From 889bcbdeee57376b7724e3cff46931c1a951bf3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 30 Jan 2019 11:24:04 +1000 Subject: [PATCH 1/3] net: ethernet: mediatek: support MT7621 SoC ethernet hardware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Mediatek MT7621 SoC contains the same ethernet hardware module as used on a number of other MediaTek SoC parts. There are some minor differences to deal with but we can use the same driver to support them all. This patch is based on work by Bjørn Mork , and his original patch is at: https://github.com/bmork/LEDE/commit/3293bc63f5461ca1eb0bbc4ed90145335e7e3404 There is an additional compatible devicetree type added, and the primary change to the code required is to support a single interrupt (for both RX and TX interrupts). Signed-off-by: Bjørn Mork [gerg@kernel.org: rebase to mainline and irq handler fix] Signed-off-by: Greg Ungerer Reviewed-by: Florian Fainelli Acked-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/Kconfig | 2 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 48 ++++++++++++++++++--- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++ 3 files changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig index f9149d2a4694..43656f961891 100644 --- a/drivers/net/ethernet/mediatek/Kconfig +++ b/drivers/net/ethernet/mediatek/Kconfig @@ -1,6 +1,6 @@ config NET_VENDOR_MEDIATEK bool "MediaTek ethernet driver" - depends on ARCH_MEDIATEK + depends on ARCH_MEDIATEK || SOC_MT7621 ---help--- If you have a Mediatek SoC with ethernet, say Y. diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 49f926b7a91c..94d4663e3933 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1745,6 +1745,22 @@ static irqreturn_t mtk_handle_irq_tx(int irq, void *_eth) return IRQ_HANDLED; } +static irqreturn_t mtk_handle_irq(int irq, void *_eth) +{ + struct mtk_eth *eth = _eth; + + if (mtk_r32(eth, MTK_PDMA_INT_MASK) & MTK_RX_DONE_INT) { + if (mtk_r32(eth, MTK_PDMA_INT_STATUS) & MTK_RX_DONE_INT) + mtk_handle_irq_rx(irq, _eth); + } + if (mtk_r32(eth, MTK_QDMA_INT_MASK) & MTK_TX_DONE_INT) { + if (mtk_r32(eth, MTK_QMTK_INT_STATUS) & MTK_TX_DONE_INT) + mtk_handle_irq_tx(irq, _eth); + } + + return IRQ_HANDLED; +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void mtk_poll_controller(struct net_device *dev) { @@ -2485,7 +2501,10 @@ static int mtk_probe(struct platform_device *pdev) } for (i = 0; i < 3; i++) { - eth->irq[i] = platform_get_irq(pdev, i); + if (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_INT) && i > 0) + eth->irq[i] = eth->irq[0]; + else + eth->irq[i] = platform_get_irq(pdev, i); if (eth->irq[i] < 0) { dev_err(&pdev->dev, "no IRQ%d resource found\n", i); return -ENXIO; @@ -2528,13 +2547,21 @@ static int mtk_probe(struct platform_device *pdev) goto err_deinit_hw; } - err = devm_request_irq(eth->dev, eth->irq[1], mtk_handle_irq_tx, 0, - dev_name(eth->dev), eth); - if (err) - goto err_free_dev; + if (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_INT)) { + err = devm_request_irq(eth->dev, eth->irq[0], + mtk_handle_irq, 0, + dev_name(eth->dev), eth); + } else { + err = devm_request_irq(eth->dev, eth->irq[1], + mtk_handle_irq_tx, 0, + dev_name(eth->dev), eth); + if (err) + goto err_free_dev; - err = devm_request_irq(eth->dev, eth->irq[2], mtk_handle_irq_rx, 0, - dev_name(eth->dev), eth); + err = devm_request_irq(eth->dev, eth->irq[2], + mtk_handle_irq_rx, 0, + dev_name(eth->dev), eth); + } if (err) goto err_free_dev; @@ -2607,6 +2634,12 @@ static const struct mtk_soc_data mt2701_data = { .required_pctl = true, }; +static const struct mtk_soc_data mt7621_data = { + .caps = MTK_SHARED_INT, + .required_clks = MT7621_CLKS_BITMAP, + .required_pctl = false, +}; + static const struct mtk_soc_data mt7622_data = { .caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW | MTK_HWLRO, .required_clks = MT7622_CLKS_BITMAP, @@ -2621,6 +2654,7 @@ static const struct mtk_soc_data mt7623_data = { const struct of_device_id of_mtk_match[] = { { .compatible = "mediatek,mt2701-eth", .data = &mt2701_data}, + { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data}, { .compatible = "mediatek,mt7622-eth", .data = &mt7622_data}, { .compatible = "mediatek,mt7623-eth", .data = &mt7623_data}, {}, diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 46819297fc3e..f7501997cea0 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -363,6 +363,7 @@ #define ETHSYS_CHIPID4_7 0x4 #define MT7623_ETH 7623 #define MT7622_ETH 7622 +#define MT7621_ETH 7621 /* ethernet subsystem config register */ #define ETHSYS_SYSCFG0 0x14 @@ -488,6 +489,8 @@ enum mtk_clks_map { BIT(MTK_CLK_SGMII_CDR_FB) | \ BIT(MTK_CLK_SGMII_CK) | \ BIT(MTK_CLK_ETH2PLL)) +#define MT7621_CLKS_BITMAP (0) + enum mtk_dev_state { MTK_HW_INIT, MTK_RESETTING @@ -567,6 +570,7 @@ struct mtk_rx_ring { #define MTK_DUAL_GMAC_SHARED_SGMII (BIT(11) | MTK_GMAC1_SGMII | \ MTK_GMAC2_SGMII) #define MTK_HWLRO BIT(12) +#define MTK_SHARED_INT BIT(13) #define MTK_HAS_CAPS(caps, _x) (((caps) & (_x)) == (_x)) /* struct mtk_eth_data - This is the structure holding all differences From ddda1ac116c852bb969541ed53cffef7255c4961 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 30 Jan 2019 11:24:05 +1000 Subject: [PATCH 2/3] net: dsa: mt7530: support the 7530 switch on the Mediatek MT7621 SoC The MediaTek MT7621 SoC device contains a 7530 switch, and the existing linux kernel 7530 DSA switch driver can be used with it. The bulk of the changes required stem from the 7621 having different regulator and pad setup. The existing setup of these in the 7530 driver appears to be very specific to its implemtation in the Mediatek 7623 SoC. (Not entirely surprising given the 7623 is a quad core ARM based SoC, and the 7621 is a dual core, dual thread MIPS based SoC). Create a new devicetree type, "mediatek,mt7621", to support the 7530 switch in the 7621 SoC. There appears to be no usable ID register to distinguish it from a 7530 in other hardware at runtime. This is used to carry out the appropriate configuration and setup. Signed-off-by: Greg Ungerer Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Acked-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 92 ++++++++++++++++++++++++---------------- drivers/net/dsa/mt7530.h | 9 ++++ 2 files changed, 64 insertions(+), 37 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index a8a2c728afba..c2b61500f958 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -621,17 +621,19 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port, struct mt7530_priv *priv = ds->priv; if (phy_is_pseudo_fixed_link(phydev)) { - dev_dbg(priv->dev, "phy-mode for master device = %x\n", - phydev->interface); + if (priv->id == ID_MT7530) { + dev_dbg(priv->dev, "phy-mode for master device = %x\n", + phydev->interface); - /* Setup TX circuit incluing relevant PAD and driving */ - mt7530_pad_clk_setup(ds, phydev->interface); + /* Setup TX circuit incluing relevant PAD and driving */ + mt7530_pad_clk_setup(ds, phydev->interface); - /* Setup RX circuit, relevant PAD and driving on the host - * which must be placed after the setup on the device side is - * all finished. - */ - mt7623_pad_clk_setup(ds); + /* Setup RX circuit, relevant PAD and driving on the + * host which must be placed after the setup on the + * device side is all finished. + */ + mt7623_pad_clk_setup(ds); + } } else { u16 lcl_adv = 0, rmt_adv = 0; u8 flowctrl; @@ -687,6 +689,10 @@ mt7530_cpu_port_enable(struct mt7530_priv *priv, /* Unknown unicast frame fordwarding to the cpu port */ mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port))); + /* Set CPU port number */ + if (priv->id == ID_MT7621) + mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); + /* CPU port gets connected to all user ports of * the switch */ @@ -1219,24 +1225,27 @@ mt7530_setup(struct dsa_switch *ds) * as two netdev instances. */ dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent; - priv->ethernet = syscon_node_to_regmap(dn); - if (IS_ERR(priv->ethernet)) - return PTR_ERR(priv->ethernet); - regulator_set_voltage(priv->core_pwr, 1000000, 1000000); - ret = regulator_enable(priv->core_pwr); - if (ret < 0) { - dev_err(priv->dev, - "Failed to enable core power: %d\n", ret); - return ret; - } + if (priv->id == ID_MT7530) { + priv->ethernet = syscon_node_to_regmap(dn); + if (IS_ERR(priv->ethernet)) + return PTR_ERR(priv->ethernet); - regulator_set_voltage(priv->io_pwr, 3300000, 3300000); - ret = regulator_enable(priv->io_pwr); - if (ret < 0) { - dev_err(priv->dev, "Failed to enable io pwr: %d\n", - ret); - return ret; + regulator_set_voltage(priv->core_pwr, 1000000, 1000000); + ret = regulator_enable(priv->core_pwr); + if (ret < 0) { + dev_err(priv->dev, + "Failed to enable core power: %d\n", ret); + return ret; + } + + regulator_set_voltage(priv->io_pwr, 3300000, 3300000); + ret = regulator_enable(priv->io_pwr); + if (ret < 0) { + dev_err(priv->dev, "Failed to enable io pwr: %d\n", + ret); + return ret; + } } /* Reset whole chip through gpio pin or memory-mapped registers for @@ -1326,6 +1335,13 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .port_vlan_del = mt7530_port_vlan_del, }; +static const struct of_device_id mt7530_of_match[] = { + { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, }, + { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt7530_of_match); + static int mt7530_probe(struct mdio_device *mdiodev) { @@ -1356,13 +1372,21 @@ mt7530_probe(struct mdio_device *mdiodev) } } - priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); - if (IS_ERR(priv->core_pwr)) - return PTR_ERR(priv->core_pwr); + /* Get the hardware identifier from the devicetree node. + * We will need it for some of the clock and regulator setup. + */ + priv->id = (unsigned int)(unsigned long) + of_device_get_match_data(&mdiodev->dev); - priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); - if (IS_ERR(priv->io_pwr)) - return PTR_ERR(priv->io_pwr); + if (priv->id == ID_MT7530) { + priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); + if (IS_ERR(priv->core_pwr)) + return PTR_ERR(priv->core_pwr); + + priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); + if (IS_ERR(priv->io_pwr)) + return PTR_ERR(priv->io_pwr); + } /* Not MCM that indicates switch works as the remote standalone * integrated circuit so the GPIO pin would be used to complete @@ -1408,12 +1432,6 @@ mt7530_remove(struct mdio_device *mdiodev) mutex_destroy(&priv->reg_mutex); } -static const struct of_device_id mt7530_of_match[] = { - { .compatible = "mediatek,mt7530" }, - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, mt7530_of_match); - static struct mdio_driver mt7530_mdio_driver = { .probe = mt7530_probe, .remove = mt7530_remove, diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index d9b407a22a58..a95ed958df5b 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -19,6 +19,11 @@ #define MT7530_NUM_FDB_RECORDS 2048 #define MT7530_ALL_MEMBERS 0xff +enum { + ID_MT7530 = 0, + ID_MT7621 = 1, +}; + #define NUM_TRGMII_CTRL 5 #define TRGMII_BASE(x) (0x10000 + (x)) @@ -36,6 +41,9 @@ #define UNM_FFP(x) (((x) & 0xff) << 16) #define UNU_FFP(x) (((x) & 0xff) << 8) #define UNU_FFP_MASK UNU_FFP(~0) +#define CPU_EN BIT(7) +#define CPU_PORT(x) ((x) << 4) +#define CPU_MASK (0xf << 4) /* Registers for address table access */ #define MT7530_ATA1 0x74 @@ -430,6 +438,7 @@ struct mt7530_priv { struct regulator *core_pwr; struct regulator *io_pwr; struct gpio_desc *reset; + unsigned int id; bool mcm; struct mt7530_port ports[MT7530_NUM_PORTS]; From 9389b5e9467f71360d83310502de1ba0dc8960f1 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 30 Jan 2019 11:24:06 +1000 Subject: [PATCH 3/3] dt-bindings: net: dsa: add new MT7530 binding to support MT7621 Add devicetree binding to support the compatible mt7530 switch as used in the MediaTek MT7621 SoC. Signed-off-by: Greg Ungerer Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Acked-by: Sean Wang Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index aa3527f71fdc..47aa205ee0bd 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch Required properties: -- compatible: Must be compatible = "mediatek,mt7530"; +- compatible: may be compatible = "mediatek,mt7530" + or compatible = "mediatek,mt7621" - #address-cells: Must be 1. - #size-cells: Must be 0. - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part on multi-chip module belong to MT7623A has or the remotely standalone chip as the function MT7623N reference board provided for. + +If compatible mediatek,mt7530 is set then the following properties are required + - core-supply: Phandle to the regulator node necessary for the core power. - io-supply: Phandle to the regulator node necessary for the I/O power. See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt