regulator: act8865: prepare support for other act88xx devices
This patch prepares support for other devices in the act88xx family of PMUs manufactured by Active-Semi. http://www.active-semi.com/products/power-management-units/act88xx/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Beniamino Galvani
Mark Brown
parent
bbb83f38a8
commit
50a03e35b0
|
|
@ -1,6 +1,7 @@
|
|||
/*
|
||||
* act8865-regulator.c - Voltage regulation for the active-semi ACT8865
|
||||
* http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
|
||||
* act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
|
||||
*
|
||||
* http://www.active-semi.com/products/power-management-units/act88xx/
|
||||
*
|
||||
* Copyright (C) 2013 Atmel Corporation
|
||||
*
|
||||
|
|
@ -70,7 +71,7 @@ static const struct regmap_config act8865_regmap_config = {
|
|||
.val_bits = 8,
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range act8865_volatge_ranges[] = {
|
||||
static const struct regulator_linear_range act8865_voltage_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
|
||||
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
|
||||
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
|
||||
|
|
@ -86,110 +87,35 @@ static struct regulator_ops act8865_ops = {
|
|||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
static const struct regulator_desc act8865_reg[] = {
|
||||
{
|
||||
.name = "DCDC_REG1",
|
||||
.id = ACT8865_ID_DCDC1,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_DCDC1_VSET1,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_DCDC1_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "DCDC_REG2",
|
||||
.id = ACT8865_ID_DCDC2,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_DCDC2_VSET1,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_DCDC2_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "DCDC_REG3",
|
||||
.id = ACT8865_ID_DCDC3,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_DCDC3_VSET1,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_DCDC3_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG1",
|
||||
.id = ACT8865_ID_LDO1,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO1_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO1_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG2",
|
||||
.id = ACT8865_ID_LDO2,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO2_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO2_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG3",
|
||||
.id = ACT8865_ID_LDO3,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO3_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO3_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG4",
|
||||
.id = ACT8865_ID_LDO4,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO4_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO4_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
#define ACT88xx_REG(_name, _family, _id, _vsel_reg) \
|
||||
[_family##_ID_##_id] = { \
|
||||
.name = _name, \
|
||||
.id = _family##_ID_##_id, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.ops = &act8865_ops, \
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM, \
|
||||
.linear_ranges = act8865_voltage_ranges, \
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \
|
||||
.vsel_reg = _family##_##_id##_##_vsel_reg, \
|
||||
.vsel_mask = ACT8865_VSEL_MASK, \
|
||||
.enable_reg = _family##_##_id##_CTRL, \
|
||||
.enable_mask = ACT8865_ENA, \
|
||||
.owner = THIS_MODULE, \
|
||||
}
|
||||
|
||||
static const struct regulator_desc act8865_regulators[] = {
|
||||
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1),
|
||||
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1),
|
||||
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1),
|
||||
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET),
|
||||
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET),
|
||||
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET),
|
||||
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET),
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id act8865_dt_ids[] = {
|
||||
{ .compatible = "active-semi,act8865" },
|
||||
{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
|
||||
|
|
@ -206,7 +132,9 @@ static struct of_regulator_match act8865_matches[] = {
|
|||
|
||||
static int act8865_pdata_from_dt(struct device *dev,
|
||||
struct device_node **of_node,
|
||||
struct act8865_platform_data *pdata)
|
||||
struct act8865_platform_data *pdata,
|
||||
struct of_regulator_match *matches,
|
||||
int num_matches)
|
||||
{
|
||||
int matched, i;
|
||||
struct device_node *np;
|
||||
|
|
@ -218,26 +146,25 @@ static int act8865_pdata_from_dt(struct device *dev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
matched = of_regulator_match(dev, np,
|
||||
act8865_matches, ARRAY_SIZE(act8865_matches));
|
||||
matched = of_regulator_match(dev, np, matches, num_matches);
|
||||
of_node_put(np);
|
||||
if (matched <= 0)
|
||||
return matched;
|
||||
|
||||
pdata->regulators = devm_kzalloc(dev,
|
||||
sizeof(struct act8865_regulator_data) *
|
||||
ARRAY_SIZE(act8865_matches), GFP_KERNEL);
|
||||
sizeof(struct act8865_regulator_data) *
|
||||
num_matches, GFP_KERNEL);
|
||||
if (!pdata->regulators)
|
||||
return -ENOMEM;
|
||||
|
||||
pdata->num_regulators = ARRAY_SIZE(act8865_matches);
|
||||
pdata->num_regulators = num_matches;
|
||||
regulator = pdata->regulators;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
|
||||
for (i = 0; i < num_matches; i++) {
|
||||
regulator->id = i;
|
||||
regulator->name = act8865_matches[i].name;
|
||||
regulator->platform_data = act8865_matches[i].init_data;
|
||||
of_node[i] = act8865_matches[i].of_node;
|
||||
regulator->name = matches[i].name;
|
||||
regulator->platform_data = matches[i].init_data;
|
||||
of_node[i] = matches[i].of_node;
|
||||
regulator++;
|
||||
}
|
||||
|
||||
|
|
@ -269,34 +196,59 @@ static struct regulator_init_data
|
|||
}
|
||||
|
||||
static int act8865_pmic_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *i2c_id)
|
||||
const struct i2c_device_id *i2c_id)
|
||||
{
|
||||
struct regulator_dev *rdev;
|
||||
static const struct regulator_desc *regulators;
|
||||
struct act8865_platform_data pdata_of, *pdata;
|
||||
struct of_regulator_match *matches;
|
||||
struct device *dev = &client->dev;
|
||||
struct act8865_platform_data *pdata = dev_get_platdata(dev);
|
||||
struct regulator_config config = { };
|
||||
struct device_node **of_node;
|
||||
int i, ret, num_regulators;
|
||||
struct act8865 *act8865;
|
||||
struct device_node *of_node[ACT8865_REG_NUM];
|
||||
int i;
|
||||
int ret;
|
||||
unsigned long type;
|
||||
|
||||
pdata = dev_get_platdata(dev);
|
||||
|
||||
if (dev->of_node && !pdata) {
|
||||
const struct of_device_id *id;
|
||||
struct act8865_platform_data pdata_of;
|
||||
|
||||
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
|
||||
if (!id)
|
||||
return -ENODEV;
|
||||
|
||||
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
|
||||
type = (unsigned long) id->data;
|
||||
} else {
|
||||
type = i2c_id->driver_data;
|
||||
}
|
||||
|
||||
switch (type) {
|
||||
case ACT8865:
|
||||
matches = act8865_matches;
|
||||
regulators = act8865_regulators;
|
||||
num_regulators = ARRAY_SIZE(act8865_regulators);
|
||||
break;
|
||||
default:
|
||||
dev_err(dev, "invalid device id %lu\n", type);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
of_node = devm_kzalloc(dev, sizeof(struct device_node *) *
|
||||
num_regulators, GFP_KERNEL);
|
||||
if (!of_node)
|
||||
return -ENOMEM;
|
||||
|
||||
if (dev->of_node && !pdata) {
|
||||
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of, matches,
|
||||
num_regulators);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
pdata = &pdata_of;
|
||||
}
|
||||
|
||||
if (pdata->num_regulators > ACT8865_REG_NUM) {
|
||||
dev_err(dev, "Too many regulators found!\n");
|
||||
if (pdata->num_regulators > num_regulators) {
|
||||
dev_err(dev, "too many regulators: %d\n",
|
||||
pdata->num_regulators);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
|
@ -313,8 +265,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
/* Finally register devices */
|
||||
for (i = 0; i < ACT8865_REG_NUM; i++) {
|
||||
const struct regulator_desc *desc = &act8865_reg[i];
|
||||
for (i = 0; i < num_regulators; i++) {
|
||||
const struct regulator_desc *desc = ®ulators[i];
|
||||
struct regulator_config config = { };
|
||||
struct regulator_dev *rdev;
|
||||
|
||||
config.dev = dev;
|
||||
config.init_data = act8865_get_init_data(desc->id, pdata);
|
||||
|
|
@ -330,12 +284,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
i2c_set_clientdata(client, act8865);
|
||||
devm_kfree(dev, of_node);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id act8865_ids[] = {
|
||||
{ "act8865", 0 },
|
||||
{ .name = "act8865", .driver_data = ACT8865 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, act8865_ids);
|
||||
|
|
@ -351,6 +306,6 @@ static struct i2c_driver act8865_pmic_driver = {
|
|||
|
||||
module_i2c_driver(act8865_pmic_driver);
|
||||
|
||||
MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
|
||||
MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver");
|
||||
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* act8865.h -- Voltage regulation for the active-semi act8865
|
||||
* act8865.h -- Voltage regulation for active-semi act88xx PMUs
|
||||
*
|
||||
* Copyright (C) 2013 Atmel Corporation.
|
||||
*
|
||||
|
|
@ -29,6 +29,10 @@ enum {
|
|||
ACT8865_REG_NUM,
|
||||
};
|
||||
|
||||
enum {
|
||||
ACT8865,
|
||||
};
|
||||
|
||||
/**
|
||||
* act8865_regulator_data - regulator data
|
||||
* @id: regulator id
|
||||
|
|
|
|||
Loading…
Reference in New Issue