Some more devicetree changes, including usbphy support for the
Cortex-A9 SoCs and actually enabling usb on the rk3066-marsboard, Two more veyron-devices - namely Speedy and Minnie and a fix for the tsadc. One slightly more interesting fix is the blocking of the last 16MB of memory on 4GB rk3288 devices. The rk3288 cannot use this area for dma operations, so things like the mmc or usb controllers regularly fail when trying to read data. This solution mimicks the solution from the ChromeOS kernel, who also do not seem to have found a better solution yet. Here it only moves to the devicetree. As this issue is also present on the arm64 rk3368, any future better solution to this problem would need to describe this in the devicetree as well and could then remove this block. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCAAGBQJVxnMhAAoJEPOmecmc0R2BGXAH/03qzTWzHaLJH73zNj2+r7cm GwlwxntSDb4e6lq5hKT1+biqBrin+IrzA1sCcyeiFlg3wOWP5AuuEyiKgVKHZ//c 9dKAVsmtX5TMliFPA+U6SvEyURPk5RSU30cTgYEEBVhwWhDduDnJOBmOpLhHyQUC 36FMlfNBpNQQHYQUNziXEgnWZNtvdiYnmt4FPkdQWT08kZKJvyky+gbqOkya4RzH Pi70IzQyh3F0UiQR4f34q+C0+KStF9LdZSeYgnnY++Sg+5Wz9FAWcdoo2qwi2C8t qVPEF2B1vW87+9z3WtGRk2CE48uy6QS7WQL3l/wHp6RxMCPXu9QjOAHOl2rBHSs= =2Rte -----END PGP SIGNATURE----- Merge tag 'v4.3-rockchip32-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Some more devicetree changes, including usbphy support for the Cortex-A9 SoCs and actually enabling usb on the rk3066-marsboard, Two more veyron-devices - namely Speedy and Minnie and a fix for the tsadc. One slightly more interesting fix is the blocking of the last 16MB of memory on 4GB rk3288 devices. The rk3288 cannot use this area for dma operations, so things like the mmc or usb controllers regularly fail when trying to read data. This solution mimicks the solution from the ChromeOS kernel, who also do not seem to have found a better solution yet. Here it only moves to the devicetree. As this issue is also present on the arm64 rk3368, any future better solution to this problem would need to describe this in the devicetree as well and could then remove this block. * tag 'v4.3-rockchip32-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add veyron-minnie board ARM: dts: rockchip: reserve unusable memory region on rk3288 ARM: dts: rockchip: enable usb controller on marsboard ARM: dts: rockchip: add usb phys to Cortex-A9 socs ARM: dts: rockchip: set correct dwc2 params for cortex-a9 socs ARM: dts: rockchip: Add veyron-speedy board ARM: dts: rockchip: Use correct dts properties for tsadc node on veyron Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
6d511a26ce
|
|
@ -38,11 +38,26 @@ Rockchip platforms device tree bindings
|
|||
"google,veyron-jerry-rev3", "google,veyron-jerry",
|
||||
"google,veyron", "rockchip,rk3288";
|
||||
|
||||
- Google Minnie (Asus Chromebook Flip C100P):
|
||||
Required root node properties:
|
||||
- compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
|
||||
"google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
|
||||
"google,veyron-minnie-rev0", "google,veyron-minnie",
|
||||
"google,veyron", "rockchip,rk3288";
|
||||
|
||||
- Google Pinky (dev-board):
|
||||
Required root node properties:
|
||||
- compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
|
||||
"google,veyron", "rockchip,rk3288";
|
||||
|
||||
- Google Speedy (Asus C201 Chromebook):
|
||||
Required root node properties:
|
||||
- compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
|
||||
"google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
|
||||
"google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
|
||||
"google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
|
||||
"google,veyron-speedy", "google,veyron", "rockchip,rk3288";
|
||||
|
||||
- Rockchip R88 board:
|
||||
Required root node properties:
|
||||
- compatible = "rockchip,r88", "rockchip,rk3368";
|
||||
|
|
|
|||
|
|
@ -506,7 +506,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
rk3288-firefly.dtb \
|
||||
rk3288-r89.dtb \
|
||||
rk3288-veyron-jerry.dtb \
|
||||
rk3288-veyron-pinky.dtb
|
||||
rk3288-veyron-minnie.dtb \
|
||||
rk3288-veyron-pinky.dtb \
|
||||
rk3288-veyron-speedy.dtb
|
||||
dtb-$(CONFIG_ARCH_S3C24XX) += \
|
||||
s3c2416-smdk2416.dtb
|
||||
dtb-$(CONFIG_ARCH_S3C64XX) += \
|
||||
|
|
|
|||
|
|
@ -202,6 +202,18 @@ &uart3 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -460,6 +460,10 @@ &usb_host {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -169,6 +169,28 @@ timer@2003a000 {
|
|||
clock-names = "timer", "pclk";
|
||||
};
|
||||
|
||||
usbphy: phy {
|
||||
compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
|
||||
rockchip,grf = <&grf>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
usbphy0: usb-phy0 {
|
||||
#phy-cells = <0>;
|
||||
reg = <0x17c>;
|
||||
clocks = <&cru SCLK_OTGPHY0>;
|
||||
clock-names = "phyclk";
|
||||
};
|
||||
|
||||
usbphy1: usb-phy1 {
|
||||
#phy-cells = <0>;
|
||||
reg = <0x188>;
|
||||
clocks = <&cru SCLK_OTGPHY1>;
|
||||
clock-names = "phyclk";
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "rockchip,rk3066a-pinctrl";
|
||||
rockchip,grf = <&grf>;
|
||||
|
|
|
|||
|
|
@ -359,6 +359,10 @@ &uart3 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -130,6 +130,28 @@ cru: clock-controller@20000000 {
|
|||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
usbphy: phy {
|
||||
compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
|
||||
rockchip,grf = <&grf>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
usbphy0: usb-phy0 {
|
||||
#phy-cells = <0>;
|
||||
reg = <0x10c>;
|
||||
clocks = <&cru SCLK_OTGPHY0>;
|
||||
clock-names = "phyclk";
|
||||
};
|
||||
|
||||
usbphy1: usb-phy1 {
|
||||
#phy-cells = <0>;
|
||||
reg = <0x11c>;
|
||||
clocks = <&cru SCLK_OTGPHY1>;
|
||||
clock-names = "phyclk";
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "rockchip,rk3188-pinctrl";
|
||||
rockchip,grf = <&grf>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,226 @@
|
|||
/*
|
||||
* Google Veyron Minnie Rev 0+ board device tree source
|
||||
*
|
||||
* Copyright 2015 Google, Inc
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3288-veyron-chromebook.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Minnie";
|
||||
compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
|
||||
"google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
|
||||
"google,veyron-minnie-rev0", "google,veyron-minnie",
|
||||
"google,veyron", "rockchip,rk3288";
|
||||
|
||||
backlight_regulator: backlight-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_pwr_en>;
|
||||
regulator-name = "backlight_regulator";
|
||||
vin-supply = <&vcc33_sys>;
|
||||
startup-delay-us = <15000>;
|
||||
};
|
||||
|
||||
panel_regulator: panel-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_enable_h>;
|
||||
regulator-name = "panel_regulator";
|
||||
vin-supply = <&vcc33_sys>;
|
||||
};
|
||||
|
||||
vcc18_lcd: vcc18-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&avdd_1v8_disp_en>;
|
||||
regulator-name = "vcc18_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc18_wl>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_keys {
|
||||
pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
|
||||
|
||||
volum_down {
|
||||
label = "Volum_down";
|
||||
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
|
||||
volum_up {
|
||||
label = "Volum_up";
|
||||
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_tunnel {
|
||||
battery: bq27500@55 {
|
||||
compatible = "ti,bq27500";
|
||||
reg = <0x55>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
};
|
||||
|
||||
&rk808 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
|
||||
|
||||
regulators {
|
||||
vcc33_touch: LDO_REG2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc33_touch";
|
||||
regulator-suspend-mem-disabled;
|
||||
};
|
||||
|
||||
vcc5v_touch: SWITCH_REG2 {
|
||||
regulator-name = "vcc5v_touch";
|
||||
regulator-suspend-mem-disabled;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
&sdmmc_bus4>;
|
||||
};
|
||||
|
||||
&vcc_5v {
|
||||
enable-active-high;
|
||||
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&drv_5v>;
|
||||
};
|
||||
|
||||
&vcc50_hdmi {
|
||||
enable-active-high;
|
||||
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc50_hdmi_en>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
backlight {
|
||||
bl_pwr_en: bl_pwr_en {
|
||||
rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
buck-5v {
|
||||
drv_5v: drv-5v {
|
||||
rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
buttons {
|
||||
volum_down_l: volum-down-l {
|
||||
rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
volum_up_l: volum-up-l {
|
||||
rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi {
|
||||
vcc50_hdmi_en: vcc50-hdmi-en {
|
||||
rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd {
|
||||
lcd_enable_h: lcd-en {
|
||||
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
