diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c index ecc4a334c507..f71ab2647a3b 100644 --- a/drivers/net/ethernet/aurora/nb8800.c +++ b/drivers/net/ethernet/aurora/nb8800.c @@ -302,7 +302,7 @@ static int nb8800_poll(struct napi_struct *napi, int budget) nb8800_tx_done(dev); again: - while (work < budget) { + do { struct nb8800_rx_buf *rxb; unsigned int len; @@ -330,7 +330,7 @@ static int nb8800_poll(struct napi_struct *napi, int budget) rxd->report = 0; last = next; work++; - } + } while (work < budget); if (work) { priv->rx_descs[last].desc.config |= DESC_EOC; diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 8550df189ceb..19f7cd02e085 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -151,8 +151,11 @@ config BNX2X_VXLAN config BGMAC tristate "BCMA bus GBit core support" - depends on BCMA_HOST_SOC && HAS_DMA && (BCM47XX || ARCH_BCM_5301X) + depends on BCMA && BCMA_HOST_SOC + depends on HAS_DMA + depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST select PHYLIB + select FIXED_PHY ---help--- This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. They can be found on BCM47xx SoCs and provide gigabit ethernet. diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 9293675df7ba..49eea8981332 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -12016,7 +12016,7 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, int ret; u32 offset, len, b_offset, odd_len; u8 *buf; - __be32 start, end; + __be32 start = 0, end; if (tg3_flag(tp, NO_NVRAM) || eeprom->magic != TG3_EEPROM_MAGIC) diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c index 1d5c3e16d8f4..3daf2d4a7ca0 100644 --- a/drivers/net/ethernet/hp/hp100.c +++ b/drivers/net/ethernet/hp/hp100.c @@ -194,7 +194,6 @@ static const char *hp100_isa_tbl[] = { }; #endif -#ifdef CONFIG_EISA static struct eisa_device_id hp100_eisa_tbl[] = { { "HWPF180" }, /* HP J2577 rev A */ { "HWP1920" }, /* HP 27248B */ @@ -205,9 +204,7 @@ static struct eisa_device_id hp100_eisa_tbl[] = { { "" } /* Mandatory final entry ! */ }; MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl); -#endif -#ifdef CONFIG_PCI static const struct pci_device_id hp100_pci_tbl[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,}, @@ -219,7 +216,6 @@ static const struct pci_device_id hp100_pci_tbl[] = { {} /* Terminating entry */ }; MODULE_DEVICE_TABLE(pci, hp100_pci_tbl); -#endif static int hp100_rx_ratio = HP100_DEFAULT_RX_RATIO; static int hp100_priority_tx = HP100_DEFAULT_PRIORITY_TX; @@ -2842,7 +2838,6 @@ static void cleanup_dev(struct net_device *d) free_netdev(d); } -#ifdef CONFIG_EISA static int hp100_eisa_probe(struct device *gendev) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); @@ -2884,9 +2879,7 @@ static struct eisa_driver hp100_eisa_driver = { .remove = hp100_eisa_remove, } }; -#endif -#ifdef CONFIG_PCI static int hp100_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2955,7 +2948,6 @@ static struct pci_driver hp100_pci_driver = { .probe = hp100_pci_probe, .remove = hp100_pci_remove, }; -#endif /* * module section @@ -3032,23 +3024,17 @@ static int __init hp100_module_init(void) err = hp100_isa_init(); if (err && err != -ENODEV) goto out; -#ifdef CONFIG_EISA err = eisa_driver_register(&hp100_eisa_driver); if (err && err != -ENODEV) goto out2; -#endif -#ifdef CONFIG_PCI err = pci_register_driver(&hp100_pci_driver); if (err && err != -ENODEV) goto out3; -#endif out: return err; out3: -#ifdef CONFIG_EISA eisa_driver_unregister (&hp100_eisa_driver); out2: -#endif hp100_isa_cleanup(); goto out; } @@ -3057,12 +3043,8 @@ static int __init hp100_module_init(void) static void __exit hp100_module_exit(void) { hp100_isa_cleanup(); -#ifdef CONFIG_EISA eisa_driver_unregister (&hp100_eisa_driver); -#endif -#ifdef CONFIG_PCI pci_unregister_driver (&hp100_pci_driver); -#endif } module_init(hp100_module_init) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 50d5604833ed..e0993eba5df3 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -2223,8 +2223,6 @@ static irqreturn_t vxge_isr_napi(int irq, void *dev_id) return IRQ_NONE; } -#ifdef CONFIG_PCI_MSI - static irqreturn_t vxge_tx_msix_handle(int irq, void *dev_id) { struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; @@ -2442,16 +2440,13 @@ static void vxge_rem_msix_isr(struct vxgedev *vdev) if (vdev->config.intr_type == MSI_X) pci_disable_msix(vdev->pdev); } -#endif static void vxge_rem_isr(struct vxgedev *vdev) { -#ifdef CONFIG_PCI_MSI - if (vdev->config.intr_type == MSI_X) { + if (IS_ENABLED(CONFIG_PCI_MSI) && + vdev->config.intr_type == MSI_X) { vxge_rem_msix_isr(vdev); - } else -#endif - if (vdev->config.intr_type == INTA) { + } else if (vdev->config.intr_type == INTA) { synchronize_irq(vdev->pdev->irq); free_irq(vdev->pdev->irq, vdev); } @@ -2460,11 +2455,10 @@ static void vxge_rem_isr(struct vxgedev *vdev) static int vxge_add_isr(struct vxgedev *vdev) { int ret = 0; -#ifdef CONFIG_PCI_MSI int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; int pci_fun = PCI_FUNC(vdev->pdev->devfn); - if (vdev->config.intr_type == MSI_X) + if (IS_ENABLED(CONFIG_PCI_MSI) && vdev->config.intr_type == MSI_X) ret = vxge_enable_msix(vdev); if (ret) { @@ -2475,7 +2469,7 @@ static int vxge_add_isr(struct vxgedev *vdev) vdev->config.intr_type = INTA; } - if (vdev->config.intr_type == MSI_X) { + if (IS_ENABLED(CONFIG_PCI_MSI) && vdev->config.intr_type == MSI_X) { for (intr_idx = 0; intr_idx < (vdev->no_of_vpath * VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { @@ -2576,9 +2570,8 @@ static int vxge_add_isr(struct vxgedev *vdev) vdev->vxge_entries[intr_cnt].in_use = 1; vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0]; } -INTA_MODE: -#endif +INTA_MODE: if (vdev->config.intr_type == INTA) { snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge:INTA", vdev->ndev->name); @@ -3889,12 +3882,12 @@ static void vxge_device_config_init(struct vxge_hw_device_config *device_config, if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; -#ifndef CONFIG_PCI_MSI - vxge_debug_init(VXGE_ERR, - "%s: This Kernel does not support " - "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); - *intr_type = INTA; -#endif + if (!IS_ENABLED(CONFIG_PCI_MSI)) { + vxge_debug_init(VXGE_ERR, + "%s: This Kernel does not support " + "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); + *intr_type = INTA; + } /* Configure whether MSI-X or IRQL. */ switch (*intr_type) { diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 657b65bf5cac..18bf3a8fdc50 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -82,7 +82,7 @@ struct cpdma_desc { struct cpdma_desc_pool { phys_addr_t phys; - u32 hw_addr; + dma_addr_t hw_addr; void __iomem *iomap; /* ioremap map */ void *cpumap; /* dma_alloc map */ int desc_size, mem_size; @@ -152,7 +152,7 @@ struct cpdma_chan { * abstract out these details */ static struct cpdma_desc_pool * -cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr, +cpdma_desc_pool_create(struct device *dev, u32 phys, dma_addr_t hw_addr, int size, int align) { int bitmap_size; @@ -176,13 +176,13 @@ cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr, if (phys) { pool->phys = phys; - pool->iomap = ioremap(phys, size); + pool->iomap = ioremap(phys, size); /* should be memremap? */ pool->hw_addr = hw_addr; } else { - pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, + pool->cpumap = dma_alloc_coherent(dev, size, &pool->hw_addr, GFP_KERNEL); - pool->iomap = pool->cpumap; - pool->hw_addr = pool->phys; + pool->iomap = (void __iomem __force *)pool->cpumap; + pool->phys = pool->hw_addr; /* assumes no IOMMU, don't use this value */ } if (pool->iomap)