ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts

The display, that incorporates this touchpanel is obsolete and won't
be supported any more.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Lothar Waßmann 2017-10-17 11:17:53 +02:00 committed by Shawn Guo
parent f3dd26c091
commit 65a2f7822d
4 changed files with 3 additions and 85 deletions

View File

@ -1,5 +1,5 @@
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -98,19 +98,6 @@ backlight1: backlight1 {
};
};
&i2c3 {
polytouch2: eeti@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
@ -168,11 +155,3 @@ lvds_timing1: hsd100pxn1 {
&pwm1 {
status = "okay";
};
&iomuxc {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};

View File

@ -1,5 +1,5 @@
/*
* Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -106,18 +106,6 @@ &can2 {
xceiver-supply = <&reg_3v3>;
};
&i2c3 {
polytouch1: eeti@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&kpp {
status = "disabled"; /* pads partially clash with backlight1 PWM */
};
@ -245,11 +233,3 @@ lvds1_timing2: nl12880bc20 {
&pwm1 {
status = "okay";
};
&iomuxc {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};

View File

@ -98,19 +98,6 @@ backlight1: backlight1 {
};
};
&i2c3 {
polytouch1: eeti@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
@ -172,11 +159,3 @@ &pwm1 {
&sata {
status = "okay";
};
&iomuxc {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};

View File

@ -1,5 +1,5 @@
/*
* Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -107,18 +107,6 @@ &can2 {
xceiver-supply = <&reg_3v3>;
};
&i2c3 {
polytouch1: eeti@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&ipu2 {
status = "disabled";
};
@ -254,11 +242,3 @@ &pwm1 {
&sata {
status = "okay";
};
&iomuxc {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};