m5602_ov9650: move skeletons to the .c file
The header file has some private static structures that are used only by the C file. Move those structures to the C file, in order to shut up gcc 6.1 warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Mauro Carvalho Chehab
parent
349e4dc59a
commit
14ccffa3c1
|
|
@ -1,3 +1,4 @@
|
|||
|
||||
/*
|
||||
* Driver for the ov9650 sensor
|
||||
*
|
||||
|
|
@ -23,6 +24,157 @@
|
|||
static int ov9650_s_ctrl(struct v4l2_ctrl *ctrl);
|
||||
static void ov9650_dump_registers(struct sd *sd);
|
||||
|
||||
static const unsigned char preinit_ov9650[][3] = {
|
||||
/* [INITCAM] */
|
||||
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
|
||||
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
||||
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
|
||||
|
||||
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x08},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
|
||||
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
|
||||
{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a},
|
||||
/* Reset chip */
|
||||
{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
|
||||
/* Enable double clock */
|
||||
{SENSOR, OV9650_CLKRC, 0x80},
|
||||
/* Do something out of spec with the power */
|
||||
{SENSOR, OV9650_OFON, 0x40}
|
||||
};
|
||||
|
||||
static const unsigned char init_ov9650[][3] = {
|
||||
/* [INITCAM] */
|
||||
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
|
||||
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
||||
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
|
||||
|
||||
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x08},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
|
||||
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
|
||||
{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a},
|
||||
|
||||
/* Reset chip */
|
||||
{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
|
||||
/* One extra reset is needed in order to make the sensor behave
|
||||
properly when resuming from ram, could be a timing issue */
|
||||
{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
|
||||
|
||||
/* Enable double clock */
|
||||
{SENSOR, OV9650_CLKRC, 0x80},
|
||||
/* Do something out of spec with the power */
|
||||
{SENSOR, OV9650_OFON, 0x40},
|
||||
|
||||
/* Set fast AGC/AEC algorithm with unlimited step size */
|
||||
{SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC |
|
||||
OV9650_AEC_UNLIM_STEP_SIZE},
|
||||
|
||||
{SENSOR, OV9650_CHLF, 0x10},
|
||||
{SENSOR, OV9650_ARBLM, 0xbf},
|
||||
{SENSOR, OV9650_ACOM38, 0x81},
|
||||
/* Turn off color matrix coefficient double option */
|
||||
{SENSOR, OV9650_COM16, 0x00},
|
||||
/* Enable color matrix for RGB/YUV, Delay Y channel,
|
||||
set output Y/UV delay to 1 */
|
||||
{SENSOR, OV9650_COM13, 0x19},
|
||||
/* Enable digital BLC, Set output mode to U Y V Y */
|
||||
{SENSOR, OV9650_TSLB, 0x0c},
|
||||
/* Limit the AGC/AEC stable upper region */
|
||||
{SENSOR, OV9650_COM24, 0x00},
|
||||
/* Enable HREF and some out of spec things */
|
||||
{SENSOR, OV9650_COM12, 0x73},
|
||||
/* Set all DBLC offset signs to positive and
|
||||
do some out of spec stuff */
|
||||
{SENSOR, OV9650_DBLC1, 0xdf},
|
||||
{SENSOR, OV9650_COM21, 0x06},
|
||||
{SENSOR, OV9650_RSVD35, 0x91},
|
||||
/* Necessary, no camera stream without it */
|
||||
{SENSOR, OV9650_RSVD16, 0x06},
|
||||
{SENSOR, OV9650_RSVD94, 0x99},
|
||||
{SENSOR, OV9650_RSVD95, 0x99},
|
||||
{SENSOR, OV9650_RSVD96, 0x04},
|
||||
/* Enable full range output */
|
||||
{SENSOR, OV9650_COM15, 0x0},
|
||||
/* Enable HREF at optical black, enable ADBLC bias,
|
||||
enable ADBLC, reset timings at format change */
|
||||
{SENSOR, OV9650_COM6, 0x4b},
|
||||
/* Subtract 32 from the B channel bias */
|
||||
{SENSOR, OV9650_BBIAS, 0xa0},
|
||||
/* Subtract 32 from the Gb channel bias */
|
||||
{SENSOR, OV9650_GbBIAS, 0xa0},
|
||||
/* Do not bypass the analog BLC and to some out of spec stuff */
|
||||
{SENSOR, OV9650_Gr_COM, 0x00},
|
||||
/* Subtract 32 from the R channel bias */
|
||||
{SENSOR, OV9650_RBIAS, 0xa0},
|
||||
/* Subtract 32 from the R channel bias */
|
||||
{SENSOR, OV9650_RBIAS, 0x0},
|
||||
{SENSOR, OV9650_COM26, 0x80},
|
||||
{SENSOR, OV9650_ACOMA9, 0x98},
|
||||
/* Set the AGC/AEC stable region upper limit */
