Input: add new driver for the Surface 3
This is a basic driver for the Surface 3. I am not so sure it will work with any firmwares as most values are encoded, but given that I only have access to my current device with its firmware and I don't have the datasheet, it should be OK for now. The Surface Pen is not supported (if it is supposed to be). I'll work on this when I get one. Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Benjamin Tissoires
Dmitry Torokhov
parent
b55eb29841
commit
4feacbc24e
|
|
@ -1085,6 +1085,19 @@ config TOUCHSCREEN_SUR40
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called sur40.
|
||||
|
||||
config TOUCHSCREEN_SURFACE3_SPI
|
||||
tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
|
||||
depends on SPI
|
||||
depends on GPIOLIB || COMPILE_TEST
|
||||
help
|
||||
Say Y here if you have the Ntrig/Microsoft SPI touchscreen
|
||||
controller chip as found on the Surface 3 in your system.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called surface3_spi.
|
||||
|
||||
config TOUCHSCREEN_SX8654
|
||||
tristate "Semtech SX8654 touchscreen"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -66,6 +66,7 @@ obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
|
|||
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_SUN4I) += sun4i-ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,304 @@
|
|||
/*
|
||||
* Driver for Ntrig/Microsoft Touchscreens over SPI
|
||||
*
|
||||
* Copyright (c) 2016 Red Hat Inc.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation; version 2 of the License.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/input/mt.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/acpi.h>
|
||||
|
||||
#include <asm/unaligned.h>
|
||||
|
||||
#define SURFACE3_PACKET_SIZE 264
|
||||
|
||||
struct surface3_ts_data {
|
||||
struct spi_device *spi;
|
||||
struct gpio_desc *gpiod_rst[2];
|
||||
struct input_dev *input_dev;
|
||||
|
||||
u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned;
|
||||
};
|
||||
|
||||
struct surface3_ts_data_finger {
|
||||
u8 status;
|
||||
__le16 tracking_id;
|
||||
__le16 x;
|
||||
__le16 cx;
|
||||
__le16 y;
|
||||
__le16 cy;
|
||||
__le16 width;
|
||||
__le16 height;
|
||||
u32 padding;
|
||||
} __packed;
|
||||
|
||||
static int surface3_spi_read(struct surface3_ts_data *ts_data)
|
||||
{
|
||||
struct spi_device *spi = ts_data->spi;
|
||||
|
||||
memset(ts_data->rd_buf, 0, sizeof(ts_data->rd_buf));
|
||||
return spi_read(spi, ts_data->rd_buf, sizeof(ts_data->rd_buf));
|
||||
}
|
||||
|
||||
static void surface3_spi_report_touch(struct surface3_ts_data *ts_data,
|
||||
struct surface3_ts_data_finger *finger)
|
||||
{
|
||||
int st = finger->status & 0x01;
|
||||
int slot;
|
||||
|
||||
slot = input_mt_get_slot_by_key(ts_data->input_dev,
|
||||
get_unaligned_le16(&finger->tracking_id));
|
||||
if (slot < 0)
|
||||
return;
|
||||
|
||||
input_mt_slot(ts_data->input_dev, slot);
|
||||
input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, st);
|
||||
if (st) {
|
||||
input_report_abs(ts_data->input_dev,
|
||||
ABS_MT_POSITION_X,
|
||||
get_unaligned_le16(&finger->x));
|
||||
input_report_abs(ts_data->input_dev,
|
||||
ABS_MT_POSITION_Y,
|
||||
get_unaligned_le16(&finger->y));
|
||||
input_report_abs(ts_data->input_dev,
|
||||
ABS_MT_WIDTH_MAJOR,
|
||||
get_unaligned_le16(&finger->width));
|
||||
input_report_abs(ts_data->input_dev,
|
||||
ABS_MT_WIDTH_MINOR,
|
||||
get_unaligned_le16(&finger->height));
|
||||
}
|
||||
}
|
||||
|
||||
static void surface3_spi_process(struct surface3_ts_data *ts_data)
|
||||
{
|
||||
const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e,
|
||||
0x01, 0xd2, 0x00, 0x80, 0x01, 0x03, 0x03};
|
||||
u8 *data = ts_data->rd_buf;
|
||||
u16 timestamp;
|
||||
unsigned int i;
|
||||
|
||||
if (memcmp(header, data, sizeof(header)))
|
||||
dev_err(&ts_data->spi->dev,
|
||||
"%s header error: %*ph, ignoring...\n",
|
||||
__func__, (int)sizeof(header), data);
|
||||
|
||||
timestamp = get_unaligned_le16(&data[15]);
|
||||
|
||||
for (i = 0; i < 13; i++) {
|
||||
struct surface3_ts_data_finger *finger;
|
||||
|
||||
finger = (struct surface3_ts_data_finger *)&data[17 +
|
||||
i * sizeof(struct surface3_ts_data_finger)];
|
||||
|
||||
/*
|
||||
* When bit 5 of status is 1, it marks the end of the report:
|
||||
* - touch present: 0xe7
|
||||
* - touch released: 0xe4
|
||||
* - nothing valuable: 0xff
|
||||
*/
|
||||
if (finger->status & 0x10)
|
||||
break;
|
||||
|
||||
surface3_spi_report_touch(ts_data, finger);
|
||||
}
|
||||
|
||||
input_mt_sync_frame(ts_data->input_dev);
|
||||
input_sync(ts_data->input_dev);
|
||||
}
|
||||
|
||||
static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id)
|
||||
{
|
||||
struct surface3_ts_data *data = dev_id;
|
||||
|
||||
if (surface3_spi_read(data))
|
||||
return IRQ_HANDLED;
|
||||
|
||||
dev_dbg(&data->spi->dev, "%s received -> %*ph\n",
|
||||
__func__, SURFACE3_PACKET_SIZE, data->rd_buf);
|
||||
surface3_spi_process(data);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void surface3_spi_power(struct surface3_ts_data *data, bool on)
|
||||
{
|
||||
gpiod_set_value(data->gpiod_rst[0], on);
|
||||
gpiod_set_value(data->gpiod_rst[1], on);
|
||||
/* let the device settle a little */
|
||||
msleep(20);
|
||||
}
|
||||
|
||||
/**
|
||||
* surface3_spi_get_gpio_config - Get GPIO config from ACPI/DT
|
||||
*
|
||||
* @ts: surface3_spi_ts_data pointer
|
||||
*/
|
||||
static int surface3_spi_get_gpio_config(struct surface3_ts_data *data)
|
||||
{
|
||||
int error;
|
||||
struct device *dev;
|
||||
struct gpio_desc *gpiod;
|
||||
int i;
|
||||
|
||||
dev = &data->spi->dev;
|
||||
|
||||
/* Get the reset lines GPIO pin number */
|
||||
for (i = 0; i < 2; i++) {
|
||||
gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_OUT_LOW);
|
||||
if (IS_ERR(gpiod)) {
|
||||
error = PTR_ERR(gpiod);
|
||||
if (error != -EPROBE_DEFER)
|
||||
dev_err(dev,
|
||||
"Failed to get power GPIO %d: %d\n",
|
||||
i,
|
||||
error);
|
||||
return error;
|
||||
}
|
||||
|
||||
data->gpiod_rst[i] = gpiod;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int surface3_spi_create_input(struct surface3_ts_data *data)
|
||||
{
|
||||
struct input_dev *input;
|
||||
int error;
|
||||
|
||||
input = devm_input_allocate_device(&data->spi->dev);
|
||||
if (!input)
|
||||
return -ENOMEM;
|
||||
|
||||
data->input_dev = input;
|
||||
|
||||
input_set_abs_params(input, ABS_MT_POSITION_X, 0, 9600, 0, 0);
|
||||
input_abs_set_res(input, ABS_MT_POSITION_X, 40);
|
||||
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 7200, 0, 0);
|
||||
input_abs_set_res(input, ABS_MT_POSITION_Y, 48);
|
||||
input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 1024, 0, 0);
|
||||
input_set_abs_params(input, ABS_MT_WIDTH_MINOR, 0, 1024, 0, 0);
|
||||
input_mt_init_slots(input, 10, INPUT_MT_DIRECT);
|
||||
|
||||
input->name = "Surface3 SPI Capacitive TouchScreen";
|
||||
input->phys = "input/ts";
|
||||
input->id.bustype = BUS_SPI;
|
||||
input->id.vendor = 0x045e; /* Microsoft */
|
||||
input->id.product = 0x0000;
|
||||
input->id.version = 0x0000;
|
||||
|
||||
error = input_register_device(input);
|
||||
if (error) {
|
||||
dev_err(&data->spi->dev,
|
||||
"Failed to register input device: %d", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int surface3_spi_probe(struct spi_device *spi)
|
||||
{
|
||||
struct surface3_ts_data *data;
|
||||
int error;
|
||||
|
||||
/* Set up SPI*/
|
||||
spi->bits_per_word = 8;
|
||||
spi->mode = SPI_MODE_0;
|
||||
error = spi_setup(spi);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->spi = spi;
|
||||
spi_set_drvdata(spi, data);
|
||||
|
||||
error = surface3_spi_get_gpio_config(data);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
surface3_spi_power(data, true);
|
||||
surface3_spi_power(data, false);
|
||||
surface3_spi_power(data, true);
|
||||
|
||||
error = surface3_spi_create_input(data);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
error = devm_request_threaded_irq(&spi->dev, spi->irq,
|
||||
NULL, surface3_spi_irq_handler,
|
||||
IRQF_ONESHOT,
|
||||
"Surface3-irq", data);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused surface3_spi_suspend(struct device *dev)
|
||||
{
|
||||
struct spi_device *spi = to_spi_device(dev);
|
||||
struct surface3_ts_data *data = spi_get_drvdata(spi);
|
||||
|
||||
disable_irq(data->spi->irq);
|
||||
|
||||
surface3_spi_power(data, false);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused surface3_spi_resume(struct device *dev)
|
||||
{
|
||||
struct spi_device *spi = to_spi_device(dev);
|
||||
struct surface3_ts_data *data = spi_get_drvdata(spi);
|
||||
|
||||
surface3_spi_power(data, true);
|
||||
|
||||
enable_irq(data->spi->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(surface3_spi_pm_ops,
|
||||
surface3_spi_suspend,
|
||||
surface3_spi_resume);
|
||||
|
||||
#ifdef CONFIG_ACPI
|
||||
static const struct acpi_device_id surface3_spi_acpi_match[] = {
|
||||
{ "MSHW0037", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, surface3_spi_acpi_match);
|
||||
#endif
|
||||
|
||||
static struct spi_driver surface3_spi_driver = {
|
||||
.driver = {
|
||||
.name = "Surface3-spi",
|
||||
.acpi_match_table = ACPI_PTR(surface3_spi_acpi_match),
|
||||
.pm = &surface3_spi_pm_ops,
|
||||
},
|
||||
.probe = surface3_spi_probe,
|
||||
};
|
||||
|
||||
module_spi_driver(surface3_spi_driver);
|
||||
|
||||
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
|
||||
MODULE_DESCRIPTION("Surface 3 SPI touchscreen driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue