diff --git a/Documentation/devicetree/bindings/regulator/ltc3676.txt b/Documentation/devicetree/bindings/regulator/ltc3676.txt
new file mode 100644
index 000000000000..d4eb366ce18c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ltc3676.txt
@@ -0,0 +1,94 @@
+Linear Technology LTC3676 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3676"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4,
+  ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+  documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+  values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from:
+412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between
+0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V.
+
+Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
+0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V.  The ldo1 standby
+regulator can not be disabled and thus should have the regulator-always-on
+property set.
+
+Example:
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <200400>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <130800>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <168400>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt
index 38a614210dcb..e6e4b9c82d89 100644
--- a/Documentation/devicetree/bindings/regulator/pv88080.txt
+++ b/Documentation/devicetree/bindings/regulator/pv88080.txt
@@ -1,22 +1,28 @@
 * Powerventure Semiconductor PV88080 Voltage Regulator
 
 Required properties:
-- compatible: "pvs,pv88080".
-- reg: I2C slave address, usually 0x49.
+- compatible: Must be one of the following, depending on the
+  silicon version:
+	- "pvs,pv88080" (DEPRECATED)
+
+	- "pvs,pv88080-aa" for PV88080 AA or AB silicon
+	- "pvs,pv88080-ba" for PV88080 BA or BB silicon
+  NOTE: The use of the compatibles with no silicon version is deprecated.
+- reg: I2C slave address, usually 0x49
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
   device. Each sub-node is identified using the node's name, with valid
   values listed below. The content of each sub-node is defined by the
   standard binding for regulators; see regulator.txt.
-  BUCK1, BUCK2, and BUCK3.
+  BUCK1, BUCK2, BUCK3 and HVBUCK.
 
 Optional properties:
 - Any optional property defined in regulator.txt
 
-Example
+Example:
 
 	pmic: pv88080@49 {
-		compatible = "pvs,pv88080";
+		compatible = "pvs,pv88080-ba";
 		reg = <0x49>;
 		interrupt-parent = <&gpio>;
 		interrupts = <24 24>;
@@ -45,5 +51,12 @@ Example
 				regulator-min-microamp 	= <1496000>;
 				regulator-max-microamp 	= <4189000>;
 			};
+
+			HVBUCK {
+				regulator-name = "hvbuck";
+				regulator-min-microvolt = <   5000>;
+				regulator-max-microvolt = <1275000>;
+ 			};
 		};
 	};
+
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index ecfc593cac15..6ab5aef619d9 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
 - regulator-allow-bypass: allow the regulator to go into bypass mode
 - regulator-allow-set-load: allow the regulator performance level to be configured
 - <name>-supply: phandle to the parent supply/regulator node
-- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-ramp-delay: ramp delay for regulator(in uV/us)
   For hardware which supports disabling ramp rate, it should be explicitly
   initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
 - regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
index 80b9dc363cd8..ba610adbdbff 100644
--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -219,6 +219,7 @@ static int tps65218_probe(struct i2c_client *client,
 	struct tps65218 *tps;
 	const struct of_device_id *match;
 	int ret;
+	unsigned int chipid;
 
 	match = of_match_device(of_tps65218_match_table, &client->dev);
 	if (!match) {
@@ -250,6 +251,14 @@ static int tps65218_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	ret = tps65218_reg_read(tps, TPS65218_REG_CHIPID, &chipid);
+	if (ret) {
+		dev_err(tps->dev, "Failed to read chipid: %d\n", ret);
+		return ret;
+	}
+
+	tps->rev = chipid & TPS65218_CHIPID_REV_MASK;
+
 	ret = of_platform_populate(client->dev.of_node, NULL, NULL,
 				   &client->dev);
 	if (ret < 0)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6c88e31c01f7..4c2631a2bb3c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -353,6 +353,14 @@ config REGULATOR_LTC3589
 	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
 	  8-output regulators controlled via I2C.
 
+config REGULATOR_LTC3676
+	tristate "LTC3676 8-output voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This enables support for the LTC3676
+	  8-output regulators controlled via I2C.
+
 config REGULATOR_MAX14577
 	tristate "Maxim 14577/77836 regulator"
 	depends on MFD_MAX14577
@@ -820,7 +828,7 @@ config REGULATOR_TPS65912
 	    This driver supports TPS65912 voltage regulator chip.
 
 config REGULATOR_TPS80031
-	tristate "TI TPS80031/TPS80032 power regualtor driver"
+	tristate "TI TPS80031/TPS80032 power regulator driver"
 	depends on MFD_TPS80031
 	help
 	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index f3da9eea9ab6..2142a5d3fc08 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
 obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
+obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index db320e8fa865..67426c0477d3 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev)
 	    !rdev->desc->ops->set_load)
 		return -EINVAL;
 
-	/* get output voltage */
-	output_uV = _regulator_get_voltage(rdev);
-	if (output_uV <= 0) {
-		rdev_err(rdev, "invalid output voltage found\n");
-		return -EINVAL;
-	}
-
-	/* get input voltage */
-	input_uV = 0;
-	if (rdev->supply)
-		input_uV = regulator_get_voltage(rdev->supply);
-	if (input_uV <= 0)
-		input_uV = rdev->constraints->input_uV;
-	if (input_uV <= 0) {
-		rdev_err(rdev, "invalid input voltage found\n");
-		return -EINVAL;
-	}
-
 	/* calc total requested load */
 	list_for_each_entry(sibling, &rdev->consumer_list, list)
 		current_uA += sibling->uA_load;
@@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev)
 		if (err < 0)
 			rdev_err(rdev, "failed to set load %d\n", current_uA);
 	} else {
+		/* get output voltage */
+		output_uV = _regulator_get_voltage(rdev);
+		if (output_uV <= 0) {
+			rdev_err(rdev, "invalid output voltage found\n");
+			return -EINVAL;
+		}
+
+		/* get input voltage */
+		input_uV = 0;
+		if (rdev->supply)
+			input_uV = regulator_get_voltage(rdev->supply);
+		if (input_uV <= 0)
+			input_uV = rdev->constraints->input_uV;
+		if (input_uV <= 0) {
+			rdev_err(rdev, "invalid input voltage found\n");
+			return -EINVAL;
+		}
+
 		/* now get the optimum mode for our new total regulator load */
 		mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
 							 output_uV, current_uA);
@@ -2743,6 +2743,24 @@ static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
+static int _regulator_set_voltage_time(struct regulator_dev *rdev,
+				       int old_uV, int new_uV)
+{
+	unsigned int ramp_delay = 0;
+
+	if (rdev->constraints->ramp_delay)
+		ramp_delay = rdev->constraints->ramp_delay;
+	else if (rdev->desc->ramp_delay)
+		ramp_delay = rdev->desc->ramp_delay;
+
+	if (ramp_delay == 0) {
+		rdev_warn(rdev, "ramp_delay not set\n");
+		return 0;
+	}
+
+	return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
+}
+
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
 {
@@ -2751,6 +2769,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	int best_val = 0;
 	unsigned int selector;
 	int old_selector = -1;
+	const struct regulator_ops *ops = rdev->desc->ops;
+	int old_uV = _regulator_get_voltage(rdev);
 