|
||||
{SENSOR, OV9650_AEW, 0x68},
|
||||
/* Set the AGC/AEC stable region lower limit */
|
||||
{SENSOR, OV9650_AEB, 0x5c},
|
||||
/* Set the high and low limit nibbles to 3 */
|
||||
{SENSOR, OV9650_VPT, 0xc3},
|
||||
/* Set the Automatic Gain Ceiling (AGC) to 128x,
|
||||
drop VSYNC at frame drop,
|
||||
limit exposure timing,
|
||||
drop frame when the AEC step is larger than the exposure gap */
|
||||
{SENSOR, OV9650_COM9, 0x6e},
|
||||
/* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync)
|
||||
and set PWDN to SLVS (slave mode vertical sync) */
|
||||
{SENSOR, OV9650_COM10, 0x42},
|
||||
/* Set horizontal column start high to default value */
|
||||
{SENSOR, OV9650_HSTART, 0x1a}, /* 210 */
|
||||
/* Set horizontal column end */
|
||||
{SENSOR, OV9650_HSTOP, 0xbf}, /* 1534 */
|
||||
/* Complementing register to the two writes above */
|
||||
{SENSOR, OV9650_HREF, 0xb2},
|
||||
/* Set vertical row start high bits */
|
||||
{SENSOR, OV9650_VSTRT, 0x02},
|
||||
/* Set vertical row end low bits */
|
||||
{SENSOR, OV9650_VSTOP, 0x7e},
|
||||
/* Set complementing vertical frame control */
|
||||
{SENSOR, OV9650_VREF, 0x10},
|
||||
{SENSOR, OV9650_ADC, 0x04},
|
||||
{SENSOR, OV9650_HV, 0x40},
|
||||
|
||||
/* Enable denoise, and white-pixel erase */
|
||||
{SENSOR, OV9650_COM22, OV9650_DENOISE_ENABLE |
|
||||
OV9650_WHITE_PIXEL_ENABLE |
|
||||
OV9650_WHITE_PIXEL_OPTION},
|
||||
|
||||
/* Enable VARIOPIXEL */
|
||||
{SENSOR, OV9650_COM3, OV9650_VARIOPIXEL},
|
||||
{SENSOR, OV9650_COM4, OV9650_QVGA_VARIOPIXEL},
|
||||
|
||||
/* Put the sensor in soft sleep mode */
|
||||
{SENSOR, OV9650_COM2, OV9650_SOFT_SLEEP | OV9650_OUTPUT_DRIVE_2X},
|
||||
};
|
||||
|
||||
static const unsigned char res_init_ov9650[][3] = {
|
||||
{SENSOR, OV9650_COM2, OV9650_OUTPUT_DRIVE_2X},
|
||||
|
||||
{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82},
|
||||
{BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00},
|
||||
{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
|
||||
{BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00},
|
||||
{BRIDGE, M5602_XB_SIG_INI, 0x01}
|
||||
};
|
||||
|
||||
/* Vertically and horizontally flips the image if matched, needed for machines
|
||||
where the sensor is mounted upside down */
|
||||
static
|
||||
|
|
|
|||
|
|
@ -156,154 +156,4 @@ static const struct m5602_sensor ov9650 = {
|
|||
.disconnect = ov9650_disconnect,
|
||||
};
|
||||
|
||||
static const unsigned char preinit_ov9650[][3] = {
|
||||
/* [INITCAM] */
|
||||
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
|
||||
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
||||
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
|
||||
|
||||
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x08},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
|
||||
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
|
||||
{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a},
|
||||
/* Reset chip */
|
||||
{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
|
||||
/* Enable double clock */
|
||||
{SENSOR, OV9650_CLKRC, 0x80},
|
||||
/* Do something out of spec with the power */
|
||||
{SENSOR, OV9650_OFON, 0x40}
|
||||
};
|
||||
|
||||
static const unsigned char init_ov9650[][3] = {
|
||||
/* [INITCAM] */
|
||||
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
|
||||
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
||||
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
||||
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
||||
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
|
||||
|
||||
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x08},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
|
||||
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
|
||||
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
|
||||
{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a},
|
||||
|
||||
/* Reset chip */
|
||||
{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
|
||||
/* One extra reset is needed in order to make the sensor behave
|
||||
properly when resuming from ram, could be a timing issue */
|
||||
{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
|
||||
|
||||
/* Enable double clock */
|
||||
{SENSOR, OV9650_CLKRC, 0x80},
