p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ARM: dts: vf610-zii-dev: Wire up devel C switch interrupts 

The devel B and devel C board use the same GPIO lines for interrupts
from the two switches. Move the pinmux nodes from devel B into the
shared .dtsi file, and wire up the interrupts on devel C.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Andrew Lunn 2017-03-08 03:50:12 +01:00 committed by Shawn Guo
parent e3abb14e81
commit 51dab7d9a2
3 changed files with 24 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
View File

@ -459,18 +459,6 @@ VF610_PAD_PTB18__GPIO_40 0x33e2
>;
};
pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
fsl,pins = <
VF610_PAD_PTB5__GPIO_27 0x219d
>;
};
pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
fsl,pins = <
VF610_PAD_PTB4__GPIO_26 0x219d
>;
};
pinctrl_mdio_mux: pinctrl-mdio-mux {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2

12
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
View File

@ -67,11 +67,17 @@ mdio_mux_1: mdio@1 {
switch0: switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <512>;
interrupt-parent = <&gpio0>;
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
ports {
#address-cells = <1>;
@ -125,11 +131,17 @@ mdio_mux_2: mdio@2 {
switch1: switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch1>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
eeprom-length = <512>;
interrupt-parent = <&gpio0>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
ports {
#address-cells = <1>;

12
arch/arm/boot/dts/vf610-zii-dev.dtsi
View File

@ -296,6 +296,18 @@ VF610_PAD_PTB18__GPIO_40 0x33e2
>;
};
pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
fsl,pins = <
VF610_PAD_PTB5__GPIO_27 0x219d
>;
};
pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
fsl,pins = <
VF610_PAD_PTB4__GPIO_26 0x219d
>;
};
pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
fsl,pins = <
VF610_PAD_PTE14__GPIO_119 0x31c2