p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

drm: adv7511: it's HPD, not HDP 

Fix this typo, consequently used over both files :)

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Archit Taneja <architt@codeaurora.org>
This commit is contained in:
Wolfram Sang 2016-01-04 03:33:47 +01:00 committed by Wolfram Sang
parent cd38a33750
commit 29ce4ed441
2 changed files with 17 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/gpu/drm/i2c/adv7511.c
View File

@ -378,16 +378,16 @@ static void adv7511_power_on(struct adv7511 *adv7511)
}
/*
* Per spec it is allowed to pulse the HDP signal to indicate that the
* Per spec it is allowed to pulse the HPD signal to indicate that the
* EDID information has changed. Some monitors do this when they wakeup
* from standby or are enabled. When the HDP goes low the adv7511 is
* from standby or are enabled. When the HPD goes low the adv7511 is
* reset and the outputs are disabled which might cause the monitor to
* go to standby again. To avoid this we ignore the HDP pin for the
* go to standby again. To avoid this we ignore the HPD pin for the
* first few seconds after enabling the output.
*/
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
ADV7511_REG_POWER2_HDP_SRC_MASK,
ADV7511_REG_POWER2_HDP_SRC_NONE);
ADV7511_REG_POWER2_HPD_SRC_MASK,
ADV7511_REG_POWER2_HPD_SRC_NONE);
/*
* Most of the registers are reset during power down or when HPD is low.
@ -421,9 +421,9 @@ static bool adv7511_hpd(struct adv7511 *adv7511)
if (ret < 0)
return false;
if (irq0 & ADV7511_INT0_HDP) {
if (irq0 & ADV7511_INT0_HPD) {
regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
ADV7511_INT0_HDP);
ADV7511_INT0_HPD);
return true;
}
@ -446,7 +446,7 @@ static int adv7511_irq_process(struct adv7511 *adv7511)
regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
if (irq0 & ADV7511_INT0_HDP && adv7511->encoder)
if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
drm_helper_hpd_irq_event(adv7511->encoder->dev);
if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
@ -648,10 +648,10 @@ adv7511_encoder_detect(struct drm_encoder *encoder,
if (adv7511->status == connector_status_connected)
status = connector_status_disconnected;
} else {
/* Renable HDP sensing */
/* Renable HPD sensing */
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
ADV7511_REG_POWER2_HDP_SRC_MASK,
ADV7511_REG_POWER2_HDP_SRC_BOTH);
ADV7511_REG_POWER2_HPD_SRC_MASK,
ADV7511_REG_POWER2_HPD_SRC_BOTH);
}
adv7511->status = status;

12
drivers/gpu/drm/i2c/adv7511.h
View File

@ -90,7 +90,7 @@
#define ADV7511_CSC_ENABLE BIT(7)
#define ADV7511_CSC_UPDATE_MODE BIT(5)
#define ADV7511_INT0_HDP BIT(7)
#define ADV7511_INT0_HPD BIT(7)
#define ADV7511_INT0_VSYNC BIT(5)
#define ADV7511_INT0_AUDIO_FIFO_FULL BIT(4)
#define ADV7511_INT0_EDID_READY BIT(2)
@ -157,11 +157,11 @@
#define ADV7511_PACKET_ENABLE_SPARE2 BIT(1)
#define ADV7511_PACKET_ENABLE_SPARE1 BIT(0)
#define ADV7511_REG_POWER2_HDP_SRC_MASK 0xc0
#define ADV7511_REG_POWER2_HDP_SRC_BOTH 0x00
#define ADV7511_REG_POWER2_HDP_SRC_HDP 0x40
#define ADV7511_REG_POWER2_HDP_SRC_CEC 0x80
#define ADV7511_REG_POWER2_HDP_SRC_NONE 0xc0
#define ADV7511_REG_POWER2_HPD_SRC_MASK 0xc0
#define ADV7511_REG_POWER2_HPD_SRC_BOTH 0x00
#define ADV7511_REG_POWER2_HPD_SRC_HPD 0x40
#define ADV7511_REG_POWER2_HPD_SRC_CEC 0x80
#define ADV7511_REG_POWER2_HPD_SRC_NONE 0xc0
#define ADV7511_REG_POWER2_TDMS_ENABLE BIT(4)
#define ADV7511_REG_POWER2_GATE_INPUT_CLK BIT(0)