p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

skge: Rename LED_OFF and LED_ON in marvel skge driver to avoid conflicts with leds namespace 

Adding led support for phy causes namespace conflicts for some
phy drivers.

The marvel skge driver declared an enum for representing the states of
Link LED Register. The enum contained constant LED_OFF which conflicted
with declartation found in linux/leds.h.
LED_OFF changed to LED_REG_OFF
Also changed LED_ON to LED_REG_ON to avoid possible future conflict and
for consistency.

Signed-off-by: Zach Brown <zach.brown@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Zach Brown 2016-10-17 10:49:52 -05:00 committed by David S. Miller
parent 5bb61cb5fd
commit 0e0f27dd65
2 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/net/ethernet/marvell/skge.c
View File

@ -1048,7 +1048,7 @@ static const char *skge_pause(enum pause_status status)
static void skge_link_up(struct skge_port *skge)
{
skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG),
LED_BLK_OFF|LED_SYNC_OFF|LED_ON);
LED_BLK_OFF|LED_SYNC_OFF|LED_REG_ON);
netif_carrier_on(skge->netdev);
netif_wake_queue(skge->netdev);
@ -1062,7 +1062,7 @@ static void skge_link_up(struct skge_port *skge)
static void skge_link_down(struct skge_port *skge)
{
skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF);
skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_REG_OFF);
netif_carrier_off(skge->netdev);
netif_stop_queue(skge->netdev);
@ -2668,7 +2668,7 @@ static int skge_down(struct net_device *dev)
if (hw->ports == 1)
free_irq(hw->pdev->irq, hw);
skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF);
skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_REG_OFF);
if (is_genesis(hw))
genesis_stop(skge);
else

4
drivers/net/ethernet/marvell/skge.h
View File

@ -662,8 +662,8 @@ enum {
LED_BLK_OFF = 1<<4, /* Link LED Blinking Off */
LED_SYNC_ON = 1<<3, /* Use Sync Wire to switch LED */
LED_SYNC_OFF = 1<<2, /* Disable Sync Wire Input */
LED_ON = 1<<1, /* switch LED on */
LED_OFF = 1<<0, /* switch LED off */
LED_REG_ON = 1<<1, /* switch LED on */
LED_REG_OFF = 1<<0, /* switch LED off */
};
/* Receive GMAC FIFO (YUKON) */