diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 189e42674d85..010fe29a4888 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -228,6 +228,7 @@ #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ +#define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */ #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ @@ -1881,6 +1882,7 @@ static int hs400_tune_response(struct mmc_host *mmc, u32 opcode) /* select EMMC50 PAD CMD tune */ sdr_set_bits(host->base + PAD_CMD_TUNE, BIT(0)); + sdr_set_field(host->base + MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMDTA, 2); if (mmc->ios.timing == MMC_TIMING_MMC_HS200 || mmc->ios.timing == MMC_TIMING_UHS_SDR104) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index b75c82d8d6c1..3d0bb5e2e09b 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -99,7 +99,7 @@ #define CORE_PWRSAVE_DLL BIT(3) -#define DDR_CONFIG_POR_VAL 0x80040853 +#define DDR_CONFIG_POR_VAL 0x80040873 #define INVALID_TUNING_PHASE -1 @@ -148,8 +148,9 @@ struct sdhci_msm_offset { u32 core_ddr_200_cfg; u32 core_vendor_spec3; u32 core_dll_config_2; + u32 core_dll_config_3; + u32 core_ddr_config_old; /* Applicable to sdcc minor ver < 0x49 */ u32 core_ddr_config; - u32 core_ddr_config_2; }; static const struct sdhci_msm_offset sdhci_msm_v5_offset = { @@ -177,8 +178,8 @@ static const struct sdhci_msm_offset sdhci_msm_v5_offset = { .core_ddr_200_cfg = 0x224, .core_vendor_spec3 = 0x250, .core_dll_config_2 = 0x254, - .core_ddr_config = 0x258, - .core_ddr_config_2 = 0x25c, + .core_dll_config_3 = 0x258, + .core_ddr_config = 0x25c, }; static const struct sdhci_msm_offset sdhci_msm_mci_offset = { @@ -207,8 +208,8 @@ static const struct sdhci_msm_offset sdhci_msm_mci_offset = { .core_ddr_200_cfg = 0x184, .core_vendor_spec3 = 0x1b0, .core_dll_config_2 = 0x1b4, - .core_ddr_config = 0x1b8, - .core_ddr_config_2 = 0x1bc, + .core_ddr_config_old = 0x1b8, + .core_ddr_config = 0x1bc, }; struct sdhci_msm_variant_ops { @@ -253,6 +254,7 @@ struct sdhci_msm_host { const struct sdhci_msm_offset *offset; bool use_cdr; u32 transfer_mode; + bool updated_ddr_cfg; }; static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host) @@ -924,8 +926,10 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host) static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host) { struct mmc_host *mmc = host->mmc; - u32 dll_status, config; + u32 dll_status, config, ddr_cfg_offset; int ret; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); const struct sdhci_msm_offset *msm_offset = sdhci_priv_msm_offset(host); @@ -938,8 +942,11 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host) * bootloaders. In the future, if this changes, then the desired * values will need to be programmed appropriately. */ - writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + - msm_offset->core_ddr_config); + if (msm_host->updated_ddr_cfg) + ddr_cfg_offset = msm_offset->core_ddr_config; + else + ddr_cfg_offset = msm_offset->core_ddr_config_old; + writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + ddr_cfg_offset); if (mmc->ios.enhanced_strobe) { config = readl_relaxed(host->ioaddr + @@ -1899,6 +1906,9 @@ static int sdhci_msm_probe(struct platform_device *pdev) msm_offset->core_vendor_spec_capabilities0); } + if (core_major == 1 && core_minor >= 0x49) + msm_host->updated_ddr_cfg = true; + /* * Power on reset state may trigger power irq if previous status of * PWRCTL was either BUS_ON or IO_HIGH_V. So before enabling pwr irq diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 5cca3fa4610b..500f70a6ee42 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -80,6 +80,7 @@ struct sdhci_esdhc { bool quirk_tuning_erratum_type1; bool quirk_tuning_erratum_type2; bool quirk_ignore_data_inhibit; + bool quirk_delay_before_data_reset; bool in_sw_tuning; unsigned int peripheral_clock; const struct esdhc_clk_fixup *clk_fixup; @@ -759,14 +760,16 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask) struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); u32 val; + if (esdhc->quirk_delay_before_data_reset && + (mask & SDHCI_RESET_DATA) && + (host->flags & SDHCI_REQ_USE_DMA)) + mdelay(5); + sdhci_reset(host, mask); sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); - if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) - mdelay(5); - if (mask & SDHCI_RESET_ALL) { val = sdhci_readl(host, ESDHC_TBCTL); val &= ~ESDHC_TB_EN; @@ -1221,6 +1224,10 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) if (match) esdhc->clk_fixup = match->data; np = pdev->dev.of_node; + + if (of_device_is_compatible(np, "fsl,p2020-esdhc")) + esdhc->quirk_delay_before_data_reset = true; + clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { /* @@ -1303,8 +1310,8 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) { - host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST; - host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST; + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; } if (of_device_is_compatible(np, "fsl,p5040-esdhc") || diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index acefb76b4e15..5091e2c1c0e5 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef CONFIG_X86 #include @@ -783,11 +784,18 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) return 0; } +static bool glk_broken_cqhci(struct sdhci_pci_slot *slot) +{ + return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_EMMC && + dmi_match(DMI_BIOS_VENDOR, "LENOVO"); +} + static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot) { int ret = byt_emmc_probe_slot(slot); - slot->host->mmc->caps2 |= MMC_CAP2_CQE; + if (!glk_broken_cqhci(slot)) + slot->host->mmc->caps2 |= MMC_CAP2_CQE; if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) { slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES, diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 3140fe2e5dba..1b1c26da3fe0 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1882,9 +1882,7 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing) ctrl_2 |= SDHCI_CTRL_UHS_SDR104; else if (timing == MMC_TIMING_UHS_SDR12) ctrl_2 |= SDHCI_CTRL_UHS_SDR12; - else if (timing == MMC_TIMING_SD_HS || - timing == MMC_TIMING_MMC_HS || - timing == MMC_TIMING_UHS_SDR25) + else if (timing == MMC_TIMING_UHS_SDR25) ctrl_2 |= SDHCI_CTRL_UHS_SDR25; else if (timing == MMC_TIMING_UHS_SDR50) ctrl_2 |= SDHCI_CTRL_UHS_SDR50; @@ -2419,8 +2417,8 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) sdhci_send_tuning(host, opcode); if (!host->tuning_done) { - pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", - mmc_hostname(host->mmc)); + pr_debug("%s: Tuning timeout, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); sdhci_abort_tuning(host, opcode); return -ETIMEDOUT; } @@ -3769,6 +3767,9 @@ int sdhci_setup_host(struct sdhci_host *host) mmc_hostname(mmc), host->version); } + if (host->quirks & SDHCI_QUIRK_BROKEN_CQE) + mmc->caps2 &= ~MMC_CAP2_CQE; + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; else if (!(host->caps & SDHCI_CAN_DO_SDMA)) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0ed3e0eaef5f..fe83ece6965b 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -409,6 +409,8 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) /* Controller reports inverted write-protect state */ #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) +/* Controller has unusable command queue engine */ +#define SDHCI_QUIRK_BROKEN_CQE (1<<17) /* Controller does not like fast PIO transfers */ #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) /* Controller does not have a LED */