p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

dt-bindings: net: Revert sun8i dwmac binding 

This binding still doesn't please everyone, and we're getting far too
close from the release to allow it to reach a stable version.

Let's remove it until the discussion settles down.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
Maxime Ripard 2017-08-25 20:34:35 +02:00
parent d86e63e1f0
commit 8aa33ec2f4
1 changed files with 0 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

84
Documentation/devicetree/bindings/net/dwmac-sun8i.txt
View File

@ -1,84 +0,0 @@
* Allwinner sun8i GMAC ethernet controller
This device is a platform glue layer for stmmac.
Please see stmmac.txt for the other unchanged properties.
Required properties:
- compatible: should be one of the following string:
"allwinner,sun8i-a83t-emac"
"allwinner,sun8i-h3-emac"
"allwinner,sun8i-v3s-emac"
"allwinner,sun50i-a64-emac"
- reg: address and length of the register for the device.
- interrupts: interrupt for the device
- interrupt-names: should be "macirq"
- clocks: A phandle to the reference clock for this device
- clock-names: should be "stmmaceth"
- resets: A phandle to the reset control for this device
- reset-names: should be "stmmaceth"
- phy-mode: See ethernet.txt
- phy-handle: See ethernet.txt
- #address-cells: shall be 1
- #size-cells: shall be 0
- syscon: A phandle to the syscon of the SoC with one of the following
compatible string:
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
- allwinner,sun8i-a83t-system-controller
Optional properties:
- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
Both delay properties need to be a multiple of 100. They control the delay for
external PHY.
Optional properties for the following compatibles:
- "allwinner,sun8i-h3-emac",
- "allwinner,sun8i-v3s-emac":
- allwinner,leds-active-low: EPHY LEDs are active low
Required child node of emac:
- mdio bus node: should be named mdio
Required properties of the mdio node:
- #address-cells: shall be 1
- #size-cells: shall be 0
The device node referenced by "phy" or "phy-handle" should be a child node
of the mdio node. See phy.txt for the generic PHY bindings.
Required properties of the phy node with the following compatibles:
- "allwinner,sun8i-h3-emac",
- "allwinner,sun8i-v3s-emac":
- clocks: a phandle to the reference clock for the EPHY
- resets: a phandle to the reset control for the EPHY
Example:
emac: ethernet@1c0b000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
int_mii_phy: ethernet-phy@1 {
reg = <1>;
clocks = <&ccu CLK_BUS_EPHY>;
resets = <&ccu RST_BUS_EPHY>;
};
};
};