DaVinci Device-Tree updates for v4.19
------------------------------------- * DA850 now uses clocks from device-tree * DA850 EVM gains LCD (with backlight) and SATA support * Lego Mindstorms gains bluetooth support * DSP reset control support on DA850 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJbRL2rAAoJEGFBu2jqvgRNYSUP/RXpXAArj3/XMQRAvz3lb0aI sdUaxKXBMG1O0EGjPhg34KLltPvGFdMcr6+nVFO4Twjwd7Cbuv1XLny1lqEuRJrO tnx01nl1dQw4vcn1RQGCyy74UZ+NPRF622sCSKwpLEQuTR51jOM6RE4CHUIjWe5Q +ViG15C1eyzGiNxyv7aEEgPxcUPw00CG5wwOgerbVWTOTZ4yXfHoDX1w1EJ57Hat pYIjyNnr549sO4QY6Lx9mjZNE30bgOQc8Nc2LoP0JXmdzTZFPxLVLZbJ1r8X4k9e 4EFa9r/iuacT9pvDKkuPbPTfk2y2LVI5PM14TIHtsD3hSTu37BmF3idsTMjDoMr5 T4oux+pWrxXD3bDA0JpLBglM3saxdl5pD1zxWv1oUUa5s/mi+B2HJ9pnbTEROal/ bQUn2V5j0X7iOUTi3SQMjUg32cykk+tbjyhO+j9lxMcI7p6Y29jd566idsEQVzF/ dgKzggCQMIdRaLPQff+VKoZwMNWf9c0HgzQiTqr4M8ym7vehK1aZAJ6SOieeq+i4 51fd54Al8CCIRbcrK9IFNVhfNK+tcgr5PVARvFWbcnqWot6r2itPey1p5AbAH1qh 8BLnZisA2Ttmvess1YFYmsCDXXEtmEDkPVyGj+j5vBN4s11kLnwyW6fgWhlJi8JF 6eAplVTOU1iNU2ZVbJA3 =6E7c -----END PGP SIGNATURE----- Merge tag 'davinci-for-v4.19/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt DaVinci Device-Tree updates for v4.19 ------------------------------------- * DA850 now uses clocks from device-tree * DA850 EVM gains LCD (with backlight) and SATA support * Lego Mindstorms gains bluetooth support * DSP reset control support on DA850 * tag 'davinci-for-v4.19/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: Add power-domains to CPPI 4.1 node ARM: davinci: dts: add a reset control to the dsp node ARM: davinci: dts: make psc0 a reset provider ARM: dts: da850-lego-ev3: Add Bluetooth nodes ARM: dts: da850: Add power-domains to PWM nodes ARM: dts: da850: Add clocks dt-bindings: timer: new bindings for TI DaVinci timer ARM: dts: da850-evm: Enable LCD and backlight ARM: dts: da850-evm: Enable SATA port Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
b7b6be6435
|
|
@ -0,0 +1,37 @@
|
|||
* Device tree bindings for Texas Instruments DaVinci timer
|
||||
|
||||
This document provides bindings for the 64-bit timer in the DaVinci
|
||||
architecture devices. The timer can be configured as a general-purpose 64-bit
|
||||
timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
|
||||
timers, each half can operate in conjunction (chain mode) or independently
|
||||
(unchained mode) of each other.
|
||||
|
||||
The timer is a free running up-counter and can generate interrupts when the
|
||||
counter reaches preset counter values.
|
||||
|
||||
Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
|
||||
watchdog timers.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "ti,da830-timer".
|
||||
- reg : specifies base physical address and count of the registers.
|
||||
- interrupts : interrupts generated by the timer.
|
||||
- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
|
||||
"cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
|
||||
"cmpint7" ("cmpintX" may be omitted if not present in the
|
||||
hardware).
|
||||
- clocks : the clock feeding the timer clock.
|
||||
|
||||
Example:
|
||||
|
||||
clocksource: timer@20000 {
|
||||
compatible = "ti,da830-timer";
|
||||
reg = <0x20000 0x1000>;
|
||||
interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
|
||||
<80>, <81>;
|
||||
interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
|
||||
"cmpint2", "cmpint3", "cmpint4", "cmpint5",
|
||||
"cmpint6", "cmpint7";
|
||||
clocks = <&pll0_auxclk>;
|
||||
};
|
||||
|
|
@ -35,6 +35,10 @@ eth0: ethernet@220000 {
|
|||
};
|
||||
};
|
||||
|
||||
&ref_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&edma0 {
|
||||
ti,edma-reserved-slot-ranges = <32 50>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -27,6 +27,65 @@ aliases {
|
|||
spi0 = &spi1;
|
||||
};
|
||||
|
||||
backlight: backlight-pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ecap2_pins>;
|
||||
power-supply = <&backlight_lcd>;
|
||||
compatible = "pwm-backlight";
|
||||
/*
|
||||
* The PWM here corresponds to production hardware. The
|
||||
* schematic needs to be 1015171 (15 March 2010), Rev A
|
||||
* or newer.
|
||||
*/
|
||||
pwms = <&ecap2 0 50000 0>;
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
|
||||
default-brightness-level = <7>;
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "ti,tilcdc,panel";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_pins>;
|
||||
/*
|
||||
* The vpif and the LCD are mutually exclusive.
|
||||
* To enable VPIF, change the status below to 'disabled' then
|
||||
* then change the status of the vpif below to 'okay'
|
||||
*/
|
||||
status = "okay";
|
||||
enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
|
||||
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
ac-bias-intrpt = <0>;
|
||||
dma-burst-sz = <16>;
|
||||
bpp = <16>;
|
||||
fdd = <0x80>;
|
||||
sync-edge = <0>;
|
||||
sync-ctrl = <1>;
|
||||
raster-order = <0>;
|
||||
fifo-th = <0>;
|
||||
};
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 480x272 {
|
||||
clock-frequency = <9000000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hfront-porch = <3>;
|
||||
hback-porch = <2>;
|
||||
hsync-len = <42>;
|
||||
vback-porch = <3>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <11>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
|
|
@ -35,6 +94,15 @@ vbat: fixedregulator0 {
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
backlight_lcd: backlight-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_backlight_pwr";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "DA850/OMAP-L138 EVM";
|
||||
|
|
@ -63,6 +131,14 @@ link0_codec: simple-audio-card,codec {
|
|||
};
|
||||
};
|
||||
|
||||
&ecap2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ref_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&pmx_core {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -93,6 +169,10 @@ nand_pins: nand_pins {
|
|||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -109,6 +189,10 @@ &rtc0 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
|
@ -336,5 +420,10 @@ &usb1 {
|
|||
&vpif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
|
||||
status = "okay";
|
||||
/*
|
||||
* The vpif and the LCD are mutually exclusive.
|
||||
* To enable VPIF, disable the ti,tilcdc,panel then
|
||||
* change the status below to 'okay'
|
||||
*/
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -123,6 +123,10 @@ vga_con_in: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
&ref_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&pmx_core {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -175,6 +179,11 @@ &gpio {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sata_refclk {
|
||||
status = "okay";
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -173,6 +173,15 @@ battery {
|
|||
rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
bt_slow_clk: bt-clock {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&ecap2 0 30518 0>;
|
||||
};
|
||||
|
||||
/* ARM local RAM */
|
||||
memory@ffff0000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
|
|
@ -191,6 +200,10 @@ reboot-mode {
|
|||
};
|
||||
};
|
||||
|
||||
&ref_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&pmx_core {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -212,6 +225,20 @@ disable {
|
|||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
bt_clock_bias: bt-clock-bias-groups {
|
||||
disable {
|
||||
groups = "cp2";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
bt_pic_bias: bt-pic-bias-groups {
|
||||
disable {
|
||||
groups = "cp20";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Input port 1 */
|
||||
|
|
@ -221,6 +248,22 @@ &serial1 {
|
|||
pinctrl-0 = <&serial1_rxtx_pins>;
|
||||
};
|
||||
|
||||
&serial2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "ti,cc2560";
|
||||
clocks = <&bt_slow_clk>;
|
||||
clock-names = "ext_clock";
|
||||
enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
nvmem-cells = <&bdaddr>;
|
||||
nvmem-cell-names = "bd-address";
|
||||
};
|
||||
};
|
||||
|
||||
&rtc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -239,6 +282,12 @@ eeprom@50 {
|
|||
pagesize = <64>;
|
||||
read-only;
|
||||
reg = <0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
bdaddr: bdaddr@3f06 {
|
||||
reg = <0x3f06 0x06>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -323,6 +372,10 @@ display@0{
|
|||
};
|
||||
};
|
||||
|
||||
&ecap2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehrpwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -336,6 +389,39 @@ batt_volt_en {
|
|||
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
/* Don't impede Bluetooth clock signal */
|
||||
bt_clock_en {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
};
|
||||
|
||||
/*
|
||||
* There is a PIC microcontroller for interfacing with an Apple MFi
|
||||
* chip. This interferes with normal Bluetooth operation, so we need
|
||||
* to make sure it is turned off. Note: The publicly available
|
||||
* schematics from LEGO don't show that these pins are connected to
|
||||
* anything, but they are present in the source code from LEGO.
