p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

First set of IIO fixes for the 5.7 cycle. 

Includes one MAINTAINERS update to avoid people getting a lot of bounce
 messages and complaining about it.
 
 * MAINTAINERS
   - Drop Stefan Popa's Analog Devices email address in favour of
     Michael Hennerich.
 * core
   - Fix handling of dB sysfs inputs.
   - Drop a stray semi colon in macro definition.
 * ad5770r
   - Fix an off by one in chec on maximum number of channels.
 * ad7192
   - Fix a null pointer de-reference due to the name previously being
     retrieved from the spi_get_device_id call which no longer works as
     the relevant table was removed.
 * ad7797
   - Use correct attribute group.
 * counter/104-quad-8
   - Add locks to prevent some race conditions.
 * inv-mpu6050
   - Fix issues around suspend / resume clashing with runtime PM.
 * stm32-adc
   - Fix sleep in invalid context
   - Fix id relative path error in device tree binding doc.
 * st_lsm6dsx
   - Fix a read alignment issue on an untagged FIFO.
   - Handle odr for slave to properly compute the FIFO data layout / pattern.
   - Flush the HW FIFO before resettting the device to avoid a race on
     interrupt line 1.
 * st_sensors
   - Rely on ODR mask not ODR address to identify if the ODR can be set.
     Some devices have an ODR address of 0.
 * ti-ads8344
   - Byte ordering was wrong - fix it.
 * xilinx-xadc
   - Fix inverted logic in powering down the second ADC.
   - Fix clearing interrupt when enabling the trigger.
   - Fix configuration of sequencer when in simultaneous sampling mode.
   - Limit initial sampling rate as done for runtime configured ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6cgbkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj/qg//c1TF2fhXEuGNua2M9PzaO+UgEkymF5lD
 R9bQPOPLXesTxmIZDIPWuIYaoFOIBrB6Kc9DvE8+7apVc0I/JFYmuXSjY1LGoBj5
 6WSrbtfAHYD5HBY/ZQq92iw+feFlctWtpp7H6Ngy2c7lQy8OKMhrHOA1NgbC++HH
 5OA5uoMD7Fo0mvAGY7/74DiJFEKG/PUUrGWSbH792Mh0EmvXgyFkWyHEXCUrS6Qo
 gbaLk8mZsTac3iwYoLk7AdYyQpEdQD/tnCHpBzHHdTdDcQuKHbknP9t/zFuEkM/e
 hAH6H/cOr+IMOkMvYe1HDRQsOwkPQppz2GnxtWAUwCV8Shkn7khOExnV17zqUfJx
 NSzX60/iZWj53cAJkp4ZW4Uf6dqEEeCvV9jzWngXsCTRz96tpwJoLDilTEStSp1r
 0d17OpFSkrPoJQR6miK+wCeoA4CcLLfGJXG1BcDpsT0qgHq/TNx7P7AX55Ip//IL
 uu7qCDzFHAct8C50r1725pthsX/69PI34F8wHQ+bSt8eBlEMc/+iDavXO7MPvNNi
 Xd/Je0c+6pV15X9lCN7RqujDjBb2yMzX9f3Omq0txc4ughYGYb3QLwAfBidjW6Wy
 fI6AgBXOdqUOlFgq0ncDUVmS73AMfb2ilvstfY+cfhLrtGIzZNwin1znSIxcesaS
 tUGD9Xk/bPc=
 =SmJy
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group
This commit is contained in:
Greg Kroah-Hartman 2020-04-20 14:07:00 +02:00
parent ea81c34864 0f0459b810
commit c532cc617e
17 changed files with 400 additions and 111 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
View File

@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#"
$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: STMicroelectronics STM32 ADC bindings

15
MAINTAINERS
View File

@ -570,7 +570,7 @@ F: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
F: drivers/input/misc/adxl34x.c
ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@ -922,7 +922,7 @@ F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
F: drivers/net/ethernet/amd/xgbe/
ANALOG DEVICES INC AD5686 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@ -930,7 +930,7 @@ F: drivers/iio/dac/ad5686*
F: drivers/iio/dac/ad5696*
ANALOG DEVICES INC AD5758 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@ -946,7 +946,7 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
F: drivers/iio/adc/ad7091r5.c
ANALOG DEVICES INC AD7124 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@ -970,7 +970,7 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
F: drivers/iio/adc/ad7292.c
ANALOG DEVICES INC AD7606 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <Michael.Hennerich@analog.com>
M: Beniamin Bia <beniamin.bia@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
@ -979,7 +979,7 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
F: drivers/iio/adc/ad7606.c
ANALOG DEVICES INC AD7768-1 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@ -1040,7 +1040,7 @@ F: Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
F: drivers/hwmon/adm1177.c
ANALOG DEVICES INC ADP5061 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@ -1109,7 +1109,6 @@ F: drivers/iio/amplifiers/hmc425a.c
ANALOG DEVICES INC IIO DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
M: Michael Hennerich <Michael.Hennerich@analog.com>
M: Stefan Popa <stefan.popa@analog.com>
S: Supported
W: http://wiki.analog.com/
W: http://ez.analog.com/community/linux-device-drivers

194
drivers/counter/104-quad-8.c
View File

@ -44,6 +44,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
* @base: base port address of the IIO device
*/
struct quad8_iio {
struct mutex lock;
struct counter_device counter;
unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
unsigned int preset[QUAD8_NUM_COUNTERS];
@ -123,6 +124,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
/* Borrow XOR Carry effectively doubles count range */
*val = (borrow ^ carry) << 24;
mutex_lock(&priv->lock);
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@ -130,6 +133,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
for (i = 0; i < 3; i++)
*val |= (unsigned int)inb(base_offset) << (8 * i);
mutex_unlock(&priv->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
*val = priv->ab_enable[chan->channel];
@ -160,6 +165,8 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
if ((unsigned int)val > 0xFFFFFF)
return -EINVAL;
mutex_lock(&priv->lock);
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@ -183,12 +190,16 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
mutex_unlock(&priv->lock);
return 0;
case IIO_CHAN_INFO_ENABLE:
/* only boolean values accepted */
if (val < 0 || val > 1)
return -EINVAL;
mutex_lock(&priv->lock);
priv->ab_enable[chan->channel] = val;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@ -196,11 +207,18 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
mutex_unlock(&priv->lock);
return 0;
case IIO_CHAN_INFO_SCALE:
mutex_lock(&priv->lock);
/* Quadrature scaling only available in quadrature mode */
if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
if (!priv->quadrature_mode[chan->channel] &&
(val2 || val != 1)) {
mutex_unlock(&priv->lock);
return -EINVAL;
}
/* Only three gain states (1, 0.5, 0.25) */
if (val == 1 && !val2)
@ -214,11 +232,15 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
priv->quadrature_scale[chan->channel] = 2;
break;
default:
mutex_unlock(&priv->lock);
return -EINVAL;
}
else
else {
mutex_unlock(&priv->lock);
return -EINVAL;
}
mutex_unlock(&priv->lock);
return 0;
}
@ -255,6 +277,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
if (preset > 0xFFFFFF)
return -EINVAL;
mutex_lock(&priv->lock);
priv->preset[chan->channel] = preset;
/* Reset Byte Pointer */
@ -264,6 +288,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
mutex_unlock(&priv->lock);
return len;
}
@ -293,6 +319,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
mutex_lock(&priv->lock);
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
@ -301,6 +329,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
mutex_unlock(&priv->lock);
return len;
}
@ -358,6 +388,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
unsigned int mode_cfg = cnt_mode << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
mutex_lock(&priv->lock);
priv->count_mode[chan->channel] = cnt_mode;
/* Add quadrature mode configuration */
@ -367,6 +399,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -394,19 +428,26 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int synchronous_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
const unsigned int idr_cfg = synchronous_mode |
priv->index_polarity[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
unsigned int idr_cfg = synchronous_mode;
mutex_lock(&priv->lock);
idr_cfg |= priv->index_polarity[chan->channel] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
if (synchronous_mode && !priv->quadrature_mode[chan->channel])
if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
mutex_unlock(&priv->lock);
return -EINVAL;
}
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -434,8 +475,12 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int quadrature_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
unsigned int mode_cfg;
mutex_lock(&priv->lock);
mode_cfg = priv->count_mode[chan->channel] << 1;
if (quadrature_mode)
mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@ -453,6 +498,8 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -480,15 +527,20 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int index_polarity)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
index_polarity << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
unsigned int idr_cfg = index_polarity << 1;
mutex_lock(&priv->lock);
idr_cfg |= priv->synchronous_mode[chan->channel];
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -589,7 +641,7 @@ static int quad8_signal_read(struct counter_device *counter,
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
const struct quad8_iio *const priv = counter->priv;
struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
@ -603,6 +655,8 @@ static int quad8_count_read(struct counter_device *counter,
/* Borrow XOR Carry effectively doubles count range */
*val = (unsigned long)(borrow ^ carry) << 24;
mutex_lock(&priv->lock);
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@ -610,13 +664,15 @@ static int quad8_count_read(struct counter_device *counter,
for (i = 0; i < 3; i++)
*val |= (unsigned long)inb(base_offset) << (8 * i);
mutex_unlock(&priv->lock);
return 0;
}
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, unsigned long val)
{
const struct quad8_iio *const priv = counter->priv;
struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;
@ -624,6 +680,8 @@ static int quad8_count_write(struct counter_device *counter,
if (val > 0xFFFFFF)
return -EINVAL;
mutex_lock(&priv->lock);
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@ -647,6 +705,8 @@ static int quad8_count_write(struct counter_device *counter,
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
mutex_unlock(&priv->lock);
return 0;
}
@ -667,13 +727,13 @@ static enum counter_count_function quad8_count_functions_list[] = {
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
const struct quad8_iio *const priv = counter->priv;
struct quad8_iio *const priv = counter->priv;
const int id = count->id;
const unsigned int quadrature_mode = priv->quadrature_mode[id];
const unsigned int scale = priv->quadrature_scale[id];
if (quadrature_mode)
switch (scale) {
mutex_lock(&priv->lock);
if (priv->quadrature_mode[id])
switch (priv->quadrature_scale[id]) {
case 0:
*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
break;
@ -687,6 +747,8 @@ static int quad8_function_get(struct counter_device *counter,
else
*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
mutex_unlock(&priv->lock);
return 0;
}
@ -697,10 +759,15 @@ static int quad8_function_set(struct counter_device *counter,
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
unsigned int mode_cfg = priv->count_mode[id] << 1;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
const unsigned int idr_cfg = priv->index_polarity[id] << 1;
const int base_offset = priv->base + 2 * id + 1;
unsigned int mode_cfg;
unsigned int idr_cfg;
mutex_lock(&priv->lock);
mode_cfg = priv->count_mode[id] << 1;
idr_cfg = priv->index_polarity[id] << 1;
if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
@ -736,6 +803,8 @@ static int quad8_function_set(struct counter_device *counter,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -852,15 +921,20 @@ static int quad8_index_polarity_set(struct counter_device *counter,
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
index_polarity << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
unsigned int idr_cfg = index_polarity << 1;
mutex_lock(&priv->lock);
idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -887,19 +961,26 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
const unsigned int idr_cfg = synchronous_mode |
priv->index_polarity[channel_id] << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
unsigned int idr_cfg = synchronous_mode;
mutex_lock(&priv->lock);
idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
if (synchronous_mode && !priv->quadrature_mode[channel_id])
if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
mutex_unlock(&priv->lock);
return -EINVAL;
}
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -964,6 +1045,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
break;
}
mutex_lock(&priv->lock);
priv->count_mode[count->id] = cnt_mode;
/* Set count mode configuration value */
@ -976,6 +1059,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
@ -1017,6 +1102,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
if (err)
return err;
mutex_lock(&priv->lock);
priv->ab_enable[count->id] = ab_enable;
ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@ -1024,6 +1111,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
mutex_unlock(&priv->lock);
return len;
}
@ -1052,14 +1141,28 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
unsigned int preset)
{
const unsigned int base_offset = quad8iio->base + 2 * id;
int i;
quad8iio->preset[id] = preset;
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Set Preset Register */
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
}
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int preset;
int ret;
int i;
ret = kstrtouint(buf, 0, &preset);
if (ret)
@ -1069,14 +1172,11 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
if (preset > 0xFFFFFF)
return -EINVAL;
priv->preset[count->id] = preset;
mutex_lock(&priv->lock);
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
quad8_preset_register_set(priv, count->id, preset);
/* Set Preset Register */
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
mutex_unlock(&priv->lock);
return len;
}
@ -1084,15 +1184,20 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
const struct quad8_iio *const priv = counter->priv;
struct quad8_iio *const priv = counter->priv;
mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
return quad8_count_preset_read(counter, count, private, buf);
mutex_unlock(&priv->lock);
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
mutex_unlock(&priv->lock);
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
return sprintf(buf, "33554431\n");
}
@ -1101,15 +1206,29 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
unsigned int ceiling;
int ret;
ret = kstrtouint(buf, 0, &ceiling);
if (ret)
return ret;
/* Only 24-bit values are supported */
if (ceiling > 0xFFFFFF)
return -EINVAL;
mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
return quad8_count_preset_write(counter, count, private, buf,
len);
quad8_preset_register_set(priv, count->id, ceiling);
break;
}
mutex_unlock(&priv->lock);
return len;
}
@ -1137,6 +1256,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
mutex_lock(&priv->lock);
priv->preset_enable[count->id] = preset_enable;
ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@ -1144,6 +1265,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
mutex_unlock(&priv->lock);
return len;
}
@ -1429,6 +1552,9 @@ static int quad8_probe(struct device *dev, unsigned int id)
quad8iio->counter.priv = quad8iio;
quad8iio->base = base[id];
/* Initialize mutex */
mutex_init(&quad8iio->lock);
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */

63
drivers/iio/adc/ad7192.c
View File

@ -125,10 +125,10 @@
#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */
/* ID Register Bit Designations (AD7192_REG_ID) */
#define ID_AD7190 0x4
#define ID_AD7192 0x0
#define ID_AD7193 0x2
#define ID_AD7195 0x6
#define CHIPID_AD7190 0x4
#define CHIPID_AD7192 0x0
#define CHIPID_AD7193 0x2
#define CHIPID_AD7195 0x6
#define AD7192_ID_MASK 0x0F
/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
@ -161,7 +161,20 @@ enum {
AD7192_SYSCALIB_FULL_SCALE,
};
enum {
ID_AD7190,
ID_AD7192,
ID_AD7193,
ID_AD7195,
};
struct ad7192_chip_info {
unsigned int chip_id;
const char *name;
};
struct ad7192_state {
const struct ad7192_chip_info *chip_info;
struct regulator *avdd;
struct regulator *dvdd;
struct clk *mclk;
@ -172,7 +185,6 @@ struct ad7192_state {
u32 conf;
u32 scale_avail[8][2];
u8 gpocon;
u8 devid;
u8 clock_sel;
struct mutex lock; /* protect sensor state */
u8 syscalib_mode[8];
@ -348,7 +360,7 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
id &= AD7192_ID_MASK;
if (id != st->devid)
if (id != st->chip_info->chip_id)
dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
id);
@ -363,7 +375,7 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
st->mode |= AD7192_MODE_REJ60;
refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
if (refin2_en && st->devid != ID_AD7195)
if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
st->conf |= AD7192_CONF_REFSEL;
st->conf &= ~AD7192_CONF_CHOP;
@ -859,12 +871,31 @@ static const struct iio_chan_spec ad7193_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(14),
};
static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
[ID_AD7190] = {
.chip_id = CHIPID_AD7190,
.name = "ad7190",
},
[ID_AD7192] = {
.chip_id = CHIPID_AD7192,
.name = "ad7192",
},
[ID_AD7193] = {
.chip_id = CHIPID_AD7193,
.name = "ad7193",
},
[ID_AD7195] = {
.chip_id = CHIPID_AD7195,
.name = "ad7195",
},
};
static int ad7192_channels_config(struct iio_dev *indio_dev)
{
struct ad7192_state *st = iio_priv(indio_dev);
switch (st->devid) {
case ID_AD7193:
switch (st->chip_info->chip_id) {
case CHIPID_AD7193:
indio_dev->channels = ad7193_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
break;
@ -878,10 +909,10 @@ static int ad7192_channels_config(struct iio_dev *indio_dev)
}
static const struct of_device_id ad7192_of_match[] = {
{ .compatible = "adi,ad7190", .data = (void *)ID_AD7190 },
{ .compatible = "adi,ad7192", .data = (void *)ID_AD7192 },
{ .compatible = "adi,ad7193", .data = (void *)ID_AD7193 },
{ .compatible = "adi,ad7195", .data = (void *)ID_AD7195 },
{ .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
{ .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
{ .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
{ .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
{}
};
MODULE_DEVICE_TABLE(of, ad7192_of_match);
@ -938,16 +969,16 @@ static int ad7192_probe(struct spi_device *spi)
}
spi_set_drvdata(spi, indio_dev);
st->devid = (unsigned long)of_device_get_match_data(&spi->dev);
st->chip_info = of_device_get_match_data(&spi->dev);
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->name = st->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = ad7192_channels_config(indio_dev);
if (ret < 0)
goto error_disable_dvdd;
if (st->devid == ID_AD7195)
if (st->chip_info->chip_id == CHIPID_AD7195)
indio_dev->info = &ad7195_info;
else
indio_dev->info = &ad7192_info;

2
drivers/iio/adc/ad7793.c
View File

@ -542,7 +542,7 @@ static const struct iio_info ad7797_info = {
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
.attrs = &ad7793_attribute_group,
.attrs = &ad7797_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};

31
drivers/iio/adc/stm32-adc.c
View File

@ -1418,8 +1418,30 @@ static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
static void stm32_adc_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
struct stm32_adc *adc = iio_priv(indio_dev);
int residue = stm32_adc_dma_residue(adc);
iio_trigger_poll_chained(indio_dev->trig);
/*
* In DMA mode the trigger services of IIO are not used
* (e.g. no call to iio_trigger_poll).
* Calling irq handler associated to the hardware trigger is not
* relevant as the conversions have already been done. Data
* transfers are performed directly in DMA callback instead.
* This implementation avoids to call trigger irq handler that
* may sleep, in an atomic context (DMA irq handler context).
*/
dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
while (residue >= indio_dev->scan_bytes) {
u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
iio_push_to_buffers(indio_dev, buffer);
residue -= indio_dev->scan_bytes;
adc->bufi += indio_dev->scan_bytes;
if (adc->bufi >= adc->rx_buf_sz)
adc->bufi = 0;
}
}
static int stm32_adc_dma_start(struct iio_dev *indio_dev)
@ -1845,6 +1867,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
irqreturn_t (*handler)(int irq, void *p) = NULL;
struct stm32_adc *adc;
int ret;
@ -1911,9 +1934,11 @@ static int stm32_adc_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
if (!adc->dma_chan)
handler = &stm32_adc_trigger_handler;
ret = iio_triggered_buffer_setup(indio_dev,
&iio_pollfunc_store_time,
&stm32_adc_trigger_handler,
&iio_pollfunc_store_time, handler,
&stm32_adc_buffer_setup_ops);
if (ret) {
dev_err(&pdev->dev, "buffer setup failed\n");

6
drivers/iio/adc/ti-ads8344.c
View File

@ -29,7 +29,7 @@ struct ads8344 {
struct mutex lock;
u8 tx_buf ____cacheline_aligned;
u16 rx_buf;
u8 rx_buf[3];
};
#define ADS8344_VOLTAGE_CHANNEL(chan, si) \
@ -89,11 +89,11 @@ static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
udelay(9);
ret = spi_read(spi, &adc->rx_buf, 2);
ret = spi_read(spi, adc->rx_buf, sizeof(adc->rx_buf));
if (ret)
return ret;
return adc->rx_buf;
return adc->rx_buf[0] << 9 | adc->rx_buf[1] << 1 | adc->rx_buf[2] >> 7;
}
static int ads8344_read_raw(struct iio_dev *iio,

95
drivers/iio/adc/xilinx-xadc-core.c
View File

@ -102,6 +102,16 @@ static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
#define XADC_FLAGS_BUFFERED BIT(0)
/*
* The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
* not have a hardware FIFO. Which means an interrupt is generated for each
* conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
* overloaded by the interrupts that it soft-lockups. For this reason the driver
* limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
* but still responsive.
*/
#define XADC_MAX_SAMPLERATE 150000
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
@ -674,7 +684,7 @@ static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
spin_lock_irqsave(&xadc->lock, flags);
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS);
if (state)
val |= XADC_AXI_INT_EOS;
else
@ -722,13 +732,14 @@ static int xadc_power_adc_b(struct xadc *xadc, unsigned int seq_mode)
{
uint16_t val;
/* Powerdown the ADC-B when it is not needed. */
switch (seq_mode) {
case XADC_CONF1_SEQ_SIMULTANEOUS:
case XADC_CONF1_SEQ_INDEPENDENT:
val = XADC_CONF2_PD_ADC_B;
val = 0;
break;
default:
val = 0;
val = XADC_CONF2_PD_ADC_B;
break;
}
@ -797,6 +808,16 @@ static int xadc_preenable(struct iio_dev *indio_dev)
if (ret)
goto err;
/*
* In simultaneous mode the upper and lower aux channels are samples at
* the same time. In this mode the upper 8 bits in the sequencer
* register are don't care and the lower 8 bits control two channels
* each. As such we must set the bit if either the channel in the lower
* group or the upper group is enabled.
*/
if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS)
scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000;
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
if (ret)
goto err;
@ -823,11 +844,27 @@ static const struct iio_buffer_setup_ops xadc_buffer_ops = {
.postdisable = &xadc_postdisable,
};
static int xadc_read_samplerate(struct xadc *xadc)
{
unsigned int div;
uint16_t val16;
int ret;
ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
if (ret)
return ret;
div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
if (div < 2)
div = 2;
return xadc_get_dclk_rate(xadc) / div / 26;
}
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
unsigned int div;
uint16_t val16;
int ret;
@ -880,41 +917,31 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
if (ret)
ret = xadc_read_samplerate(xadc);
if (ret < 0)
return ret;
div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
if (div < 2)
div = 2;
*val = xadc_get_dclk_rate(xadc) / div / 26;
*val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
static int xadc_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long info)
static int xadc_write_samplerate(struct xadc *xadc, int val)
{
struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
if (info != IIO_CHAN_INFO_SAMP_FREQ)
return -EINVAL;
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
if (val > 150000)
val = 150000;
if (val > XADC_MAX_SAMPLERATE)
val = XADC_MAX_SAMPLERATE;
val *= 26;
@ -927,7 +954,7 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
* limit.
*/
div = clk_rate / val;
if (clk_rate / div / 26 > 150000)
if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
@ -938,6 +965,17 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
div << XADC_CONF2_DIV_OFFSET);
}
static int xadc_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
if (info != IIO_CHAN_INFO_SAMP_FREQ)
return -EINVAL;
return xadc_write_samplerate(xadc, val);
}
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@ -1223,6 +1261,21 @@ static int xadc_probe(struct platform_device *pdev)
if (ret)
goto err_free_samplerate_trigger;
/*
* Make sure not to exceed the maximum samplerate since otherwise the
* resulting interrupt storm will soft-lock the system.
*/
if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
ret = xadc_read_samplerate(xadc);
if (ret < 0)
goto err_free_samplerate_trigger;
if (ret > XADC_MAX_SAMPLERATE) {
ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
if (ret < 0)
goto err_free_samplerate_trigger;
}
}
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)

2
drivers/iio/common/st_sensors/st_sensors_core.c
View File

@ -79,7 +79,7 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
if (!sdata->sensor_settings->odr.addr)
if (!sdata->sensor_settings->odr.mask)
return 0;
err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);

2
drivers/iio/dac/ad5770r.c
View File

@ -525,7 +525,7 @@ static int ad5770r_channel_config(struct ad5770r_state *st)
ret = fwnode_property_read_u32(child, "num", &num);
if (ret)
return ret;
if (num > AD5770R_MAX_CHANNELS)
if (num >= AD5770R_MAX_CHANNELS)
return -EINVAL;
ret = fwnode_property_read_u32_array(child,

11
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
View File

@ -1617,6 +1617,10 @@ static int __maybe_unused inv_mpu_resume(struct device *dev)
if (result)
goto out_unlock;
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
result = inv_mpu6050_switch_engine(st, true, st->suspended_sensors);
if (result)
goto out_unlock;
@ -1638,13 +1642,18 @@ static int __maybe_unused inv_mpu_suspend(struct device *dev)
mutex_lock(&st->lock);
st->suspended_sensors = 0;
if (pm_runtime_suspended(dev)) {
result = 0;
goto out_unlock;
}
if (iio_buffer_enabled(indio_dev)) {
result = inv_mpu6050_prepare_fifo(st, false);
if (result)
goto out_unlock;
}
st->suspended_sensors = 0;
if (st->chip_config.accl_en)
st->suspended_sensors |= INV_MPU6050_SENSOR_ACCL;
if (st->chip_config.gyro_en)

3
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
View File

@ -337,6 +337,7 @@ enum st_lsm6dsx_fifo_mode {
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
* @decimator: Sensor decimation factor.
* @sip: Number of samples in a given pattern.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
@ -350,11 +351,13 @@ struct st_lsm6dsx_sensor {
u32 odr;
u16 watermark;
u8 decimator;
u8 sip;
s64 ts_ref;
struct {
const struct st_lsm6dsx_ext_dev_settings *settings;
u32 slv_odr;
u8 addr;
} ext_info;
};

23
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
View File

@ -93,6 +93,7 @@ st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
break;
}
sensor->decimator = decimator;
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
@ -337,7 +338,7 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
int err, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
u8 gyro_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
@ -399,19 +400,20 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
acc_sip = acc_sensor->sip;
ts_sip = hw->ts_sip;
offset = 0;
sip = 0;
while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
if (gyro_sip > 0) {
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
memcpy(gyro_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
if (acc_sip > 0) {
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
memcpy(acc_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
if (ext_sip > 0) {
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
memcpy(ext_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
@ -441,18 +443,25 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
if (gyro_sip-- > 0)
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
gyro_buff, gyro_sensor->ts_ref + ts);
if (acc_sip-- > 0)
gyro_sip--;
}
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
acc_buff, acc_sensor->ts_ref + ts);
if (ext_sip-- > 0)
acc_sip--;
}
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_EXT0],
ext_buff, ext_sensor->ts_ref + ts);
ext_sip--;
}
sip++;
}
}

24
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
View File

@ -2036,11 +2036,21 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
return 0;
}
static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *reg;
int err;
/*
* flush hw FIFO before device reset in order to avoid
* possible races on interrupt line 1. If the first interrupt
* line is asserted during hw reset the device will work in
* I3C-only mode (if it is supported)
*/
err = st_lsm6dsx_flush_fifo(hw);
if (err < 0 && err != -ENOTSUPP)
return err;
/* device sw reset */
reg = &hw->settings->reset;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
@ -2059,6 +2069,18 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
msleep(50);
return 0;
}
static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *reg;
int err;
err = st_lsm6dsx_reset_device(hw);
if (err < 0)
return err;
/* enable Block Data Update */
reg = &hw->settings->bdu;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,

29
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
View File

@ -421,7 +421,8 @@ int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
settings = sensor->ext_info.settings;
if (enable) {
err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
err = st_lsm6dsx_shub_set_odr(sensor,
sensor->ext_info.slv_odr);
if (err < 0)
return err;
} else {
@ -459,7 +460,7 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
if (err < 0)
return err;
delay = 1000000000 / sensor->odr;
delay = 1000000000 / sensor->ext_info.slv_odr;
usleep_range(delay, 2 * delay);
len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
@ -500,8 +501,8 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
iio_device_release_direct_mode(iio_dev);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = sensor->odr / 1000;
*val2 = (sensor->odr % 1000) * 1000;
*val = sensor->ext_info.slv_odr / 1000;
*val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
case IIO_CHAN_INFO_SCALE:
@ -535,8 +536,20 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
val = val * 1000 + val2 / 1000;
err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
if (!err)
sensor->odr = val;
if (!err) {
struct st_lsm6dsx_hw *hw = sensor->hw;
struct st_lsm6dsx_sensor *ref_sensor;
u8 odr_val;
int odr;
ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
if (odr < 0)
return odr;
sensor->ext_info.slv_odr = val;
sensor->odr = odr;
}
break;
}
default:
@ -613,6 +626,7 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
const struct st_lsm6dsx_ext_dev_settings *info,
u8 i2c_addr, const char *name)
{
enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
struct iio_chan_spec *ext_channels;
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
@ -628,7 +642,8 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
sensor = iio_priv(iio_dev);
sensor->id = id;
sensor->hw = hw;
sensor->odr = info->odr_table.odr_avl[0].milli_hz;
sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
sensor->gain = info->fs_table.fs_avl[0].gain;
sensor->ext_info.settings = info;
sensor->ext_info.addr = i2c_addr;

5
drivers/iio/industrialio-core.c
View File

@ -915,14 +915,11 @@ static ssize_t iio_write_channel_info(struct device *dev,
return -EINVAL;
integer = ch;
} else {
ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
if (ret)
return ret;
}
ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
scale_db);
if (ret)
return ret;
}
ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
integer, fract, this_attr->address);

2
include/linux/iio/iio.h
View File

@ -600,7 +600,7 @@ void iio_device_unregister(struct iio_dev *indio_dev);
* 0 on success, negative error number on failure.
*/
#define devm_iio_device_register(dev, indio_dev) \
__devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
__devm_iio_device_register((dev), (indio_dev), THIS_MODULE)
int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
struct module *this_mod);
void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);