From 2f46993d83ff4abb310ef7b4beced56ba96f0d9d Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Wed, 4 Nov 2020 18:50:54 -0500 Subject: [PATCH 1/2] x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl Switch the kernel default of SSBD and STIBP to the ones with CONFIG_SECCOMP=n (i.e. spec_store_bypass_disable=prctl spectre_v2_user=prctl) even if CONFIG_SECCOMP=y. Several motivations listed below: - If SMT is enabled the seccomp jail can still attack the rest of the system even with spectre_v2_user=seccomp by using MDS-HT (except on XEON PHI where MDS can be tamed with SMT left enabled, but that's a special case). Setting STIBP become a very expensive window dressing after MDS-HT was discovered. - The seccomp jail cannot attack the kernel with spectre-v2-HT regardless (even if STIBP is not set), but with MDS-HT the seccomp jail can attack the kernel too. - With spec_store_bypass_disable=prctl the seccomp jail can attack the other userland (guest or host mode) using spectre-v2-HT, but the userland attack is already mitigated by both ASLR and pid namespaces for host userland and through virt isolation with libkrun or kata. (if something if somebody is worried about spectre-v2-HT it's best to mount proc with hidepid=2,gid=proc on workstations where not all apps may run under container runtimes, rather than slowing down all seccomp jails, but the best is to add pid namespaces to the seccomp jail). As opposed MDS-HT is not mitigated and the seccomp jail can still attack all other host and guest userland if SMT is enabled even with spec_store_bypass_disable=seccomp. - If full security is required then MDS-HT must also be mitigated with nosmt and then spectre_v2_user=prctl and spectre_v2_user=seccomp would become identical. - Setting spectre_v2_user=seccomp is overall lower priority than to setting javascript.options.wasm false in about:config to protect against remote wasm MDS-HT, instead of worrying about Spectre-v2-HT and STIBP which again is already statistically well mitigated by other means in userland and it's fully mitigated in kernel with retpolines (unlike the wasm assist call with MDS-HT). - SSBD is needed to prevent reading the JIT memory and the primary user being the OpenJDK. However the primary user of SSBD wouldn't be covered by spec_store_bypass_disable=seccomp because it doesn't use seccomp and the primary user also explicitly declined to set PR_SET_SPECULATION_CTRL+PR_SPEC_STORE_BYPASS despite it easily could. In fact it would need to set it only when the sandboxing mechanism is enabled for javaws applets, but it still declined it by declaring security within the same user address space as an untenable objective for their JIT, even in the sandboxing case where performance would be a lesser concern (for the record: I kind of disagree in not setting PR_SPEC_STORE_BYPASS in the sandbox case and I prefer to run javaws through a wrapper that sets PR_SPEC_STORE_BYPASS if I need). In turn it can be inferred that even if the primary user of SSBD would use seccomp, they would invoke it with SECCOMP_FILTER_FLAG_SPEC_ALLOW by now. - runc/crun already set SECCOMP_FILTER_FLAG_SPEC_ALLOW by default, k8s and podman have a default json seccomp allowlist that cannot be slowed down, so for the #1 seccomp user this change is already a noop. - systemd/sshd or other apps that use seccomp, if they really need STIBP or SSBD, they need to explicitly set the PR_SET_SPECULATION_CTRL by now. The stibp/ssbd seccomp blind catch-all approach was done probably initially with a wishful thinking objective to pretend to have a peace of mind that it could magically fix it all. That was wishful thinking before MDS-HT was discovered, but after MDS-HT has been discovered it become just window dressing. - For qemu "-sandbox" seccomp jail it wouldn't make sense to set STIBP or SSBD. SSBD doesn't help with KVM because there's no JIT (if it's needed with TCG it should be an opt-in with PR_SET_SPECULATION_CTRL+PR_SPEC_STORE_BYPASS and it shouldn't slowdown KVM for nothing). For qemu+KVM STIBP would be even more window dressing than it is for all other apps, because in the qemu+KVM case there's not only the MDS attack to worry about with SMT enabled. Even after disabling SMT, there's still a theoretical spectre-v2 attack possible within the same thread context from guest mode to host ring3 that the host kernel retpoline mitigation has no theoretical chance to mitigate. On some kernels a ibrs-always/ibrs-retpoline opt-in model is provided that will enabled IBRS in the qemu host ring3 userland which fixes this theoretical concern. Only after enabling IBRS in the host userland it would then make sense to proceed and worry about STIBP and an attack on the other host userland, but then again SMT would need to be disabled for full security anyway, so that would render STIBP again a noop. - last but not the least: the lack of "spec_store_bypass_disable=prctl spectre_v2_user=prctl" means the moment a guest boots and sshd/systemd runs, the guest kernel will write to SPEC_CTRL MSR which will make the guest vmexit forever slower, forcing KVM to issue a very slow rdmsr instruction at every vmexit. So the end result is that SPEC_CTRL MSR is only available in GCE. Most other public cloud providers don't expose SPEC_CTRL, which means that not only STIBP/SSBD isn't available, but IBPB isn't available either (which would cause no overhead to the guest or the hypervisor because it's write only and requires no reading during vmexit). So the current default already net loss in security (missing IBPB) which means most public cloud providers cannot achieve a fully secure guest with nosmt (and nosmt is enough to fully mitigate MDS-HT). It also means GCE and is unfairly penalized in performance because it provides the option to enable full security in the guest as an opt-in (i.e. nosmt and IBPB). So this change will allow all cloud providers to expose SPEC_CTRL without incurring into any hypervisor slowdown and at the same time it will remove the unfair penalization of GCE performance for doing the right thing and it'll allow to get full security with nosmt with IBPB being available (and STIBP becoming meaningless). Example to put things in prospective: the STIBP enabled in seccomp has never been about protecting apps using seccomp like sshd from an attack from a malicious userland, but to the contrary it has always been about protecting the system from an attack from sshd, after a successful remote network exploit against sshd. In fact initially it wasn't obvious STIBP would work both ways (STIBP was about preventing the task that runs with STIBP to be attacked with spectre-v2-HT, but accidentally in the STIBP case it also prevents the attack in the other direction). In the hypothetical case that sshd has been remotely exploited the last concern should be STIBP being set, because it'll be still possible to obtain info even from the kernel by using MDS if nosmt wasn't set (and if it was set, STIBP is a noop in the first place). As opposed kernel cannot leak anything with spectre-v2 HT because of retpolines and the userland is mitigated by ASLR already and ideally PID namespaces too. If something it'd be worth checking if sshd run the seccomp thread under pid namespaces too if available in the running kernel. SSBD also would be a noop for sshd, since sshd uses no JIT. If sshd prefers to keep doing the STIBP window dressing exercise, it still can even after this change of defaults by opting-in with PR_SPEC_INDIRECT_BRANCH. Ultimately setting SSBD and STIBP by default for all seccomp jails is a bad sweet spot and bad default with more cons than pros that end up reducing security in the public cloud (by giving an huge incentive to not expose SPEC_CTRL which would be needed to get full security with IBPB after setting nosmt in the guest) and by excessively hurting performance to more secure apps using seccomp that end up having to opt out with SECCOMP_FILTER_FLAG_SPEC_ALLOW. The following is the verified result of the new default with SMT enabled: (gdb) print spectre_v2_user_stibp $1 = SPECTRE_V2_USER_PRCTL (gdb) print spectre_v2_user_ibpb $2 = SPECTRE_V2_USER_PRCTL (gdb) print ssb_mode $3 = SPEC_STORE_BYPASS_PRCTL Signed-off-by: Andrea Arcangeli Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20201104235054.5678-1-aarcange@redhat.com Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/lkml/AAA2EF2C-293D-4D5B-BFA6-FF655105CD84@redhat.com Acked-by: Waiman Long Link: https://lore.kernel.org/lkml/c0722838-06f7-da6b-138f-e0f26362f16a@redhat.com --- Documentation/admin-guide/hw-vuln/spectre.rst | 10 ++++------ Documentation/admin-guide/kernel-parameters.txt | 5 ++--- arch/x86/kernel/cpu/bugs.c | 4 ++-- 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index e05e581af5cf..19b897cb1d45 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -490,9 +490,8 @@ Spectre variant 2 Restricting indirect branch speculation on a user program will also prevent the program from launching a variant 2 attack - on x86. All sand-boxed SECCOMP programs have indirect branch - speculation restricted by default. Administrators can change - that behavior via the kernel command line and sysfs control files. + on x86. Administrators can change that behavior via the kernel + command line and sysfs control files. See :ref:`spectre_mitigation_control_command_line`. Programs that disable their indirect branch speculation will have @@ -674,9 +673,8 @@ Mitigation selection guide off by disabling their indirect branch speculation when they are run (See :ref:`Documentation/userspace-api/spec_ctrl.rst `). This prevents untrusted programs from polluting the branch target - buffer. All programs running in SECCOMP sandboxes have indirect - branch speculation restricted by default. This behavior can be - changed via the kernel command line and sysfs control files. See + buffer. This behavior can be changed via the kernel command line + and sysfs control files. See :ref:`spectre_mitigation_control_command_line`. 3. High security mode diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 91ba391f9b32..e4cf032f4f3e 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5303,8 +5303,7 @@ auto - Kernel selects the mitigation depending on the available CPU features and vulnerability. - Default mitigation: - If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl" + Default mitigation: "prctl" Not specifying this option is equivalent to spectre_v2_user=auto. @@ -5348,7 +5347,7 @@ will disable SSB unless they explicitly opt out. Default mitigations: - X86: If CONFIG_SECCOMP=y "seccomp", otherwise "prctl" + X86: "prctl" On powerpc the options are: diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index ecfca3bbcd96..2062abc602f9 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -758,11 +758,11 @@ spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd) case SPECTRE_V2_USER_CMD_FORCE: mode = SPECTRE_V2_USER_STRICT; break; + case SPECTRE_V2_USER_CMD_AUTO: case SPECTRE_V2_USER_CMD_PRCTL: case SPECTRE_V2_USER_CMD_PRCTL_IBPB: mode = SPECTRE_V2_USER_PRCTL; break; - case SPECTRE_V2_USER_CMD_AUTO: case SPECTRE_V2_USER_CMD_SECCOMP: case SPECTRE_V2_USER_CMD_SECCOMP_IBPB: if (IS_ENABLED(CONFIG_SECCOMP)) @@ -1169,7 +1169,6 @@ static enum ssb_mitigation __init __ssb_select_mitigation(void) return mode; switch (cmd) { - case SPEC_STORE_BYPASS_CMD_AUTO: case SPEC_STORE_BYPASS_CMD_SECCOMP: /* * Choose prctl+seccomp as the default mode if seccomp is @@ -1183,6 +1182,7 @@ static enum ssb_mitigation __init __ssb_select_mitigation(void) case SPEC_STORE_BYPASS_CMD_ON: mode = SPEC_STORE_BYPASS_DISABLE; break; + case SPEC_STORE_BYPASS_CMD_AUTO: case SPEC_STORE_BYPASS_CMD_PRCTL: mode = SPEC_STORE_BYPASS_PRCTL; break; From d9bbdbf324cda23aa44873f505be77ed4b61d79c Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Wed, 4 Nov 2020 19:14:06 -0500 Subject: [PATCH 2/2] x86: deduplicate the spectre_v2_user documentation This would need updating to make prctl be the new default, but it's simpler to delete it and refer to the dup. Signed-off-by: Andrea Arcangeli Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20201105001406.13005-2-aarcange@redhat.com --- Documentation/admin-guide/hw-vuln/spectre.rst | 51 +------------------ 1 file changed, 2 insertions(+), 49 deletions(-) diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 19b897cb1d45..ab7d402c1677 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -593,61 +593,14 @@ kernel command line. Not specifying this option is equivalent to spectre_v2=auto. -For user space mitigation: - - spectre_v2_user= - - [X86] Control mitigation of Spectre variant 2 - (indirect branch speculation) vulnerability between - user space tasks - - on - Unconditionally enable mitigations. Is - enforced by spectre_v2=on - - off - Unconditionally disable mitigations. Is - enforced by spectre_v2=off - - prctl - Indirect branch speculation is enabled, - but mitigation can be enabled via prctl - per thread. The mitigation control state - is inherited on fork. - - prctl,ibpb - Like "prctl" above, but only STIBP is - controlled per thread. IBPB is issued - always when switching between different user - space processes. - - seccomp - Same as "prctl" above, but all seccomp - threads will enable the mitigation unless - they explicitly opt out. - - seccomp,ibpb - Like "seccomp" above, but only STIBP is - controlled per thread. IBPB is issued - always when switching between different - user space processes. - - auto - Kernel selects the mitigation depending on - the available CPU features and vulnerability. - - Default mitigation: - If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl" - - Not specifying this option is equivalent to - spectre_v2_user=auto. - In general the kernel by default selects reasonable mitigations for the current CPU. To disable Spectre variant 2 mitigations, boot with spectre_v2=off. Spectre variant 1 mitigations cannot be disabled. +For spectre_v2_user see :doc:`/admin-guide/kernel-parameters`. + Mitigation selection guide --------------------------