phy: renesas: rcar-gen3-usb2: Check a property to use otg pins

Since All R-Car Gen3 SoCs have dedicated otg pins actually but
some boards don't use the otg pins (e.g. R-Car D3 Draak and R-Car E3
Ebisu), the driver should not choose SoC model base by using
rcar_gen3_phy_usb2_match_table's data. So, this patch checks a
"renesas,no-otg-pins" property to set the "uses_otg_pins".

Note that since r8a77995-draak.dts and r8a77990-ebisu.dts don't have
'dr_mode = "otg";' for now, if we apply this patch, no behavior
changes (the value of "uses_otg_pins" is false).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Yoshihiro Shimoda 2018-09-21 20:53:20 +09:00 committed by Kishon Vijay Abraham I
parent cfdc66348e
commit 8dde0008ff
1 changed files with 6 additions and 18 deletions

View File

@ -78,8 +78,6 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS 1
struct rcar_gen3_chan {
void __iomem *base;
struct extcon_dev *extcon;
@ -385,21 +383,10 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
}
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{
.compatible = "renesas,usb2-phy-r8a7795",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,usb2-phy-r8a7796",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,usb2-phy-r8a77965",
.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
},
{
.compatible = "renesas,rcar-gen3-usb2-phy",
},
{ .compatible = "renesas,usb2-phy-r8a7795" },
{ .compatible = "renesas,usb2-phy-r8a7796" },
{ .compatible = "renesas,usb2-phy-r8a77965" },
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@ -445,7 +432,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
int ret;
channel->uses_otg_pins = (uintptr_t)of_device_get_match_data(dev);
channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
"renesas,no-otg-pins");
channel->extcon = devm_extcon_dev_allocate(dev,
rcar_gen3_phy_cable);
if (IS_ERR(channel->extcon))