From 8aa5f09df06f0c3a5a799c5fcf878acaf29db93f Mon Sep 17 00:00:00 2001
From: Maxime Coquelin <maxime.coquelin@st.com>
Date: Wed, 23 Sep 2015 02:47:44 +0200
Subject: [PATCH 01/17] ARM: dts: stih407: Enable PWM nodes only board level
The PWM may not be used on some boards, so enable them only the board file.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-family.dtsi | 6 ++++--
arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 ++++++++
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index ae0527754000..9975e8feffa6 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -585,7 +585,6 @@ dwc3: dwc3@9900000 {
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
pinctrl-names = "default";
@@ -593,12 +592,13 @@ pwm0: pwm@9810000 {
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
+
+ status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
@@ -609,6 +609,8 @@ &pinctrl_pwm1_chan2_default
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
+
+ status = "disabled";
};
};
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index f589fe487f13..ab029f7239b2 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -27,6 +27,14 @@ green {
};
};
+ pwm0: pwm@9810000 {
+ status = "okay";
+ };
+
+ pwm1: pwm@9510000 {
+ status = "okay";
+ };
+
i2c@9842000 {
status = "okay";
};
From 759742d13caa11acf24b0aef7daa8b56f244f231 Mon Sep 17 00:00:00 2001
From: Maxime Coquelin <maxime.coquelin@st.com>
Date: Wed, 23 Sep 2015 03:04:24 +0200
Subject: [PATCH 02/17] ARM: dts: stih407/410: Tidy up display nodes
The display nodes are common to both STiH407 and STiH410, move them to the
family file.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-family.dtsi | 13 +++++++++++++
arch/arm/boot/dts/stih407.dtsi | 13 -------------
arch/arm/boot/dts/stih410.dtsi | 13 -------------
3 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 9975e8feffa6..5b454d962b52 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -152,6 +152,19 @@ irq-syscfg {
<ST_IRQ_SYSCFG_DISABLED>;
};
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 3efa3b2ebe90..98c3468bdca8 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -10,19 +10,6 @@
#include "stih407-family.dtsi"
/ {
soc {
- /* Display */
- vtg_main: sti-vtg-main@8d02800 {
- compatible = "st,vtg";
- reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
- };
-
- vtg_aux: sti-vtg-aux@8d00200 {
- compatible = "st,vtg";
- reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
- };
-
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6f40bc99c22f..23f4a48e207b 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -85,19 +85,6 @@ ehci1: usb@9a83e00 {
phy-names = "usb";
};
- /* Display */
- vtg_main: sti-vtg-main@8d02800 {
- compatible = "st,vtg";
- reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
- };
-
- vtg_aux: sti-vtg-aux@8d00200 {
- compatible = "st,vtg";
- reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
- };
-
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
From b771ae27bc72c7be48993872396c8f1d9a72b12d Mon Sep 17 00:00:00 2001
From: Maxime Coquelin <maxime.coquelin@st.com>
Date: Wed, 23 Sep 2015 19:53:58 +0200
Subject: [PATCH 03/17] ARM: dts: stih410: Enable USB2.0 and related PHY nodes
at board level
A board might not expose the USB2.0 ports, so disable them by default in SoC
file, and enable them in b2120 board.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++
arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
2 files changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 16f02c5e33a4..8af1e73c0532 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -35,5 +35,29 @@ mmc0: sdhci@09060000 {
sd-uhs-sdr104;
sd-uhs-ddr50;
};
+
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
+ ohci0: usb@9a03c00 {
+ status = "okay";
+ };
+
+ ehci0: usb@9a03e00 {
+ status = "okay";
+ };
+
+ ohci1: usb@9a83c00 {
+ status = "okay";
+ };
+
+ ehci1: usb@9a83e00 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 23f4a48e207b..e3150e38a8e8 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -22,6 +22,8 @@ usb2_picophy1: phy2 {
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
+
+ status = "disabled";
};
usb2_picophy2: phy3 {
@@ -31,6 +33,8 @@ usb2_picophy2: phy3 {
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY1_RESET>;
reset-names = "global", "port";
+
+ status = "disabled";
};
ohci0: usb@9a03c00 {
@@ -43,6 +47,8 @@ ohci0: usb@9a03c00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
+
+ status = "disabled";
};
ehci0: usb@9a03e00 {
@@ -57,6 +63,8 @@ ehci0: usb@9a03e00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
+
+ status = "disabled";
};
ohci1: usb@9a83c00 {
@@ -69,6 +77,8 @@ ohci1: usb@9a83c00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
+
+ status = "disabled";
};
ehci1: usb@9a83e00 {
@@ -83,6 +93,8 @@ ehci1: usb@9a83e00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
+
+ status = "disabled";
};
sti-display-subsystem {
From 0f38d5ad1f25594c3ffc1cab33293de2b5fcb3e0 Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 04/17] ARM: STi: DT: STiH407: Add a cec0 pin definition
This pin setup provides the correct configuration in order to
interact with the CEC HW.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Nicolas Vanhaelewyn <nicolas.vanhaelewyn@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 1683debd0854..30db4538bba8 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -107,6 +107,14 @@ pio5: gpio@09615000 {
st,retime-pin-mask = <0x3f>;
};
+ cec0 {
+ pinctrl_cec0_default: cec0-default {
+ st,pins {
+ hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+ };
+ };
+ };
+
rc {
pinctrl_ir: ir0 {
st,pins {
From 38fc7859867492f3ee00583acd70ebceff27d1fd Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 05/17] ARM: STi: DT: STiH407: Add i2c3 alternate pin configs
i2c3 controller can use several sets of pins depending
on board design. This patch adds the missing alternate
pinconfigs.
Signed-off-by: Seraphin Bonnaffe <seraphin.bonnaffe@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 30db4538bba8..135920ef2ab1 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -430,12 +430,24 @@ st,pins {
};
i2c3 {
- pinctrl_i2c3_default: i2c3-default {
+ pinctrl_i2c3_default: i2c3-alt1-0 {
st,pins {
sda = <&pio18 6 ALT1 BIDIR>;
scl = <&pio18 5 ALT1 BIDIR>;
};
};
+ pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+ st,pins {
+ sda = <&pio17 7 ALT1 BIDIR>;
+ scl = <&pio17 6 ALT1 BIDIR>;
+ };
+ };
+ pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+ st,pins {
+ sda = <&pio13 6 ALT3 BIDIR>;
+ scl = <&pio13 5 ALT3 BIDIR>;
+ };
+ };
};
spi0 {
From 193bb623f22a63524e71c7a8980189d59fa6083c Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 06/17] ARM: DT: STiH407: Add SPI 3 wire and 4 wire pinctrl
configs
This patch adds the spi pinctrl configurations for all SPI
controllers, and also the alternate muxings which
can be used depending on board design.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 239 ++++++++++++++++++++++++-
1 file changed, 235 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 135920ef2ab1..2248e440134b 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -262,6 +262,57 @@ st,pins {
};
};
};
+
+ spi10 {
+ pinctrl_spi10_default: spi10-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 OUT>;
+ mrst = <&pio4 7 ALT1 IN>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi11 {
+ pinctrl_spi11_default: spi11-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 OUT>;
+ mrst = <&pio3 0 ALT2 IN>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi12 {
+ pinctrl_spi12_default: spi12-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 OUT>;
+ mrst = <&pio3 4 ALT2 IN>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+ };
};
pin-controller-front0 {
@@ -451,11 +502,159 @@ st,pins {
};
spi0 {
- pinctrl_spi0_default: spi0-default {
+ pinctrl_spi0_default: spi0-4w-alt2-0 {
st,pins {
- mtsr = <&pio12 6 ALT2 BIDIR>;
- mrst = <&pio12 7 ALT2 BIDIR>;
- scl = <&pio12 5 ALT2 BIDIR>;
+ mtsr = <&pio10 6 ALT2 OUT>;
+ mrst = <&pio10 7 ALT2 IN>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 OUT>;
+ mrst = <&pio19 5 ALT1 IN>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1_default: spi1-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 OUT>;
+ mrst = <&pio11 2 ALT2 IN>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 OUT>;
+ mrst = <&pio14 4 ALT1 IN>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2_default: spi2-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 OUT>;
+ mrst = <&pio12 7 ALT2 IN>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 OUT>;
+ mrst = <&pio14 7 ALT1 IN>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 OUT>;
+ mrst = <&pio15 7 ALT2 IN>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi3 {
+ pinctrl_spi3_default: spi3-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 OUT>;
+ mrst = <&pio13 7 ALT3 IN>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 OUT>;
+ mrst = <&pio17 5 ALT1 IN>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 OUT>;
+ mrst = <&pio18 7 ALT1 IN>;
+ scl = <&pio18 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+ scl = <&pio18 5 ALT1 OUT>;
};
};
};
@@ -778,6 +977,38 @@ st,pins {
};
};
};
+
+ spi4 {
+ pinctrl_spi4_default: spi4-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 OUT>;
+ mrst = <&pio30 2 ALT1 IN>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 OUT>;
+ mrst = <&pio34 2 ALT3 IN>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+ };
};
pin-controller-flash {
From d8036479848b997094b5bd32aa96f61960d3f0db Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 07/17] ARM: DT: STiH407: Add serial3 pinctrl configuration
Add missing serial 3 pinctrl config. This can be used
on b2206 HVK, where it defaults to PIO31[3] & PIO31[4],
alternate 1.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 2248e440134b..5d725fe7bbfc 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1009,6 +1009,15 @@ st,pins {
};
};
};
+
+ serial3 {
+ pinctrl_serial3: serial3-0 {
+ st,pins {
+ tx = <&pio31 3 ALT1 OUT>;
+ rx = <&pio31 4 ALT1 IN>;
+ };
+ };
+ };
};
pin-controller-flash {
From 9af0a7b5e6cbf1a67258dd5eca03b4403640a355 Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 08/17] ARM: DT: STiH407: Add SPI FSM (NOR Flash) Controller
pin config
This patch adds the pin configuration for the NOR flash controller.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 5d725fe7bbfc..b7a405f49b69 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1072,6 +1072,19 @@ st,pins {
};
};
};
+
+ fsm {
+ pinctrl_fsm: fsm {
+ st,pins {
+ spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+ spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+ spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+ spi-fsm-miso = <&pio40 3 ALT1 IN>;
+ spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+ spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+ };
+ };
+ };
};
};
};
From 8eefa90f3c808af200c041274a8268e20fbedbf7 Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 09/17] ARM: DT: STiH407: Add NAND flash controller pin
configuration
This patch adds NAND flash support controller pin configuration
for STiH407 family silicon.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index b7a405f49b69..d281f9cfc83f 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1085,6 +1085,29 @@ st,pins {
};
};
};
+
+ nand {
+ pinctrl_nand: nand {
+ st,pins {
+ nand_cs1 = <&pio40 6 ALT3 OUT>;
+ nand_cs0 = <&pio40 7 ALT3 OUT>;
+ nand_d0 = <&pio41 0 ALT3 BIDIR>;
+ nand_d1 = <&pio41 1 ALT3 BIDIR>;
+ nand_d2 = <&pio41 2 ALT3 BIDIR>;
+ nand_d3 = <&pio41 3 ALT3 BIDIR>;
+ nand_d4 = <&pio41 4 ALT3 BIDIR>;
+ nand_d5 = <&pio41 5 ALT3 BIDIR>;
+ nand_d6 = <&pio41 6 ALT3 BIDIR>;
+ nand_d7 = <&pio41 7 ALT3 BIDIR>;
+ nand_we = <&pio42 0 ALT3 OUT>;
+ nand_dqs = <&pio42 1 ALT3 OUT>;
+ nand_ale = <&pio42 2 ALT3 OUT>;
+ nand_cle = <&pio42 3 ALT3 OUT>;
+ nand_rnb = <&pio42 4 ALT3 IN>;
+ nand_oe = <&pio42 5 ALT3 OUT>;
+ };
+ };
+ };
};
};
};
From 0e60262814da699ccc6cb5e1880da88ed25c28fe Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 10/17] ARM: DT: STiH407: Add systrace pin configuration
This patch adds the pin config for systrace for
STiH407 family silicon.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index d281f9cfc83f..7a1bd428898e 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -846,6 +846,18 @@ st,pins {
};
};
};
+
+ systrace {
+ pinctrl_systrace_default: systrace-default {
+ st,pins {
+ trc_data0 = <&pio11 3 ALT5 OUT>;
+ trc_data1 = <&pio11 4 ALT5 OUT>;
+ trc_data2 = <&pio11 5 ALT5 OUT>;
+ trc_data3 = <&pio11 6 ALT5 OUT>;
+ trc_clk = <&pio11 7 ALT5 OUT>;
+ };
+ };
+ };
};
pin-controller-front1 {
From fab876695a1ac2f55ed86dce5ec18db35f08a0bb Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 11/17] ARM: DT: STiH407: Add SD pinctrl config for mmc0
controller
This patch adds the missing SD pinctrl config
for mmc/sd controller 0. This is required to enable the
B2144A daughter board that exposes this controller as a sd
slot.
Signed-off-by: Nebil BEN MEFTEH <nebil.ben-mefteh@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 7a1bd428898e..352fe98535f5 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -1083,6 +1083,21 @@ st,pins {
emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
};
};
+ pinctrl_sd0: sd0-0 {
+ st,pins {
+ sd_clk = <&pio40 6 ALT1 BIDIR>;
+ sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+ sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+ sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+ sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+ sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+ sd_led = <&pio42 0 ALT2 OUT>;
+ sd_pwren = <&pio42 2 ALT2 OUT>;
+ sd_vsel = <&pio42 3 ALT2 OUT>;
+ sd_cd = <&pio42 4 ALT2 IN>;
+ sd_wp = <&pio42 5 ALT2 IN>;
+ };
+ };
};
fsm {
From 0252d86366538eb7e65e35733eb1c0260410f720 Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 12/17] ARM: DT: STiH407: Add pinconfig for IRB UHF and IRB TX
This patch adds the pinconfig for IRB TX and IRB UHF.
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 352fe98535f5..9daab1f3dc81 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -121,6 +121,24 @@ st,pins {
ir = <&pio4 0 ALT2 IN>;
};
};
+
+ pinctrl_uhf: uhf0 {
+ st,pins {
+ ir = <&pio4 1 ALT2 IN>;
+ };
+ };
+
+ pinctrl_tx: tx0 {
+ st,pins {
+ tx = <&pio4 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_tx_od: tx_od0 {
+ st,pins {
+ tx_od = <&pio4 3 ALT2 OUT>;
+ };
+ };
};
/* SBC_ASC0 - UART10 */
From 9d6d736bfe6c65ec6ca42dc0f36baf9c18eae7d6 Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 13/17] ARM: DT: STiH407: Add RMII pinctrl support
This patch adds the RMII pinctrl support for the Synopsys
MAC on STiH407 SoCs.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 27 ++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 9daab1f3dc81..881e94a16fee 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -256,6 +256,33 @@ st,pins {
phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
+
+ pinctrl_rmii1: rmii1-0 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk: rmii1_phyclk {
+ st,pins {
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+ st,pins {
+ phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+ };
+ };
};
pwm1 {
From 55fd9b184cb6339f51adc9e27e6900bb431a7d18 Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Mon, 28 Sep 2015 14:37:00 +0200
Subject: [PATCH 14/17] ARM: STi: STiH407: Add spi default pinctrl groups.
Now we have default pinconfig groups for each SPI
controller ensure it is used by the SPI controller
node.
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 5b454d962b52..1138eea5ab17 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -409,6 +409,8 @@ spi@9841000 {
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
status = "disabled";
};
@@ -419,6 +421,8 @@ spi@9842000 {
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
status = "disabled";
};
@@ -429,6 +433,8 @@ spi@9843000 {
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3_default>;
status = "disabled";
};
@@ -439,6 +445,8 @@ spi@9844000 {
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4_default>;
status = "disabled";
};
@@ -450,6 +458,8 @@ spi@9540000 {
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi10_default>;
status = "disabled";
};
@@ -460,6 +470,8 @@ spi@9541000 {
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi11_default>;
status = "disabled";
};
@@ -470,6 +482,8 @@ spi@9542000 {
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi12_default>;
status = "disabled";
};
From 2bb1441f97ac9765e8d558a1ee726a21e1df5fbe Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Tue, 29 Sep 2015 10:52:00 +0200
Subject: [PATCH 15/17] ARM: STi: DT: STiH407: Rename incorrect interrupt
related binding
interrupts-names => interrupt-names
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 881e94a16fee..8fe542aa1fa4 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -53,7 +53,7 @@ pin-controller-sbc {
reg = <0x0961f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
pio0: gpio@09610000 {
@@ -368,7 +368,7 @@ pin-controller-front0 {
reg = <0x0920f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
pio10: pio@09200000 {
@@ -913,7 +913,7 @@ pin-controller-front1 {
reg = <0x0921f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
tsin4 {
@@ -946,7 +946,7 @@ pin-controller-rear {
reg = <0x0922f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
pio30: gpio@09220000 {
From 82c05810b2ef6149368b0b2db205c24a832547ad Mon Sep 17 00:00:00 2001
From: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Date: Mon, 24 Aug 2015 16:23:00 +0200
Subject: [PATCH 16/17] ARM: DT: STi: STiH418: Fix mmc0 clock configuration
This patch configure correctly the MMC-0 clock for STiH418 platform.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih418.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 8160a75539a4..965f88160718 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -99,5 +99,11 @@ ehci1: usb@9a83e00 {
phys = <&usb2_picophy2>;
phy-names = "usb";
};
+
+ mmc0: sdhci@09060000 {
+ assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ assigned-clock-parents = <&clk_s_c0_pll1 0>;
+ assigned-clock-rates = <200000000>;
+ };
};
};
From cae010a1b663a779fdbfbf625839bc07dad16428 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Thu, 17 Sep 2015 15:45:00 +0200
Subject: [PATCH 17/17] ARM: STi: STiH407: Enable the 2 HW Random Number
Generators for STiH4{07, 10}
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1138eea5ab17..582154bbe3f3 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -639,5 +639,19 @@ &pinctrl_pwm1_chan2_default
status = "disabled";
};
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
};
};