|
||||
*/
|
||||
|
||||
bt_pic_en {
|
||||
gpio-hog;
|
||||
gpios = <51 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
bt_pic_rst {
|
||||
gpio-hog;
|
||||
gpios = <78 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
bt_pic_cts {
|
||||
gpio-hog;
|
||||
gpios = <87 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
|
|
|
|||
|
|
@ -32,6 +32,25 @@ intc: interrupt-controller@fffee000 {
|
|||
reg = <0xfffee000 0x2000>;
|
||||
};
|
||||
};
|
||||
clocks: clocks {
|
||||
ref_clk: ref_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "ref_clk";
|
||||
};
|
||||
sata_refclk: sata_refclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "sata_refclk";
|
||||
status = "disabled";
|
||||
};
|
||||
usb_refclkin: usb_refclkin {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "usb_refclkin";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
dsp: dsp@11800000 {
|
||||
compatible = "ti,da850-dsp";
|
||||
reg = <0x11800000 0x40000>,
|
||||
|
|
@ -42,6 +61,8 @@ dsp: dsp@11800000 {
|
|||
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <28>;
|
||||
clocks = <&psc0 15>;
|
||||
resets = <&psc0 15>;
|
||||
status = "disabled";
|
||||
};
|
||||
soc@1c00000 {
|
||||
|
|
@ -52,6 +73,38 @@ soc@1c00000 {
|
|||
ranges = <0x0 0x01c00000 0x400000>;
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
psc0: clock-controller@10000 {
|
||||
compatible = "ti,da850-psc0";
|
||||
reg = <0x10000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
|
||||
<&pll0_sysclk 4>, <&pll0_sysclk 6>,
|
||||
<&async1_clk>;
|
||||
clock-names = "pll0_sysclk1", "pll0_sysclk2",
|
||||
"pll0_sysclk4", "pll0_sysclk6",
|
||||
"async1";
|
||||
};
|
||||
pll0: clock-controller@11000 {
|
||||
compatible = "ti,da850-pll0";
|
||||
reg = <0x11000 0x1000>;
|
||||
clocks = <&ref_clk>, <&pll1_sysclk 3>;
|
||||
clock-names = "clksrc", "extclksrc";
|
||||
|
||||
pll0_pllout: pllout {
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
pll0_sysclk: sysclk {
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
pll0_auxclk: auxclk {
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
pll0_obsclk: obsclk {
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
pmx_core: pinmux@14120 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x14120 0x50>;
|
||||
|
|
@ -281,8 +334,41 @@ cfgchip: chip-controller@1417c {
|
|||
usb_phy: usb-phy {
|
||||
compatible = "ti,da830-usb-phy";
|
||||
#phy-cells = <1>;
|
||||
clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
|
||||
clock-names = "usb0_clk48", "usb1_clk48";
|
||||
status = "disabled";
|
||||
};
|
||||
usb_phy_clk: usb-phy-clocks {
|
||||
compatible = "ti,da830-usb-phy-clocks";
|
||||
#clock-cells = <1>;
|
||||
clocks = <&psc1 1>, <&usb_refclkin>,
|
||||
<&pll0_auxclk>;
|
||||
clock-names = "fck", "usb_refclkin", "auxclk";
|
||||
};
|
||||
ehrpwm_tbclk: ehrpwm_tbclk {
|
||||
compatible = "ti,da830-tbclksync";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&psc1 17>;
|
||||
clock-names = "fck";
|
||||
};
|
||||
div4p5_clk: div4.5 {
|
||||
compatible = "ti,da830-div4p5ena";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&pll0_pllout>;
|
||||
clock-names = "pll0_pllout";
|
||||
};
|
||||
async1_clk: async1 {
|
||||
compatible = "ti,da850-async1-clksrc";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
|
||||
clock-names = "pll0_sysclk3", "div4.5";
|
||||
};
|
||||
async3_clk: async3 {
|
||||
compatible = "ti,da850-async3-clksrc";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
|
||||
clock-names = "pll0_sysclk2", "pll1_sysclk2";
|
||||
};
|
||||
};
|
||||
edma0: edma@0 {
|
||||
compatible = "ti,edma3-tpcc";
|
||||
|
|
@ -294,18 +380,21 @@ edma0: edma@0 {
|
|||
#dma-cells = <2>;
|
||||
|
||||
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
|
||||
power-domains = <&psc0 0>;
|
||||
};
|
||||
edma0_tptc0: tptc@8000 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
reg = <0x8000 0x400>;
|
||||
interrupts = <13>;
|
||||
interrupt-names = "edm3_tcerrint";
|
||||
power-domains = <&psc0 1>;
|
||||
};
|
||||
edma0_tptc1: tptc@8400 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
reg = <0x8400 0x400>;
|
||||
interrupts = <32>;
|
||||
interrupt-names = "edm3_tcerrint";
|
||||
power-domains = <&psc0 2>;
|
||||
};
|
||||
edma1: edma@230000 {
|
||||
compatible = "ti,edma3-tpcc";
|
||||
|
|
@ -317,12 +406,14 @@ edma1: edma@230000 {
|
|||
#dma-cells = <2>;
|
||||
|
||||
ti,tptcs = <&edma1_tptc0 7>;
|
||||
power-domains = <&psc1 0>;
|
||||
};
|
||||
edma1_tptc0: tptc@238000 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
reg = <0x238000 0x400>;
|
||||
interrupts = <95>;
|
||||
interrupt-names = "edm3_tcerrint";
|
||||
power-domains = <&psc1 21>;
|
||||
};
|
||||
serial0: serial@42000 {
|
||||
compatible = "ti,da830-uart", "ns16550a";
|
||||
|
|
@ -330,6 +421,8 @@ serial0: serial@42000 {
|
|||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <25>;
|
||||
clocks = <&psc0 9>;
|
||||
power-domains = <&psc0 9>;
|
||||
status = "disabled";
|
||||
};
|
||||
serial1: serial@10c000 {
|
||||
|
|
@ -338,6 +431,8 @@ serial1: serial@10c000 {
|
|||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <53>;
|
||||
clocks = <&psc1 12>;
|
||||
power-domains = <&psc1 12>;
|
||||
status = "disabled";
|
||||
};
|
||||
serial2: serial@10d000 {
|
||||
|
|
@ -346,6 +441,8 @@ serial2: serial@10d000 {
|
|||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <61>;
|
||||
clocks = <&psc1 13>;
|
||||
power-domains = <&psc1 13>;
|
||||
status = "disabled";
|
||||
};
|
||||
rtc0: rtc@23000 {
|
||||
|
|
@ -353,6 +450,8 @@ rtc0: rtc@23000 {
|
|||
reg = <0x23000 0x1000>;
|
||||
interrupts = <19
|
||||
19>;
|
||||
clocks = <&pll0_auxclk>;
|
||||
clock-names = "int-clk";
|
||||
status = "disabled";
|
||||
};
|
||||
i2c0: i2c@22000 {
|
||||
|
|
@ -361,6 +460,7 @@ i2c0: i2c@22000 {
|
|||
interrupts = <15>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&pll0_auxclk>;
|
||||
status = "disabled";
|
||||
};
|
||||
i2c1: i2c@228000 {
|
||||
|
|
@ -369,11 +469,21 @@ i2c1: i2c@228000 {
|
|||
interrupts = <51>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&psc1 11>;
|
||||
power-domains = <&psc1 11>;
|
||||
status = "disabled";
|
||||
};
|
||||
clocksource: timer@20000 {
|
||||
compatible = "ti,da830-timer";
|
||||
reg = <0x20000 0x1000>;
|
||||
interrupts = <12>, <13>;
|
||||
interrupt-names = "tint12", "tint34";
|
||||
clocks = <&pll0_auxclk>;
|
||||
};
|
||||
wdt: wdt@21000 {
|
||||
compatible = "ti,davinci-wdt";
|
||||
reg = <0x21000 0x1000>;
|
||||
clocks = <&pll0_auxclk>;
|
||||
status = "disabled";
|
||||
};
|
||||
mmc0: mmc@40000 {
|
||||
|
|
@ -384,12 +494,14 @@ mmc0: mmc@40000 {
|
|||
interrupts = <16>;
|
||||
dmas = <&edma0 16 0>, <&edma0 17 0>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&psc0 5>;
|
||||
status = "disabled";
|
||||
};
|
||||
vpif: video@217000 {
|
||||
compatible = "ti,da850-vpif";
|
||||
reg = <0x217000 0x1000>;
|
||||
interrupts = <92>;
|
||||
power-domains = <&psc1 9>;
|
||||
status = "disabled";
|
||||
|
||||
/* VPIF capture port */
|
||||
|
|
@ -412,6 +524,7 @@ mmc1: mmc@21b000 {
|
|||
interrupts = <72>;
|
||||
dmas = <&edma1 28 0>, <&edma1 29 0>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&psc1 18>;
|
||||
status = "disabled";
|
||||
};
|
||||
ehrpwm0: pwm@300000 {
|
||||
|
|
@ -419,6 +532,9 @@ ehrpwm0: pwm@300000 {
|
|||
"ti,am33xx-ehrpwm";
|
||||
#pwm-cells = <3>;
|
||||
reg = <0x300000 0x2000>;
|
||||
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
|
||||
clock-names = "fck", "tbclk";
|
||||
power-domains = <&psc1 17>;
|
||||
status = "disabled";
|
||||
};
|
||||
ehrpwm1: pwm@302000 {
|
||||
|
|
@ -426,6 +542,9 @@ ehrpwm1: pwm@302000 {
|
|||
"ti,am33xx-ehrpwm";
|
||||
#pwm-cells = <3>;
|
||||
reg = <0x302000 0x2000>;
|
||||
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
|
||||
clock-names = "fck", "tbclk";
|
||||
power-domains = <&psc1 17>;
|
||||
status = "disabled";
|
||||
};
|
||||
ecap0: ecap@306000 {
|
||||
|
|
@ -433,6 +552,9 @@ ecap0: ecap@306000 {
|
|||
"ti,am33xx-ecap";
|
||||
#pwm-cells = <3>;
|
||||
reg = <0x306000 0x80>;
|
||||
clocks = <&psc1 20>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&psc1 20>;
|
||||
status = "disabled";
|
||||
};
|
||||
ecap1: ecap@307000 {
|
||||
|
|
@ -440,6 +562,9 @@ ecap1: ecap@307000 {
|
|||
"ti,am33xx-ecap";
|
||||
#pwm-cells = <3>;
|
||||
reg = <0x307000 0x80>;
|
||||
clocks = <&psc1 20>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&psc1 20>;
|
||||
status = "disabled";
|
||||
};
|
||||
ecap2: ecap@308000 {
|
||||
|
|
@ -447,6 +572,9 @@ ecap2: ecap@308000 {
|
|||
"ti,am33xx-ecap";
|
||||
#pwm-cells = <3>;
|
||||
reg = <0x308000 0x80>;
|
||||
clocks = <&psc1 20>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&psc1 20>;
|
||||
status = "disabled";
|
||||
};
|
||||
spi0: spi@41000 {
|
||||
|
|
@ -459,6 +587,8 @@ spi0: spi@41000 {
|
|||
interrupts = <20>;
|
||||
dmas = <&edma0 14 0>, <&edma0 15 0>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&psc0 4>;
|
||||
power-domains = <&psc0 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
spi1: spi@30e000 {
|
||||
|
|
@ -471,6 +601,8 @@ spi1: spi@30e000 {
|
|||
interrupts = <56>;
|
||||
dmas = <&edma0 18 0>, <&edma0 19 0>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&psc1 10>;
|
||||
power-domains = <&psc1 10>;
|
||||
status = "disabled";
|
||||
};
|
||||
usb0: usb@200000 {
|
||||
|
|
@ -482,6 +614,8 @@ usb0: usb@200000 {
|
|||
dr_mode = "otg";
|
||||
phys = <&usb_phy 0>;
|
||||
phy-names = "usb-phy";
|
||||
clocks = <&psc1 1>;
|
||||
clock-ranges;
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <1>;
|
||||
|
|
@ -505,6 +639,7 @@ cppi41dma: dma-controller@201000 {
|
|||
interrupts = <58>;
|
||||
#dma-cells = <2>;
|
||||
#dma-channels = <4>;
|
||||
power-domains = <&psc1 1>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -512,13 +647,31 @@ sata: sata@218000 {
|
|||
compatible = "ti,da850-ahci";
|
||||
reg = <0x218000 0x2000>, <0x22c018 0x4>;
|
||||
interrupts = <67>;
|
||||
clocks = <&psc1 8>, <&sata_refclk>;
|
||||
clock-names = "fck", "refclk";
|
||||
status = "disabled";
|
||||
};
|
||||
pll1: clock-controller@21a000 {
|
||||
compatible = "ti,da850-pll1";
|
||||
reg = <0x21a000 0x1000>;
|
||||
clocks = <&ref_clk>;
|
||||
clock-names = "clksrc";
|
||||
|
||||
pll1_sysclk: sysclk {
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
pll1_obsclk: obsclk {
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
mdio: mdio@224000 {
|
||||
compatible = "ti,davinci_mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x224000 0x1000>;
|
||||
clocks = <&psc1 5>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&psc1 5>;
|
||||
status = "disabled";
|
||||
};
|
||||
eth0: ethernet@220000 {
|
||||
|
|
@ -534,6 +687,8 @@ eth0: ethernet@220000 {
|
|||
35
|
||||
36
|
||||
>;
|
||||
clocks = <&psc1 5>;
|
||||
power-domains = <&psc1 5>;
|
||||
status = "disabled";
|
||||
};
|
||||
usb1: usb@225000 {
|
||||
|
|
@ -542,6 +697,7 @@ usb1: usb@225000 {
|
|||
interrupts = <59>;
|
||||
phys = <&usb_phy 1>;
|
||||
phy-names = "usb-phy";
|
||||
clocks = <&psc1 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
gpio: gpio@226000 {
|
||||
|
|
@ -552,6 +708,8 @@ gpio: gpio@226000 {
|
|||
interrupts = <42 43 44 45 46 47 48 49 50>;
|
||||
ti,ngpio = <144>;
|
||||
ti,davinci-gpio-unbanked = <0>;
|
||||
clocks = <&psc1 3>;
|
||||
clock-names = "gpio";
|
||||
status = "disabled";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
@ -700,6 +858,17 @@ gpio: gpio@226000 {
|
|||
<&pmx_core 142 147 1>,
|
||||
<&pmx_core 143 146 1>;
|
||||
};
|
||||
psc1: clock-controller@227000 {
|
||||
compatible = "ti,da850-psc1";
|
||||
reg = <0x227000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
|
||||
<&async3_clk>;
|
||||
clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
|
||||
assigned-clocks = <&async3_clk>;
|
||||
assigned-clock-parents = <&pll1_sysclk 2>;
|
||||
};
|
||||
pinconf: pin-controller@22c00c {
|
||||
compatible = "ti,da850-pupd";
|
||||
reg = <0x22c00c 0x8>;
|
||||
|
|
@ -713,6 +882,7 @@ mcasp0: mcasp@100000 {
|
|||
reg-names = "mpu", "dat";
|
||||
interrupts = <54>;
|
||||
interrupt-names = "common";
|
||||
power-domains = <&psc1 7>;
|
||||
status = "disabled";
|
||||
dmas = <&edma0 1 1>,
|
||||
<&edma0 0 1>;
|
||||
|
|
@ -724,6 +894,9 @@ lcdc: display@213000 {
|
|||
reg = <0x213000 0x1000>;
|
||||
interrupts = <52>;
|
||||
max-pixelclock = <37500>;
|
||||
clocks = <&psc1 16>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&psc1 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
@ -735,6 +908,9 @@ aemif: aemif@68000000 {
|
|||
reg = <0x68000000 0x00008000>;
|
||||
ranges = <0 0 0x60000000 0x08000000
|
||||
1 0 0x68000000 0x00008000>;
|
||||
clocks = <&psc0 3>;
|
||||
clock-names = "aemif";
|
||||
clock-ranges;
|
||||
status = "disabled";
|
||||
};
|
||||
memctrl: memory-controller@b0000000 {
|
||||
|
|
|
|||
Loading…
Reference in New Issue