From 45190f01dd402112d3d22c0ddc4152994f9e1e55 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Thu, 30 Jan 2020 22:15:04 -0800 Subject: [PATCH] mm/zswap.c: add allocation hysteresis if pool limit is hit zswap will always try to shrink pool when zswap is full. If there is a high pressure on zswap it will result in flipping pages in and out zswap pool without any real benefit, and the overall system performance will drop. The previous discussion on this subject [1] ended up with a suggestion to implement a sort of hysteresis to refuse taking pages into zswap pool until it has sufficient space if the limit has been hit. This is my take on this. Hysteresis is controlled with a sysfs-configurable parameter (namely, /sys/kernel/debug/zswap/accept_threhsold_percent). It specifies the threshold at which zswap would start accepting pages again after it became full. Setting this parameter to 100 disables the hysteresis and sets the zswap behavior to pre-hysteresis state. [1] https://lkml.org/lkml/2019/11/8/949 Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.com Signed-off-by: Vitaly Wool Cc: Dan Streetman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/zswap.rst | 13 ++++++ mm/zswap.c | 87 ++++++++++++++++++++++++-------------- 2 files changed, 68 insertions(+), 32 deletions(-) diff --git a/Documentation/vm/zswap.rst b/Documentation/vm/zswap.rst index 1444ecd40911..61f6185188cd 100644 --- a/Documentation/vm/zswap.rst +++ b/Documentation/vm/zswap.rst @@ -130,6 +130,19 @@ checking for the same-value filled pages during store operation. However, the existing pages which are marked as same-value filled pages remain stored unchanged in zswap until they are either loaded or invalidated. +To prevent zswap from shrinking pool when zswap is full and there's a high +pressure on swap (this will result in flipping pages in and out zswap pool +without any real benefit but with a performance drop for the system), a +special parameter has been introduced to implement a sort of hysteresis to +refuse taking pages into zswap pool until it has sufficient space if the limit +has been hit. To set the threshold at which zswap would start accepting pages +again after it became full, use the sysfs ``accept_threhsold_percent`` +attribute, e. g.:: + + echo 80 > /sys/module/zswap/parameters/accept_threhsold_percent + +Setting this parameter to 100 will disable the hysteresis. + A debugfs interface is provided for various statistic about pool size, number of pages stored, same-value filled pages and various counters for the reasons pages are rejected. diff --git a/mm/zswap.c b/mm/zswap.c index 46a322316e52..7ec8bd912d13 100644 --- a/mm/zswap.c +++ b/mm/zswap.c @@ -32,6 +32,7 @@ #include #include #include +#include /********************************* * statistics @@ -65,6 +66,11 @@ static u64 zswap_reject_kmemcache_fail; /* Duplicate store was encountered (rare) */ static u64 zswap_duplicate_entry; +/* Shrinker work queue */ +static struct workqueue_struct *shrink_wq; +/* Pool limit was hit, we need to calm down */ +static bool zswap_pool_reached_full; + /********************************* * tunables **********************************/ @@ -109,6 +115,11 @@ module_param_cb(zpool, &zswap_zpool_param_ops, &zswap_zpool_type, 0644); static unsigned int zswap_max_pool_percent = 20; module_param_named(max_pool_percent, zswap_max_pool_percent, uint, 0644); +/* The threshold for accepting new pages after the max_pool_percent was hit */ +static unsigned int zswap_accept_thr_percent = 90; /* of max pool size */ +module_param_named(accept_threshold_percent, zswap_accept_thr_percent, + uint, 0644); + /* Enable/disable handling same-value filled pages (enabled by default) */ static bool zswap_same_filled_pages_enabled = true; module_param_named(same_filled_pages_enabled, zswap_same_filled_pages_enabled, @@ -123,7 +134,8 @@ struct zswap_pool { struct crypto_comp * __percpu *tfm; struct kref kref; struct list_head list; - struct work_struct work; + struct work_struct release_work; + struct work_struct shrink_work; struct hlist_node node; char tfm_name[CRYPTO_MAX_ALG_NAME]; }; @@ -214,6 +226,13 @@ static bool zswap_is_full(void) DIV_ROUND_UP(zswap_pool_total_size, PAGE_SIZE); } +static bool zswap_can_accept(void) +{ + return totalram_pages() * zswap_accept_thr_percent / 100 * + zswap_max_pool_percent / 100 > + DIV_ROUND_UP(zswap_pool_total_size, PAGE_SIZE); +} + static void zswap_update_total_size(void) { struct zswap_pool *pool; @@ -501,6 +520,16 @@ static struct zswap_pool *zswap_pool_find_get(char *type, char *compressor) return NULL; } +static void shrink_worker(struct work_struct *w) +{ + struct zswap_pool *pool = container_of(w, typeof(*pool), + shrink_work); + + if (zpool_shrink(pool->zpool, 1, NULL)) + zswap_reject_reclaim_fail++; + zswap_pool_put(pool); +} + static struct zswap_pool *zswap_pool_create(char *type, char *compressor) { struct zswap_pool *pool; @@ -551,6 +580,7 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor) */ kref_init(&pool->kref); INIT_LIST_HEAD(&pool->list); + INIT_WORK(&pool->shrink_work, shrink_worker); zswap_pool_debug("created", pool); @@ -624,7 +654,8 @@ static int __must_check zswap_pool_get(struct zswap_pool *pool) static void __zswap_pool_release(struct work_struct *work) { - struct zswap_pool *pool = container_of(work, typeof(*pool), work); + struct zswap_pool *pool = container_of(work, typeof(*pool), + release_work); synchronize_rcu(); @@ -647,8 +678,8 @@ static void __zswap_pool_empty(struct kref *kref) list_del_rcu(&pool->list); - INIT_WORK(&pool->work, __zswap_pool_release); - schedule_work(&pool->work); + INIT_WORK(&pool->release_work, __zswap_pool_release); + schedule_work(&pool->release_work); spin_unlock(&zswap_pools_lock); } @@ -942,22 +973,6 @@ static int zswap_writeback_entry(struct zpool *pool, unsigned long handle) return ret; } -static int zswap_shrink(void) -{ - struct zswap_pool *pool; - int ret; - - pool = zswap_pool_last_get(); - if (!pool) - return -ENOENT; - - ret = zpool_shrink(pool->zpool, 1, NULL); - - zswap_pool_put(pool); - - return ret; -} - static int zswap_is_page_same_filled(void *ptr, unsigned long *value) { unsigned int pos; @@ -1011,21 +1026,23 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset, /* reclaim space if needed */ if (zswap_is_full()) { - zswap_pool_limit_hit++; - if (zswap_shrink()) { - zswap_reject_reclaim_fail++; - ret = -ENOMEM; - goto reject; - } + struct zswap_pool *pool; - /* A second zswap_is_full() check after - * zswap_shrink() to make sure it's now - * under the max_pool_percent - */ - if (zswap_is_full()) { + zswap_pool_limit_hit++; + zswap_pool_reached_full = true; + pool = zswap_pool_last_get(); + if (pool) + queue_work(shrink_wq, &pool->shrink_work); + ret = -ENOMEM; + goto reject; + } + + if (zswap_pool_reached_full) { + if (!zswap_can_accept()) { ret = -ENOMEM; goto reject; - } + } else + zswap_pool_reached_full = false; } /* allocate entry */ @@ -1332,11 +1349,17 @@ static int __init init_zswap(void) zswap_enabled = false; } + shrink_wq = create_workqueue("zswap-shrink"); + if (!shrink_wq) + goto fallback_fail; + frontswap_register_ops(&zswap_frontswap_ops); if (zswap_debugfs_init()) pr_warn("debugfs initialization failed\n"); return 0; +fallback_fail: + zswap_pool_destroy(pool); hp_fail: cpuhp_remove_state(CPUHP_MM_ZSWP_MEM_PREPARE); dstmem_fail: