diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index f5561ac7e17e..936ab5b87324 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -42,9 +42,6 @@ Optional properties: - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD - line respectively. It will use specified GPIO instead of the peripheral - function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -66,19 +63,3 @@ Example: interrupts = <10>; reg-shift = <2>; }; - -Example for OMAP UART using GPIO-based modem control signals: - - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; - dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 122e0e4029fe..1a16feac9a36 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -15,8 +15,6 @@ #include #include -#include "../serial_mctrl_gpio.h" - struct uart_8250_dma { int (*tx_dma)(struct uart_8250_port *p); int (*rx_dma)(struct uart_8250_port *p); @@ -133,43 +131,12 @@ void serial8250_em485_destroy(struct uart_8250_port *p); static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) { - int mctrl_gpio = 0; - serial_out(up, UART_MCR, value); - - if (value & UART_MCR_RTS) - mctrl_gpio |= TIOCM_RTS; - if (value & UART_MCR_DTR) - mctrl_gpio |= TIOCM_DTR; - - mctrl_gpio_set(up->gpios, mctrl_gpio); } static inline int serial8250_in_MCR(struct uart_8250_port *up) { - int mctrl, mctrl_gpio = 0; - - mctrl = serial_in(up, UART_MCR); - - /* save current MCR values */ - if (mctrl & UART_MCR_RTS) - mctrl_gpio |= TIOCM_RTS; - if (mctrl & UART_MCR_DTR) - mctrl_gpio |= TIOCM_DTR; - - mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio); - - if (mctrl_gpio & TIOCM_RTS) - mctrl |= UART_MCR_RTS; - else - mctrl &= ~UART_MCR_RTS; - - if (mctrl_gpio & TIOCM_DTR) - mctrl |= UART_MCR_DTR; - else - mctrl &= ~UART_MCR_DTR; - - return mctrl; + return serial_in(up, UART_MCR); } #if defined(__alpha__) && !defined(CONFIG_PCI) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 13ad5c3d2e68..dcf43f66404f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -974,8 +974,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart = serial8250_find_match_or_unused(&up->port); if (uart && uart->port.type != PORT_8250_CIR) { - struct mctrl_gpios *gpios; - if (uart->port.dev) uart_remove_one_port(&serial8250_reg, &uart->port); @@ -1013,13 +1011,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->port.flags & UPF_FIXED_TYPE) uart->port.type = up->port.type; - gpios = mctrl_gpio_init(&uart->port, 0); - if (IS_ERR(gpios)) { - if (PTR_ERR(gpios) != -ENOSYS) - return PTR_ERR(gpios); - } else - uart->gpios = gpios; - serial8250_set_defaults(uart); /* Possibly override default I/O functions. */ diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index e14982f36a04..61ad6c3b20a0 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -134,21 +134,18 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial8250_do_set_mctrl(port, mctrl); - if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, - UART_GPIO_RTS))) { - /* - * Turn off autoRTS if RTS is lowered and restore autoRTS - * setting if RTS is raised - */ - lcr = serial_in(up, UART_LCR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) - priv->efr |= UART_EFR_RTS; - else - priv->efr &= ~UART_EFR_RTS; - serial_out(up, UART_EFR, priv->efr); - serial_out(up, UART_LCR, lcr); - } + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS setting + * if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; + else + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_LCR, lcr); } /* @@ -449,9 +446,7 @@ static void omap_8250_set_termios(struct uart_port *port, priv->efr = 0; up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW - && IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, - UART_GPIO_RTS))) { + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7481b95c6d84..bdfa659b9606 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1618,8 +1618,6 @@ static void serial8250_disable_ms(struct uart_port *port) if (up->bugs & UART_BUG_NOMSR) return; - mctrl_gpio_disable_ms(up->gpios); - up->ier &= ~UART_IER_MSI; serial_port_out(port, UART_IER, up->ier); } @@ -1632,8 +1630,6 @@ static void serial8250_enable_ms(struct uart_port *port) if (up->bugs & UART_BUG_NOMSR) return; - mctrl_gpio_enable_ms(up->gpios); - up->ier |= UART_IER_MSI; serial8250_rpm_get(up); @@ -1917,8 +1913,7 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port) ret |= TIOCM_DSR; if (status & UART_MSR_CTS) ret |= TIOCM_CTS; - - return mctrl_gpio_get(up->gpios, &ret); + return ret; } EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index c9ec839a5ddf..7c6f7afca5dd 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -6,7 +6,6 @@ config SERIAL_8250 tristate "8250/16550 and compatible serial support" select SERIAL_CORE - select SERIAL_MCTRL_GPIO if GPIOLIB ---help--- This selects whether you want to include the driver for the standard serial ports. The standard answer is Y. People who might say N diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 923266cd294a..48ec7651989b 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -111,7 +111,6 @@ struct uart_8250_port { * if no_console_suspend */ unsigned char probe; - struct mctrl_gpios *gpios; #define UART_PROBE_RSA (1 << 0) /*