From dc897926c95b258eff6989cc2017643352e36786 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Sun, 12 Jan 2014 15:22:48 +0200 Subject: [PATCH] ARM: dts: cm-t3x: add gpio-led pinmux GPIO186 is used for the heartbeat led. Setup the pinmux for the GPIO186. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 842201c235e6..abda4939c0b3 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -11,6 +11,8 @@ memory { leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&green_led_pins>; ledb { label = "cm-t3x:green"; gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */ @@ -38,6 +40,12 @@ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_da OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; + + green_led_pins: pinmux_green_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */ + >; + }; }; &uart3 {