 	trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
 
@@ -2762,29 +2782,28 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	 * info to call set_voltage_time_sel().
 	 */
 	if (_regulator_is_enabled(rdev) &&
-	    rdev->desc->ops->set_voltage_time_sel &&
-	    rdev->desc->ops->get_voltage_sel) {
-		old_selector = rdev->desc->ops->get_voltage_sel(rdev);
+	    ops->set_voltage_time_sel && ops->get_voltage_sel) {
+		old_selector = ops->get_voltage_sel(rdev);
 		if (old_selector < 0)
 			return old_selector;
 	}
 
-	if (rdev->desc->ops->set_voltage) {
+	if (ops->set_voltage) {
 		ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
 						  &selector);
 
 		if (ret >= 0) {
-			if (rdev->desc->ops->list_voltage)
-				best_val = rdev->desc->ops->list_voltage(rdev,
-									 selector);
+			if (ops->list_voltage)
+				best_val = ops->list_voltage(rdev,
+							     selector);
 			else
 				best_val = _regulator_get_voltage(rdev);
 		}
 
-	} else if (rdev->desc->ops->set_voltage_sel) {
+	} else if (ops->set_voltage_sel) {
 		ret = regulator_map_voltage(rdev, min_uV, max_uV);
 		if (ret >= 0) {
-			best_val = rdev->desc->ops->list_voltage(rdev, ret);
+			best_val = ops->list_voltage(rdev, ret);
 			if (min_uV <= best_val && max_uV >= best_val) {
 				selector = ret;
 				if (old_selector == selector)
@@ -2800,34 +2819,50 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		ret = -EINVAL;
 	}
 
-	/* Call set_voltage_time_sel if successfully obtained old_selector */
-	if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0
-		&& old_selector != selector) {
+	if (ret)
+		goto out;
 
-		delay = rdev->desc->ops->set_voltage_time_sel(rdev,
-						old_selector, selector);
-		if (delay < 0) {
-			rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
-				  delay);
-			delay = 0;
-		}
-
-		/* Insert any necessary delays */
-		if (delay >= 1000) {
-			mdelay(delay / 1000);
-			udelay(delay % 1000);
-		} else if (delay) {
-			udelay(delay);
+	if (ops->set_voltage_time_sel) {
+		/*
+		 * Call set_voltage_time_sel if successfully obtained
+		 * old_selector
+		 */
+		if (old_selector >= 0 && old_selector != selector)
+			delay = ops->set_voltage_time_sel(rdev, old_selector,
+							  selector);
+	} else {
+		if (old_uV != best_val) {
+			if (ops->set_voltage_time)
+				delay = ops->set_voltage_time(rdev, old_uV,
+							      best_val);
+			else
+				delay = _regulator_set_voltage_time(rdev,
+								    old_uV,
+								    best_val);
 		}
 	}
 
-	if (ret == 0 && best_val >= 0) {
+	if (delay < 0) {
+		rdev_warn(rdev, "failed to get delay: %d\n", delay);
+		delay = 0;
+	}
+
+	/* Insert any necessary delays */
+	if (delay >= 1000) {
+		mdelay(delay / 1000);
+		udelay(delay % 1000);
+	} else if (delay) {
+		udelay(delay);
+	}
+
+	if (best_val >= 0) {
 		unsigned long data = best_val;
 
 		_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
 				     (void *)data);
 	}
 
+out:
 	trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
 
 	return ret;
@@ -2998,9 +3033,13 @@ int regulator_set_voltage_time(struct regulator *regulator,
 	int voltage;
 	int i;
 
+	if (ops->set_voltage_time)
+		return ops->set_voltage_time(rdev, old_uV, new_uV);
+	else if (!ops->set_voltage_time_sel)
+		return _regulator_set_voltage_time(rdev, old_uV, new_uV);
+
 	/* Currently requires operations to do this */
-	if (!ops->list_voltage || !ops->set_voltage_time_sel
-	    || !rdev->desc->n_voltages)
+	if (!ops->list_voltage || !rdev->desc->n_voltages)
 		return -EINVAL;
 
 	for (i = 0; i < rdev->desc->n_voltages; i++) {
@@ -3039,19 +3078,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 				   unsigned int old_selector,
 				   unsigned int new_selector)
 {
-	unsigned int ramp_delay = 0;
 	int old_volt, new_volt;
 
-	if (rdev->constraints->ramp_delay)
-		ramp_delay = rdev->constraints->ramp_delay;
-	else if (rdev->desc->ramp_delay)
-		ramp_delay = rdev->desc->ramp_delay;
-
-	if (ramp_delay == 0) {
-		rdev_warn(rdev, "ramp_delay not set\n");
-		return 0;
-	}
-
 	/* sanity check */
 	if (!rdev->desc->ops->list_voltage)
 		return -EINVAL;
@@ -3059,7 +3087,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 	old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
 	new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
 
-	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+	if (rdev->desc->ops->set_voltage_time)
+		return rdev->desc->ops->set_voltage_time(rdev, old_volt,
+							 new_volt);
+	else
+		return _regulator_set_voltage_time(rdev, old_volt, new_volt);
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
 
@@ -3483,10 +3515,8 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
 		consumers[i].consumer = NULL;
 
 	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = _regulator_get(dev,
-						       consumers[i].supply,
-						       false,
-						       !consumers[i].optional);
+		consumers[i].consumer = regulator_get(dev,
+						      consumers[i].supply);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
 			dev_err(dev, "Failed to get supply '%s': %d\n",
diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c
index 3963dfad766c..8976141c1438 100644
--- a/drivers/regulator/dbx500-prcmu.c
+++ b/drivers/regulator/dbx500-prcmu.c
@@ -75,24 +75,6 @@ static struct ux500_regulator_debug {
 	u8 *state_after_suspend;
 } rdebug;
 
-void ux500_regulator_suspend_debug(void)
-{
-	int i;
-
-	for (i = 0; i < rdebug.num_regulators; i++)
-		rdebug.state_before_suspend[i] =
-			rdebug.regulator_array[i].is_enabled;
-}
-
-void ux500_regulator_resume_debug(void)
-{
-	int i;
-
-	for (i = 0; i < rdebug.num_regulators; i++)
-		rdebug.state_after_suspend[i] =
-			rdebug.regulator_array[i].is_enabled;
-}
-
 static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p)
 {
 	/* print power state count */
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 6ad8ab4c578d..6ec1d400adae 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -164,11 +164,8 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers,
 		consumers[i].consumer = NULL;
 
 	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = _devm_regulator_get(dev,
-							    consumers[i].supply,
-							    consumers[i].optional ?
-								OPTIONAL_GET :
-								NORMAL_GET);
+		consumers[i].consumer = devm_regulator_get(dev,
+							   consumers[i].supply);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
 			dev_err(dev, "Failed to get supply '%s': %d\n",
diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index 42dc5fb8c899..62c5f5445d44 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -477,7 +477,8 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 	return 0;
 }
 
-unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
+static unsigned int
+hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 			int input_uV, int output_uV, int load_uA)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c
new file mode 100644
index 000000000000..e2b476ca2b4d
--- /dev/null
+++ b/drivers/regulator/ltc3676.c
@@ -0,0 +1,420 @@
+/*
+ * Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define DRIVER_NAME		"ltc3676"
+
+/* LTC3676 Registers */
+#define LTC3676_BUCK1     0x01
+#define LTC3676_BUCK2     0x02
+#define LTC3676_BUCK3     0x03
+#define LTC3676_BUCK4     0x04
+#define LTC3676_LDOA      0x05
+#define LTC3676_LDOB      0x06
+#define LTC3676_SQD1      0x07
+#define LTC3676_SQD2      0x08
+#define LTC3676_CNTRL     0x09
+#define LTC3676_DVB1A     0x0A
+#define LTC3676_DVB1B     0x0B
+#define LTC3676_DVB2A     0x0C
+#define LTC3676_DVB2B     0x0D
+#define LTC3676_DVB3A     0x0E
+#define LTC3676_DVB3B     0x0F
+#define LTC3676_DVB4A     0x10
+#define LTC3676_DVB4B     0x11
+#define LTC3676_MSKIRQ    0x12
+#define LTC3676_MSKPG     0x13
+#define LTC3676_USER      0x14
+#define LTC3676_IRQSTAT   0x15
+#define LTC3676_PGSTATL   0x16
+#define LTC3676_PGSTATRT  0x17
+#define LTC3676_HRST      0x1E
+#define LTC3676_CLIRQ     0x1F
+
+#define LTC3676_DVBxA_REF_SELECT	BIT(5)
+
+#define LTC3676_IRQSTAT_PGOOD_TIMEOUT	BIT(3)
+#define LTC3676_IRQSTAT_UNDERVOLT_WARN	BIT(4)
+#define LTC3676_IRQSTAT_UNDERVOLT_FAULT	BIT(5)
+#define LTC3676_IRQSTAT_THERMAL_WARN	BIT(6)
+#define LTC3676_IRQSTAT_THERMAL_FAULT	BIT(7)
+
+enum ltc3676_reg {
+	LTC3676_SW1,
+	LTC3676_SW2,
+	LTC3676_SW3,
+	LTC3676_SW4,
+	LTC3676_LDO1,
+	LTC3676_LDO2,
+	LTC3676_LDO3,
+	LTC3676_LDO4,
+	LTC3676_NUM_REGULATORS,
+};
+
+struct ltc3676 {
+	struct regmap *regmap;
+	struct device *dev;
+	struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS];
+	struct regulator_dev *regulators[LTC3676_NUM_REGULATORS];
+};
+
+static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
+	struct device *dev = ltc3676->dev;
+	int dcdc = rdev_get_id(rdev);
+	int sel;
+
+	dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV);
+	sel = regulator_map_voltage_linear(rdev, uV, uV);
+	if (sel < 0)
+		return sel;
+
+	/* DVBB register follows right after the corresponding DVBA register */
+	return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
+				  rdev->desc->vsel_mask, sel);
+}
+
+static int ltc3676_set_suspend_mode(struct regulator_dev *rdev,
+				    unsigned int mode)
+{
+	struct ltc3676 *ltc3676= rdev_get_drvdata(rdev);
+	struct device *dev = ltc3676->dev;
+	int mask, val;
+	int dcdc = rdev_get_id(rdev);
+
+	dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode);
+
+	mask = LTC3676_DVBxA_REF_SELECT;
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = 0; /* select DVBxA */
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */
+		break;
+	default:
+		dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
+			 rdev->desc->name, mode);
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg,
+				  mask, val);
+}
+
+static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2)
+{
+	uint64_t tmp;
+	if (uV == 0)
+		return 0;
+	tmp = (uint64_t)uV * r1;
+	do_div(tmp, r2);
+	return uV + (unsigned int)tmp;
+}
+
+static int ltc3676_of_parse_cb(struct device_node *np,
+			       const struct regulator_desc *desc,
+			       struct regulator_config *config)
+{
+	struct ltc3676 *ltc3676 = config->driver_data;
+	struct regulator_desc *rdesc = &ltc3676->regulator_descs[desc->id];
+	u32 r[2];
+	int ret;
+
+	/* LDO3 has a fixed output */
+	if (desc->id == LTC3676_LDO3)
+		return 0;
+
+	ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2);
+	if (ret) {
+		dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n",
+			ret);
+		return ret;
+	}
+
+	rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]);
+	rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]);
+	rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]);
+
+	return 0;
+}
+
+/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
+static struct regulator_ops ltc3676_linear_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_suspend_voltage = ltc3676_set_suspend_voltage,
+	.set_suspend_mode = ltc3676_set_suspend_mode,
+};
+
+/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
+static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
+};
+
+/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
+static struct regulator_ops ltc3676_fixed_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask)   \
+	[LTC3676_ ## _id] = {                                        \
+		.name = #_name,                                \
+		.of_match = of_match_ptr(#_name),              \
+		.regulators_node = of_match_ptr("regulators"), \
+		.of_parse_cb = ltc3676_of_parse_cb,            \
+		.n_voltages = (dvb_mask) + 1,                  \
+		.min_uV = (dvba_reg) ? 412500 : 0,             \
+		.uV_step = (dvba_reg) ? 12500 : 0,             \
+		.ramp_delay = (dvba_reg) ? 800 : 0,            \
+		.fixed_uV = (dvb_mask) ? 0 : 725000,           \
+		.ops = &ltc3676_ ## _ops ## _regulator_ops,    \
+		.type = REGULATOR_VOLTAGE,                     \
+		.id = LTC3676_ ## _id,                         \
+		.owner = THIS_MODULE,                          \
+		.vsel_reg = (dvba_reg),                        \
