From 2d6ebaa98be1dd265aa6d99a00c150f1f9f2ea66 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:18 +0200 Subject: [PATCH 01/23] arm64: dts: marvell: Enumerate the first AP806 syscon There are two system controllers in the AP80x, like for ap_syscon1, enumerate the first one by renaming it s/ap_syscon/ap_syscon0/. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index d06dd198f2c7..a23ddd46efc5 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -246,7 +246,7 @@ ap_sdhci0: sdhci@6e0000 { status = "disabled"; }; - ap_syscon: system-controller@6f4000 { + ap_syscon0: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; reg = <0x6f4000 0x2000>; From e231c6d47cca4b5df51bcf72dec1af767e63feaf Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:19 +0200 Subject: [PATCH 02/23] arm64: dts: marvell: Add AP806-dual missing CPU clocks CPU clocks have been added to AP806-quad but not to the -dual variant. Fixes: c00bc38354cf ("arm64: dts: marvell: Add cpu clock node on Armada 7K/8K") Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 9024a2d9db07..62ae016ee6aa 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -21,6 +21,7 @@ cpu0: cpu@0 { reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +29,7 @@ cpu1: cpu@1 { reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; }; }; }; From 2537831bbc19bbc797366d72a5a71c4383d64c8b Mon Sep 17 00:00:00 2001 From: Ben Peled Date: Fri, 4 Oct 2019 16:27:20 +0200 Subject: [PATCH 03/23] dt-bindings: ap80x: replace AP806 with AP80x Rename the text file and update "AP806" into "AP806/AP807" where relevant. Signed-off-by: Ben Peled Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Signed-off-by: Gregory CLEMENT --- ...-controller.txt => ap80x-system-controller.txt} | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) rename Documentation/devicetree/bindings/arm/marvell/{ap806-system-controller.txt => ap80x-system-controller.txt} (91%) diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt similarity index 91% rename from Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt rename to Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt index 26410fbb85be..098d932fc963 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt @@ -1,15 +1,15 @@ -Marvell Armada AP806 System Controller +Marvell Armada AP80x System Controller ====================================== -The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K -SoCs. It contains system controllers, which provide several registers -giving access to numerous features: clocks, pin-muxing and many other -SoC configuration items. This DT binding allows to describe these -system controllers. +The AP806/AP807 is one of the two core HW blocks of the Marvell Armada +7K/8K/931x SoCs. It contains system controllers, which provide several +registers giving access to numerous features: clocks, pin-muxing and +many other SoC configuration items. This DT binding allows to describe +these system controllers. For the top level node: - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the AP806 system controller + - reg: register area of the AP80x system controller SYSTEM CONTROLLER 0 =================== From ad7fd0e8038c9339499a52472595157000e818c7 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:21 +0200 Subject: [PATCH 04/23] MAINTAINERS: Add new Marvell CN9130-based files to track Marvell has a new branch of products called CN9130 based on AP807 and CP115 which are derivatives of the currently supported AP806 and CP110. Update the MAINTAINERS entry to reflect this change in the naming. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 296de2b51c83..6b53cd42ae48 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1897,7 +1897,7 @@ F: arch/arm/boot/dts/dove* F: arch/arm/boot/dts/orion5x* T: git git://git.infradead.org/linux-mvebu.git -ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support +ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SOC support M: Jason Cooper M: Andrew Lunn M: Gregory Clement @@ -1909,6 +1909,7 @@ F: arch/arm/boot/dts/kirkwood* F: arch/arm/configs/mvebu_*_defconfig F: arch/arm/mach-mvebu/ F: arch/arm64/boot/dts/marvell/armada* +F: arch/arm64/boot/dts/marvell/cn913* F: drivers/cpufreq/armada-37xx-cpufreq.c F: drivers/cpufreq/armada-8k-cpufreq.c F: drivers/cpufreq/mvebu-cpufreq.c From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00 2001 From: Konstantin Porotchkin Date: Fri, 4 Oct 2019 16:27:22 +0200 Subject: [PATCH 05/23] arm64: dts: marvell: Prepare the introduction of AP807 based SoCs Prepare the support for Marvell AP807 die. This die is very similar to AP806 but uses different DDR PHY. AP807 is a major component of CN9130 SoC series. Signed-off-by: Konstantin Porotchkin Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +---------------- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456 ++++++++++++++++++ 2 files changed, 458 insertions(+), 446 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index a23ddd46efc5..cdadb28f287e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -5,454 +5,10 @@ * Device Tree file for Marvell Armada AP806. */ -#include -#include - -/dts-v1/; +#define AP_NAME ap806 +#include "armada-ap80x.dtsi" / { model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - gpio0 = &ap_gpio; - spi0 = &spi0; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * This area matches the mapping done with a - * mainline U-Boot, and should be updated by the - * bootloader. - */ - - psci-area@4000000 { - reg = <0x0 0x4000000 0x0 0x200000>; - no-map; - }; - }; - - ap806 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - config-space@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf0000000 0x1000000>; - - gic: interrupt-controller@210000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-controller; - interrupts = ; - reg = <0x210000 0x10000>, - <0x220000 0x20000>, - <0x240000 0x20000>, - <0x260000 0x20000>; - - gic_v2m0: v2m@280000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x280000 0x1000>; - arm,msi-base-spi = <160>; - arm,msi-num-spis = <32>; - }; - gic_v2m1: v2m@290000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x290000 0x1000>; - arm,msi-base-spi = <192>; - arm,msi-num-spis = <32>; - }; - gic_v2m2: v2m@2a0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2a0000 0x1000>; - arm,msi-base-spi = <224>; - arm,msi-num-spis = <32>; - }; - gic_v2m3: v2m@2b0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2b0000 0x1000>; - arm,msi-base-spi = <256>; - arm,msi-num-spis = <32>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - pmu { - compatible = "arm,cortex-a72-pmu"; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - - odmi: odmi@300000 { - compatible = "marvell,odmi-controller"; - interrupt-controller; - msi-controller; - marvell,odmi-frames = <4>; - reg = <0x300000 0x4000>, - <0x304000 0x4000>, - <0x308000 0x4000>, - <0x30C000 0x4000>; - marvell,spi-base = <128>, <136>, <144>, <152>; - }; - - gicp: gicp@3f0040 { - compatible = "marvell,ap806-gicp"; - reg = <0x3f0040 0x10>; - marvell,spi-ranges = <64 64>, <288 64>; - msi-controller; - }; - - pic: interrupt-controller@3f0100 { - compatible = "marvell,armada-8k-pic"; - reg = <0x3f0100 0x10>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts = ; - }; - - sei: interrupt-controller@3f0200 { - compatible = "marvell,ap806-sei"; - reg = <0x3f0200 0x40>; - interrupts = ; - #interrupt-cells = <1>; - interrupt-controller; - msi-controller; - }; - - xor@400000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x400000 0x1000>, - <0x410000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@420000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x420000 0x1000>, - <0x430000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@440000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x440000 0x1000>, - <0x450000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@460000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x460000 0x1000>, - <0x470000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - spi0: spi@510600 { - compatible = "marvell,armada-380-spi"; - reg = <0x510600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - i2c0: i2c@511000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x511000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - timeout-ms = <1000>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart0: serial@512000 { - compatible = "snps,dw-apb-uart"; - reg = <0x512000 0x100>; - reg-shift = <2>; - interrupts = ; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart1: serial@512100 { - compatible = "snps,dw-apb-uart"; - reg = <0x512100 0x100>; - reg-shift = <2>; - interrupts = ; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - - }; - - watchdog: watchdog@610000 { - compatible = "arm,sbsa-gwdt"; - reg = <0x610000 0x1000>, <0x600000 0x1000>; - interrupts = ; - }; - - ap_sdhci0: sdhci@6e0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0x6e0000 0x300>; - interrupts = ; - clock-names = "core"; - clocks = <&ap_clk 4>; - dma-coherent; - marvell,xenon-phy-slow-mode; - status = "disabled"; - }; - - ap_syscon0: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x2000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - - uart0_pins: uart0-pins { - marvell,pins = "mpp11", "mpp19"; - marvell,function = "uart0"; - }; - }; - - ap_gpio: gpio@1040 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <20>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 20>; - }; - }; - - ap_syscon1: system-controller@6f8000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; - - ap_thermal: thermal-sensor@80 { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x80 0x10>; - interrupt-parent = <&sei>; - interrupts = <18>; - #thermal-sensor-cells = <1>; - }; - }; - }; - }; - - /* - * The thermal IP features one internal sensor plus, if applicable, one - * remote channel wired to one sensor per CPU. - * - * Only one thermal zone per AP/CP may trigger interrupts at a time, the - * first one that will have a critical trip point will be chosen. - */ - thermal-zones { - ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&ap_thermal 0>; - - trips { - ap_crit: ap-crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - - ap_thermal_cpu0: ap-thermal-cpu0 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 1>; - - trips { - cpu0_hot: cpu0-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_emerg: cpu0-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0_hot: map0-hot { - trip = <&cpu0_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map0_emerg: map0-ermerg { - trip = <&cpu0_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu1: ap-thermal-cpu1 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 2>; - - trips { - cpu1_hot: cpu1-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu1_emerg: cpu1-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map1_hot: map1-hot { - trip = <&cpu1_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map1_emerg: map1-emerg { - trip = <&cpu1_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu2: ap-thermal-cpu2 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 3>; - - trips { - cpu2_hot: cpu2-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_emerg: cpu2-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map2_hot: map2-hot { - trip = <&cpu2_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map2_emerg: map2-emerg { - trip = <&cpu2_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; - - ap_thermal_cpu3: ap-thermal-cpu3 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 4>; - - trips { - cpu3_hot: cpu3-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu3_emerg: cpu3-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map3_hot: map3-bhot { - trip = <&cpu3_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map3_emerg: map3-emerg { - trip = <&cpu3_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi new file mode 100644 index 000000000000..0dc1365e5758 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP80x. + */ + +#include +#include + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + gpio0 = &ap_gpio; + spi0 = &spi0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + + AP_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = ; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = ; + }; + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = ; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + timeout-ms = <1000>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + + }; + + watchdog: watchdog@610000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = ; + }; + + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = ; + clock-names = "core"; + clocks = <&ap_clk 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + + ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; + + ap_gpio: gpio@1040 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 20>; + }; + }; + + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&ap_thermal 0>; + + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + + ap_thermal_cpu0: ap-thermal-cpu0 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + }; +}; From 4f267f2a806b556678b84c4d80c2f4bff8d000d9 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:23 +0200 Subject: [PATCH 06/23] arm64: dts: marvell: Move clocks to AP806 specific file Regular clocks and CPU clocks are specific to AP806, move them out of the generic AP80x file so that AP807 can use its own clocks. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------ 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index cdadb28f287e..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -12,3 +12,19 @@ / { model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; }; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 0dc1365e5758..e7438c21ccee 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -248,11 +248,6 @@ ap_syscon0: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; reg = <0x6f4000 0x2000>; - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - ap_pinctrl: pinctrl { compatible = "marvell,ap806-pinctrl"; @@ -278,13 +273,6 @@ ap_syscon1: system-controller@6f8000 { #address-cells = <1>; #size-cells = <1>; - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; - ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; From e1e42ae4ca2a3f16b0f9da4149e3e2f5fe169e6d Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:33 +0200 Subject: [PATCH 07/23] dt-bindings: marvell: Convert the SoC compatibles description to YAML Convert the file detailing Marvell EBU compatibles to json-schema. Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Signed-off-by: Gregory CLEMENT --- .../bindings/arm/marvell/armada-7k-8k.txt | 24 ----------- .../bindings/arm/marvell/armada-7k-8k.yaml | 40 +++++++++++++++++++ 2 files changed, 40 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt deleted file mode 100644 index df98a9c82a8c..000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt +++ /dev/null @@ -1,24 +0,0 @@ -Marvell Armada 7K/8K Platforms Device Tree Bindings ---------------------------------------------------- - -Boards using a SoC of the Marvell Armada 7K or 8K families must carry -the following root node property: - - - compatible, with one of the following values: - - - "marvell,armada7020", "marvell,armada-ap806-dual", "marvell,armada-ap806" - when the SoC being used is the Armada 7020 - - - "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806" - when the SoC being used is the Armada 7040 - - - "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806" - when the SoC being used is the Armada 8020 - - - "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806" - when the SoC being used is the Armada 8040 - -Example: - -compatible = "marvell,armada7040-db", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml new file mode 100644 index 000000000000..294595e00028 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR X11) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 7K/8K Platforms Device Tree Bindings + +maintainers: + - Gregory CLEMENT + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: Armada 7020 SoC + items: + - const: marvell,armada7020 + - const: marvell,armada-ap806-dual + - const: marvell,armada-ap806 + + - description: Armada 7040 SoC + items: + - const: marvell,armada7040 + - const: marvell,armada-ap806-quad + - const: marvell,armada-ap806 + + - description: Armada 8020 SoC + items: + - const: marvell,armada8020 + - const: marvell,armada-ap806-dual + - const: marvell,armada-ap806 + + - description: Armada 8040 SoC + items: + - const: marvell,armada8040 + - const: marvell,armada-ap806-quad + - const: marvell,armada-ap806 From 6a380172f171d81259e90ddc99d25fec20e56e1e Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:34 +0200 Subject: [PATCH 08/23] dt-bindings: marvell: Declare the CN913x SoC compatibles Describe the compatible properties for the new Marvell SoCs: * CN9130: 1x AP807-quad + 1x CP115 (1x embedded) * CN9131: 1x AP807-quad + 2x CP115 (1x embedded + 1x modular) * CN9132: 1x AP807-quad + 3x CP115 (1x embedded + 2x modular) CP115 are similar to CP110 in terms of features. There are three development boards based on these SoCs: * CN9130-DB: comes as a single mother board (with the CP115 bundled) * CN9131-DB: same as CN9130-DB with one additional modular CP115 * CN9132-DB: same as CN9130-DB with two additional modular CP115 Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Signed-off-by: Gregory CLEMENT --- .../bindings/arm/marvell/armada-7k-8k.yaml | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index 294595e00028..a9828c50c0fb 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -38,3 +38,24 @@ properties: - const: marvell,armada8040 - const: marvell,armada-ap806-quad - const: marvell,armada-ap806 + + - description: Armada CN9130 SoC with no external CP + items: + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: Armada CN9131 SoC with one external CP + items: + - const: marvell,cn9131 + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: Armada CN9132 SoC with two external CPs + items: + - const: marvell,cn9132 + - const: marvell,cn9131 + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 From cbafcad0641e99831ff7c57ac8f79aed502f33e5 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:24 +0200 Subject: [PATCH 09/23] arm64: dts: marvell: Add support for AP807/AP807-quad Describe AP807 and AP807-quad support. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- .../boot/dts/marvell/armada-ap807-quad.dtsi | 51 +++++++++++++++++++ arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 +++++++++++ 2 files changed, 80 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi new file mode 100644 index 000000000000..65364691257d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 Quad + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#include "armada-ap807.dtsi" + +/ { + model = "Marvell Armada AP807 Quad"; + compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi new file mode 100644 index 000000000000..623010f3ca89 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#define AP_NAME ap807 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP807"; + compatible = "marvell,armada-ap807"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap807-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu { + compatible = "marvell,ap807-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +}; From ddda843324f7d9a730fefcbefae3a575eb1a1bdf Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:25 +0200 Subject: [PATCH 10/23] arm64: dts: marvell: Add AP806-dual cache description Adding appropriate entries to device-tree allows the cache description to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/. Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- .../boot/dts/marvell/armada-ap806-dual.dtsi | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 62ae016ee6aa..09849558a776 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -22,6 +22,13 @@ cpu0: cpu@0 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -30,6 +37,20 @@ cpu1: cpu@1 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; From 760cabcd6ad23956542f953e5a617a8e0a81a792 Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:26 +0200 Subject: [PATCH 11/23] arm64: dts: marvell: Add AP806-quad cache description Adding appropriate entries to device-tree allows the cache description to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/. Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- .../boot/dts/marvell/armada-ap806-quad.dtsi | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index c25bc65727b5..3db427122f9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -22,6 +22,13 @@ cpu0: cpu@0 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -30,6 +37,13 @@ cpu1: cpu@1 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -38,6 +52,13 @@ cpu2: cpu@100 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -46,6 +67,27 @@ cpu3: cpu@101 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; From 30d53abdc60a6515f02f181e7c39b7b23d5fb3aa Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:27 +0200 Subject: [PATCH 12/23] arm64: dts: marvell: Add AP807-quad cache description Adding appropriate entries to device-tree allows the cache description to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/. Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- .../boot/dts/marvell/armada-ap807-quad.dtsi | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi index 65364691257d..840466e143b4 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -22,6 +22,13 @@ cpu0: cpu@0 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -30,6 +37,13 @@ cpu1: cpu@1 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -38,6 +52,13 @@ cpu2: cpu@100 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -46,6 +67,27 @@ cpu3: cpu@101 { enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; From 2bc26088ba37d4f2a4b8bd813ee757992522d082 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:28 +0200 Subject: [PATCH 13/23] arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment Fix this tiny typo before renaming/changing this file. Fixes: 72a3713fadfd ("arm64: dts: marvell: de-duplicate CP110 description") Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index d81944902650..8259fc8f86f2 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -438,10 +438,10 @@ CP110_LABEL(uart3): serial@702300 { CP110_LABEL(nand_controller): nand@720000 { /* - * Due to the limitation of the pins available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ compatible = "marvell,armada-8k-nand-controller", "marvell,armada370-nand-controller"; reg = <0x720000 0x54>; From 47cf40af64c35a69ef6a193c47768ad1bda29db2 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:29 +0200 Subject: [PATCH 14/23] arm64: dts: marvell: Prepare the introduction of CP115 CP110 and CP115 are almost the same in terms of features and have a very limited set of differences. Let's create an armada-cp11x.dtsi file which will be used to instantiate both CP110 and CP115 nodes. The only changes between the two armada-cp11{0,x}.dtsi files are the following naming in macros: s/CP110/CP11X/. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 28 +- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 56 +- .../arm64/boot/dts/marvell/armada-common.dtsi | 4 +- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +---------------- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 579 ++++++++++++++++++ 5 files changed, 627 insertions(+), 615 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index e5c6d7c25819..4e78ccd207b7 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -17,23 +17,23 @@ aliases { /* * Instantiate the CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIE_IO_BASE 0xf9000000 +#define CP11X_PCIE_MEM_BASE 0xf6000000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIE_IO_BASE +#undef CP11X_PCIE_MEM_BASE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE &cp0_gpio1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 8129b40f12a4..ebb98836ec9c 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -19,44 +19,44 @@ aliases { /* * Instantiate the master CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIE_IO_BASE 0xf9000000 +#define CP11X_PCIE_MEM_BASE 0xf6000000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIE_IO_BASE +#undef CP11X_PCIE_MEM_BASE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* * Instantiate the slave CP110 */ -#define CP110_NAME cp1 -#define CP110_BASE f4000000 -#define CP110_PCIE_IO_BASE 0xfd000000 -#define CP110_PCIE_MEM_BASE 0xfa000000 -#define CP110_PCIE0_BASE f4600000 -#define CP110_PCIE1_BASE f4620000 -#define CP110_PCIE2_BASE f4640000 +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIE_IO_BASE 0xfd000000 +#define CP11X_PCIE_MEM_BASE 0xfa000000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIE_IO_BASE +#undef CP11X_PCIE_MEM_BASE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* The 80x0 has two CP blocks, but uses only one block from each. */ &cp1_gpio1 { diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index b29c6405d214..c04c6c475022 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -6,6 +6,6 @@ /* Common definitions used by Armada 7K/8K DTs */ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) -#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) -#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) +#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) +#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 8259fc8f86f2..4fd33b0fa56e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,579 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2019 Marvell Technology Group Ltd. * * Device Tree file for Marvell Armada CP110. */ -#include -#include +#define CP11X_TYPE cp110 -#include "armada-common.dtsi" +#include "armada-cp11x.dtsi" -#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) -#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) -#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) - -/ { - /* - * The contents of the node are defined below, in order to - * save one indentation level - */ - CP110_NAME: CP110_NAME { }; - - /* - * CPs only have one sensor in the thermal IC. - * - * The cooling maps are empty as there are no cooling devices. - */ - thermal-zones { - CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&CP110_LABEL(thermal) 0>; - - trips { - CP110_LABEL(crit): crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - }; -}; - -&CP110_NAME { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu_nsr)>; - ranges; - - config-space@CP110_BASE { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; - - CP110_LABEL(ethernet): ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "mg_core_clk", "axi_clk"; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - dma-coherent; - - CP110_LABEL(eth0): eth0 { - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <51 IRQ_TYPE_LEVEL_HIGH>, - <55 IRQ_TYPE_LEVEL_HIGH>, - <59 IRQ_TYPE_LEVEL_HIGH>, - <63 IRQ_TYPE_LEVEL_HIGH>, - <67 IRQ_TYPE_LEVEL_HIGH>, - <71 IRQ_TYPE_LEVEL_HIGH>, - <129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - CP110_LABEL(eth1): eth1 { - interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>, - <52 IRQ_TYPE_LEVEL_HIGH>, - <56 IRQ_TYPE_LEVEL_HIGH>, - <60 IRQ_TYPE_LEVEL_HIGH>, - <64 IRQ_TYPE_LEVEL_HIGH>, - <68 IRQ_TYPE_LEVEL_HIGH>, - <72 IRQ_TYPE_LEVEL_HIGH>, - <128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - CP110_LABEL(eth2): eth2 { - interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>, - <49 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>, - <57 IRQ_TYPE_LEVEL_HIGH>, - <61 IRQ_TYPE_LEVEL_HIGH>, - <65 IRQ_TYPE_LEVEL_HIGH>, - <69 IRQ_TYPE_LEVEL_HIGH>, - <73 IRQ_TYPE_LEVEL_HIGH>, - <127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - CP110_LABEL(comphy): phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "mg_clk", "mg_core_clk", "axi_clk"; - #address-cells = <1>; - #size-cells = <0>; - - CP110_LABEL(comphy0): phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy1): phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy2): phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy3): phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy4): phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy5): phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - CP110_LABEL(mdio): mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(xmdio): mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - clocks = <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(icu): interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x440>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(icu_nsr): interrupt-controller@10 { - compatible = "marvell,cp110-icu-nsr"; - reg = <0x10 0x20>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - CP110_LABEL(icu_sei): interrupt-controller@50 { - compatible = "marvell,cp110-icu-sei"; - reg = <0x50 0x10>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&sei>; - }; - }; - - CP110_LABEL(rtc): rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - interrupt-controller; - interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, - <85 IRQ_TYPE_LEVEL_HIGH>, - <84 IRQ_TYPE_LEVEL_HIGH>, - <83 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - - CP110_LABEL(gpio2): gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; - interrupt-controller; - interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, - <81 IRQ_TYPE_LEVEL_HIGH>, - <80 IRQ_TYPE_LEVEL_HIGH>, - <79 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - }; - - CP110_LABEL(syscon1): system-controller@400000 { - compatible = "syscon", "simple-mfd"; - reg = <0x400000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(thermal): thermal-sensor@70 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x70 0x10>; - interrupts-extended = - <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; - }; - - CP110_LABEL(usb3_0): usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 22>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(usb3_1): usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 23>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>, - <&CP110_LABEL(clk) 1 16>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - }; - - sata-port@1 { - reg = <1>; - }; - }; - - CP110_LABEL(xor0): xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 8>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(xor1): xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 7>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(spi0): spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(spi1): spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c0): i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c1): i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart0): serial@702000 { - compatible = "snps,dw-apb-uart"; - reg = <0x702000 0x100>; - reg-shift = <2>; - interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart1): serial@702100 { - compatible = "snps,dw-apb-uart"; - reg = <0x702100 0x100>; - reg-shift = <2>; - interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart2): serial@702200 { - compatible = "snps,dw-apb-uart"; - reg = <0x702200 0x100>; - reg-shift = <2>; - interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart3): serial@702300 { - compatible = "snps,dw-apb-uart"; - reg = <0x702300 0x100>; - reg-shift = <2>; - interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(nand_controller): nand@720000 { - /* - * Due to the limitation of the pins available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand-controller", - "marvell,armada370-nand-controller"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 2>, - <&CP110_LABEL(clk) 1 17>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - }; - - CP110_LABEL(trng): trng@760000 { - compatible = "marvell,armada-8k-rng", - "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 25>, - <&CP110_LABEL(clk) 1 17>; - status = "okay"; - }; - - CP110_LABEL(sdhci0): sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; - dma-coherent; - status = "disabled"; - }; - - CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, - <89 IRQ_TYPE_LEVEL_HIGH>, - <90 IRQ_TYPE_LEVEL_HIGH>, - <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 26>, - <&CP110_LABEL(clk) 1 17>; - dma-coherent; - }; - }; - - CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; -}; +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi new file mode 100644 index 000000000000..3e77cf34604c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP11x. + */ + +#include +#include + +#include "armada-common.dtsi" + +#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000)) +#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000)) +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP11X_NAME: CP11X_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&CP11X_LABEL(thermal) 0>; + + trips { + CP11X_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + }; +}; + +&CP11X_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP11X_LABEL(icu_nsr)>; + ranges; + + config-space@CP11X_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; + + CP11X_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, + <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP11X_LABEL(eth0): eth0 { + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP11X_LABEL(eth1): eth1 { + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP11X_LABEL(eth2): eth2 { + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP11X_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + CP11X_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP11X_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + clocks = <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP11X_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; + }; + + CP11X_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP11X_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP11X_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP11X_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + + CP11X_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + CP11X_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + interrupts-extended = + <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; + + CP11X_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 22>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 23>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + dma-coherent; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP11X_LABEL(clk) 1 15>, + <&CP11X_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; + }; + + CP11X_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 8>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 7>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(nand_controller): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 2>, + <&CP11X_LABEL(clk) 1 17>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + }; + + CP11X_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 25>, + <&CP11X_LABEL(clk) 1 17>; + status = "okay"; + }; + + CP11X_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP11X_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 26>, + <&CP11X_LABEL(clk) 1 17>; + dma-coherent; + }; + }; + + CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; +}; From 1399672e48b573f6526b9ac78cfd50314f0b01a6 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:30 +0200 Subject: [PATCH 15/23] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory range. This shows that I/O memory has never been used/working on the old SoCs despite the region being advertised. As PCIe I/O ranges will not be supported in newer SoCs using CP11x co-processors, let's simply drop them. It is not harmful in any case as PCIe device drivers can do it all with the regular mapped memory anyway. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 2 -- .../boot/dts/marvell/armada-8040-mcbin.dtsi | 3 +-- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 4 ---- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 16 +++------------- 4 files changed, 4 insertions(+), 21 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index 4e78ccd207b7..ac28903ea409 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -19,7 +19,6 @@ aliases { */ #define CP11X_NAME cp0 #define CP11X_BASE f2000000 -#define CP11X_PCIE_IO_BASE 0xf9000000 #define CP11X_PCIE_MEM_BASE 0xf6000000 #define CP11X_PCIE0_BASE f2600000 #define CP11X_PCIE1_BASE f2620000 @@ -29,7 +28,6 @@ aliases { #undef CP11X_NAME #undef CP11X_BASE -#undef CP11X_PCIE_IO_BASE #undef CP11X_PCIE_MEM_BASE #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index d250f4b2bfed..572e2610e0a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -179,8 +179,7 @@ &cp0_pcie0 { num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; - ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 - 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index ebb98836ec9c..902eed571bcc 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -21,7 +21,6 @@ aliases { */ #define CP11X_NAME cp0 #define CP11X_BASE f2000000 -#define CP11X_PCIE_IO_BASE 0xf9000000 #define CP11X_PCIE_MEM_BASE 0xf6000000 #define CP11X_PCIE0_BASE f2600000 #define CP11X_PCIE1_BASE f2620000 @@ -31,7 +30,6 @@ aliases { #undef CP11X_NAME #undef CP11X_BASE -#undef CP11X_PCIE_IO_BASE #undef CP11X_PCIE_MEM_BASE #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE @@ -42,7 +40,6 @@ aliases { */ #define CP11X_NAME cp1 #define CP11X_BASE f4000000 -#define CP11X_PCIE_IO_BASE 0xfd000000 #define CP11X_PCIE_MEM_BASE 0xfa000000 #define CP11X_PCIE0_BASE f4600000 #define CP11X_PCIE1_BASE f4620000 @@ -52,7 +49,6 @@ aliases { #undef CP11X_NAME #undef CP11X_BASE -#undef CP11X_PCIE_IO_BASE #undef CP11X_PCIE_MEM_BASE #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 3e77cf34604c..7d1ab097453d 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -10,7 +10,6 @@ #include "armada-common.dtsi" -#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000)) #define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000)) #define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000) @@ -507,11 +506,8 @@ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { msi-parent = <&gic_v2m0>; bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000 /* non-prefetchable memory */ - 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; @@ -534,11 +530,8 @@ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { msi-parent = <&gic_v2m0>; bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000 /* non-prefetchable memory */ - 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; @@ -562,11 +555,8 @@ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { msi-parent = <&gic_v2m0>; bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000 /* non-prefetchable memory */ - 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; From 5f07b26e85dc86f017833ea745ff4e5b420280cd Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:31 +0200 Subject: [PATCH 16/23] arm64: dts: marvell: Externalize PCIe macros from CP11x file PCIe macros are specific to CP110 and will not fit CP115 constraints. To keep the same way the files are organized, just move some macros out of the CP11x generic file and define them directly in SoC DTSI, instead of defining single addresses in the SoC DTSI and reusing them in macros. In the end: * CP11X_PCIE_MEM_BASE SoC define is dropped * CP11X_PCIEx_MEM_BASE is moved out of the generic DT to be put in the SoC files as it replaces the above definition. * As the CP11X_PCIEx_MEM_SIZE macro is also subject to change with newer SoCs, we put it in the SoC files as well. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 6 ++++-- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 12 ++++++++---- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 9 ++++----- 3 files changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index ac28903ea409..293403a1a333 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -19,7 +19,8 @@ aliases { */ #define CP11X_NAME cp0 #define CP11X_BASE f2000000 -#define CP11X_PCIE_MEM_BASE 0xf6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 #define CP11X_PCIE0_BASE f2600000 #define CP11X_PCIE1_BASE f2620000 #define CP11X_PCIE2_BASE f2640000 @@ -28,7 +29,8 @@ aliases { #undef CP11X_NAME #undef CP11X_BASE -#undef CP11X_PCIE_MEM_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE #undef CP11X_PCIE2_BASE diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 902eed571bcc..ee67c70bf02e 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -21,7 +21,8 @@ aliases { */ #define CP11X_NAME cp0 #define CP11X_BASE f2000000 -#define CP11X_PCIE_MEM_BASE 0xf6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 #define CP11X_PCIE0_BASE f2600000 #define CP11X_PCIE1_BASE f2620000 #define CP11X_PCIE2_BASE f2640000 @@ -30,7 +31,8 @@ aliases { #undef CP11X_NAME #undef CP11X_BASE -#undef CP11X_PCIE_MEM_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE #undef CP11X_PCIE2_BASE @@ -40,7 +42,8 @@ aliases { */ #define CP11X_NAME cp1 #define CP11X_BASE f4000000 -#define CP11X_PCIE_MEM_BASE 0xfa000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 #define CP11X_PCIE0_BASE f4600000 #define CP11X_PCIE1_BASE f4620000 #define CP11X_PCIE2_BASE f4640000 @@ -49,7 +52,8 @@ aliases { #undef CP11X_NAME #undef CP11X_BASE -#undef CP11X_PCIE_MEM_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE #undef CP11X_PCIE2_BASE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 7d1ab097453d..9dcf16beabf5 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -10,8 +10,7 @@ #include "armada-common.dtsi" -#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000)) -#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000) +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) / { /* @@ -507,7 +506,7 @@ CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { bus-range = <0 0xff>; /* non-prefetchable memory */ - ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>; + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; @@ -531,7 +530,7 @@ CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { bus-range = <0 0xff>; /* non-prefetchable memory */ - ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>; + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; @@ -556,7 +555,7 @@ CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { bus-range = <0 0xff>; /* non-prefetchable memory */ - ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>; + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; From 96bb4b31aa660e39fca2bb464b9a9f399bd5b71c Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:32 +0200 Subject: [PATCH 17/23] arm64: dts: marvell: Add support for CP115 Create a DTSI file based on the CP11x one. Differences will be described in the near future. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi new file mode 100644 index 000000000000..1d0a9653e681 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP115. + */ + +#define CP11X_TYPE cp115 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE From 6b8970bd8d7a17a648e31f3996d9b21336b4a2cf Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 4 Oct 2019 16:27:35 +0200 Subject: [PATCH 18/23] arm64: dts: marvell: Add support for Marvell CN9130 SoC support A CN9130 SoC has one AP807 and one internal CP115. Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/cn9130.dtsi | 37 +++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi new file mode 100644 index 000000000000..a2b7e5ec979d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130 SoC. + */ + +#include "armada-ap807-quad.dtsi" + +/ { + model = "Marvell Armada CN9130 SoC"; + compatible = "marvell,cn9130", "marvell,armada-ap807-quad", + "marvell,armada-ap807"; +}; + +/* + * Instantiate the internal CP115 + */ + +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ + 0xe0000000 + ((iface - 1) * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE From 8aeca97bd4c6745191a5fe2e42ca178d697fae1e Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:36 +0200 Subject: [PATCH 19/23] arm64: dts: marvell: Add support for Marvell CN9130-DB Add basic support for the Marvell CN9130 modular development board. It is based on a CN9130 SoC (one AP807 and one internal CP115), extended via 2xMoCi interface to possibly add up to two more external CP115 (one located on the main board and the other on the board extension). Available interfaces: * AP UART * AP eMMC * AP SDHCI (disabled) * CPO GPIO-0 * CPO GPIO-1 * CP0 CRYPTO-0 (disabled) * CP0 I2C-0 * CP0 I2C-1 * CP0 SDHCI-0 * CP0 NAND-0 * CP0 SPI-1 * CP0 ETH-0 (SFI with SFP cage not working yet, disabled) * CP0 ETH-1 (RGMII) * CP0 ETH-2 (RGMII) * CP0 SATA-0-1 * CP0 USB3-0 (High-speed only) * CP0 USB3-1 (High-speed only) * CP0 PCIe-0 x4 Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/Makefile | 1 + arch/arm64/boot/dts/marvell/cn9130-db.dts | 403 ++++++++++++++++++++++ 2 files changed, 404 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db.dts diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 243338c914a4..70cac6127148 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -10,3 +10,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts new file mode 100644 index 000000000000..ce49a70d88a0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include + +/ { + model = "Marvell Armada CN9130-DB"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xd00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; From fe5e610f16a3e210e4f9e56b370dcbb8cb547e76 Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:37 +0200 Subject: [PATCH 20/23] arm64: dts: marvell: Add support for Marvell CN9131-DB Extend the support of the CN9130 by adding an external CP115. The last number indicates how many external CP115 are used. New available interfaces: * CP1 CRYPTO-0 (disabled) * CP1 ETH-0 (SFI, problem with the SFP cage, disabled) * CP1 GPIO-1 * CP1 GPIO-2 * CP1 I2C-0 * CP1 PCIe-0 x2 * CP1 SPI-1 * CP1 SATA-0-1 * CP1 USB3-1 Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/Makefile | 1 + arch/arm64/boot/dts/marvell/cn9131-db.dts | 202 ++++++++++++++++++++++ 2 files changed, 203 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db.dts diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 70cac6127148..9fbf8f460153 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -11,3 +11,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts new file mode 100644 index 000000000000..3c975f98b2a3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dts" + +/ { + model = "Marvell Armada CN9131-DB"; + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; From e1bd6ca9f8be4ec14149d01baf27583bbb5c740b Mon Sep 17 00:00:00 2001 From: Grzegorz Jaszczyk Date: Fri, 4 Oct 2019 16:27:38 +0200 Subject: [PATCH 21/23] arm64: dts: marvell: Add support for Marvell CN9132-DB Extend the support of the CN9131 with yet another additional CP115. The last number indicates how many external CP115 are used. New available interfaces: * CP2 CRYPTO-0 (disabled) * CP2 ETH-0 (SFI, problem with the SFP cage, disabled) * CP2 GPIO-1 * CP2 GPIO-2 * CP2 I2C-0 * CP2 PCIe-0 x2 * CP2 PCIe-2 x1 (disabled) * CP2 SDHCI-0 * CP2 USB3-1 (High-speed) Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/Makefile | 1 + arch/arm64/boot/dts/marvell/cn9132-db.dts | 221 ++++++++++++++++++++++ 2 files changed, 222 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db.dts diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 9fbf8f460153..f1b5127f0b89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -12,3 +12,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000000..4ef0df3097ca --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; From 447b8789359f9a5e6567c4044d18abaa7de68930 Mon Sep 17 00:00:00 2001 From: Tomasz Maciej Nowak Date: Mon, 3 Jun 2019 17:53:54 +0200 Subject: [PATCH 22/23] arm64: dts: marvell: add ESPRESSObin variants This commit adds dts for different variants of ESPRESSObin board: ESPRESSObin with soldered eMMC, ESPRESSObin V7, compared to prior versions some passive elements changed and ethernet ports labels positions have been reversed, ESPRESSObin V7 with soldered eMMC. Since most of elements are the same, one common dtsi is created and referenced in each dts of particular variant. Signed-off-by: Tomasz Maciej Nowak Signed-off-by: Gregory CLEMENT --- .../marvell/armada-3720-espressobin-emmc.dts | 42 ++++ .../armada-3720-espressobin-v7-emmc.dts | 59 ++++++ .../marvell/armada-3720-espressobin-v7.dts | 36 ++++ .../dts/marvell/armada-3720-espressobin.dts | 184 +----------------- .../dts/marvell/armada-3720-espressobin.dtsi | 177 +++++++++++++++++ 5 files changed, 315 insertions(+), 183 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 000000000000..bd9ed9dc9c3e --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier + * Konstantin Porotchkin + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 000000000000..6e876a6d9532 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier + * Konstantin Porotchkin + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 000000000000..0f8405d085fd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier + * Konstantin Porotchkin + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index fbcf03f86c96..1542d836c090 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -12,191 +12,9 @@ /dts-v1/; -#include -#include "armada-372x.dtsi" +#include "armada-3720-espressobin.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; -}; - -/* J9 */ -&pcie0 { - status = "okay"; - phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -}; - -/* J6 */ -&sata { - status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; -}; - -/* J1 */ -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - vqmmc-supply = <&vcc_sd_reg1>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - status = "okay"; -}; - -/* U11 */ -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; -/* - * This eMMC is not populated on all boards, so disable it by - * default and let the bootloader enable it, if it is present - */ - status = "disabled"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector J5 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* - * Connector J17 and J18 expose a number of different features. Some pins are - * multiplexed. This is the case for instance for the following features: - * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of - * how to enable it. Beware that the signals are 1.8V TTL. - * - I2C - * - SPI - * - MMC - */ - -/* J7 */ -&usb3 { - status = "okay"; -}; - -/* J8 */ -&usb2 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <ð0>; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi new file mode 100644 index 000000000000..53b8ac55a7f3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier + * + */ + +/dts-v1/; + +#include +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; +}; + +/* J6 */ +&sata { + status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; From 46d2f6d0c99f7f95600e633c7dc727745faaf95e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Wed, 4 Sep 2019 19:07:39 +0200 Subject: [PATCH 23/23] arm64: dts: armada-3720-turris-mox: add firmware node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the node representing the firmware running on the secure processor. Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index d105986c6be1..38372fcc6430 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -111,6 +111,14 @@ sfp: sfp { /* enabled by U-Boot if SFP module is present */ status = "disabled"; }; + + firmware { + turris-mox-rwtm { + compatible = "cznic,turris-mox-rwtm"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; }; &i2c0 {