ASoC: codecs: ak4104: move to GPIO consumer API
Get the reset GPIO through the GPIO consumer API. This allows specifying the DT property as "reset-gpios" without breaking existing DT users. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
db097f95b4
commit
d8f2c8592b
|
@ -13,7 +13,7 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <sound/asoundef.h>
|
||||
#include <sound/core.h>
|
||||
|
@ -268,8 +268,8 @@ static const struct regmap_config ak4104_regmap = {
|
|||
|
||||
static int ak4104_spi_probe(struct spi_device *spi)
|
||||
{
|
||||
struct device_node *np = spi->dev.of_node;
|
||||
struct ak4104_private *ak4104;
|
||||
struct gpio_desc *reset_gpiod;
|
||||
unsigned int val;
|
||||
int ret;
|
||||
|
||||
|
@ -297,19 +297,11 @@ static int ak4104_spi_probe(struct spi_device *spi)
|
|||
return ret;
|
||||
}
|
||||
|
||||
if (np) {
|
||||
enum of_gpio_flags flags;
|
||||
int gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
|
||||
|
||||
if (gpio_is_valid(gpio)) {
|
||||
ret = devm_gpio_request_one(&spi->dev, gpio,
|
||||
flags & OF_GPIO_ACTIVE_LOW ?
|
||||
GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
|
||||
"ak4104 reset");
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
reset_gpiod = devm_gpiod_get_optional(&spi->dev, "reset",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(reset_gpiod) &&
|
||||
PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
|
||||
return -EPROBE_DEFER;
|
||||
|
||||
/* read the 'reserved' register - according to the datasheet, it
|
||||
* should contain 0x5b. Not a good way to verify the presence of
|
||||
|
|
Loading…
Reference in New Issue