mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
If the regulator is enabled on boot (checked using regulator_is_enabled), invoke regulator_enable() so that the usecount reflects the correct state of the regulator and then disable the regulator so that the initial state of the regulator is disabled. Avoid using ->set_power, since set_power also takes care of setting the voltages which is not needed at this point. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
97fe7e5ab6
commit
c8518efa6d
|
@ -409,6 +409,59 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (!reg)
|
||||
return 0;
|
||||
|
||||
if (regulator_is_enabled(reg)) {
|
||||
ret = regulator_enable(reg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regulator_disable(reg);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
|
||||
{
|
||||
struct mmc_host *mmc = host->mmc;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* disable regulators enabled during boot and get the usecount
|
||||
* right so that regulators can be enabled/disabled by checking
|
||||
* the return value of regulator_is_enabled
|
||||
*/
|
||||
ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
|
||||
if (ret) {
|
||||
dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
|
||||
if (ret) {
|
||||
dev_err(host->dev,
|
||||
"fail to disable boot enabled vmmc_aux reg\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = omap_hsmmc_disable_boot_regulator(host->pbias);
|
||||
if (ret) {
|
||||
dev_err(host->dev,
|
||||
"failed to disable boot enabled pbias reg\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
||||
{
|
||||
int ocr_value = 0;
|
||||
|
@ -456,17 +509,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
|||
/* For eMMC do not power off when not in sleep state */
|
||||
if (mmc_pdata(host)->no_regulator_off_init)
|
||||
return 0;
|
||||
/*
|
||||
* To disable boot_on regulator, enable regulator
|
||||
* to increase usecount and then disable it.
|
||||
*/
|
||||
if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
|
||||
(mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
|
||||
int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
|
||||
|
||||
omap_hsmmc_set_power(host->dev, 1, vdd);
|
||||
omap_hsmmc_set_power(host->dev, 0, 0);
|
||||
}
|
||||
ret = omap_hsmmc_disable_boot_regulators(host);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue