X-Gene DTS changes queued for v4.4

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV+0vrAAoJEB11UG/BVQ/g2bEP/RCrmy3VyDQJgt3aTvoPKjJN
 x0cIJOeEwA7YXhQB7l0w7d71v2aHvbOY3FzOddKJisCFlDuu5RfmQXL8BOO6YBbU
 wRe94U4M32zjb9AbyOdLVEuonMjFr1lbxGNVaSKRYm/39qW7Knd6KXx/EGw8AIUR
 Oz1SjM9qCVp/dXq4tfhbGZa7ZT/k2J8933vYm0mEwqcflkp02017InWMZuwAzshW
 8hDeFo5MWcIxRgY6fMpgY4LRXlTachbQtz+SGyfO8z//AuepgCSDen2iBsewQVyN
 OP4BYgvEIU3a7RNpi/frYNS25OJ6MlFmMUKMtnKJVJDC9mF1rmDYzPnZrCU/a9lW
 ca7FIl88HxzXrymlS1FhQJt2MI4eDryB1oeeFcx2J6avnqDEE5pd3Wym1YG9cu4S
 C6/6NtJeyEQMbo1zooyV4zO2cNDvGD9wd5zUlnNi/Ye4UPxJbGd7w7ZpFItNNWnU
 Q01QCt2Nn2BFStiMZPUvpP1Jp+c2huAc3FmjcCqMLOL/HXkSBB8pu0ILY148dOdu
 +hJdthoDF9jilNM7V9JkSb9belMtbyvtK2wQQpCR24TQzbpTy8GHLX9OcEjkP9E8
 2Z3pbqDMjQ1yGrHWPwZBrWXa0a+LCmNDWbgqB/xYNVgCyMq9XimawbQpLnLTDG9R
 mireHhD8xc3+QwfC9MJ1
 =IW/G
 -----END PGP SIGNATURE-----

Merge tag 'xgene-dts-for-v4.4-1' of https://github.com/AppliedMicro/xgene-next into next/dt

Merge "X-Gene DTS changes queued for v4.4" from Duc Dang:

* tag 'xgene-dts-for-v4.4-1' of https://github.com/AppliedMicro/xgene-next:
  arm64: dts: Add poweroff device nodes for APM X-Gene 2 platform
  arm64: dts: Add APM X-Gene 2 standby GPIO controller DTS entries
  arm64: dts: Add PMU node for APM X-Gene Storm SOC
  Documentation: arm: pmu: Add Potenza PMU binding
  arm64: dts: Add X-Gene v2 reboot driver dts node
  arm64: dts: add APM Merlin Board device tree
  power: reset: Add syscon poweroff device node for APM X-Gene platform
  arm64: dts: Add X-Gene reboot driver dts node
  Documentation: arm64: add SCU dts binding documentation to linux kernel
  MAINTAINERS: Add Applied Micro (APM) X-Gene Device Tree maintainer

Documentation/devicetree/bindings/arm/apm/scu.txt

@@ -0,0 +1,17 @@
+APM X-GENE SoC series SCU Registers
+
+This system clock unit contain various register that control block resets,
+clock enable/disables, clock divisors and other deepsleep registers.
+
+Properties:
+ - compatible : should contain two values. First value must be:
+		   - "apm,xgene-scu"
+		second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+	scu: system-clk-controller@17000000 {
+		compatible = "apm,xgene-scu","syscon";
+		reg = <0x0 0x17000000 0x0 0x400>;
+	};

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"apm,potenza-pmu"
 	"arm,armv8-pmuv3"
 	"arm,cortex-a17-pmu"
 	"arm,cortex-a15-pmu"

MAINTAINERS

@@ -788,6 +788,11 @@ S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
+APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
+M:	Duc Dang <dhdang@apm.com>
+S:	Supported
+F:	arch/arm64/boot/dts/apm/
+
 APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
 M:	Iyappan Subramanian <isubramanian@apm.com>
 M:	Keyur Chudgar <kchudgar@apm.com>

arch/arm64/boot/dts/apm/Makefile

@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/apm/apm-merlin.dts

@@ -0,0 +1,72 @@
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+	model = "APM X-Gene Merlin board";
+	compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button@1 {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupts = <0x0 0x28 0x1>;
+		};
+	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+};
+
+&serial0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&sata2 {
+	status = "ok";
+};
+
+&sata3 {
+	status = "ok";
+};
+
+&sgenet0 {
+	status = "ok";
+};
+
+&xgenet1 {
+	status = "ok";
+};

arch/arm64/boot/dts/apm/apm-mustang.dts

@@ -33,6 +33,18 @@ button@1 {
 			interrupts = <0x0 0x2d 0x1>;
 		};
 	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
 };
 
 &pcie0clk {

arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

@@ -0,0 +1,271 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+	compatible = "apm,xgene-shadowcat";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+	};
+
+	gic: interrupt-controller@78090000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+		ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
+		      <0x0 0x780A0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780C0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780E0000 0x0 0x20000>;	/* GIC VCPU */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff04>,	/* Secure Phys IRQ */
+			     <1 13 0xff04>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff04>,	/* Virt IRQ */
+			     <1 15 0xff04>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			xge1clk: xge1clk@1f62c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f62c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge1clk";
+			};
+		};
+
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
+		serial0: serial@10600000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x10600000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f200000 0x0 0x1000>,
+			      <0x0 0x1f20d000 0x0 0x1000>,
+			      <0x0 0x1f20e000 0x0 0x1000>;
+			interrupts = <0x0 0x5a 0x4>;
+			dma-coherent;
+		};
+
+		sata2: sata@1a200000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a200000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>;
+			interrupts = <0x0 0x5b 0x4>;
+			dma-coherent;
+		};
+
+		sata3: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>;
+			interrupts = <0x0 0x5c 0x4>;
+			dma-coherent;
+		};
+
+		sbgpio: sbgpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <0x0 0x28 0x1>,
+				     <0x0 0x29 0x1>,
+				     <0x0 0x2a 0x1>,
+				     <0x0 0x2b 0x1>,
+				     <0x0 0x2c 0x1>,
+				     <0x0 0x2d 0x1>,
+				     <0x0 0x2e 0x1>,
+				     <0x0 0x2f 0x1>;
+		};
+
+		sgenet0: ethernet@1f610000 {
+			compatible = "apm,xgene2-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0x10000>,
+			      <0x0 0x1f600000 0x0 0Xd100>,
+			      <0x0 0x20000000 0x0 0X20000>;
+			interrupts = <0 96 4>,
+				     <0 97 4>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			local-mac-address = [00 01 73 00 00 01];
+			phy-connection-type = "sgmii";
+		};
+
+		xgenet1: ethernet@1f620000 {
+			compatible = "apm,xgene2-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f620000 0x0 0x10000>,
+			      <0x0 0x1f600000 0x0 0Xd100>,
+			      <0x0 0x20000000 0x0 0X220000>;
+			interrupts = <0 108 4>,
+				     <0 109 4>;
+			port-id = <1>;
+			dma-coherent;
+			clocks = <&xge1clk 0>;
+			local-mac-address = [00 01 73 00 00 02];
+			phy-connection-type = "xgmii";
+		};
+	};
+};

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -97,6 +97,11 @@ timer {
 		clock-frequency = <50000000>;
 	};
 
+	pmu {
+		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -396,6 +401,18 @@ msi: msi@79000000 {
 					0x0 0x1f 0x4>;
 		};
 
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
 		csw: csw@7e200000 {
 			compatible = "apm,xgene-csw", "syscon";
 			reg = <0x0 0x7e200000 0x0 0x1000>;