+		.vsel_mask = (dvb_mask),                       \
+		.enable_reg = (en_reg),                        \
+		.enable_mask = (1 << en_bit),                  \
+	}
+
+#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba)                     \
+	LTC3676_REG(_id, _name, linear,                                \
+		    LTC3676_ ## _en, 7,                                \
+		    LTC3676_ ## _dvba, 0x1f)
+
+#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit)                \
+	LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
+
+static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
+	LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
+	LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
+	LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),
+	LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A),
+	LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
+	LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2),
+	LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
+	LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
+};
+
+static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTC3676_IRQSTAT:
+	case LTC3676_BUCK1:
+	case LTC3676_BUCK2:
+	case LTC3676_BUCK3:
+	case LTC3676_BUCK4:
+	case LTC3676_LDOA:
+	case LTC3676_LDOB:
+	case LTC3676_SQD1:
+	case LTC3676_SQD2:
+	case LTC3676_CNTRL:
+	case LTC3676_DVB1A:
+	case LTC3676_DVB1B:
+	case LTC3676_DVB2A:
+	case LTC3676_DVB2B:
+	case LTC3676_DVB3A:
+	case LTC3676_DVB3B:
+	case LTC3676_DVB4A:
+	case LTC3676_DVB4B:
+	case LTC3676_MSKIRQ:
+	case LTC3676_MSKPG:
+	case LTC3676_USER:
+	case LTC3676_HRST:
+	case LTC3676_CLIRQ:
+		return true;
+	}
+	return false;
+}
+
+static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTC3676_IRQSTAT:
+	case LTC3676_BUCK1:
+	case LTC3676_BUCK2:
+	case LTC3676_BUCK3:
+	case LTC3676_BUCK4:
+	case LTC3676_LDOA:
+	case LTC3676_LDOB:
+	case LTC3676_SQD1:
+	case LTC3676_SQD2:
+	case LTC3676_CNTRL:
+	case LTC3676_DVB1A:
+	case LTC3676_DVB1B:
+	case LTC3676_DVB2A:
+	case LTC3676_DVB2B:
+	case LTC3676_DVB3A:
+	case LTC3676_DVB3B:
+	case LTC3676_DVB4A:
+	case LTC3676_DVB4B:
+	case LTC3676_MSKIRQ:
+	case LTC3676_MSKPG:
+	case LTC3676_USER:
+	case LTC3676_HRST:
+	case LTC3676_CLIRQ:
+		return true;
+	}
+	return false;
+}
+
+static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTC3676_IRQSTAT:
+	case LTC3676_PGSTATL:
+	case LTC3676_PGSTATRT:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config ltc3676_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.writeable_reg = ltc3676_writeable_reg,
+	.readable_reg = ltc3676_readable_reg,
+	.volatile_reg = ltc3676_volatile_reg,
+	.max_register = LTC3676_CLIRQ,
+	.use_single_rw = true,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static irqreturn_t ltc3676_isr(int irq, void *dev_id)
+{
+	struct ltc3676 *ltc3676 = dev_id;
+	struct device *dev = ltc3676->dev;
+	unsigned int i, irqstat, event;
+
+	regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat);
+
+	dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
+	if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
+		dev_warn(dev, "Over-temperature Warning\n");
+		event = REGULATOR_EVENT_OVER_TEMP;
+		for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
+			regulator_notifier_call_chain(ltc3676->regulators[i],
+						      event, NULL);
+	}
+
+	if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) {
+		dev_info(dev, "Undervoltage Warning\n");
+		event = REGULATOR_EVENT_UNDER_VOLTAGE;
+		for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
+			regulator_notifier_call_chain(ltc3676->regulators[i],
+						      event, NULL);
+	}
+
+	/* Clear warning condition */
+	regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int ltc3676_regulator_probe(struct i2c_client *client,
+				    const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct regulator_init_data *init_data = dev_get_platdata(dev);
+	struct regulator_desc *descs;
+	struct ltc3676 *ltc3676;
+	int i, ret;
+
+	ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
+	if (!ltc3676)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, ltc3676);
+	ltc3676->dev = dev;
+
+	descs = ltc3676->regulator_descs;
+	memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
+	descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
+
+	ltc3676->regmap = devm_regmap_init_i2c(client, &ltc3676_regmap_config);
+	if (IS_ERR(ltc3676->regmap)) {
+		ret = PTR_ERR(ltc3676->regmap);
+		dev_err(dev, "failed to initialize regmap: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
+		struct regulator_desc *desc = &ltc3676->regulator_descs[i];
+		struct regulator_config config = { };
+
+		if (init_data)
+			config.init_data = &init_data[i];
+
+		config.dev = dev;
+		config.driver_data = ltc3676;
+
+		ltc3676->regulators[i] = devm_regulator_register(dev, desc,
+								 &config);
+		if (IS_ERR(ltc3676->regulators[i])) {
+			ret = PTR_ERR(ltc3676->regulators[i]);
+			dev_err(dev, "failed to register regulator %s: %d\n",
+				desc->name, ret);
+			return ret;
+		}
+	}
+
+	regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
+	if (client->irq) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						ltc3676_isr,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						client->name, ltc3676);
+		if (ret) {
+			dev_err(dev, "Failed to request IRQ: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id ltc3676_i2c_id[] = {
+	{ "ltc3676" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id);
+
+static struct i2c_driver ltc3676_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+	},
+	.probe = ltc3676_regulator_probe,
+	.id_table = ltc3676_i2c_id,
+};
+module_i2c_driver(ltc3676_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
+MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index 81950bdb1cc4..954a20eeb26f 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/regulator/driver.h>
@@ -26,7 +27,7 @@
 #include <linux/regulator/of_regulator.h>
 #include "pv88080-regulator.h"
 
-#define PV88080_MAX_REGULATORS	3
+#define PV88080_MAX_REGULATORS	4
 
 /* PV88080 REGULATOR IDs */
 enum {
@@ -34,6 +35,12 @@ enum {
 	PV88080_ID_BUCK1,
 	PV88080_ID_BUCK2,
 	PV88080_ID_BUCK3,
+	PV88080_ID_HVBUCK,
+};
+
+enum pv88080_types {
+	TYPE_PV88080_AA,
+	TYPE_PV88080_BA,
 };
 
 struct pv88080_regulator {
@@ -42,7 +49,8 @@ struct pv88080_regulator {
 	unsigned int n_current_limits;
 	const int *current_limits;
 	unsigned int limit_mask;
-	unsigned int conf;
+	unsigned int mode_reg;
+	unsigned int limit_reg;
 	unsigned int conf2;
 	unsigned int conf5;
 };
@@ -51,6 +59,8 @@ struct pv88080 {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regulator_dev *rdev[PV88080_MAX_REGULATORS];
+	unsigned long type;
+	const struct pv88080_compatible_regmap *regmap_config;
 };
 
 struct pv88080_buck_voltage {
@@ -59,6 +69,30 @@ struct pv88080_buck_voltage {
 	int uV_step;
 };
 
+struct pv88080_buck_regmap {
+	/* REGS */
+	int buck_enable_reg;
+	int buck_vsel_reg;
+	int buck_mode_reg;
+	int buck_limit_reg;
+	int buck_vdac_range_reg;
+	int buck_vrange_gain_reg;
+	/* MASKS */
+	int buck_enable_mask;
+	int buck_vsel_mask;
+	int buck_limit_mask;
+};
+
+struct pv88080_compatible_regmap {
+	/* BUCK1, 2, 3 */
+	struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1];
+	/* HVBUCK */
+	int hvbuck_enable_reg;
+	int hvbuck_vsel_reg;
+	int hvbuck_enable_mask;
+	int hvbuck_vsel_mask;
+};
+
 static const struct regmap_config pv88080_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -89,13 +123,111 @@ static const struct pv88080_buck_voltage pv88080_buck_vol[2] = {
 	},
 };
 
+static const struct pv88080_compatible_regmap pv88080_aa_regs = {
+	/* BUCK1 */
+	.buck_regmap[0] = {
+		.buck_enable_reg      = PV88080AA_REG_BUCK1_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK1_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK1_CONF1,
+		.buck_limit_reg       = PV88080AA_REG_BUCK1_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK1_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5,
+		.buck_enable_mask     = PV88080_BUCK1_EN,
+		.buck_vsel_mask       = PV88080_VBUCK1_MASK,
+		.buck_limit_mask      = PV88080_BUCK1_ILIM_MASK,
+	},
+	/* BUCK2 */
+	.buck_regmap[1] = {
+		.buck_enable_reg      = PV88080AA_REG_BUCK2_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK2_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK2_CONF1,
+		.buck_limit_reg	      = PV88080AA_REG_BUCK2_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK2_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK2_EN,
+		.buck_vsel_mask       = PV88080_VBUCK2_MASK,
+		.buck_limit_mask      = PV88080_BUCK2_ILIM_MASK,
+	},
+	/* BUCK3 */
+	.buck_regmap[2] = {
+		.buck_enable_reg	  = PV88080AA_REG_BUCK3_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK3_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK3_CONF1,
+		.buck_limit_reg	      = PV88080AA_REG_BUCK3_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK3_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK3_EN,
+		.buck_vsel_mask       = PV88080_VBUCK3_MASK,
+		.buck_limit_mask      = PV88080_BUCK3_ILIM_MASK,
+	},
+	/* HVBUCK */
+	.hvbuck_enable_reg	      = PV88080AA_REG_HVBUCK_CONF2,
+	.hvbuck_vsel_reg          = PV88080AA_REG_HVBUCK_CONF1,
+	.hvbuck_enable_mask       = PV88080_HVBUCK_EN,
+	.hvbuck_vsel_mask         = PV88080_VHVBUCK_MASK,
+};
+
+static const struct pv88080_compatible_regmap pv88080_ba_regs = {
+	/* BUCK1 */
+	.buck_regmap[0] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK1_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK1_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK1_CONF1,
+		.buck_limit_reg       = PV88080BA_REG_BUCK1_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK1_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5,
+		.buck_enable_mask     = PV88080_BUCK1_EN,
+		.buck_vsel_mask       = PV88080_VBUCK1_MASK,
+		.buck_limit_mask	  = PV88080_BUCK1_ILIM_MASK,
+	},
+	/* BUCK2 */
+	.buck_regmap[1] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK2_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK2_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK2_CONF1,
+		.buck_limit_reg	      = PV88080BA_REG_BUCK2_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK2_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK2_EN,
+		.buck_vsel_mask       = PV88080_VBUCK2_MASK,
+		.buck_limit_mask	  = PV88080_BUCK2_ILIM_MASK,
+	},
+	/* BUCK3 */
+	.buck_regmap[2] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK3_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK3_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK3_CONF1,
+		.buck_limit_reg	      = PV88080BA_REG_BUCK3_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK3_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK3_EN,
+		.buck_vsel_mask       = PV88080_VBUCK3_MASK,
+		.buck_limit_mask	  = PV88080_BUCK3_ILIM_MASK,
+	},
+	/* HVBUCK */
+	.hvbuck_enable_reg	      = PV88080BA_REG_HVBUCK_CONF2,
+	.hvbuck_vsel_reg          = PV88080BA_REG_HVBUCK_CONF1,
+	.hvbuck_enable_mask       = PV88080_HVBUCK_EN,
+	.hvbuck_vsel_mask		  = PV88080_VHVBUCK_MASK,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88080_dt_ids[] = {
+	{ .compatible = "pvs,pv88080",    .data = (void *)TYPE_PV88080_AA },
+	{ .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA },
+	{ .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
+#endif
+
 static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
 {
 	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
 	unsigned int data;
 	int ret, mode = 0;
 
-	ret = regmap_read(rdev->regmap, info->conf, &data);
+	ret = regmap_read(rdev->regmap, info->mode_reg, &data);
 	if (ret < 0)
 		return ret;
 
@@ -136,7 +268,7 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(rdev->regmap, info->conf,
+	return regmap_update_bits(rdev->regmap, info->mode_reg,
 					PV88080_BUCK1_MODE_MASK, val);
 }
 
@@ -151,7 +283,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 				return regmap_update_bits(rdev->regmap,
-					info->conf,
+					info->limit_reg,
 					info->limit_mask,
 					i << PV88080_BUCK1_ILIM_SHIFT);
 		}
@@ -166,7 +298,7 @@ static int pv88080_get_current_limit(struct regulator_dev *rdev)
 	unsigned int data;
 	int ret;
 
-	ret = regmap_read(rdev->regmap, info->conf, &data);
+	ret = regmap_read(rdev->regmap, info->limit_reg, &data);
 	if (ret < 0)
 		return ret;
 
@@ -187,6 +319,15 @@ static struct regulator_ops pv88080_buck_ops = {
 	.get_current_limit = pv88080_get_current_limit,
 };
 
+static struct regulator_ops pv88080_hvbuck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
 #define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \
 {\
 	.desc	=	{\
@@ -200,17 +341,25 @@ static struct regulator_ops pv88080_buck_ops = {
 		.min_uV = min, \
 		.uV_step = step, \
 		.n_voltages = ((max) - (min))/(step) + 1, \
-		.enable_reg = PV88080_REG_##regl_name##_CONF0, \
-		.enable_mask = PV88080_##regl_name##_EN, \
-		.vsel_reg = PV88080_REG_##regl_name##_CONF0, \
-		.vsel_mask = PV88080_V##regl_name##_MASK, \
 	},\
 	.current_limits = limits_array, \
 	.n_current_limits = ARRAY_SIZE(limits_array), \
-	.limit_mask = PV88080_##regl_name##_ILIM_MASK, \
-	.conf = PV88080_REG_##regl_name##_CONF1, \
-	.conf2 = PV88080_REG_##regl_name##_CONF2, \
-	.conf5 = PV88080_REG_##regl_name##_CONF5, \
+}
+
+#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88080_hvbuck_ops,\
+		.min_uV = min, \
+		.uV_step = step, \
+		.n_voltages = ((max) - (min))/(step) + 1, \
+	},\
 }
 
 static struct pv88080_regulator pv88080_regulator_info[] = {
@@ -220,6 +369,7 @@ static struct pv88080_regulator pv88080_regulator_info[] = {
 		pv88080_buck23_limits),
 	PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
 		pv88080_buck23_limits),
+	PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000),
 };
 
 static irqreturn_t pv88080_irq_handler(int irq, void *data)
@@ -280,6 +430,8 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 {
 	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
 	struct pv88080 *chip;
+	const struct pv88080_compatible_regmap *regmap_config;
+	const struct of_device_id *match;
 	struct regulator_config config = { };
 	int i, error, ret;
 	unsigned int conf2, conf5;
@@ -297,6 +449,17 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 		return error;
 	}
 
+	if (i2c->dev.of_node) {
+		match = of_match_node(pv88080_dt_ids, i2c->dev.of_node);
+		if (!match) {
+			dev_err(chip->dev, "Failed to get of_match_node\n");
+			return -EINVAL;
+		}
+		chip->type = (unsigned long)match->data;
+	} else {
+		chip->type = id->driver_data;
+	}
+
 	i2c_set_clientdata(i2c, chip);
 
 	if (i2c->irq != 0) {
@@ -336,31 +499,58 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 				"Failed to update mask reg: %d\n", ret);
 			return ret;
 		}
-
 	} else {
 		dev_warn(chip->dev, "No IRQ configured\n");
 	}
 
+	switch (chip->type) {
+	case TYPE_PV88080_AA:
+		chip->regmap_config = &pv88080_aa_regs;
+		break;
+	case TYPE_PV88080_BA:
+		chip->regmap_config = &pv88080_ba_regs;
+		break;
+	}
+
+	regmap_config = chip->regmap_config;
 	config.dev = chip->dev;
 	config.regmap = chip->regmap;
 
-	for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+	/* Registeration for BUCK1, 2, 3 */
+	for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) {
 		if (init_data)
 			config.init_data = &init_data[i];
 
+		pv88080_regulator_info[i].limit_reg
+			= regmap_config->buck_regmap[i].buck_limit_reg;
+		pv88080_regulator_info[i].limit_mask
+			= regmap_config->buck_regmap[i].buck_limit_mask;
+		pv88080_regulator_info[i].mode_reg
+			= regmap_config->buck_regmap[i].buck_mode_reg;
+		pv88080_regulator_info[i].conf2
+			= regmap_config->buck_regmap[i].buck_vdac_range_reg;
+		pv88080_regulator_info[i].conf5
+			= regmap_config->buck_regmap[i].buck_vrange_gain_reg;
+		pv88080_regulator_info[i].desc.enable_reg
+			= regmap_config->buck_regmap[i].buck_enable_reg;
+		pv88080_regulator_info[i].desc.enable_mask
+			= regmap_config->buck_regmap[i].buck_enable_mask;
+		pv88080_regulator_info[i].desc.vsel_reg
+			= regmap_config->buck_regmap[i].buck_vsel_reg;
+		pv88080_regulator_info[i].desc.vsel_mask
+			= regmap_config->buck_regmap[i].buck_vsel_mask;
+
 		ret = regmap_read(chip->regmap,
-			pv88080_regulator_info[i].conf2, &conf2);
+				pv88080_regulator_info[i].conf2, &conf2);
 		if (ret < 0)
 			return ret;
-
 		conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) &
 			PV88080_BUCK_VDAC_RANGE_MASK);
 
 		ret = regmap_read(chip->regmap,
-			pv88080_regulator_info[i].conf5, &conf5);
+				pv88080_regulator_info[i].conf5, &conf5);
 		if (ret < 0)
 			return ret;
-
 		conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) &
 			PV88080_BUCK_VRANGE_GAIN_MASK);
 
@@ -383,23 +573,38 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 		}
 	}
 
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg
+		= regmap_config->hvbuck_enable_reg;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask
+		= regmap_config->hvbuck_enable_mask;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg
+		= regmap_config->hvbuck_vsel_reg;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask
+		= regmap_config->hvbuck_vsel_mask;
+
+	/* Registeration for HVBUCK */
+	if (init_data)
+		config.init_data = &init_data[PV88080_ID_HVBUCK];
+
+	config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK];
+	chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev,
+		&pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config);
+	if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) {
+		dev_err(chip->dev, "Failed to register PV88080 regulator\n");
+		return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]);
+	}
+
 	return 0;
 }
 
 static const struct i2c_device_id pv88080_i2c_id[] = {
-	{"pv88080", 0},
+	{ "pv88080",    TYPE_PV88080_AA },
+	{ "pv88080-aa", TYPE_PV88080_AA },
+	{ "pv88080-ba", TYPE_PV88080_BA },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);
 
-#ifdef CONFIG_OF
-static const struct of_device_id pv88080_dt_ids[] = {
-	{ .compatible = "pvs,pv88080", .data = &pv88080_i2c_id[0] },
-	{},
-};
-MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
-#endif
-
 static struct i2c_driver pv88080_regulator_driver = {
 	.driver = {
 		.name = "pv88080",
diff --git a/drivers/regulator/pv88080-regulator.h b/drivers/regulator/pv88080-regulator.h
index 5e9afde606f4..ae25ff360e3d 100644
--- a/drivers/regulator/pv88080-regulator.h
+++ b/drivers/regulator/pv88080-regulator.h
@@ -17,55 +17,75 @@
 #define __PV88080_REGISTERS_H__
 
 /* System Control and Event Registers */
-#define	PV88080_REG_EVENT_A			0x04
-#define	PV88080_REG_MASK_A			0x09
-#define	PV88080_REG_MASK_B			0x0a
-#define	PV88080_REG_MASK_C			0x0b
+#define	PV88080_REG_EVENT_A				0x04
+#define	PV88080_REG_MASK_A				0x09
+#define	PV88080_REG_MASK_B				0x0A
+#define	PV88080_REG_MASK_C				0x0B
 