|
||||
/* Do something out of spec with the power */
|
||||
{SENSOR, OV9650_OFON, 0x40},
|
||||
|
||||
/* Set fast AGC/AEC algorithm with unlimited step size */
|
||||
{SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC |
|
||||
OV9650_AEC_UNLIM_STEP_SIZE},
|
||||
|
||||
{SENSOR, OV9650_CHLF, 0x10},
|
||||
{SENSOR, OV9650_ARBLM, 0xbf},
|
||||
{SENSOR, OV9650_ACOM38, 0x81},
|
||||
/* Turn off color matrix coefficient double option */
|
||||
{SENSOR, OV9650_COM16, 0x00},
|
||||
/* Enable color matrix for RGB/YUV, Delay Y channel,
|
||||
set output Y/UV delay to 1 */
|
||||
{SENSOR, OV9650_COM13, 0x19},
|
||||
/* Enable digital BLC, Set output mode to U Y V Y */
|
||||
{SENSOR, OV9650_TSLB, 0x0c},
|
||||
/* Limit the AGC/AEC stable upper region */
|
||||
{SENSOR, OV9650_COM24, 0x00},
|
||||
/* Enable HREF and some out of spec things */
|
||||
{SENSOR, OV9650_COM12, 0x73},
|
||||
/* Set all DBLC offset signs to positive and
|
||||
do some out of spec stuff */
|
||||
{SENSOR, OV9650_DBLC1, 0xdf},
|
||||
{SENSOR, OV9650_COM21, 0x06},
|
||||
{SENSOR, OV9650_RSVD35, 0x91},
|
||||
/* Necessary, no camera stream without it */
|
||||
{SENSOR, OV9650_RSVD16, 0x06},
|
||||
{SENSOR, OV9650_RSVD94, 0x99},
|
||||
{SENSOR, OV9650_RSVD95, 0x99},
|
||||
{SENSOR, OV9650_RSVD96, 0x04},
|
||||
/* Enable full range output */
|
||||
{SENSOR, OV9650_COM15, 0x0},
|
||||
/* Enable HREF at optical black, enable ADBLC bias,
|
||||
enable ADBLC, reset timings at format change */
|
||||
{SENSOR, OV9650_COM6, 0x4b},
|
||||
/* Subtract 32 from the B channel bias */
|
||||
{SENSOR, OV9650_BBIAS, 0xa0},
|
||||
/* Subtract 32 from the Gb channel bias */
|
||||
{SENSOR, OV9650_GbBIAS, 0xa0},
|
||||
/* Do not bypass the analog BLC and to some out of spec stuff */
|
||||
{SENSOR, OV9650_Gr_COM, 0x00},
|
||||
/* Subtract 32 from the R channel bias */
|
||||
{SENSOR, OV9650_RBIAS, 0xa0},
|
||||
/* Subtract 32 from the R channel bias */
|
||||
{SENSOR, OV9650_RBIAS, 0x0},
|
||||
{SENSOR, OV9650_COM26, 0x80},
|
||||
{SENSOR, OV9650_ACOMA9, 0x98},
|
||||
/* Set the AGC/AEC stable region upper limit */
|
||||
{SENSOR, OV9650_AEW, 0x68},
|
||||
/* Set the AGC/AEC stable region lower limit */
|
||||
{SENSOR, OV9650_AEB, 0x5c},
|
||||
/* Set the high and low limit nibbles to 3 */
|
||||
{SENSOR, OV9650_VPT, 0xc3},
|
||||
/* Set the Automatic Gain Ceiling (AGC) to 128x,
|
||||
drop VSYNC at frame drop,
|
||||
limit exposure timing,
|
||||
drop frame when the AEC step is larger than the exposure gap */
|
||||
{SENSOR, OV9650_COM9, 0x6e},
|
||||
/* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync)
|
||||
and set PWDN to SLVS (slave mode vertical sync) */
|
||||
{SENSOR, OV9650_COM10, 0x42},
|
||||
/* Set horizontal column start high to default value */
|
||||
{SENSOR, OV9650_HSTART, 0x1a}, /* 210 */
|
||||
/* Set horizontal column end */
|
||||
{SENSOR, OV9650_HSTOP, 0xbf}, /* 1534 */
|
||||
/* Complementing register to the two writes above */
|
||||
{SENSOR, OV9650_HREF, 0xb2},
|
||||
/* Set vertical row start high bits */
|
||||
{SENSOR, OV9650_VSTRT, 0x02},
|
||||
/* Set vertical row end low bits */
|
||||
{SENSOR, OV9650_VSTOP, 0x7e},
|
||||
/* Set complementing vertical frame control */
|
||||
{SENSOR, OV9650_VREF, 0x10},
|
||||
{SENSOR, OV9650_ADC, 0x04},
|
||||
{SENSOR, OV9650_HV, 0x40},
|
||||
|
||||
/* Enable denoise, and white-pixel erase */
|
||||
{SENSOR, OV9650_COM22, OV9650_DENOISE_ENABLE |
|
||||
OV9650_WHITE_PIXEL_ENABLE |
|
||||
OV9650_WHITE_PIXEL_OPTION},
|
||||
|
||||
/* Enable VARIOPIXEL */
|
||||
{SENSOR, OV9650_COM3, OV9650_VARIOPIXEL},
|
||||
{SENSOR, OV9650_COM4, OV9650_QVGA_VARIOPIXEL},
|
||||
|
||||
/* Put the sensor in soft sleep mode */
|
||||
{SENSOR, OV9650_COM2, OV9650_SOFT_SLEEP | OV9650_OUTPUT_DRIVE_2X},
|
||||
};
|
||||
|
||||
static const unsigned char res_init_ov9650[][3] = {
|
||||
{SENSOR, OV9650_COM2, OV9650_OUTPUT_DRIVE_2X},
|
||||
|
||||
{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82},
|
||||
{BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00},
|
||||
{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
|
||||
{BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00},
|
||||
{BRIDGE, M5602_XB_SIG_INI, 0x01}
|
||||
};
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue