ARM: moxart: add MOXA ART SoC device tree files
Add a generic (dtsi) include file for MOXA ART SoCs. Also add a file for UC-7112-LX. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
parent
31d95612cb
commit
448e7edefa
|
@ -0,0 +1,12 @@
|
|||
MOXA ART device tree bindings
|
||||
|
||||
Boards with the MOXA ART SoC shall have the following properties:
|
||||
|
||||
Required root node property:
|
||||
|
||||
compatible = "moxa,moxart";
|
||||
|
||||
Boards:
|
||||
|
||||
- UC-7112-LX: embedded computer
|
||||
compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"
|
|
@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
|
|||
kirkwood-ts219-6281.dtb \
|
||||
kirkwood-ts219-6282.dtb
|
||||
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
|
||||
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
|
||||
qcom-msm8960-cdp.dtb
|
||||
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
|
||||
|
|
|
@ -0,0 +1,109 @@
|
|||
/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
|
||||
*
|
||||
* Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "moxart.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MOXA UC-7112-LX";
|
||||
compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
flash@80000000,0 {
|
||||
compatible = "numonyx,js28f128", "cfi-flash";
|
||||
reg = <0x80000000 0x1000000>;
|
||||
bank-width = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
partition@0 {
|
||||
label = "bootloader";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "linux kernel";
|
||||
reg = <0x40000 0x1C0000>;
|
||||
};
|
||||
partition@200000 {
|
||||
label = "root filesystem";
|
||||
reg = <0x200000 0x800000>;
|
||||
};
|
||||
partition@a00000 {
|
||||
label = "user filesystem";
|
||||
reg = <0xa00000 0x600000>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
user-led {
|
||||
label = "ready-led";
|
||||
gpios = <&gpio 27 0x1>;
|
||||
default-state = "on";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys_polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <500>;
|
||||
button@25 {
|
||||
label = "GPIO Reset";
|
||||
linux,code = <116>;
|
||||
gpios = <&gpio 25 1>;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
|
||||
};
|
||||
};
|
||||
|
||||
&clk_pll {
|
||||
clocks = <&ref12>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@1 {
|
||||
device_type = "ethernet-phy";
|
||||
compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
status = "okay";
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
device_type = "ethernet-phy";
|
||||
compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
|
@ -0,0 +1,154 @@
|
|||
/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
|
||||
*
|
||||
* Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "moxa,moxart";
|
||||
model = "MOXART";
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "faraday,fa526";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ref12: ref12M {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x90000000 0x10000000>;
|
||||
ranges;
|
||||
|
||||
intc: interrupt-controller@98800000 {
|
||||
compatible = "moxa,moxart-ic";
|
||||
reg = <0x98800000 0x38>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-mask = <0x00080000>;
|
||||
};
|
||||
|
||||
clk_pll: clk_pll@98100000 {
|
||||
compatible = "moxa,moxart-pll-clock";
|
||||
#clock-cells = <0>;
|
||||
reg = <0x98100000 0x34>;
|
||||
};
|
||||
|
||||
clk_apb: clk_apb@98100000 {
|
||||
compatible = "moxa,moxart-apb-clock";
|
||||
#clock-cells = <0>;
|
||||
reg = <0x98100000 0x34>;
|
||||
clocks = <&clk_pll>;
|
||||
};
|
||||
|
||||
timer: timer@98400000 {
|
||||
compatible = "moxa,moxart-timer";
|
||||
reg = <0x98400000 0x42>;
|
||||
interrupts = <19 1>;
|
||||
clocks = <&clk_apb>;
|
||||
};
|
||||
|
||||
gpio: gpio@98700000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
compatible = "moxa,moxart-gpio";
|
||||
reg = <0x98700000 0xC>;
|
||||
};
|
||||
|
||||
rtc: rtc {
|
||||
compatible = "moxa,moxart-rtc";
|
||||
gpio-rtc-sclk = <&gpio 5 0>;
|
||||
gpio-rtc-data = <&gpio 6 0>;
|
||||
gpio-rtc-reset = <&gpio 7 0>;
|
||||
};
|
||||
|
||||
dma: dma@90500000 {
|
||||
compatible = "moxa,moxart-dma";
|
||||
reg = <0x90500080 0x40>;
|
||||
interrupts = <24 0>;
|
||||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
watchdog: watchdog@98500000 {
|
||||
compatible = "moxa,moxart-watchdog";
|
||||
reg = <0x98500000 0x10>;
|
||||
clocks = <&clk_apb>;
|
||||
};
|
||||
|
||||
sdhci: sdhci@98e00000 {
|
||||
compatible = "moxa,moxart-sdhci";
|
||||
reg = <0x98e00000 0x5C>;
|
||||
interrupts = <5 0>;
|
||||
clocks = <&clk_apb>;
|
||||
dmas = <&dma 5>,
|
||||
<&dma 5>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio0: mdio@90900090 {
|
||||
compatible = "moxa,moxart-mdio";
|
||||
reg = <0x90900090 0x8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio1: mdio@92000090 {
|
||||
compatible = "moxa,moxart-mdio";
|
||||
reg = <0x92000090 0x8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mac0: mac@90900000 {
|
||||
compatible = "moxa,moxart-mac";
|
||||
reg = <0x90900000 0x90>;
|
||||
interrupts = <25 0>;
|
||||
phy-handle = <ðphy0>;
|
||||
phy-mode = "mii";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mac1: mac@92000000 {
|
||||
compatible = "moxa,moxart-mac";
|
||||
reg = <0x92000000 0x90>;
|
||||
interrupts = <27 0>;
|
||||
phy-handle = <ðphy1>;
|
||||
phy-mode = "mii";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: uart@98200000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x98200000 0x20>;
|
||||
interrupts = <31 8>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clock-frequency = <14745600>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
Loading…
Reference in New Issue