avdd_1v8_disp_en: avdd-1v8-disp-en {
|
||||
rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
dvs_1: dvs-1 {
|
||||
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
dvs_2: dvs-2 {
|
||||
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
prochot {
|
||||
gpio_prochot: gpio-prochot {
|
||||
rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen {
|
||||
touch_int: touch-int {
|
||||
rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
touch_rst: touch-rst {
|
||||
rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,155 @@
|
|||
/*
|
||||
* Google Veyron Speedy Rev 1+ board device tree source
|
||||
*
|
||||
* Copyright 2015 Google, Inc
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3288-veyron-chromebook.dtsi"
|
||||
#include "cros-ec-sbs.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Speedy";
|
||||
compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
|
||||
"google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
|
||||
"google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
|
||||
"google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
|
||||
"google,veyron-speedy", "google,veyron", "rockchip,rk3288";
|
||||
|
||||
panel_regulator: panel-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_enable_h>;
|
||||
regulator-name = "panel_regulator";
|
||||
vin-supply = <&vcc33_sys>;
|
||||
};
|
||||
|
||||
vcc18_lcd: vcc18-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&avdd_1v8_disp_en>;
|
||||
regulator-name = "vcc18_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc18_wl>;
|
||||
};
|
||||
|
||||
backlight_regulator: backlight-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_pwr_en>;
|
||||
regulator-name = "backlight_regulator";
|
||||
vin-supply = <&vcc33_sys>;
|
||||
startup-delay-us = <15000>;
|
||||
};
|
||||
};
|
||||
|
||||
&rk808 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
&sdmmc_bus4>;
|
||||
};
|
||||
|
||||
&vcc_5v {
|
||||
enable-active-high;
|
||||
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&drv_5v>;
|
||||
};
|
||||
|
||||
&vcc50_hdmi {
|
||||
enable-active-high;
|
||||
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc50_hdmi_en>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
backlight {
|
||||
bl_pwr_en: bl_pwr_en {
|
||||
rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
buck-5v {
|
||||
drv_5v: drv-5v {
|
||||
rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi {
|
||||
vcc50_hdmi_en: vcc50-hdmi-en {
|
||||
rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd {
|
||||
lcd_enable_h: lcd-en {
|
||||
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
avdd_1v8_disp_en: avdd-1v8-disp-en {
|
||||
rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
dvs_1: dvs-1 {
|
||||
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
dvs_2: dvs-2 {
|
||||
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -367,8 +367,8 @@ &spi2 {
|
|||
&tsadc {
|
||||
status = "okay";
|
||||
|
||||
tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
||||
tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
|
|
|||
|
|
@ -169,6 +169,26 @@ dmac_bus_s: dma-controller@ffb20000 {
|
|||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
/*
|
||||
* The rk3288 cannot use the memory area above 0xfe000000
|
||||
* for dma operations for some reason. While there is
|
||||
* probably a better solution available somewhere, we
|
||||
* haven't found it yet and while devices with 2GB of ram
|
||||
* are not affected, this issue prevents 4GB from booting.
|
||||
* So to make these devices at least bootable, block
|
||||
* this area for the time being until the real solution
|
||||
* is found.
|
||||
*/
|
||||
dma-unusable@fe000000 {
|
||||
reg = <0xfe000000 0x1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
xin24m: oscillator {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
|
|
|
|||
|
|
@ -172,6 +172,13 @@ usb_otg: usb@10180000 {
|
|||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_OTG0>;
|
||||
clock-names = "otg";
|
||||
dr_mode = "otg";
|
||||
g-np-tx-fifo-size = <16>;
|
||||
g-rx-fifo-size = <275>;
|
||||
g-tx-fifo-size = <256 128 128 64 64 32>;
|
||||
g-use-dma;
|
||||
phys = <&usbphy0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -181,6 +188,9 @@ usb_host: usb@101c0000 {
|
|||
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_OTG1>;
|
||||
clock-names = "otg";
|
||||
dr_mode = "host";
|
||||
phys = <&usbphy1>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue