ath6kl: report antenna configuration

This lets 'iw phy phy0 info' report antennas for
the radio device:

...
	Available Antennas: TX 0x2 RX 0x2
	Configured Antennas: TX 0x2 RX 0x2
...

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Ben Greear 2015-10-21 14:53:19 -07:00 committed by Kalle Valo
parent 5140a5fde2
commit 9c2e90ffc9
2 changed files with 19 additions and 0 deletions

View File

@ -3231,6 +3231,15 @@ static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
wait, buf, len, no_cck);
}
static int ath6kl_get_antenna(struct wiphy *wiphy,
u32 *tx_ant, u32 *rx_ant)
{
struct ath6kl *ar = wiphy_priv(wiphy);
*tx_ant = ar->hw.tx_ant;
*rx_ant = ar->hw.rx_ant;
return 0;
}
static void ath6kl_mgmt_frame_register(struct wiphy *wiphy,
struct wireless_dev *wdev,
u16 frame_type, bool reg)
@ -3447,6 +3456,7 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
.cancel_remain_on_channel = ath6kl_cancel_remain_on_channel,
.mgmt_tx = ath6kl_mgmt_tx,
.mgmt_frame_register = ath6kl_mgmt_frame_register,
.get_antenna = ath6kl_get_antenna,
.sched_scan_start = ath6kl_cfg80211_sscan_start,
.sched_scan_stop = ath6kl_cfg80211_sscan_stop,
.set_bitrate_mask = ath6kl_cfg80211_set_bitrate,
@ -3794,11 +3804,18 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
ath6kl_band_2ghz.ht_cap.mcs.rx_mask[1] = 0xff;
ath6kl_band_5ghz.ht_cap.mcs.rx_mask[1] = 0xff;
ar->hw.tx_ant = 2;
ar->hw.rx_ant = 2;
} else {
ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff;
ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
ar->hw.tx_ant = 1;
ar->hw.rx_ant = 1;
}
wiphy->available_antennas_tx = ar->hw.tx_ant;
wiphy->available_antennas_rx = ar->hw.rx_ant;
if (band_2gig)
wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz;
if (band_5gig)

View File

@ -782,6 +782,8 @@ struct ath6kl {
u32 refclk_hz;
u32 uarttx_pin;
u32 testscript_addr;
u8 tx_ant;
u8 rx_ant;
enum wmi_phy_cap cap;
u32 flags;