p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ARM: dts: enable ahci sata and sata phy for exynos5250 

This patch adds dt entry for ahci sata controller and its
corresponding phy controller.phy node has been added w.r.t
new generic phy framework.

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Yuvaraj Kumar C D 2014-03-18 07:49:14 +09:00 committed by Kukjin Kim
parent 183af2522d
commit ba0d7ed391
6 changed files with 98 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
View File

@ -1,14 +0,0 @@
* Samsung SATA PHY Controller
SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
Each SATA PHY controller should have its own node.
Required properties:
- compatible : compatible list, contains "samsung,exynos5-sata-phy"
- reg : <registers mapping>
Example:
sata@ffe07000 {
compatible = "samsung,exynos5-sata-phy";
reg = <0xffe07000 0x1000>;
};

25
Documentation/devicetree/bindings/ata/exynos-sata.txt
View File

@ -4,14 +4,21 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : compatible list, contains "samsung,exynos5-sata"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
- samsung,sata-freq : <frequency in MHz>
- compatible : compatible list, contains "samsung,exynos5-sata"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
- samsung,sata-freq : <frequency in MHz>
- phys : as mentioned in phy-bindings.txt
- phy-names : as mentioned in phy-bindings.txt
Example:
sata@ffe08000 {
compatible = "samsung,exynos5-sata";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
};
sata@122f0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122f0000 0x1ff>;
interrupts = <0 115 0>;
clocks = <&clock 277>, <&clock 143>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
phy-names = "sata-phy";
};

36
Documentation/devicetree/bindings/phy/samsung-phy.txt
View File

@ -20,3 +20,39 @@ Required properties:
- compatible : should be "samsung,exynos5250-dp-video-phy";
- reg : offset and length of the Display Port PHY register set;
- #phy-cells : from the generic PHY bindings, must be 0;
Samsung SATA PHY Controller
---------------------------
SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
Each SATA PHY controller should have its own node.
Required properties:
- compatible : compatible list, contains "samsung,exynos5250-sata-phy"
- reg : offset and length of the SATA PHY register set;
- #phy-cells : from the generic phy bindings;
Example:
sata_phy: sata-phy@12170000 {
compatible = "samsung,exynos5250-sata-phy";
reg = <0x12170000 0x1ff>;
clocks = <&clock 287>;
clock-names = "sata_phyctrl";
#phy-cells = <0>;
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
samsung,syscon-phandle = <&pmu_syscon>;
};
Device-Tree bindings for sataphy i2c client driver
--------------------------------------------------
Required properties:
compatible: Should be "samsung,exynos-sataphy-i2c"
- reg: I2C address of the sataphy i2c device.
Example:
sata_phy_i2c:sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};

21
arch/arm/boot/dts/exynos5250-arndale.dts
View File

@ -374,6 +374,27 @@ hdmiphy@38 {
};
};
i2c@121D0000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
sata_phy_i2c:sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
};
sata@122F0000 {
status = "okay";
};
sata-phy@12170000 {
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
mmc_0: mmc@12200000 {
status = "okay";
num-slots = <1>;

17
arch/arm/boot/dts/exynos5250-smdk5250.dts
View File

@ -242,16 +242,12 @@ i2c@121D0000 {
samsung,i2c-slave-addr = <0x38>;
status = "okay";
sata-phy {
compatible = "samsung,sata-phy";
sata_phy_i2c:sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
};
sata@122F0000 {
samsung,sata-freq = <66>;
};
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@ -274,6 +270,15 @@ hdmiphy@38 {
};
};
sata@122F0000 {
status = "okay";
};
sata-phy@12170000 {
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
mmc@12200000 {
status = "okay";
num-slots = <1>;

18
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -47,6 +47,7 @@ aliases {
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
i2c9 = &i2c_9;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
@ -235,16 +236,25 @@ serial@12C30000 {
};
sata@122F0000 {
compatible = "samsung,exynos5-sata-ahci";
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
phy-names = "sata-phy";
status = "disabled";
};
sata-phy@12170000 {
compatible = "samsung,exynos5-sata-phy";
sata_phy: sata-phy@12170000 {
compatible = "samsung,exynos5250-sata-phy";
reg = <0x12170000 0x1ff>;
clocks = <&clock 287>;
clock-names = "sata_phyctrl";
#phy-cells = <0>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
i2c_0: i2c@12C60000 {
@ -362,7 +372,7 @@ i2c_8: i2c@12CE0000 {
status = "disabled";
};
i2c@121D0000 {
i2c_9: i2c@121D0000 {
compatible = "samsung,exynos5-sata-phy-i2c";
reg = <0x121D0000 0x100>;
#address-cells = <1>;