net: systemport: update umac_enable_set to take a bitmask

Quite often we need to enable either the transmitter or the receiver
bits in UMAC_CMD, use umac_enable_set() to do that for us.

This is a preliminary change to introduce suspend/resume support in the
driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2014-07-01 21:08:36 -07:00 committed by David S. Miller
parent 4710d806fc
commit 18e21b01fb
1 changed files with 7 additions and 12 deletions

View File

@ -1236,15 +1236,15 @@ static void bcm_sysport_set_rx_mode(struct net_device *dev)
}
static inline void umac_enable_set(struct bcm_sysport_priv *priv,
unsigned int enable)
u32 mask, unsigned int enable)
{
u32 reg;
reg = umac_readl(priv, UMAC_CMD);
if (enable)
reg |= CMD_RX_EN | CMD_TX_EN;
reg |= mask;
else
reg &= ~(CMD_RX_EN | CMD_TX_EN);
reg &= ~mask;
umac_writel(priv, reg, UMAC_CMD);
/* UniMAC stops on a packet boundary, wait for a full-sized packet
@ -1313,7 +1313,7 @@ static int bcm_sysport_open(struct net_device *dev)
topctrl_flush(priv);
/* Disable the UniMAC RX/TX */
umac_enable_set(priv, 0);
umac_enable_set(priv, CMD_RX_EN | CMD_TX_EN, 0);
/* Enable RBUF 2bytes alignment and Receive Status Block */
reg = rbuf_readl(priv, RBUF_CONTROL);
@ -1398,7 +1398,7 @@ static int bcm_sysport_open(struct net_device *dev)
napi_enable(&priv->napi);
/* Turn on UniMAC TX/RX */
umac_enable_set(priv, 1);
umac_enable_set(priv, CMD_RX_EN | CMD_TX_EN, 1);
phy_start(priv->phydev);
@ -1429,7 +1429,6 @@ static int bcm_sysport_stop(struct net_device *dev)
{
struct bcm_sysport_priv *priv = netdev_priv(dev);
unsigned int i;
u32 reg;
int ret;
/* stop all software from updating hardware */
@ -1444,9 +1443,7 @@ static int bcm_sysport_stop(struct net_device *dev)
intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
/* Disable UniMAC RX */
reg = umac_readl(priv, UMAC_CMD);
reg &= ~CMD_RX_EN;
umac_writel(priv, reg, UMAC_CMD);
umac_enable_set(priv, CMD_RX_EN, 0);
ret = tdma_enable_set(priv, 0);
if (ret) {
@ -1464,9 +1461,7 @@ static int bcm_sysport_stop(struct net_device *dev)
}
/* Disable UniMAC TX */
reg = umac_readl(priv, UMAC_CMD);
reg &= ~CMD_TX_EN;
umac_writel(priv, reg, UMAC_CMD);
umac_enable_set(priv, CMD_TX_EN, 0);
/* Free RX/TX rings SW structures */
for (i = 0; i < dev->num_tx_queues; i++)