
protocols.
Only one protocol can be selected at a time.
Writing "proto" will use "proto" for wakeup events.

View File

@ -488,7 +488,15 @@ static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type,
/* convert scancode filter to raw filter */
filter.minlen = 0;
filter.maxlen = ~0;
ret = hw->decoder->filter(sc_filter, &filter, hw->enabled_protocols);
if (type == RC_FILTER_NORMAL) {
/* guess scancode from protocol */
ret = hw->decoder->filter(sc_filter, &filter,
dev->enabled_protocols);
} else {
/* for wakeup user provided exact protocol variant */
ret = hw->decoder->filter(sc_filter, &filter,
1ULL << dev->wakeup_protocol);
}
if (ret)
goto unlock;
dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n",
@ -581,6 +589,7 @@ static void img_ir_set_decoder(struct img_ir_priv *priv,
/* clear the wakeup scancode filter */
rdev->scancode_wakeup_filter.data = 0;
rdev->scancode_wakeup_filter.mask = 0;
rdev->wakeup_protocol = RC_TYPE_UNKNOWN;
/* clear raw filters */
_img_ir_set_filter(priv, NULL);
@ -685,7 +694,6 @@ static int img_ir_change_protocol(struct rc_dev *dev, u64 *ir_type)
if (!hw->decoder || !hw->decoder->filter)
wakeup_protocols = 0;
rdev->allowed_wakeup_protocols = wakeup_protocols;
rdev->enabled_wakeup_protocols = wakeup_protocols;
return 0;
}
@ -701,7 +709,6 @@ static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto)
mutex_lock(&rdev->lock);
rdev->enabled_protocols = proto;
rdev->allowed_wakeup_protocols = proto;
rdev->enabled_wakeup_protocols = proto;
mutex_unlock(&rdev->lock);
}

View File

@ -11,6 +11,7 @@
#include "img-ir-hw.h"
#include <linux/bitrev.h>
#include <linux/log2.h>
/* Convert NEC data to a scancode */
static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols,
@ -62,7 +63,23 @@ static int img_ir_nec_filter(const struct rc_scancode_filter *in,
data = in->data & 0xff;
data_m = in->mask & 0xff;
if ((in->data | in->mask) & 0xff000000) {
protocols &= RC_BIT_NEC | RC_BIT_NECX | RC_BIT_NEC32;
/*
* If only one bit is set, we were requested to do an exact
* protocol. This should be the case for wakeup filters; for
* normal filters, guess the protocol from the scancode.
*/
if (!is_power_of_2(protocols)) {
if ((in->data | in->mask) & 0xff000000)
protocols = RC_BIT_NEC32;
else if ((in->data | in->mask) & 0x00ff0000)
protocols = RC_BIT_NECX;
else
protocols = RC_BIT_NEC;
}
if (protocols == RC_BIT_NEC32) {
/* 32-bit NEC (used by Apple and TiVo remotes) */
/* scan encoding: as transmitted, MSBit = first received bit */
addr = bitrev8(in->data >> 24);
@ -73,7 +90,7 @@ static int img_ir_nec_filter(const struct rc_scancode_filter *in,
data_m = bitrev8(in->mask >> 8);
data_inv = bitrev8(in->data >> 0);
data_inv_m = bitrev8(in->mask >> 0);
} else if ((in->data | in->mask) & 0x00ff0000) {
} else if (protocols == RC_BIT_NECX) {
/* Extended NEC */
/* scan encoding AAaaDD */
addr = (in->data >> 16) & 0xff;

View File

@ -68,19 +68,29 @@ static int img_ir_sony_filter(const struct rc_scancode_filter *in,
func = (in->data >> 0) & 0x7f;
func_m = (in->mask >> 0) & 0x7f;
if (subdev & subdev_m) {
protocols &= RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20;
/*
* If only one bit is set, we were requested to do an exact
* protocol. This should be the case for wakeup filters; for
* normal filters, guess the protocol from the scancode.
*/
if (!is_power_of_2(protocols)) {
if (subdev & subdev_m)
protocols = RC_BIT_SONY20;
else if (dev & dev_m & 0xe0)
protocols = RC_BIT_SONY15;
else
protocols = RC_BIT_SONY12;
}
if (protocols == RC_BIT_SONY20) {
/* can't encode subdev and higher device bits */
if (dev & dev_m & 0xe0)
return -EINVAL;
/* subdevice (extended) bits only in 20 bit encoding */
if (!(protocols & RC_BIT_SONY20))
return -EINVAL;
len = 20;
dev_m &= 0x1f;
} else if (dev & dev_m & 0xe0) {
/* upper device bits only in 15 bit encoding */
if (!(protocols & RC_BIT_SONY15))
return -EINVAL;
} else if (protocols == RC_BIT_SONY15) {
len = 15;
subdev_m = 0;
} else {

View File

@ -235,7 +235,6 @@ static void ir_raw_disable_protocols(struct rc_dev *dev, u64 protocols)
{
mutex_lock(&dev->lock);
dev->enabled_protocols &= ~protocols;
dev->enabled_wakeup_protocols &= ~protocols;
mutex_unlock(&dev->lock);
}

View File

@ -830,11 +830,6 @@ struct rc_filter_attribute {
};
#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr)
#define RC_PROTO_ATTR(_name, _mode, _show, _store, _type) \
struct rc_filter_attribute dev_attr_##_name = { \
.attr = __ATTR(_name, _mode, _show, _store), \
.type = (_type), \
}
#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask) \
struct rc_filter_attribute dev_attr_##_name = { \
.attr = __ATTR(_name, _mode, _show, _store), \
@ -860,13 +855,13 @@ static bool lirc_is_present(void)
}
/**
* show_protocols() - shows the current/wakeup IR protocol(s)
* show_protocols() - shows the current IR protocol(s)
* @device: the device descriptor
* @mattr: the device attribute struct
* @buf: a pointer to the output buffer
*
* This routine is a callback routine for input read the IR protocol type(s).
* it is trigged by reading /sys/class/rc/rc?/[wakeup_]protocols.
* it is trigged by reading /sys/class/rc/rc?/protocols.
* It returns the protocol names of supported protocols.
* Enabled protocols are printed in brackets.
*
@ -877,7 +872,6 @@ static ssize_t show_protocols(struct device *device,
struct device_attribute *mattr, char *buf)
{
struct rc_dev *dev = to_rc_dev(device);
struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
u64 allowed, enabled;
char *tmp = buf;
int i;
@ -891,15 +885,10 @@ static ssize_t show_protocols(struct device *device,
mutex_lock(&dev->lock);
if (fattr->type == RC_FILTER_NORMAL) {
enabled = dev->enabled_protocols;
allowed = dev->allowed_protocols;
if (dev->raw && !allowed)
allowed = ir_raw_get_allowed_protocols();
} else {
enabled = dev->enabled_wakeup_protocols;
allowed = dev->allowed_wakeup_protocols;
}
enabled = dev->enabled_protocols;
allowed = dev->allowed_protocols;
if (dev->raw && !allowed)
allowed = ir_raw_get_allowed_protocols();
mutex_unlock(&dev->lock);
@ -1058,11 +1047,8 @@ static ssize_t store_protocols(struct device *device,
const char *buf, size_t len)
{
struct rc_dev *dev = to_rc_dev(device);
struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
u64 *current_protocols;
int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
struct rc_scancode_filter *filter;
int (*set_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter);
u64 old_protocols, new_protocols;
ssize_t rc;
@ -1073,21 +1059,11 @@ static ssize_t store_protocols(struct device *device,
if (!atomic_read(&dev->initialized))
return -ERESTARTSYS;
if (fattr->type == RC_FILTER_NORMAL) {
IR_dprintk(1, "Normal protocol change requested\n");
current_protocols = &dev->enabled_protocols;
change_protocol = dev->change_protocol;
filter = &dev->scancode_filter;
set_filter = dev->s_filter;
} else {
IR_dprintk(1, "Wakeup protocol change requested\n");
current_protocols = &dev->enabled_wakeup_protocols;
change_protocol = dev->change_wakeup_protocol;
filter = &dev->scancode_wakeup_filter;
set_filter = dev->s_wakeup_filter;
}
IR_dprintk(1, "Normal protocol change requested\n");
current_protocols = &dev->enabled_protocols;
filter = &dev->scancode_filter;
if (!change_protocol) {
if (!dev->change_protocol) {
IR_dprintk(1, "Protocol switching not supported\n");
return -EINVAL;
}
@ -1100,7 +1076,7 @@ static ssize_t store_protocols(struct device *device,
if (rc < 0)
goto out;
rc = change_protocol(dev, &new_protocols);
rc = dev->change_protocol(dev, &new_protocols);
if (rc < 0) {
IR_dprintk(1, "Error setting protocols to 0x%llx\n",
(long long)new_protocols);
@ -1123,16 +1099,16 @@ static ssize_t store_protocols(struct device *device,
* Try setting the same filter with the new protocol (if any).
* Fall back to clearing the filter.
*/
if (set_filter && filter->mask) {
if (dev->s_filter && filter->mask) {
if (new_protocols)
rc = set_filter(dev, filter);
rc = dev->s_filter(dev, filter);
else
rc = -1;
if (rc < 0) {
filter->data = 0;
filter->mask = 0;
set_filter(dev, filter);
dev->s_filter(dev, filter);
}
}
@ -1221,7 +1197,6 @@ static ssize_t store_filter(struct device *device,
int ret;
unsigned long val;
int (*set_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter);
u64 *enabled_protocols;
/* Device is being removed */
if (!dev)
@ -1236,11 +1211,9 @@ static ssize_t store_filter(struct device *device,
if (fattr->type == RC_FILTER_NORMAL) {
set_filter = dev->s_filter;
enabled_protocols = &dev->enabled_protocols;
filter = &dev->scancode_filter;
} else {
set_filter = dev->s_wakeup_filter;
enabled_protocols = &dev->enabled_wakeup_protocols;
filter = &dev->scancode_wakeup_filter;
}
@ -1255,7 +1228,16 @@ static ssize_t store_filter(struct device *device,
else
new_filter.data = val;
if (!*enabled_protocols && val) {
if (fattr->type == RC_FILTER_WAKEUP) {
/* refuse to set a filter unless a protocol is enabled */
if (dev->wakeup_protocol == RC_TYPE_UNKNOWN) {
ret = -EINVAL;
goto unlock;
}
}
if (fattr->type == RC_FILTER_NORMAL && !dev->enabled_protocols &&
val) {
/* refuse to set a filter unless a protocol is enabled */
ret = -EINVAL;
goto unlock;
@ -1272,6 +1254,172 @@ static ssize_t store_filter(struct device *device,
return (ret < 0) ? ret : len;
}
/*
* This is the list of all variants of all protocols, which is used by
* the wakeup_protocols sysfs entry. In the protocols sysfs entry some
* some protocols are grouped together (e.g. nec = nec + necx + nec32).
*
* For wakeup we need to know the exact protocol variant so the hardware
* can be programmed exactly what to expect.
*/
static const char * const proto_variant_names[] = {
[RC_TYPE_UNKNOWN] = "unknown",
[RC_TYPE_OTHER] = "other",
[RC_TYPE_RC5] = "rc-5",
[RC_TYPE_RC5X_20] = "rc-5x-20",
[RC_TYPE_RC5_SZ] = "rc-5-sz",
[RC_TYPE_JVC] = "jvc",
[RC_TYPE_SONY12] = "sony-12",
[RC_TYPE_SONY15] = "sony-15",
[RC_TYPE_SONY20] = "sony-20",
[RC_TYPE_NEC] = "nec",
[RC_TYPE_NECX] = "nec-x",
[RC_TYPE_NEC32] = "nec-32",
[RC_TYPE_SANYO] = "sanyo",
[RC_TYPE_MCE_KBD] = "mce_kbd",
[RC_TYPE_RC6_0] = "rc-6-0",
[RC_TYPE_RC6_6A_20] = "rc-6-6a-20",
[RC_TYPE_RC6_6A_24] = "rc-6-6a-24",
[RC_TYPE_RC6_6A_32] = "rc-6-6a-32",
[RC_TYPE_RC6_MCE] = "rc-6-mce",
[RC_TYPE_SHARP] = "sharp",
[RC_TYPE_XMP] = "xmp",
[RC_TYPE_CEC] = "cec",
};
/**
* show_wakeup_protocols() - shows the wakeup IR protocol
* @device: the device descriptor
* @mattr: the device attribute struct
* @buf: a pointer to the output buffer
*
* This routine is a callback routine for input read the IR protocol type(s).
* it is trigged by reading /sys/class/rc/rc?/wakeup_protocols.
* It returns the protocol names of supported protocols.
* The enabled protocols are printed in brackets.
*
* dev->lock is taken to guard against races between device
* registration, store_protocols and show_protocols.
*/
static ssize_t show_wakeup_protocols(struct device *device,
struct device_attribute *mattr,
char *buf)
{
struct rc_dev *dev = to_rc_dev(device);
u64 allowed;
enum rc_type enabled;
char *tmp = buf;
int i;
/* Device is being removed */
if (!dev)
return -EINVAL;
if (!atomic_read(&dev->initialized))
return -ERESTARTSYS;
mutex_lock(&dev->lock);
allowed = dev->allowed_wakeup_protocols;
enabled = dev->wakeup_protocol;
mutex_unlock(&dev->lock);
IR_dprintk(1, "%s: allowed - 0x%llx, enabled - %d\n",
__func__, (long long)allowed, enabled);
for (i = 0; i < ARRAY_SIZE(proto_variant_names); i++) {
if (allowed & (1ULL << i)) {
if (i == enabled)
tmp += sprintf(tmp, "[%s] ",
proto_variant_names[i]);
else
tmp += sprintf(tmp, "%s ",
proto_variant_names[i]);
}
}
if (tmp != buf)
tmp--;
*tmp = '\n';
return tmp + 1 - buf;
}
/**
* store_wakeup_protocols() - changes the wakeup IR protocol(s)
* @device: the device descriptor
* @mattr: the device attribute struct
* @buf: a pointer to the input buffer
* @len: length of the input buffer
*
* This routine is for changing the IR protocol type.
* It is trigged by writing to /sys/class/rc/rc?/wakeup_protocols.
* Returns @len on success or a negative error code.
*
* dev->lock is taken to guard against races between device
* registration, store_protocols and show_protocols.
*/
static ssize_t store_wakeup_protocols(struct device *device,
struct device_attribute *mattr,
const char *buf, size_t len)
{
struct rc_dev *dev = to_rc_dev(device);
enum rc_type protocol;
ssize_t rc;
u64 allowed;
int i;
/* Device is being removed */
if (!dev)
return -EINVAL;
if (!atomic_read(&dev->initialized))
return -ERESTARTSYS;
mutex_lock(&dev->lock);
allowed = dev->allowed_wakeup_protocols;
if (sysfs_streq(buf, "none")) {
protocol = RC_TYPE_UNKNOWN;
} else {
for (i = 0; i < ARRAY_SIZE(proto_variant_names); i++) {
if ((allowed & (1ULL << i)) &&
sysfs_streq(buf, proto_variant_names[i])) {
protocol = i;
break;
}
}
if (i == ARRAY_SIZE(proto_variant_names)) {
rc = -EINVAL;
goto out;
}
}
if (dev->wakeup_protocol != protocol) {
dev->wakeup_protocol = protocol;
IR_dprintk(1, "Wakeup protocol changed to %d\n", protocol);
if (protocol == RC_TYPE_RC6_MCE)
dev->scancode_wakeup_filter.data = 0x800f0000;
else
dev->scancode_wakeup_filter.data = 0;
dev->scancode_wakeup_filter.mask = 0;
rc = dev->s_wakeup_filter(dev, &dev->scancode_wakeup_filter);
if (rc == 0)
rc = len;
} else {
rc = len;
}
out:
mutex_unlock(&dev->lock);
return rc;
}
static void rc_dev_release(struct device *device)
{
struct rc_dev *dev = to_rc_dev(device);
@ -1301,10 +1449,9 @@ static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
/*
* Static device attribute struct with the sysfs attributes for IR's
*/
static RC_PROTO_ATTR(protocols, S_IRUGO | S_IWUSR,
show_protocols, store_protocols, RC_FILTER_NORMAL);
static RC_PROTO_ATTR(wakeup_protocols, S_IRUGO | S_IWUSR,
show_protocols, store_protocols, RC_FILTER_WAKEUP);
static DEVICE_ATTR(protocols, 0644, show_protocols, store_protocols);
static DEVICE_ATTR(wakeup_protocols, 0644, show_wakeup_protocols,
store_wakeup_protocols);
static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR,
show_filter, store_filter, RC_FILTER_NORMAL, false);
static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR,
@ -1315,7 +1462,7 @@ static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR,
show_filter, store_filter, RC_FILTER_WAKEUP, true);
static struct attribute *rc_dev_protocol_attrs[] = {
&dev_attr_protocols.attr.attr,
&dev_attr_protocols.attr,
NULL,
};
@ -1323,15 +1470,6 @@ static struct attribute_group rc_dev_protocol_attr_grp = {
.attrs = rc_dev_protocol_attrs,
};
static struct attribute *rc_dev_wakeup_protocol_attrs[] = {
&dev_attr_wakeup_protocols.attr.attr,
NULL,
};
static struct attribute_group rc_dev_wakeup_protocol_attr_grp = {
.attrs = rc_dev_wakeup_protocol_attrs,
};
static struct attribute *rc_dev_filter_attrs[] = {
&dev_attr_filter.attr.attr,
&dev_attr_filter_mask.attr.attr,
@ -1345,6 +1483,7 @@ static struct attribute_group rc_dev_filter_attr_grp = {
static struct attribute *rc_dev_wakeup_filter_attrs[] = {
&dev_attr_wakeup_filter.attr.attr,
&dev_attr_wakeup_filter_mask.attr.attr,
&dev_attr_wakeup_protocols.attr,
NULL,
};
@ -1475,8 +1614,6 @@ int rc_register_device(struct rc_dev *dev)
dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
if (dev->s_wakeup_filter)
dev->sysfs_groups[attr++] = &rc_dev_wakeup_filter_attr_grp;
if (dev->change_wakeup_protocol)
dev->sysfs_groups[attr++] = &rc_dev_wakeup_protocol_attr_grp;
dev->sysfs_groups[attr++] = NULL;
rc = device_add(&dev->dev);