-/* Regulator Registers */
-#define	PV88080_REG_BUCK1_CONF0			0x27
-#define	PV88080_REG_BUCK1_CONF1			0x28
-#define	PV88080_REG_BUCK1_CONF2			0x59
-#define	PV88080_REG_BUCK1_CONF5			0x5c
-#define	PV88080_REG_BUCK2_CONF0			0x29
-#define	PV88080_REG_BUCK2_CONF1			0x2a
-#define	PV88080_REG_BUCK2_CONF2			0x61
-#define	PV88080_REG_BUCK2_CONF5			0x64
-#define	PV88080_REG_BUCK3_CONF0			0x2b
-#define	PV88080_REG_BUCK3_CONF1			0x2c
-#define	PV88080_REG_BUCK3_CONF2			0x69
-#define	PV88080_REG_BUCK3_CONF5			0x6c
+/* Regulator Registers - rev. AA */
+#define PV88080AA_REG_HVBUCK_CONF1		0x2D
+#define PV88080AA_REG_HVBUCK_CONF2		0x2E
+#define	PV88080AA_REG_BUCK1_CONF0		0x27
+#define	PV88080AA_REG_BUCK1_CONF1		0x28
+#define	PV88080AA_REG_BUCK1_CONF2		0x59
+#define	PV88080AA_REG_BUCK1_CONF5		0x5C
+#define	PV88080AA_REG_BUCK2_CONF0		0x29
+#define	PV88080AA_REG_BUCK2_CONF1		0x2A
+#define	PV88080AA_REG_BUCK2_CONF2		0x61
+#define	PV88080AA_REG_BUCK2_CONF5		0x64
+#define	PV88080AA_REG_BUCK3_CONF0		0x2B
+#define	PV88080AA_REG_BUCK3_CONF1		0x2C
+#define	PV88080AA_REG_BUCK3_CONF2		0x69
+#define	PV88080AA_REG_BUCK3_CONF5		0x6C
+
+/* Regulator Registers - rev. BA */
+#define	PV88080BA_REG_HVBUCK_CONF1		0x33
+#define	PV88080BA_REG_HVBUCK_CONF2		0x34
+#define	PV88080BA_REG_BUCK1_CONF0		0x2A
+#define	PV88080BA_REG_BUCK1_CONF1		0x2C
+#define	PV88080BA_REG_BUCK1_CONF2		0x5A
+#define	PV88080BA_REG_BUCK1_CONF5		0x5D
+#define	PV88080BA_REG_BUCK2_CONF0		0x2D
+#define	PV88080BA_REG_BUCK2_CONF1		0x2F
+#define	PV88080BA_REG_BUCK2_CONF2		0x63
+#define	PV88080BA_REG_BUCK2_CONF5		0x66
+#define	PV88080BA_REG_BUCK3_CONF0		0x30
+#define	PV88080BA_REG_BUCK3_CONF1		0x32
+#define	PV88080BA_REG_BUCK3_CONF2		0x6C
+#define	PV88080BA_REG_BUCK3_CONF5		0x6F
 
 /* PV88080_REG_EVENT_A (addr=0x04) */
 #define	PV88080_E_VDD_FLT				0x01
-#define	PV88080_E_OVER_TEMP			0x02
+#define	PV88080_E_OVER_TEMP				0x02
 
 /* PV88080_REG_MASK_A (addr=0x09) */
 #define	PV88080_M_VDD_FLT				0x01
-#define	PV88080_M_OVER_TEMP			0x02
+#define	PV88080_M_OVER_TEMP				0x02
 
-/* PV88080_REG_BUCK1_CONF0 (addr=0x27) */
+/* PV88080_REG_BUCK1_CONF0 (addr=0x27|0x2A) */
 #define	PV88080_BUCK1_EN				0x80
-#define PV88080_VBUCK1_MASK			0x7F
-/* PV88080_REG_BUCK2_CONF0 (addr=0x29) */
-#define	PV88080_BUCK2_EN				0x80
-#define PV88080_VBUCK2_MASK			0x7F
-/* PV88080_REG_BUCK3_CONF0 (addr=0x2b) */
-#define	PV88080_BUCK3_EN				0x80
-#define PV88080_VBUCK3_MASK			0x7F
+#define PV88080_VBUCK1_MASK				0x7F
 
-/* PV88080_REG_BUCK1_CONF1 (addr=0x28) */
-#define PV88080_BUCK1_ILIM_SHIFT			2
+/* PV88080_REG_BUCK2_CONF0 (addr=0x29|0x2D) */
+#define	PV88080_BUCK2_EN				0x80
+#define PV88080_VBUCK2_MASK				0x7F
+
+/* PV88080_REG_BUCK3_CONF0 (addr=0x2B|0x30) */
+#define	PV88080_BUCK3_EN				0x80
+#define PV88080_VBUCK3_MASK				0x7F
+
+/* PV88080_REG_BUCK1_CONF1 (addr=0x28|0x2C) */
+#define PV88080_BUCK1_ILIM_SHIFT		2
 #define PV88080_BUCK1_ILIM_MASK			0x0C
 #define PV88080_BUCK1_MODE_MASK			0x03
 
-/* PV88080_REG_BUCK2_CONF1 (addr=0x2a) */
-#define PV88080_BUCK2_ILIM_SHIFT			2
+/* PV88080_REG_BUCK2_CONF1 (addr=0x2A|0x2F) */
+#define PV88080_BUCK2_ILIM_SHIFT		2
 #define PV88080_BUCK2_ILIM_MASK			0x0C
 #define PV88080_BUCK2_MODE_MASK			0x03
 
-/* PV88080_REG_BUCK3_CONF1 (addr=0x2c) */
-#define PV88080_BUCK3_ILIM_SHIFT			2
+/* PV88080_REG_BUCK3_CONF1 (addr=0x2C|0x32) */
+#define PV88080_BUCK3_ILIM_SHIFT		2
 #define PV88080_BUCK3_ILIM_MASK			0x0C
 #define PV88080_BUCK3_MODE_MASK			0x03
 
@@ -73,20 +93,26 @@
 #define	PV88080_BUCK_MODE_AUTO			0x01
 #define	PV88080_BUCK_MODE_SYNC			0x02
 
-/* PV88080_REG_BUCK2_CONF2 (addr=0x61) */
-/* PV88080_REG_BUCK3_CONF2 (addr=0x69) */
-#define PV88080_BUCK_VDAC_RANGE_SHIFT			7
-#define PV88080_BUCK_VDAC_RANGE_MASK			0x01
+/* PV88080_REG_HVBUCK_CONF1 (addr=0x2D|0x33) */
+#define PV88080_VHVBUCK_MASK			0xFF
 
-#define PV88080_BUCK_VDAC_RANGE_1			0x00
-#define PV88080_BUCK_VDAC_RANGE_2			0x01
+/* PV88080_REG_HVBUCK_CONF1 (addr=0x2E|0x34) */
+#define PV88080_HVBUCK_EN				0x01
 
-/* PV88080_REG_BUCK2_CONF5 (addr=0x64) */
-/* PV88080_REG_BUCK3_CONF5 (addr=0x6c) */
-#define PV88080_BUCK_VRANGE_GAIN_SHIFT			0
-#define PV88080_BUCK_VRANGE_GAIN_MASK			0x01
+/* PV88080_REG_BUCK2_CONF2 (addr=0x61|0x63) */
+/* PV88080_REG_BUCK3_CONF2 (addr=0x69|0x6C) */
+#define PV88080_BUCK_VDAC_RANGE_SHIFT	7
+#define PV88080_BUCK_VDAC_RANGE_MASK	0x01
 
-#define PV88080_BUCK_VRANGE_GAIN_1			0x00
-#define PV88080_BUCK_VRANGE_GAIN_2			0x01
+#define PV88080_BUCK_VDAC_RANGE_1		0x00
+#define PV88080_BUCK_VDAC_RANGE_2		0x01
+
+/* PV88080_REG_BUCK2_CONF5 (addr=0x64|0x66) */
+/* PV88080_REG_BUCK3_CONF5 (addr=0x6C|0x6F) */
+#define PV88080_BUCK_VRANGE_GAIN_SHIFT	0
+#define PV88080_BUCK_VRANGE_GAIN_MASK	0x01
+
+#define PV88080_BUCK_VRANGE_GAIN_1		0x00
+#define PV88080_BUCK_VRANGE_GAIN_2		0x01
 
 #endif	/* __PV88080_REGISTERS_H__ */
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index c24524242da2..1b88e0e15a70 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -194,12 +193,10 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
 	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
 	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
-	unsigned int ramp_delay = rdev->constraints->ramp_delay;
 	int min_uV = rdev->constraints->min_uV;
 	int max_uV = rdev->constraints->max_uV;
 	int diff_uV = max_uV - min_uV;
 	struct pwm_state pstate;
-	int old_uV = pwm_regulator_get_voltage(rdev);
 	unsigned int diff_duty;
 	unsigned int dutycycle;
 	int ret;
@@ -233,13 +230,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 		return ret;
 	}
 
-	if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
-		return 0;
-
-	/* Ramp delay is in uV/uS. Adjust to uS and delay */
-	ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
-	usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
-
 	return 0;
 }
 
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 40d07ba036e7..a6767494d39b 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -533,8 +533,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 static struct platform_driver rk808_regulator_driver = {
 	.probe = rk808_regulator_probe,
 	.driver = {
-		.name = "rk808-regulator",
-		.owner = THIS_MODULE,
+		.name = "rk808-regulator"
 	},
 };
 
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index d1e631d64a20..eb0f5b13841a 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -180,6 +180,14 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
 	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
 		return -EINVAL;
 
+	/*
+	 * Certain revisions of TPS65218 will need to have DCDC3 regulator
+	 * enabled always, otherwise an immediate system reboot will occur
+	 * during poweroff.
+	 */
+	if (rid == TPS65218_DCDC_3 && tps->rev == TPS65218_REV_2_1)
+		return 0;
+
 	if (!tps->info[rid]->strobe) {
 		if (rid == TPS65218_DCDC_3)
 			tps->info[rid]->strobe = 3;
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index fb991ec76423..696116ebdf50 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1111,6 +1111,12 @@ static int tps65910_probe(struct platform_device *pdev)
 		pmic->num_regulators = ARRAY_SIZE(tps65910_regs);
 		pmic->ext_sleep_control = tps65910_ext_sleep_control;
 		info = tps65910_regs;
+		/* Work around silicon erratum SWCZ010: output programmed
+		 * voltage level can go higher than expected or crash
+		 * Workaround: use no synchronization of DCDC clocks
+		 */
+		tps65910_reg_clear_bits(pmic->mfd, TPS65910_DCDCCTRL,
+					DCDCCTRL_DCDCCKSYNC_MASK);
 		break;
 	case TPS65911:
 		pmic->get_ctrl_reg = &tps65911_get_ctrl_register;
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index 7fdf5326f34e..d1db9527fab5 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -63,6 +63,11 @@
 #define TPS65218_CHIPID_CHIP_MASK	0xF8
 #define TPS65218_CHIPID_REV_MASK	0x07
 
+#define TPS65218_REV_1_0		0x0
+#define TPS65218_REV_1_1		0x1
+#define TPS65218_REV_2_0		0x2
+#define TPS65218_REV_2_1		0x3
+
 #define TPS65218_INT1_VPRG		BIT(5)
 #define TPS65218_INT1_AC		BIT(4)
 #define TPS65218_INT1_PB		BIT(3)
@@ -267,6 +272,7 @@ struct tps_info {
 struct tps65218 {
 	struct device *dev;
 	unsigned int id;
+	u8 rev;
 
 	struct mutex tps_lock;		/* lock guarding the data structure */
 	/* IRQ Data */
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index cae500b2c1d7..692108222271 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -140,8 +140,6 @@ struct regulator;
  *
  * @supply:   The name of the supply.  Initialised by the user before
  *            using the bulk regulator APIs.
- * @optional: The supply should be considered optional. Initialised by the user
- *            before using the bulk regulator APIs.
  * @consumer: The regulator consumer for the supply.  This will be managed
  *            by the bulk API.
  *
@@ -151,7 +149,6 @@ struct regulator;
  */
 struct regulator_bulk_data {
 	const char *supply;
-	bool optional;
 	struct regulator *consumer;
 
 	/* private: Internal use */
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fcfa40a6692c..37b532410528 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -113,10 +113,14 @@ struct regulator_linear_range {
  *               stabilise after being enabled, in microseconds.
  * @set_ramp_delay: Set the ramp delay for the regulator. The driver should
  *		select ramp delay equal to or less than(closest) ramp_delay.
+ * @set_voltage_time: Time taken for the regulator voltage output voltage
+ *               to stabilise after being set to a new value, in microseconds.
+ *               The function receives the from and to voltage as input, it
+ *               should return the worst case.
  * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
  *               to stabilise after being set to a new value, in microseconds.
- *               The function provides the from and to voltage selector, the
- *               function should return the worst case.
+ *               The function receives the from and to voltage selector as
+ *               input, it should return the worst case.
  * @set_soft_start: Enable soft start for the regulator.
  *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
@@ -168,6 +172,8 @@ struct regulator_ops {
 	/* Time taken to enable or set voltage on the regulator */
 	int (*enable_time) (struct regulator_dev *);
 	int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
+	int (*set_voltage_time) (struct regulator_dev *, int old_uV,
+				 int new_uV);
 	int (*set_voltage_time_sel) (struct regulator_dev *,
 				     unsigned int old_selector,
 				     unsigned int new_selector);