Bluetooth: Style fix - align block comments

Fixed alignment of all block comments.
Found using checkpatch

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/ath3k.c

@@ -140,7 +140,8 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
 
 #define BTUSB_ATH3012		0x80
 /* This table is to load patch and sysconfig files
- * for AR3012 */
+ * for AR3012
+ */
 static const struct usb_device_id ath3k_blist_tbl[] = {
 
 	/* Atheros AR3012 with sflash firmware*/

drivers/bluetooth/bt3c_cs.c

@@ -684,14 +684,16 @@ static int bt3c_config(struct pcmcia_device *link)
 	unsigned long try;
 
 	/* First pass: look for a config entry that looks normal.
-	   Two tries: without IO aliases, then with aliases */
+	 * Two tries: without IO aliases, then with aliases
+	 */
 	for (try = 0; try < 2; try++)
 		if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
 			goto found_port;
 
 	/* Second pass: try to find an entry that isn't picky about
-	   its base address, then try to grab any standard serial port
-	   address, and finally try to get any free port. */
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
 	if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
 		goto found_port;
 

drivers/bluetooth/btmrvl_sdio.c

@@ -1455,7 +1455,8 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
 	fw_dump_ptr = fw_dump_data;
 
 	/* Dump all the memory data into single file, a userspace script will
-	   be used to split all the memory data to multiple files*/
+	 * be used to split all the memory data to multiple files
+	 */
 	BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
 	for (idx = 0; idx < dump_num; idx++) {
 		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
@@ -1482,7 +1483,8 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
 	}
 
 	/* fw_dump_data will be free in device coredump release function
-	   after 5 min*/
+	 * after 5 min
+	 */
 	dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
 	BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
 }

drivers/bluetooth/btsdio.c

@@ -144,7 +144,8 @@ static int btsdio_rx_packet(struct btsdio_data *data)
 	if (!skb) {
 		/* Out of memory. Prepare a read retry and just
 		 * return with the expectation that the next time
-		 * we're called we'll have more memory. */
+		 * we're called we'll have more memory.
+		 */
 		return -ENOMEM;
 	}
 

drivers/bluetooth/btuart_cs.c

@@ -614,14 +614,16 @@ static int btuart_config(struct pcmcia_device *link)
 	int try;
 
 	/* First pass: look for a config entry that looks normal.
-	   Two tries: without IO aliases, then with aliases */
+	 * Two tries: without IO aliases, then with aliases
+	 */
 	for (try = 0; try < 2; try++)
 		if (!pcmcia_loop_config(link, btuart_check_config, &try))
 			goto found_port;
 
 	/* Second pass: try to find an entry that isn't picky about
-	   its base address, then try to grab any standard serial port
-	   address, and finally try to get any free port. */
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
 	if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
 		goto found_port;
 

drivers/bluetooth/btusb.c

@@ -657,7 +657,8 @@ static void btusb_intr_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -746,7 +747,8 @@ static void btusb_bulk_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -841,7 +843,8 @@ static void btusb_isoc_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -953,7 +956,8 @@ static void btusb_diag_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -2897,7 +2901,8 @@ static int btusb_probe(struct usb_interface *intf,
 		struct usb_device *udev = interface_to_usbdev(intf);
 
 		/* Old firmware would otherwise let ath3k driver load
-		 * patch and sysconfig files */
+		 * patch and sysconfig files
+		 */
 		if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
 			return -ENODEV;
 	}

drivers/bluetooth/btwilink.c

@@ -93,8 +93,7 @@ static void st_reg_completion_cb(void *priv_data, int data)
 	complete(&lhst->wait_reg_completion);
 }
 
-/* Called by Shared Transport layer when receive data is
- * available */
+/* Called by Shared Transport layer when receive data is available */
 static long st_receive(void *priv_data, struct sk_buff *skb)
 {
 	struct ti_st *lhst = priv_data;
@@ -198,7 +197,8 @@ static int ti_st_open(struct hci_dev *hdev)
 		}
 
 		/* Is ST registration callback
-		 * called with ERROR status? */
+		 * called with ERROR status?
+		 */
 		if (hst->reg_status != 0) {
 			BT_ERR("ST registration completed with invalid "
 					"status %d", hst->reg_status);

drivers/bluetooth/hci_ldisc.c

@@ -457,7 +457,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	BT_DBG("tty %p", tty);
 
 	/* Error if the tty has no write op instead of leaving an exploitable
-	   hole */
+	 * hole
+	 */
 	if (tty->ops->write == NULL)
 		return -EOPNOTSUPP;
 

drivers/bluetooth/hci_ll.c

@@ -622,7 +622,8 @@ static int download_firmware(struct ll_device *lldev)
 			cmd = (struct hci_command *)action_ptr;
 			if (cmd->opcode == 0xff36) {
 				/* ignore remote change
-				 * baud rate HCI VS command */
+				 * baud rate HCI VS command
+				 */
 				bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
 				break;
 			}