View File

@ -86,7 +86,8 @@ enum rc_filter_type {
* @allowed_protocols: bitmask with the supported RC_BIT_* protocols
* @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
* @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols
* @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols
* @wakeup_protocol: the enabled RC_TYPE_* wakeup protocol or
* RC_TYPE_UNKNOWN if disabled.
* @scancode_filter: scancode filter
* @scancode_wakeup_filter: scancode wakeup filters
* @scancode_mask: some hardware decoders are not capable of providing the full
@ -110,8 +111,6 @@ enum rc_filter_type {
* @rx_resolution : resolution (in ns) of input sampler
* @tx_resolution: resolution (in ns) of output sampler
* @change_protocol: allow changing the protocol used on hardware decoders
* @change_wakeup_protocol: allow changing the protocol used for wakeup
* filtering
* @open: callback to allow drivers to enable polling/irq when IR input device
* is opened.
* @close: callback to allow drivers to disable polling/irq when IR input device
@ -126,7 +125,9 @@ enum rc_filter_type {
* @s_learning_mode: enable wide band receiver used for learning
* @s_carrier_report: enable carrier reports
* @s_filter: set the scancode filter
* @s_wakeup_filter: set the wakeup scancode filter
* @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero
* then wakeup should be disabled. wakeup_protocol will be set to
* a valid protocol if mask is nonzero.
* @s_timeout: set hardware timeout in ns
*/
struct rc_dev {
@ -149,7 +150,7 @@ struct rc_dev {
u64 allowed_protocols;
u64 enabled_protocols;
u64 allowed_wakeup_protocols;
u64 enabled_wakeup_protocols;
enum rc_type wakeup_protocol;
struct rc_scancode_filter scancode_filter;
struct rc_scancode_filter scancode_wakeup_filter;
u32 scancode_mask;
@ -169,7 +170,6 @@ struct rc_dev {
u32 rx_resolution;
u32 tx_resolution;
int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type);
int (*open)(struct rc_dev *dev);
void (*close)(struct rc_dev *dev);
int (*s_tx_mask)(struct rc_dev *dev, u32 mask);