rtc: ds1307: add frequency_test_enable attribute on m41txx
On m41txx you can enable open-drain OUT pin to check if offset is ok. Enabling OUT pin with frequency_test_enable attribute, OUT pin will tick 512 times faster than 1s tick base. Enable or Disable FT bit on CONTROL register if freq_test is 1 or 0. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
parent
79230ff641
commit
b41c23e152
|
@ -1050,6 +1050,94 @@ static int m41txx_rtc_set_offset(struct device *dev, long offset)
|
|||
ctrl_reg);
|
||||
}
|
||||
|
||||
static ssize_t frequency_test_enable_store(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct ds1307 *ds1307 = dev_get_drvdata(dev);
|
||||
bool freq_test_en;
|
||||
int ret;
|
||||
|
||||
ret = kstrtobool(buf, &freq_test_en);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to store RTC Frequency Test attribute\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL, M41TXX_BIT_FT,
|
||||
freq_test_en ? M41TXX_BIT_FT : 0);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t frequency_test_enable_show(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct ds1307 *ds1307 = dev_get_drvdata(dev);
|
||||
unsigned int ctrl_reg;
|
||||
|
||||
regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
|
||||
|
||||
return scnprintf(buf, PAGE_SIZE, (ctrl_reg & M41TXX_BIT_FT) ? "on\n" :
|
||||
"off\n");
|
||||
}
|
||||
|
||||
static DEVICE_ATTR_RW(frequency_test_enable);
|
||||
|
||||
static struct attribute *rtc_freq_test_attrs[] = {
|
||||
&dev_attr_frequency_test_enable.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group rtc_freq_test_attr_group = {
|
||||
.attrs = rtc_freq_test_attrs,
|
||||
};
|
||||
|
||||
static void rtc_calib_remove_sysfs_group(void *_dev)
|
||||
{
|
||||
struct device *dev = _dev;
|
||||
|
||||
sysfs_remove_group(&dev->kobj, &rtc_freq_test_attr_group);
|
||||
}
|
||||
|
||||
static int ds1307_add_frequency_test(struct ds1307 *ds1307)
|
||||
{
|
||||
int err;
|
||||
|
||||
switch (ds1307->type) {
|
||||
case m41t0:
|
||||
case m41t00:
|
||||
case m41t11:
|
||||
/* Export sysfs entries */
|
||||
err = sysfs_create_group(&(ds1307->dev)->kobj,
|
||||
&rtc_freq_test_attr_group);
|
||||
if (err) {
|
||||
dev_err(ds1307->dev,
|
||||
"Failed to create sysfs group: %d\n",
|
||||
err);
|
||||
return err;
|
||||
}
|
||||
|
||||
err = devm_add_action_or_reset(ds1307->dev,
|
||||
rtc_calib_remove_sysfs_group,
|
||||
ds1307->dev);
|
||||
if (err) {
|
||||
dev_err(ds1307->dev,
|
||||
"Failed to add sysfs cleanup action: %d\n",
|
||||
err);
|
||||
sysfs_remove_group(&(ds1307->dev)->kobj,
|
||||
&rtc_freq_test_attr_group);
|
||||
return err;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
|
||||
|
@ -1792,6 +1880,10 @@ static int ds1307_probe(struct i2c_client *client,
|
|||
if (err)
|
||||
return err;
|
||||
|
||||
err = ds1307_add_frequency_test(ds1307);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (chip->nvram_size) {
|
||||
struct nvmem_config nvmem_cfg = {
|
||||
.name = "ds1307_nvram",
|
||||
|
|
Loading…
Reference in New Issue