ASoC: fsl-ssi: Use generic DMA bindings if possible

There may be some platforms using fsl-ssi that do not have a DMA driver
with generic DMA bindings. So this patch adds support for the generic
DMA bindings, while still accepting the old "fsl,dma-events" property if
"dmas" is not found.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Markus Pargmann 2013-07-27 13:31:54 +02:00 committed by Mark Brown
parent de623ece5b
commit 3a5e517bb2
2 changed files with 16 additions and 8 deletions

View File

@ -51,6 +51,10 @@ Optional properties:
filter the codec stream. This is necessary for some boards
where an incompatible codec is connected to this SSI, e.g.
on pca100 and pcm043.
- dmas: Generic dma devicetree binding as described in
Documentation/devicetree/bindings/dma/dma.txt.
- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
is not defined.
Child 'codec' node required properties:
- compatible: Compatible list, contains the name of the codec

View File

@ -794,15 +794,19 @@ static int fsl_ssi_probe(struct platform_device *pdev)
&ssi_private->filter_data_tx;
ssi_private->dma_params_rx.filter_data =
&ssi_private->filter_data_rx;
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helplers get in.
*/
ret = of_property_read_u32_array(pdev->dev.of_node,
if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
ssi_private->use_dma) {
/*
* FIXME: This is a temporary solution until all
* necessary dma drivers support the generic dma
* bindings.
*/
ret = of_property_read_u32_array(pdev->dev.of_node,
"fsl,ssi-dma-events", dma_events, 2);
if (ret && !ssi_private->use_dma) {
dev_err(&pdev->dev, "could not get dma events\n");
goto error_clk;
if (ret && ssi_private->use_dma) {
dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
goto error_clk;
}
}
shared = of_device_is_compatible(of_get_parent(np),