p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

altera tse: Error-Bit on tx-avalon-stream always set. 

The Error-Bit on the avalon streaming interface of the
tx-dma-channel was always set. In SGMII configurations
this leads to error-symbols on the PCS and packet-rejection
on the receiver side (e.g. SGMII/1000Base-X connected switch).

This only applies to the tse-configuration with MSGDMA.

This issue was detected and fixed on a custom board with
a direct connection to a Marvell switch in SGMII-PHY-Mode.
(incl. custom patches for SGMII-PCS).

According to the datasheet if ff_tx_err (avalon-streaming)
is set it is forwarded to gm_tx_err. As a result the PCS
is forwarding the error by sending a "/V/"-caracter.

Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andreas Oetken 2015-04-21 00:16:38 +02:00 committed by David S. Miller
parent 47cf1e659e
commit 71cd26e76a
1 changed files with 0 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/net/ethernet/altera/altera_msgdmahw.h
View File

@ -72,7 +72,6 @@ struct msgdma_extended_desc {
#define MSGDMA_DESC_CTL_TX_SINGLE (MSGDMA_DESC_CTL_GEN_SOP | \
MSGDMA_DESC_CTL_GEN_EOP | \
MSGDMA_DESC_CTL_TR_COMP_IRQ | \
MSGDMA_DESC_CTL_TR_ERR_IRQ | \
MSGDMA_DESC_CTL_GO)
#define MSGDMA_DESC_CTL_RX_SINGLE (MSGDMA_DESC_CTL_END_ON_EOP | \