MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue
Sanitize FCSR Cause bit handling, following a trail of past attempts: * commit4249548454
("MIPS: ptrace: Fix FP context restoration FCSR regression"), * commit443c44032a
("MIPS: Always clear FCSR cause bits after emulation"), * commit64bedffe49
("MIPS: Clear [MSA]FPE CSR.Cause after notify_die()"), * commitb1442d39fa
("MIPS: Prevent user from setting FCSR cause bits"), * commit b54d2901517d ("Properly handle branch delay slots in connection with signals."). Specifically do not mask these bits out in ptrace(2) processing and send a SIGFPE signal instead whenever a matching pair of an FCSR Cause and Enable bit is seen as execution of an affected context is about to resume. Only then clear Cause bits, and even then do not clear any bits that are set but masked with the respective Enable bits. Adjust Cause bit clearing throughout code likewise, except within the FPU emulator proper where they are set according to IEEE 754 exceptions raised as the operation emulated executed. Do so so that any IEEE 754 exceptions subject to their default handling are recorded like with operations executed by FPU hardware. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
parent
c9e5603974
commit
5a1aca4469
|
@ -63,6 +63,8 @@ do { \
|
|||
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
|
||||
struct mips_fpu_struct *ctx, int has_fpu,
|
||||
void *__user *fault_addr);
|
||||
void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
|
||||
struct task_struct *tsk);
|
||||
int process_fpemu_return(int sig, void __user *fault_addr,
|
||||
unsigned long fcr31);
|
||||
int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
|
||||
|
@ -81,4 +83,15 @@ static inline void fpu_emulator_init_fpu(void)
|
|||
set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN);
|
||||
}
|
||||
|
||||
/*
|
||||
* Mask the FCSR Cause bits according to the Enable bits, observing
|
||||
* that Unimplemented is always enabled.
|
||||
*/
|
||||
static inline unsigned long mask_fcr31_x(unsigned long fcr31)
|
||||
{
|
||||
return fcr31 & (FPU_CSR_UNI_X |
|
||||
((fcr31 & FPU_CSR_ALL_E) <<
|
||||
(ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E))));
|
||||
}
|
||||
|
||||
#endif /* _ASM_FPU_EMULATOR_H */
|
||||
|
|
|
@ -75,6 +75,22 @@ do { if (cpu_has_rw_llb) { \
|
|||
} \
|
||||
} while (0)
|
||||
|
||||
/*
|
||||
* Check FCSR for any unmasked exceptions pending set with `ptrace',
|
||||
* clear them and send a signal.
|
||||
*/
|
||||
#define __sanitize_fcr31(next) \
|
||||
do { \
|
||||
unsigned long fcr31 = mask_fcr31_x(next->thread.fpu.fcr31); \
|
||||
void __user *pc; \
|
||||
\
|
||||
if (unlikely(fcr31)) { \
|
||||
pc = (void __user *)task_pt_regs(next)->cp0_epc; \
|
||||
next->thread.fpu.fcr31 &= ~fcr31; \
|
||||
force_fcr31_sig(fcr31, pc, next); \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
/*
|
||||
* For newly created kernel threads switch_to() will return to
|
||||
* ret_from_kernel_thread, newly created user threads to ret_from_fork.
|
||||
|
@ -85,6 +101,8 @@ do { if (cpu_has_rw_llb) { \
|
|||
do { \
|
||||
__mips_mt_fpaff_switch_to(prev); \
|
||||
lose_fpu_inatomic(1, prev); \
|
||||
if (tsk_used_math(next)) \
|
||||
__sanitize_fcr31(next); \
|
||||
if (cpu_has_dsp) { \
|
||||
__save_dsp(prev); \
|
||||
__restore_dsp(next); \
|
||||
|
|
|
@ -899,7 +899,7 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
|
|||
* mipsr2_decoder: Decode and emulate a MIPS R2 instruction
|
||||
* @regs: Process register set
|
||||
* @inst: Instruction to decode and emulate
|
||||
* @fcr31: Floating Point Control and Status Register returned
|
||||
* @fcr31: Floating Point Control and Status Register Cause bits returned
|
||||
*/
|
||||
int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
|
||||
{
|
||||
|
@ -1172,13 +1172,13 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
|
|||
|
||||
err = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0,
|
||||
&fault_addr);
|
||||
*fcr31 = current->thread.fpu.fcr31;
|
||||
|
||||
/*
|
||||
* We can't allow the emulated instruction to leave any of
|
||||
* the cause bits set in $fcr31.
|
||||
* We can't allow the emulated instruction to leave any
|
||||
* enabled Cause bits set in $fcr31.
|
||||
*/
|
||||
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
|
||||
*fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31);
|
||||
current->thread.fpu.fcr31 &= ~res;
|
||||
|
||||
/*
|
||||
* this is a tricky issue - lose_fpu() uses LL/SC atomics
|
||||
|
|
|
@ -79,16 +79,15 @@ void ptrace_disable(struct task_struct *child)
|
|||
}
|
||||
|
||||
/*
|
||||
* Poke at FCSR according to its mask. Don't set the cause bits as
|
||||
* this is currently not handled correctly in FP context restoration
|
||||
* and will cause an oops if a corresponding enable bit is set.
|
||||
* Poke at FCSR according to its mask. Set the Cause bits even
|
||||
* if a corresponding Enable bit is set. This will be noticed at
|
||||
* the time the thread is switched to and SIGFPE thrown accordingly.
|
||||
*/
|
||||
static void ptrace_setfcr31(struct task_struct *child, u32 value)
|
||||
{
|
||||
u32 fcr31;
|
||||
u32 mask;
|
||||
|
||||
value &= ~FPU_CSR_ALL_X;
|
||||
fcr31 = child->thread.fpu.fcr31;
|
||||
mask = boot_cpu_data.fpu_msk31;
|
||||
child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
|
||||
|
|
|
@ -708,6 +708,32 @@ asmlinkage void do_ov(struct pt_regs *regs)
|
|||
exception_exit(prev_state);
|
||||
}
|
||||
|
||||
/*
|
||||
* Send SIGFPE according to FCSR Cause bits, which must have already
|
||||
* been masked against Enable bits. This is impotant as Inexact can
|
||||
* happen together with Overflow or Underflow, and `ptrace' can set
|
||||
* any bits.
|
||||
*/
|
||||
void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
|
||||
struct task_struct *tsk)
|
||||
{
|
||||
struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE };
|
||||
|
||||
if (fcr31 & FPU_CSR_INV_X)
|
||||
si.si_code = FPE_FLTINV;
|
||||
else if (fcr31 & FPU_CSR_DIV_X)
|
||||
si.si_code = FPE_FLTDIV;
|
||||
else if (fcr31 & FPU_CSR_OVF_X)
|
||||
si.si_code = FPE_FLTOVF;
|
||||
else if (fcr31 & FPU_CSR_UDF_X)
|
||||
si.si_code = FPE_FLTUND;
|
||||
else if (fcr31 & FPU_CSR_INE_X)
|
||||
si.si_code = FPE_FLTRES;
|
||||
else
|
||||
si.si_code = __SI_FAULT;
|
||||
force_sig_info(SIGFPE, &si, tsk);
|
||||
}
|
||||
|
||||
int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
|
||||
{
|
||||
struct siginfo si = { 0 };
|
||||
|
@ -718,27 +744,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
|
|||
return 0;
|
||||
|
||||
case SIGFPE:
|
||||
si.si_addr = fault_addr;
|
||||
si.si_signo = sig;
|
||||
/*
|
||||
* Inexact can happen together with Overflow or Underflow.
|
||||
* Respect the mask to deliver the correct exception.
|
||||
*/
|
||||
fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
|
||||
(ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
|
||||
if (fcr31 & FPU_CSR_INV_X)
|
||||
si.si_code = FPE_FLTINV;
|
||||
else if (fcr31 & FPU_CSR_DIV_X)
|
||||
si.si_code = FPE_FLTDIV;
|
||||
else if (fcr31 & FPU_CSR_OVF_X)
|
||||
si.si_code = FPE_FLTOVF;
|
||||
else if (fcr31 & FPU_CSR_UDF_X)
|
||||
si.si_code = FPE_FLTUND;
|
||||
else if (fcr31 & FPU_CSR_INE_X)
|
||||
si.si_code = FPE_FLTRES;
|
||||
else
|
||||
si.si_code = __SI_FAULT;
|
||||
force_sig_info(sig, &si, current);
|
||||
force_fcr31_sig(fcr31, fault_addr, current);
|
||||
return 1;
|
||||
|
||||
case SIGBUS:
|
||||
|
@ -802,13 +808,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
|
|||
/* Run the emulator */
|
||||
sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
|
||||
&fault_addr);
|
||||
fcr31 = current->thread.fpu.fcr31;
|
||||
|
||||
/*
|
||||
* We can't allow the emulated instruction to leave any of
|
||||
* the cause bits set in $fcr31.
|
||||
* We can't allow the emulated instruction to leave any
|
||||
* enabled Cause bits set in $fcr31.
|
||||
*/
|
||||
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
|
||||
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
|
||||
current->thread.fpu.fcr31 &= ~fcr31;
|
||||
|
||||
/* Restore the hardware register state */
|
||||
own_fpu(1);
|
||||
|
@ -834,7 +840,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
|
|||
goto out;
|
||||
|
||||
/* Clear FCSR.Cause before enabling interrupts */
|
||||
write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X);
|
||||
write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31));
|
||||
local_irq_enable();
|
||||
|
||||
die_if_kernel("FP exception in kernel code", regs);
|
||||
|
@ -856,13 +862,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
|
|||
/* Run the emulator */
|
||||
sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
|
||||
&fault_addr);
|
||||
fcr31 = current->thread.fpu.fcr31;
|
||||
|
||||
/*
|
||||
* We can't allow the emulated instruction to leave any of
|
||||
* the cause bits set in $fcr31.
|
||||
* We can't allow the emulated instruction to leave any
|
||||
* enabled Cause bits set in $fcr31.
|
||||
*/
|
||||
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
|
||||
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
|
||||
current->thread.fpu.fcr31 &= ~fcr31;
|
||||
|
||||
/* Restore the hardware register state */
|
||||
own_fpu(1); /* Using the FPU again. */
|
||||
|
@ -1427,13 +1433,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
|
|||
|
||||
sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0,
|
||||
&fault_addr);
|
||||
fcr31 = current->thread.fpu.fcr31;
|
||||
|
||||
/*
|
||||
* We can't allow the emulated instruction to leave
|
||||
* any of the cause bits set in $fcr31.
|
||||
* any enabled Cause bits set in $fcr31.
|
||||
*/
|
||||
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
|
||||
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
|
||||
current->thread.fpu.fcr31 &= ~fcr31;
|
||||
|
||||
/* Send a signal if required. */
|
||||
if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
|
||||
|
|
Loading…
Reference in New Issue