p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 

tools/testing/selftests/net/forwarding/Makefile
  f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
  50fe062c80 ("selftests: forwarding: new test, verify host mdb entries")
https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Jakub Kicinski 2022-05-05 13:03:18 -07:00
parent 1c1ed5a484 68533eb1fb
commit c8227d568d
325 changed files with 3012 additions and 1567 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/arm64/memory-tagging-extension.rst
View File

@ -228,10 +228,10 @@ Core dump support
-----------------
The allocation tags for user memory mapped with ``PROT_MTE`` are dumped
in the core file as additional ``PT_ARM_MEMTAG_MTE`` segments. The
in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The
program header for such segment is defined as:
:``p_type``: ``PT_ARM_MEMTAG_MTE``
:``p_type``: ``PT_AARCH64_MEMTAG_MTE``
:``p_flags``: 0
:``p_offset``: segment file offset
:``p_vaddr``: segment virtual address, same as the corresponding

13
Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
View File

@ -22,7 +22,16 @@ properties:
const: microchip,mpfs-clkcfg
reg:
maxItems: 1
items:
- description: |
clock config registers:
These registers contain enable, reset & divider tables for the, cpu,
axi, ahb and rtc/mtimer reference clocks as well as enable and reset
for the peripheral clocks.
- description: |
mss pll dri registers:
Block of registers responsible for dynamic reconfiguration of the mss
pll
clocks:
maxItems: 1
@ -51,7 +60,7 @@ examples:
#size-cells = <2>;
clkcfg: clock-controller@20002000 {
compatible = "microchip,mpfs-clkcfg";
reg = <0x0 0x20002000 0x0 0x1000>;
reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
clocks = <&ref>;
#clock-cells = <1>;
};

7
Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
View File

@ -58,10 +58,9 @@ patternProperties:
description: |
The value (two's complement) to be programmed in the channel specific N correction register.
For remote channels only.
$ref: /schemas/types.yaml#/definitions/uint32
items:
minimum: 0
maximum: 255
$ref: /schemas/types.yaml#/definitions/int32
minimum: -128
maximum: 127
required:
- reg

2
Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
View File

@ -54,7 +54,7 @@ flexcom@f8034000 {
clock-names = "spi_clk";
atmel,fifo-size = <32>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at25f512b";
reg = <0>;
spi-max-frequency = <20000000>;

15
Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
View File

@ -31,11 +31,19 @@ properties:
to that of the RTC's count register.
clocks:
maxItems: 1
items:
- description: |
AHB clock
- description: |
Reference clock: divided by the prescaler to create a time-based
strobe (typically 1 Hz) for the calendar counter. By default, the rtc
on the PolarFire SoC shares it's reference with MTIMER so this will
be a 1 MHz clock.
clock-names:
items:
- const: rtc
- const: rtcref
required:
- compatible
@ -48,11 +56,12 @@ additionalProperties: false
examples:
- |
#include "dt-bindings/clock/microchip,mpfs-clock.h"
rtc@20124000 {
compatible = "microchip,mpfs-rtc";
reg = <0x20124000 0x1000>;
clocks = <&clkcfg 21>;
clock-names = "rtc";
clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
clock-names = "rtc", "rtcref";
interrupts = <80>, <81>;
};
...

1
Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
View File

@ -62,6 +62,7 @@ required:
- interrupts
- phys
- phy-names
- reg
allOf:
- if:

42
Documentation/security/siphash.rst
View File

@ -121,26 +121,36 @@ even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output)
instead of SipHash's 128-bit key. However, this may appeal to some
high-performance `jhash` users.
Danger!
HalfSipHash support is provided through the "hsiphash" family of functions.
Do not ever use HalfSipHash except for as a hashtable key function, and only
then when you can be absolutely certain that the outputs will never be
transmitted out of the kernel. This is only remotely useful over `jhash` as a
means of mitigating hashtable flooding denial of service attacks.
.. warning::
Do not ever use the hsiphash functions except for as a hashtable key
function, and only then when you can be absolutely certain that the outputs
will never be transmitted out of the kernel. This is only remotely useful
over `jhash` as a means of mitigating hashtable flooding denial of service
attacks.
Generating a HalfSipHash key
============================
On 64-bit kernels, the hsiphash functions actually implement SipHash-1-3, a
reduced-round variant of SipHash, instead of HalfSipHash-1-3. This is because in
64-bit code, SipHash-1-3 is no slower than HalfSipHash-1-3, and can be faster.
Note, this does *not* mean that in 64-bit kernels the hsiphash functions are the
same as the siphash ones, or that they are secure; the hsiphash functions still
use a less secure reduced-round algorithm and truncate their outputs to 32
bits.
Generating a hsiphash key
=========================
Keys should always be generated from a cryptographically secure source of
random numbers, either using get_random_bytes or get_random_once:
random numbers, either using get_random_bytes or get_random_once::
hsiphash_key_t key;
get_random_bytes(&key, sizeof(key));
hsiphash_key_t key;
get_random_bytes(&key, sizeof(key));
If you're not deriving your key from here, you're doing it wrong.
Using the HalfSipHash functions
===============================
Using the hsiphash functions
============================
There are two variants of the function, one that takes a list of integers, and
one that takes a buffer::
@ -183,7 +193,7 @@ You may then iterate like usual over the returned hash bucket.
Performance
===========
HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements,
this will not be a problem, as the hashtable lookup isn't the bottleneck. And
in general, this is probably a good sacrifice to make for the security and DoS
resistance of HalfSipHash.
hsiphash() is roughly 3 times slower than jhash(). For many replacements, this
will not be a problem, as the hashtable lookup isn't the bottleneck. And in
general, this is probably a good sacrifice to make for the security and DoS
resistance of hsiphash().

24
Documentation/virt/kvm/api.rst
View File

@ -5986,16 +5986,16 @@ should put the acknowledged interrupt vector into the 'epr' field.
#define KVM_SYSTEM_EVENT_RESET 2
#define KVM_SYSTEM_EVENT_CRASH 3
__u32 type;
__u64 flags;
__u32 ndata;
__u64 data[16];
} system_event;
If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered
a system-level event using some architecture specific mechanism (hypercall
or some special instruction). In case of ARM64, this is triggered using
HVC instruction based PSCI call from the vcpu. The 'type' field describes
the system-level event type. The 'flags' field describes architecture
specific flags for the system-level event.
HVC instruction based PSCI call from the vcpu.
The 'type' field describes the system-level event type.
Valid values for 'type' are:
- KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the
@ -6010,10 +6010,20 @@ Valid values for 'type' are:
to ignore the request, or to gather VM memory core dump and/or
reset/shutdown of the VM.
Valid flags are:
If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain
architecture specific information for the system-level event. Only
the first `ndata` items (possibly zero) of the data array are valid.
- KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (arm64 only) -- the guest issued
a SYSTEM_RESET2 call according to v1.1 of the PSCI specification.
- for arm64, data[0] is set to KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 if
the guest issued a SYSTEM_RESET2 call according to v1.1 of the PSCI
specification.
- for RISC-V, data[0] is set to the value of the second argument of the
``sbi_system_reset`` call.
Previous versions of Linux defined a `flags` member in this struct. The
field is now aliased to `data[0]`. Userspace can assume that it is only
written if ndata is greater than 0.
::

16
MAINTAINERS
View File

@ -2644,6 +2644,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
B: mailto:linux-samsung-soc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
@ -11981,6 +11982,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
F: Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
F: drivers/power/supply/max14577_charger.c
@ -11992,6 +11994,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/*/maxim,max14577.yaml
F: Documentation/devicetree/bindings/*/maxim,max77686.yaml
F: Documentation/devicetree/bindings/*/maxim,max77693.yaml
@ -12685,6 +12688,7 @@ MEMORY CONTROLLER DRIVERS
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-kernel@vger.kernel.org
S: Maintained
B: mailto:krzysztof.kozlowski@linaro.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
F: Documentation/devicetree/bindings/memory-controllers/
F: drivers/memory/
@ -15626,6 +15630,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
B: mailto:linux-samsung-soc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
F: drivers/pinctrl/samsung/
@ -17348,6 +17353,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/sound/samsung*
F: sound/soc/samsung/
@ -17392,6 +17398,7 @@ M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
@ -21457,6 +21464,15 @@ F: arch/x86/include/asm/uv/
F: arch/x86/kernel/apic/x2apic_uv_x.c
F: arch/x86/platform/uv/
X86 STACK UNWINDING
M: Josh Poimboeuf <jpoimboe@redhat.com>
M: Peter Zijlstra <peterz@infradead.org>
S: Supported
F: arch/x86/include/asm/unwind*.h
F: arch/x86/kernel/dumpstack.c
F: arch/x86/kernel/stacktrace.c
F: arch/x86/kernel/unwind_*.c
X86 VDSO
M: Andy Lutomirski <luto@kernel.org>
L: linux-kernel@vger.kernel.org

2
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 18
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc5
NAME = Superb Owl
# *DOCUMENTATION*

2
arch/arm/boot/dts/am33xx-l4.dtsi
View File

@ -263,6 +263,8 @@ tscadc: tscadc@0 {
compatible = "ti,am3359-tscadc";
reg = <0x0 0x1000>;
interrupts = <16>;
clocks = <&adc_tsc_fck>;
clock-names = "fck";
status = "disabled";
dmas = <&edma 53 0>, <&edma 57 0>;
dma-names = "fifo0", "fifo1";

45
arch/arm/boot/dts/am3517-evm.dts
View File

@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy {
};
&davinci_emac {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ethernet_pins>;
status = "okay";
};
&davinci_mdio {
@ -193,6 +197,8 @@ dpi_out: endpoint {
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
@ -205,6 +211,8 @@ tca6416: gpio@21 {
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
@ -223,6 +231,8 @@ &mmc3 {
};
&usbhshost {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
@ -231,8 +241,35 @@ &usbhsehci {
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
ethernet_pins: pinmux_ethernet_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <

9
arch/arm/boot/dts/am3517-som.dtsi
View File

@ -69,6 +69,8 @@ nand@0,0 {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
@ -179,6 +181,13 @@ bluetooth {
&omap3_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */

2
arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
View File

@ -44,7 +44,7 @@ &spi0 {
status = "okay";
/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
spi-flash@0 {
flash@0 {
compatible = "mxicy,mx25u4035", "jedec,spi-nor";
spi-max-frequency = <33000000>;
reg = <0>;

2
arch/arm/boot/dts/at91-kizbox3-hs.dts
View File

@ -225,7 +225,7 @@ pinctrl_pio_zbe_rst: gpio_zbe_rst {
pinctrl_pio_io_reset: gpio_io_reset {
pinmux = <PIN_PB30__GPIO>;
bias-disable;
drive-open-drain;
drive-open-drain = <1>;
output-low;
};
pinctrl_pio_input: gpio_input {

2
arch/arm/boot/dts/at91-kizbox3_common.dtsi
View File

@ -211,7 +211,7 @@ pinctrl_flx4_default: flx4_i2c6_default {
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
<PIN_PD13__FLEXCOM4_IO1>; //CLK
bias-disable;
drive-open-drain;
drive-open-drain = <1>;
};
pinctrl_pwm0 {

2
arch/arm/boot/dts/at91-q5xr5.dts
View File

@ -125,7 +125,7 @@ &spi0 {
cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;

2
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
View File

@ -214,7 +214,7 @@ &qspi1 {
pinctrl-0 = <&pinctrl_qspi1_default>;
status = "disabled";
qspi1_flash: spi_flash@0 {
qspi1_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";

2
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
View File

@ -191,7 +191,7 @@ &pwm0 {
&qspi1 {
status = "okay";
qspi1_flash: spi_flash@0 {
qspi1_flash: flash@0 {
status = "okay";
};
};

2
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View File

@ -137,7 +137,7 @@ spi0: spi@f8000000 {
pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
reg = <0>;
spi-max-frequency = <50000000>;

8
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View File

@ -57,8 +57,8 @@ slot@0 {
};
spi0: spi@f0004000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
@ -171,8 +171,8 @@ slot@0 {
};
spi1: spi@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};

2
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
View File

@ -49,7 +49,7 @@ spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

6
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View File

@ -81,8 +81,8 @@ usart4: serial@fc010000 {
};
spi1: spi@fc018000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioB 21 0>;
status = "okay";
};
@ -140,7 +140,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_spi0_cs: spi0_cs_default {
pinctrl_spi1_cs: spi1_cs_default {
atmel,pins =
<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};

2
arch/arm/boot/dts/at91-sama5d4ek.dts
View File

@ -65,7 +65,7 @@ ssc0: ssc@f8008000 {
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

4
arch/arm/boot/dts/at91-sama7g5ek.dts
View File

@ -495,7 +495,7 @@ pinctrl_flx0_default: flx0_default {
pinctrl_flx3_default: flx3_default {
pinmux = <PIN_PD16__FLEXCOM3_IO0>,
<PIN_PD17__FLEXCOM3_IO1>;
bias-disable;
bias-pull-up;
};
pinctrl_flx4_default: flx4_default {
@ -655,7 +655,7 @@ pinctrl_qspi: qspi {
<PIN_PB21__QSPI0_INT>;
bias-disable;
slew-rate = <0>;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
};
pinctrl_sdmmc0_default: sdmmc0_default {

2
arch/arm/boot/dts/at91-vinco.dts
View File

@ -59,7 +59,7 @@ slot@0 {
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "n25q32b", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;

4
arch/arm/boot/dts/at91rm9200ek.dts
View File

@ -73,7 +73,7 @@ &pinctrl_uart1_dcd
spi0: spi@fffe0000 {
status = "okay";
cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <15000000>;
reg = <0>;
@ -94,7 +94,7 @@ usb0: ohci@300000 {
status = "okay";
};
nor_flash@10000000 {
flash@10000000 {
compatible = "cfi-flash";
reg = <0x10000000 0x800000>;
linux,mtd-name = "physmap-flash.0";

2
arch/arm/boot/dts/at91sam9260ek.dts
View File

@ -92,7 +92,7 @@ macb0: ethernet@fffc4000 {
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
mtd_dataflash@1 {
flash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;

2
arch/arm/boot/dts/at91sam9261ek.dts
View File

@ -145,7 +145,7 @@ spi0: spi@fffc8000 {
cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
status = "okay";
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;

2
arch/arm/boot/dts/at91sam9263ek.dts
View File

@ -95,7 +95,7 @@ pinctrl_board_mmc0: mmc0-board {
spi0: spi@fffa4000 {
status = "okay";
cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <0>;

45
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
View File

@ -110,7 +110,7 @@ ssc0: ssc@fffbc000 {
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
mtd_dataflash@1 {
flash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
@ -214,11 +214,23 @@ i2c-gpio-0 {
24c512@50 {
compatible = "atmel,24c512";
reg = <0x50>;
vcc-supply = <&reg_3v3>;
};
wm8731: wm8731@1b {
compatible = "wm8731";
reg = <0x1b>;
/* PCK0 at 12MHz */
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <12000000>;
HPVDD-supply = <&vcc_dac>;
AVDD-supply = <&vcc_dac>;
DCVDD-supply = <&reg_3v3>;
DBVDD-supply = <&reg_3v3>;
};
};
@ -254,4 +266,35 @@ sound {
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8731>;
};
reg_5v: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_3v3: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "3V3";
vin-supply = <&reg_5v>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_1v: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "1V";
vin-supply = <&reg_5v>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vcc_dac: fixedregulator3 {
compatible = "regulator-fixed";
regulator-name = "VCC_DAC";
vin-supply = <&reg_3v3>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};

2
arch/arm/boot/dts/at91sam9m10g45ek.dts
View File

@ -167,7 +167,7 @@ pinctrl_pwm_leds: pwm-led {
spi0: spi@fffa4000{
status = "okay";
cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <13000000>;
reg = <0>;

2
arch/arm/boot/dts/at91sam9n12ek.dts
View File

@ -119,7 +119,7 @@ pinctrl_usb1_vbus_sense: usb1_vbus_sense {
spi0: spi@f0000000 {
status = "okay";
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

2
arch/arm/boot/dts/at91sam9rlek.dts
View File

@ -180,7 +180,7 @@ usb0: gadget@fffd4000 {
spi0: spi@fffcc000 {
status = "okay";
cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <15000000>;
reg = <0>;

2
arch/arm/boot/dts/at91sam9x5ek.dtsi
View File

@ -125,7 +125,7 @@ &spi0 {
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
status = "disabled"; /* conflicts with mmc1 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

4
arch/arm/boot/dts/dra7-l4.dtsi
View File

@ -4188,11 +4188,11 @@ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
<SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
power-domains = <&prm_vpe>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;

10
arch/arm/boot/dts/imx6qdl-apalis.dtsi
View File

@ -286,6 +286,8 @@ vgen6_reg: vgen6 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
/* SGTL5000 sys_mclk */
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
@ -811,6 +811,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
>;
};
pinctrl_sgtl5000: sgtl5000grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0

2
arch/arm/boot/dts/imx6ull-colibri.dtsi
View File

@ -37,7 +37,7 @@ reg_module_3v3_avdd: regulator-module-3v3-avdd {
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_reg_sd>;
regulator-always-on;

15
arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
View File

@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};

15
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
View File

@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};

15
arch/arm/boot/dts/logicpd-som-lv.dtsi
View File

@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};
&uart2 {
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";

2
arch/arm/boot/dts/omap3-gta04.dtsi
View File

@ -31,6 +31,8 @@ chosen {
aliases {
display0 = &lcd;
display1 = &tv0;
/delete-property/ mmc2;
/delete-property/ mmc3;
};
ldo_3v3: fixedregulator {

2
arch/arm/boot/dts/sama5d3xmb.dtsi
View File

@ -26,7 +26,7 @@ slot@0 {
spi0: spi@f0004000 {
dmas = <0>, <0>; /* Do not use DMA for spi0 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

2
arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
View File

@ -25,7 +25,7 @@ slot@0 {
spi0: spi@f0004000 {
dmas = <0>, <0>; /* Do not use DMA for spi0 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

18
arch/arm/boot/dts/sama7g5.dtsi
View File

@ -601,9 +601,9 @@ i2c1: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
<&dma0 AT91_XDMAC_DT_PERID(7)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
@ -786,9 +786,9 @@ i2c8: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
<&dma0 AT91_XDMAC_DT_PERID(22)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
<&dma0 AT91_XDMAC_DT_PERID(21)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
@ -810,9 +810,9 @@ i2c9: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
<&dma0 AT91_XDMAC_DT_PERID(24)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
<&dma0 AT91_XDMAC_DT_PERID(23)>;
dma-names = "tx", "rx";
status = "disabled";
};
};

2
arch/arm/boot/dts/usb_a9263.dts
View File

@ -60,7 +60,7 @@ usb1: gadget@fff78000 {
spi0: spi@fffa4000 {
cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
status = "okay";
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;

1
arch/arm/configs/multi_v7_defconfig
View File

@ -673,6 +673,7 @@ CONFIG_VIDEO_STI_DELTA=m
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_VIDEO_TEGRA_VDE=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_ADV7180=m

3
arch/arm/configs/tegra_defconfig
View File

@ -286,7 +286,8 @@ CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_STAGING_MEDIA=y
CONFIG_TEGRA_VDE=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_TEGRA_VDE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=m

2
arch/arm/mach-omap2/omap4-common.c
View File

@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
gic_dist_base_addr = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!gic_dist_base_addr);
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
twd_base = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!twd_base);
skip_errata_init:

40
arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
View File

@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <761000>;
@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;

40
arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
View File

@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
@ -76,26 +56,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <751000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <751000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <751000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <751000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <771000>;

8
arch/arm64/boot/dts/amlogic/meson-s4.dtsi
View File

@ -13,28 +13,28 @@ cpus {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
};

1
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
View File

@ -437,6 +437,7 @@ &gpio {
"",
"eMMC_RST#", /* BOOT_12 */
"eMMC_DS", /* BOOT_13 */
"", "",
/* GPIOC */
"SD_D0_B", /* GPIOC_0 */
"SD_D1_B", /* GPIOC_1 */

20
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
View File

@ -95,26 +95,6 @@ cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <730000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <730000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <730000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <666666666>;
opp-microvolt = <750000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <770000>;

4
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
View File

@ -146,12 +146,14 @@ &uart3 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
@ -215,7 +217,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};

4
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
View File

@ -211,12 +211,14 @@ &uart4 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
@ -309,7 +311,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};

4
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
View File

@ -238,12 +238,14 @@ &uart4 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
@ -358,7 +360,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};

4
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
View File

@ -59,6 +59,10 @@ pmic@4b {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";

10
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View File

@ -293,7 +293,7 @@ spba2: spba-bus@30000000 {
ranges;
sai2: sai@30020000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
@ -307,7 +307,7 @@ sai2: sai@30020000 {
};
sai3: sai@30030000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
@ -321,7 +321,7 @@ sai3: sai@30030000 {
};
sai5: sai@30050000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
@ -337,7 +337,7 @@ sai5: sai@30050000 {
};
sai6: sai@30060000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
@ -394,7 +394,7 @@ spdif1: spdif@30090000 {
};
sai7: sai@300b0000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x300b0000 0x10000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI7_IPG>,

2
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
View File

@ -253,7 +253,7 @@ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <4>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};

2
arch/arm64/boot/dts/freescale/imx8qm.dtsi
View File

@ -196,7 +196,7 @@ pd: imx8qx-pd {
};
clk: clock-controller {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
#clock-cells = <2>;
};

8
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
View File

@ -262,25 +262,25 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio5 {
pins = "gpio5";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
};

8
arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
View File

@ -462,25 +462,25 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio5 {
pins = "gpio5";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};

6
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
View File

@ -174,19 +174,19 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
};

6
arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
View File

@ -148,19 +148,19 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
};

6
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
View File

@ -59,7 +59,7 @@ gpio0 {
gpio1 {
pins = "gpio1";
function = "fps-out";
drive-push-pull;
drive-push-pull = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <7>;
maxim,active-fps-power-down-slot = <0>;
@ -68,7 +68,7 @@ gpio1 {
gpio2_3 {
pins = "gpio2", "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
};
@ -80,7 +80,7 @@ gpio4 {
gpio5_6_7 {
pins = "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};

8
arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
View File

@ -1351,7 +1351,7 @@ gpio0 {
gpio1 {
pins = "gpio1";
function = "fps-out";
drive-push-pull;
drive-push-pull = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <7>;
maxim,active-fps-power-down-slot = <0>;
@ -1360,14 +1360,14 @@ gpio1 {
gpio2 {
pins = "gpio2";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
};
gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
};
@ -1379,7 +1379,7 @@ gpio4 {
gpio5_6_7 {
pins = "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};

8
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
View File

@ -195,7 +195,7 @@ gpio0 {
gpio1 {
pins = "gpio1";
function = "fps-out";
drive-push-pull;
drive-push-pull = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
maxim,active-fps-power-up-slot = <0>;
maxim,active-fps-power-down-slot = <7>;
@ -204,7 +204,7 @@ gpio1 {
gpio2 {
pins = "gpio2";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <0>;
maxim,active-fps-power-down-slot = <7>;
@ -213,7 +213,7 @@ gpio2 {
gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <4>;
maxim,active-fps-power-down-slot = <3>;
@ -227,7 +227,7 @@ gpio4 {
gpio5_6_7 {
pins = "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};

4
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
View File

@ -1386,7 +1386,7 @@ gpio0_1_2_7 {
gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <4>;
maxim,active-fps-power-down-slot = <2>;
@ -1395,7 +1395,7 @@ gpio3 {
gpio5_6 {
pins = "gpio5", "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio4 {

1
arch/arm64/include/asm/kvm_emulate.h
View File

@ -40,6 +40,7 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu);
void kvm_inject_vabt(struct kvm_vcpu *vcpu);
void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr);
void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
void kvm_inject_size_fault(struct kvm_vcpu *vcpu);
void kvm_vcpu_wfi(struct kvm_vcpu *vcpu);

2
arch/arm64/kernel/elfcore.c
View File

@ -95,7 +95,7 @@ int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
for_each_mte_vma(current, vma) {
struct elf_phdr phdr;
phdr.p_type = PT_ARM_MEMTAG_MTE;
phdr.p_type = PT_AARCH64_MEMTAG_MTE;
phdr.p_offset = offset;
phdr.p_vaddr = vma->vm_start;
phdr.p_paddr = 0;

16
arch/arm64/kvm/hyp/nvhe/host.S
View File

@ -198,15 +198,15 @@ SYM_CODE_START(__kvm_hyp_host_vector)
invalid_host_el2_vect // FIQ EL2h
invalid_host_el2_vect // Error EL2h
host_el1_sync_vect // Synchronous 64-bit EL1
invalid_host_el1_vect // IRQ 64-bit EL1
invalid_host_el1_vect // FIQ 64-bit EL1
invalid_host_el1_vect // Error 64-bit EL1
host_el1_sync_vect // Synchronous 64-bit EL1/EL0
invalid_host_el1_vect // IRQ 64-bit EL1/EL0
invalid_host_el1_vect // FIQ 64-bit EL1/EL0
invalid_host_el1_vect // Error 64-bit EL1/EL0
invalid_host_el1_vect // Synchronous 32-bit EL1
invalid_host_el1_vect // IRQ 32-bit EL1
invalid_host_el1_vect // FIQ 32-bit EL1
invalid_host_el1_vect // Error 32-bit EL1
host_el1_sync_vect // Synchronous 32-bit EL1/EL0
invalid_host_el1_vect // IRQ 32-bit EL1/EL0
invalid_host_el1_vect // FIQ 32-bit EL1/EL0
invalid_host_el1_vect // Error 32-bit EL1/EL0
SYM_CODE_END(__kvm_hyp_host_vector)
/*

28
arch/arm64/kvm/inject_fault.c
View File

@ -145,6 +145,34 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr)
inject_abt64(vcpu, true, addr);
}
void kvm_inject_size_fault(struct kvm_vcpu *vcpu)
{
unsigned long addr, esr;
addr = kvm_vcpu_get_fault_ipa(vcpu);
addr |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
if (kvm_vcpu_trap_is_iabt(vcpu))
kvm_inject_pabt(vcpu, addr);
else
kvm_inject_dabt(vcpu, addr);
/*
* If AArch64 or LPAE, set FSC to 0 to indicate an Address
* Size Fault at level 0, as if exceeding PARange.
*
* Non-LPAE guests will only get the external abort, as there
* is no way to to describe the ASF.
*/
if (vcpu_el1_is_32bit(vcpu) &&
!(vcpu_read_sys_reg(vcpu, TCR_EL1) & TTBCR_EAE))
return;
esr = vcpu_read_sys_reg(vcpu, ESR_EL1);
esr &= ~GENMASK_ULL(5, 0);
vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
}
/**
* kvm_inject_undefined - inject an undefined instruction into the guest
* @vcpu: The vCPU in which to inject the exception

19
arch/arm64/kvm/mmu.c
View File

@ -1337,6 +1337,25 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
if (fault_status == FSC_FAULT) {
/* Beyond sanitised PARange (which is the IPA limit) */
if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) {
kvm_inject_size_fault(vcpu);
return 1;
}
/* Falls between the IPA range and the PARange? */
if (fault_ipa >= BIT_ULL(vcpu->arch.hw_mmu->pgt->ia_bits)) {
fault_ipa |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
if (is_iabt)
kvm_inject_pabt(vcpu, fault_ipa);
else
kvm_inject_dabt(vcpu, fault_ipa);
return 1;
}
}
/* Synchronous External Abort? */
if (kvm_vcpu_abt_issea(vcpu)) {
/*

23
arch/arm64/kvm/pmu-emul.c
View File

@ -177,6 +177,9 @@ u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
struct kvm_pmu *pmu = &vcpu->arch.pmu;
struct kvm_pmc *pmc = &pmu->pmc[select_idx];
if (!kvm_vcpu_has_pmu(vcpu))
return 0;
counter = kvm_pmu_get_pair_counter_value(vcpu, pmc);
if (kvm_pmu_pmc_is_chained(pmc) &&
@ -198,6 +201,9 @@ void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
{
u64 reg;
if (!kvm_vcpu_has_pmu(vcpu))
return;
reg = (select_idx == ARMV8_PMU_CYCLE_IDX)
? PMCCNTR_EL0 : PMEVCNTR0_EL0 + select_idx;
__vcpu_sys_reg(vcpu, reg) += (s64)val - kvm_pmu_get_counter_value(vcpu, select_idx);
@ -322,6 +328,9 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
struct kvm_pmu *pmu = &vcpu->arch.pmu;
struct kvm_pmc *pmc;
if (!kvm_vcpu_has_pmu(vcpu))
return;
if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val)
return;
@ -357,7 +366,7 @@ void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
struct kvm_pmu *pmu = &vcpu->arch.pmu;
struct kvm_pmc *pmc;
if (!val)
if (!kvm_vcpu_has_pmu(vcpu) || !val)
return;
for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) {
@ -527,6 +536,9 @@ void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val)
struct kvm_pmu *pmu = &vcpu->arch.pmu;
int i;
if (!kvm_vcpu_has_pmu(vcpu))
return;
if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E))
return;
@ -576,6 +588,9 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
{
int i;
if (!kvm_vcpu_has_pmu(vcpu))
return;
if (val & ARMV8_PMU_PMCR_E) {
kvm_pmu_enable_counter_mask(vcpu,
__vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
@ -739,6 +754,9 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
{
u64 reg, mask;
if (!kvm_vcpu_has_pmu(vcpu))
return;
mask = ARMV8_PMU_EVTYPE_MASK;
mask &= ~ARMV8_PMU_EVTYPE_EVENT;
mask |= kvm_pmu_event_mask(vcpu->kvm);
@ -827,6 +845,9 @@ u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1)
u64 val, mask = 0;
int base, i, nr_events;
if (!kvm_vcpu_has_pmu(vcpu))
return 0;
if (!pmceid1) {
val = read_sysreg(pmceid0_el0);
base = 0;

3
arch/arm64/kvm/psci.c
View File

@ -181,7 +181,8 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type, u64 flags)
memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event));
vcpu->run->system_event.type = type;
vcpu->run->system_event.flags = flags;
vcpu->run->system_event.ndata = 1;
vcpu->run->system_event.data[0] = flags;
vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
}

16
arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi
View File

@ -7,7 +7,7 @@ core_pwm0: pwm@41000000 {
reg = <0x0 0x41000000 0x0 0xF0>;
microchip,sync-update-mask = /bits/ 32 <0>;
#pwm-cells = <2>;
clocks = <&clkcfg CLK_FIC3>;
clocks = <&fabric_clk3>;
status = "disabled";
};
@ -16,10 +16,22 @@ i2c2: i2c@44000000 {
reg = <0x0 0x44000000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkcfg CLK_FIC3>;
clocks = <&fabric_clk3>;
interrupt-parent = <&plic>;
interrupts = <122>;
clock-frequency = <100000>;
status = "disabled";
};
fabric_clk3: fabric-clk3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <62500000>;
};
fabric_clk1: fabric-clk1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
};

2
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
View File

@ -45,7 +45,7 @@ ddrc_cache_hi: memory@1000000000 {
};
&refclk {
clock-frequency = <600000000>;
clock-frequency = <125000000>;
};
&mmuart1 {

10
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
View File

@ -141,7 +141,7 @@ cpu4_intc: interrupt-controller {
};
};
refclk: msspllclk {
refclk: mssrefclk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
@ -190,7 +190,7 @@ plic: interrupt-controller@c000000 {
clkcfg: clkcfg@20002000 {
compatible = "microchip,mpfs-clkcfg";
reg = <0x0 0x20002000 0x0 0x1000>;
reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
clocks = <&refclk>;
#clock-cells = <1>;
};
@ -393,8 +393,8 @@ rtc: rtc@20124000 {
reg = <0x0 0x20124000 0x0 0x1000>;
interrupt-parent = <&plic>;
interrupts = <80>, <81>;
clocks = <&clkcfg CLK_RTC>;
clock-names = "rtc";
clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
clock-names = "rtc", "rtcref";
status = "disabled";
};
@ -424,7 +424,7 @@ pcie: pcie@2000000000 {
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
interrupt-map-mask = <0 0 0 7>;
clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>;
clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
clock-names = "fic0", "fic1", "fic3";
ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
msi-parent = <&pcie>;

1
arch/riscv/configs/defconfig
View File

@ -101,6 +101,7 @@ CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_VIRTIO=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y

1
arch/riscv/configs/rv32_defconfig
View File

@ -93,6 +93,7 @@ CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_VIRTIO=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y

2
arch/riscv/kernel/patch.c
View File

@ -104,7 +104,7 @@ static int patch_text_cb(void *data)
struct patch_insn *patch = data;
int ret = 0;
if (atomic_inc_return(&patch->cpu_count) == 1) {
if (atomic_inc_return(&patch->cpu_count) == num_online_cpus()) {
ret =
patch_text_nosync(patch->addr, &patch->insn,
GET_INSN_LENGTH(patch->insn));

5
arch/riscv/kvm/vcpu_sbi.c
View File

@ -83,7 +83,7 @@ void kvm_riscv_vcpu_sbi_forward(struct kvm_vcpu *vcpu, struct kvm_run *run)
void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,
struct kvm_run *run,
u32 type, u64 flags)
u32 type, u64 reason)
{
unsigned long i;
struct kvm_vcpu *tmp;
@ -94,7 +94,8 @@ void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,
memset(&run->system_event, 0, sizeof(run->system_event));
run->system_event.type = type;
run->system_event.flags = flags;
run->system_event.ndata = 1;
run->system_event.data[0] = reason;
run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
}

2
arch/x86/Kconfig
View File

@ -1866,7 +1866,7 @@ config X86_KERNEL_IBT
code with them to make this happen.
In addition to building the kernel with IBT, seal all functions that
are not indirect call targets, avoiding them ever becomming one.
are not indirect call targets, avoiding them ever becoming one.
This requires LTO like objtool runs and will slow down the build. It
does significantly reduce the number of ENDBR instructions in the

3
arch/x86/entry/entry_64.S
View File

@ -337,6 +337,9 @@ SYM_CODE_END(ret_from_fork)
call \cfunc
/* For some configurations \cfunc ends up being a noreturn. */
REACHABLE
jmp error_return
.endm

3
arch/x86/include/asm/intel-family.h
View File

@ -26,6 +26,7 @@
* _G - parts with extra graphics on
* _X - regular server parts
* _D - micro server parts
* _N,_P - other mobile parts
*
* Historical OPTDIFFs:
*
@ -107,8 +108,10 @@
#define INTEL_FAM6_ALDERLAKE 0x97 /* Golden Cove / Gracemont */
#define INTEL_FAM6_ALDERLAKE_L 0x9A /* Golden Cove / Gracemont */
#define INTEL_FAM6_ALDERLAKE_N 0xBE
#define INTEL_FAM6_RAPTORLAKE 0xB7
#define INTEL_FAM6_RAPTORLAKE_P 0xBA
/* "Small Core" Processors (Atom) */

2
arch/x86/include/asm/microcode.h
View File

@ -131,10 +131,12 @@ extern void __init load_ucode_bsp(void);
extern void load_ucode_ap(void);
void reload_early_microcode(void);
extern bool initrd_gone;
void microcode_bsp_resume(void);
#else
static inline void __init load_ucode_bsp(void) { }
static inline void load_ucode_ap(void) { }
static inline void reload_early_microcode(void) { }
static inline void microcode_bsp_resume(void) { }
#endif
#endif /* _ASM_X86_MICROCODE_H */

4
arch/x86/include/asm/pgtable_types.h
View File

@ -559,10 +559,6 @@ static inline void update_page_count(int level, unsigned long pages) { }
extern pte_t *lookup_address(unsigned long address, unsigned int *level);
extern pte_t *lookup_address_in_pgd(pgd_t *pgd, unsigned long address,
unsigned int *level);
struct mm_struct;
extern pte_t *lookup_address_in_mm(struct mm_struct *mm, unsigned long address,
unsigned int *level);
extern pmd_t *lookup_pmd_address(unsigned long address);
extern phys_addr_t slow_virt_to_phys(void *__address);
extern int __init kernel_map_pages_in_pgd(pgd_t *pgd, u64 pfn,

1
arch/x86/include/asm/static_call.h
View File

@ -26,6 +26,7 @@
".align 4 \n" \
".globl " STATIC_CALL_TRAMP_STR(name) " \n" \
STATIC_CALL_TRAMP_STR(name) ": \n" \
ANNOTATE_NOENDBR \
insns " \n" \
".byte 0x53, 0x43, 0x54 \n" \
".type " STATIC_CALL_TRAMP_STR(name) ", @function \n" \

6
arch/x86/kernel/cpu/microcode/core.c
View File

@ -758,9 +758,9 @@ static struct subsys_interface mc_cpu_interface = {
};
/**
* mc_bp_resume - Update boot CPU microcode during resume.
* microcode_bsp_resume - Update boot CPU microcode during resume.
*/
static void mc_bp_resume(void)
void microcode_bsp_resume(void)
{
int cpu = smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@ -772,7 +772,7 @@ static void mc_bp_resume(void)
}
static struct syscore_ops mc_syscore_ops = {
.resume = mc_bp_resume,
.resume = microcode_bsp_resume,
};
static int mc_cpu_starting(unsigned int cpu)

8
arch/x86/kernel/unwind_orc.c
View File

@ -339,11 +339,11 @@ static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
struct stack_info *info = &state->stack_info;
void *addr = (void *)_addr;
if (!on_stack(info, addr, len) &&
(get_stack_info(addr, state->task, info, &state->stack_mask)))
return false;
if (on_stack(info, addr, len))
return true;
return true;
return !get_stack_info(addr, state->task, info, &state->stack_mask) &&
on_stack(info, addr, len);
}
static bool deref_stack_reg(struct unwind_state *state, unsigned long addr,

19
arch/x86/kvm/cpuid.c
View File

@ -1085,12 +1085,21 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
case 0x80000000:
entry->eax = min(entry->eax, 0x80000021);
/*
* Serializing LFENCE is reported in a multitude of ways,
* and NullSegClearsBase is not reported in CPUID on Zen2;
* help userspace by providing the CPUID leaf ourselves.
* Serializing LFENCE is reported in a multitude of ways, and
* NullSegClearsBase is not reported in CPUID on Zen2; help
* userspace by providing the CPUID leaf ourselves.
*
* However, only do it if the host has CPUID leaf 0x8000001d.
* QEMU thinks that it can query the host blindly for that
* CPUID leaf if KVM reports that it supports 0x8000001d or
* above. The processor merrily returns values from the
* highest Intel leaf which QEMU tries to use as the guest's
* 0x8000001d. Even worse, this can result in an infinite
* loop if said highest leaf has no subleaves indexed by ECX.
*/
if (static_cpu_has(X86_FEATURE_LFENCE_RDTSC)
|| !static_cpu_has_bug(X86_BUG_NULL_SEG))
if (entry->eax >= 0x8000001d &&
(static_cpu_has(X86_FEATURE_LFENCE_RDTSC)
|| !static_cpu_has_bug(X86_BUG_NULL_SEG)))
entry->eax = max(entry->eax, 0x80000021);
break;
case 0x80000001:

24
arch/x86/kvm/mmu.h
View File

@ -65,6 +65,30 @@ static __always_inline u64 rsvd_bits(int s, int e)
return ((2ULL << (e - s)) - 1) << s;
}
/*
* The number of non-reserved physical address bits irrespective of features
* that repurpose legal bits, e.g. MKTME.
*/
extern u8 __read_mostly shadow_phys_bits;
static inline gfn_t kvm_mmu_max_gfn(void)
{
/*
* Note that this uses the host MAXPHYADDR, not the guest's.
* EPT/NPT cannot support GPAs that would exceed host.MAXPHYADDR;
* assuming KVM is running on bare metal, guest accesses beyond
* host.MAXPHYADDR will hit a #PF(RSVD) and never cause a vmexit
* (either EPT Violation/Misconfig or #NPF), and so KVM will never
* install a SPTE for such addresses. If KVM is running as a VM
* itself, on the other hand, it might see a MAXPHYADDR that is less
* than hardware's real MAXPHYADDR. Using the host MAXPHYADDR
* disallows such SPTEs entirely and simplifies the TDP MMU.
*/
int max_gpa_bits = likely(tdp_enabled) ? shadow_phys_bits : 52;
return (1ULL << (max_gpa_bits - PAGE_SHIFT)) - 1;
}
void kvm_mmu_set_mmio_spte_mask(u64 mmio_value, u64 mmio_mask, u64 access_mask);
void kvm_mmu_set_ept_masks(bool has_ad_bits, bool has_exec_only);

57
arch/x86/kvm/mmu/mmu.c
View File

@ -2804,8 +2804,12 @@ static int host_pfn_mapping_level(struct kvm *kvm, gfn_t gfn, kvm_pfn_t pfn,
const struct kvm_memory_slot *slot)
{
unsigned long hva;
pte_t *pte;
int level;
unsigned long flags;
int level = PG_LEVEL_4K;
pgd_t pgd;
p4d_t p4d;
pud_t pud;
pmd_t pmd;
if (!PageCompound(pfn_to_page(pfn)) && !kvm_is_zone_device_pfn(pfn))
return PG_LEVEL_4K;
@ -2820,10 +2824,43 @@ static int host_pfn_mapping_level(struct kvm *kvm, gfn_t gfn, kvm_pfn_t pfn,
*/
hva = __gfn_to_hva_memslot(slot, gfn);
pte = lookup_address_in_mm(kvm->mm, hva, &level);
if (unlikely(!pte))
return PG_LEVEL_4K;
/*
* Lookup the mapping level in the current mm. The information
* may become stale soon, but it is safe to use as long as
* 1) mmu_notifier_retry was checked after taking mmu_lock, and
* 2) mmu_lock is taken now.
*
* We still need to disable IRQs to prevent concurrent tear down
* of page tables.
*/
local_irq_save(flags);
pgd = READ_ONCE(*pgd_offset(kvm->mm, hva));
if (pgd_none(pgd))
goto out;
p4d = READ_ONCE(*p4d_offset(&pgd, hva));
if (p4d_none(p4d) || !p4d_present(p4d))
goto out;
pud = READ_ONCE(*pud_offset(&p4d, hva));
if (pud_none(pud) || !pud_present(pud))
goto out;
if (pud_large(pud)) {
level = PG_LEVEL_1G;
goto out;
}
pmd = READ_ONCE(*pmd_offset(&pud, hva));
if (pmd_none(pmd) || !pmd_present(pmd))
goto out;
if (pmd_large(pmd))
level = PG_LEVEL_2M;
out:
local_irq_restore(flags);
return level;
}
@ -2992,9 +3029,15 @@ static bool handle_abnormal_pfn(struct kvm_vcpu *vcpu, struct kvm_page_fault *fa
/*
* If MMIO caching is disabled, emulate immediately without
* touching the shadow page tables as attempting to install an
* MMIO SPTE will just be an expensive nop.
* MMIO SPTE will just be an expensive nop. Do not cache MMIO
* whose gfn is greater than host.MAXPHYADDR, any guest that
* generates such gfns is running nested and is being tricked
* by L0 userspace (you can observe gfn > L1.MAXPHYADDR if
* and only if L1's MAXPHYADDR is inaccurate with respect to
* the hardware's).
*/
if (unlikely(!shadow_mmio_value)) {
if (unlikely(!shadow_mmio_value) ||
unlikely(fault->gfn > kvm_mmu_max_gfn())) {
*ret_val = RET_PF_EMULATE;
return true;
}

6
arch/x86/kvm/mmu/spte.h
View File

@ -201,12 +201,6 @@ static inline bool is_removed_spte(u64 spte)
*/
extern u64 __read_mostly shadow_nonpresent_or_rsvd_lower_gfn_mask;
/*
* The number of non-reserved physical address bits irrespective of features
* that repurpose legal bits, e.g. MKTME.
*/
extern u8 __read_mostly shadow_phys_bits;
static inline bool is_mmio_spte(u64 spte)
{
return (spte & shadow_mmio_mask) == shadow_mmio_value &&

15
arch/x86/kvm/mmu/tdp_mmu.c
View File

@ -815,14 +815,15 @@ static inline bool __must_check tdp_mmu_iter_cond_resched(struct kvm *kvm,
return iter->yielded;
}
static inline gfn_t tdp_mmu_max_gfn_host(void)
static inline gfn_t tdp_mmu_max_gfn_exclusive(void)
{
/*
* Bound TDP MMU walks at host.MAXPHYADDR, guest accesses beyond that
* will hit a #PF(RSVD) and never hit an EPT Violation/Misconfig / #NPF,
* and so KVM will never install a SPTE for such addresses.
* Bound TDP MMU walks at host.MAXPHYADDR. KVM disallows memslots with
* a gpa range that would exceed the max gfn, and KVM does not create
* MMIO SPTEs for "impossible" gfns, instead sending such accesses down
* the slow emulation path every time.
*/
return 1ULL << (shadow_phys_bits - PAGE_SHIFT);
return kvm_mmu_max_gfn() + 1;
}
static void __tdp_mmu_zap_root(struct kvm *kvm, struct kvm_mmu_page *root,
@ -830,7 +831,7 @@ static void __tdp_mmu_zap_root(struct kvm *kvm, struct kvm_mmu_page *root,
{
struct tdp_iter iter;
gfn_t end = tdp_mmu_max_gfn_host();
gfn_t end = tdp_mmu_max_gfn_exclusive();
gfn_t start = 0;
for_each_tdp_pte_min_level(iter, root, zap_level, start, end) {
@ -923,7 +924,7 @@ static bool tdp_mmu_zap_leafs(struct kvm *kvm, struct kvm_mmu_page *root,
{
struct tdp_iter iter;
end = min(end, tdp_mmu_max_gfn_host());
end = min(end, tdp_mmu_max_gfn_exclusive());
lockdep_assert_held_write(&kvm->mmu_lock);

8
arch/x86/kvm/x86.c
View File

@ -10020,12 +10020,14 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
if (kvm_check_request(KVM_REQ_HV_CRASH, vcpu)) {
vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
vcpu->run->system_event.type = KVM_SYSTEM_EVENT_CRASH;
vcpu->run->system_event.ndata = 0;
r = 0;
goto out;
}
if (kvm_check_request(KVM_REQ_HV_RESET, vcpu)) {
vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
vcpu->run->system_event.type = KVM_SYSTEM_EVENT_RESET;
vcpu->run->system_event.ndata = 0;
r = 0;
goto out;
}
@ -12009,8 +12011,12 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
struct kvm_memory_slot *new,
enum kvm_mr_change change)
{
if (change == KVM_MR_CREATE || change == KVM_MR_MOVE)
if (change == KVM_MR_CREATE || change == KVM_MR_MOVE) {
if ((new->base_gfn + new->npages - 1) > kvm_mmu_max_gfn())
return -EINVAL;
return kvm_alloc_memslot_metadata(kvm, new);
}
if (change == KVM_MR_FLAGS_ONLY)
memcpy(&new->arch, &old->arch, sizeof(old->arch));

87
arch/x86/lib/copy_user_64.S
View File

@ -53,12 +53,12 @@
SYM_FUNC_START(copy_user_generic_unrolled)
ASM_STAC
cmpl $8,%edx
jb 20f /* less then 8 bytes, go to byte copy loop */
jb .Lcopy_user_short_string_bytes
ALIGN_DESTINATION
movl %edx,%ecx
andl $63,%edx
shrl $6,%ecx
jz .L_copy_short_string
jz copy_user_short_string
1: movq (%rsi),%r8
2: movq 1*8(%rsi),%r9
3: movq 2*8(%rsi),%r10
@ -79,37 +79,11 @@ SYM_FUNC_START(copy_user_generic_unrolled)
leaq 64(%rdi),%rdi
decl %ecx
jnz 1b
.L_copy_short_string:
movl %edx,%ecx
andl $7,%edx
shrl $3,%ecx
jz 20f
18: movq (%rsi),%r8
19: movq %r8,(%rdi)
leaq 8(%rsi),%rsi
leaq 8(%rdi),%rdi
decl %ecx
jnz 18b
20: andl %edx,%edx
jz 23f
movl %edx,%ecx
21: movb (%rsi),%al
22: movb %al,(%rdi)
incq %rsi
incq %rdi
decl %ecx
jnz 21b
23: xor %eax,%eax
ASM_CLAC
RET
jmp copy_user_short_string
30: shll $6,%ecx
addl %ecx,%edx
jmp 60f
40: leal (%rdx,%rcx,8),%edx
jmp 60f
50: movl %ecx,%edx
60: jmp .Lcopy_user_handle_tail /* ecx is zerorest also */
jmp .Lcopy_user_handle_tail
_ASM_EXTABLE_CPY(1b, 30b)
_ASM_EXTABLE_CPY(2b, 30b)
@ -127,10 +101,6 @@ SYM_FUNC_START(copy_user_generic_unrolled)
_ASM_EXTABLE_CPY(14b, 30b)
_ASM_EXTABLE_CPY(15b, 30b)
_ASM_EXTABLE_CPY(16b, 30b)
_ASM_EXTABLE_CPY(18b, 40b)
_ASM_EXTABLE_CPY(19b, 40b)
_ASM_EXTABLE_CPY(21b, 50b)
_ASM_EXTABLE_CPY(22b, 50b)
SYM_FUNC_END(copy_user_generic_unrolled)
EXPORT_SYMBOL(copy_user_generic_unrolled)
@ -191,7 +161,7 @@ EXPORT_SYMBOL(copy_user_generic_string)
SYM_FUNC_START(copy_user_enhanced_fast_string)
ASM_STAC
/* CPUs without FSRM should avoid rep movsb for short copies */
ALTERNATIVE "cmpl $64, %edx; jb .L_copy_short_string", "", X86_FEATURE_FSRM
ALTERNATIVE "cmpl $64, %edx; jb copy_user_short_string", "", X86_FEATURE_FSRM
movl %edx,%ecx
1: rep movsb
xorl %eax,%eax
@ -243,6 +213,53 @@ SYM_CODE_START_LOCAL(.Lcopy_user_handle_tail)
SYM_CODE_END(.Lcopy_user_handle_tail)
/*
* Finish memcpy of less than 64 bytes. #AC should already be set.
*
* Input:
* rdi destination
* rsi source
* rdx count (< 64)
*
* Output:
* eax uncopied bytes or 0 if successful.
*/
SYM_CODE_START_LOCAL(copy_user_short_string)
movl %edx,%ecx
andl $7,%edx
shrl $3,%ecx
jz .Lcopy_user_short_string_bytes
18: movq (%rsi),%r8
19: movq %r8,(%rdi)
leaq 8(%rsi),%rsi
leaq 8(%rdi),%rdi
decl %ecx
jnz 18b
.Lcopy_user_short_string_bytes:
andl %edx,%edx
jz 23f
movl %edx,%ecx
21: movb (%rsi),%al
22: movb %al,(%rdi)
incq %rsi
incq %rdi
decl %ecx
jnz 21b
23: xor %eax,%eax
ASM_CLAC
RET
40: leal (%rdx,%rcx,8),%edx
jmp 60f
50: movl %ecx,%edx /* ecx is zerorest also */
60: jmp .Lcopy_user_handle_tail
_ASM_EXTABLE_CPY(18b, 40b)
_ASM_EXTABLE_CPY(19b, 40b)
_ASM_EXTABLE_CPY(21b, 50b)
_ASM_EXTABLE_CPY(22b, 50b)
SYM_CODE_END(copy_user_short_string)
/*
* copy_user_nocache - Uncached memory copy with exception handling
* This will force destination out of cache for more performance.

4
arch/x86/lib/putuser.S
View File

@ -48,6 +48,7 @@ SYM_FUNC_START(__put_user_1)
cmp %_ASM_BX,%_ASM_CX
jae .Lbad_put_user
SYM_INNER_LABEL(__put_user_nocheck_1, SYM_L_GLOBAL)
ENDBR
ASM_STAC
1: movb %al,(%_ASM_CX)
xor %ecx,%ecx
@ -62,6 +63,7 @@ SYM_FUNC_START(__put_user_2)
cmp %_ASM_BX,%_ASM_CX
jae .Lbad_put_user
SYM_INNER_LABEL(__put_user_nocheck_2, SYM_L_GLOBAL)
ENDBR
ASM_STAC
2: movw %ax,(%_ASM_CX)
xor %ecx,%ecx
@ -76,6 +78,7 @@ SYM_FUNC_START(__put_user_4)
cmp %_ASM_BX,%_ASM_CX
jae .Lbad_put_user
SYM_INNER_LABEL(__put_user_nocheck_4, SYM_L_GLOBAL)
ENDBR
ASM_STAC
3: movl %eax,(%_ASM_CX)
xor %ecx,%ecx
@ -90,6 +93,7 @@ SYM_FUNC_START(__put_user_8)
cmp %_ASM_BX,%_ASM_CX
jae .Lbad_put_user
SYM_INNER_LABEL(__put_user_nocheck_8, SYM_L_GLOBAL)
ENDBR
ASM_STAC
4: mov %_ASM_AX,(%_ASM_CX)
#ifdef CONFIG_X86_32

2
arch/x86/lib/retpoline.S
View File

@ -31,6 +31,7 @@
.align RETPOLINE_THUNK_SIZE
SYM_INNER_LABEL(__x86_indirect_thunk_\reg, SYM_L_GLOBAL)
UNWIND_HINT_EMPTY
ANNOTATE_NOENDBR
ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
__stringify(RETPOLINE \reg), X86_FEATURE_RETPOLINE, \
@ -55,7 +56,6 @@ SYM_INNER_LABEL(__x86_indirect_thunk_\reg, SYM_L_GLOBAL)
.align RETPOLINE_THUNK_SIZE
SYM_CODE_START(__x86_indirect_thunk_array)
ANNOTATE_NOENDBR // apply_retpolines
#define GEN(reg) THUNK reg
#include <asm/GEN-for-each-reg.h>

Some files were not shown because too many files have changed in this diff Show More