From e53537653791b4aaa9ec88a9eb5fd187d44ff6ac Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 20 Dec 2017 13:17:49 +0100 Subject: [PATCH] i2c/ARM: davinci: Deep refactoring of I2C recovery Alter the DaVinci GPIO recovery fetch to use descriptors all the way down into the board files. Signed-off-by: Linus Walleij Acked-by: Sekhar Nori Tested-by: Sekhar Nori Acked-by: Arnd Bergmann Signed-off-by: Wolfram Sang --- arch/arm/mach-davinci/board-dm355-evm.c | 15 +++++++++++++-- arch/arm/mach-davinci/board-dm644x-evm.c | 15 +++++++++++++-- drivers/i2c/busses/i2c-davinci.c | 21 +++++++++++---------- include/linux/platform_data/i2c-davinci.h | 5 ++--- 4 files changed, 39 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 62e7bc3018f0..e457f299cd44 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -108,11 +109,20 @@ static struct platform_device davinci_nand_device = { }, }; +static struct gpiod_lookup_table i2c_recovery_gpiod_table = { + .dev_id = "i2c_davinci", + .table = { + GPIO_LOOKUP("davinci_gpio", 15, "sda", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP("davinci_gpio", 14, "scl", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 400 /* kHz */, .bus_delay = 0 /* usec */, - .sda_pin = 15, - .scl_pin = 14, + .gpio_recovery = true, }; static int dm355evm_mmc_gpios = -EINVAL; @@ -141,6 +151,7 @@ static struct i2c_board_info dm355evm_i2c_info[] = { static void __init evm_init_i2c(void) { + gpiod_add_lookup_table(&i2c_recovery_gpiod_table); davinci_init_i2c(&i2c_pdata); gpio_request(5, "dm355evm_msp"); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b07c9b18d427..85e6fb33b1ee 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -595,18 +596,28 @@ static struct i2c_board_info __initdata i2c_info[] = { }, }; +static struct gpiod_lookup_table i2c_recovery_gpiod_table = { + .dev_id = "i2c_davinci", + .table = { + GPIO_LOOKUP("davinci_gpio", 44, "sda", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP("davinci_gpio", 43, "scl", + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), * which requires 100 usec of idle bus after i2c writes sent to it. */ static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 20 /* kHz */, .bus_delay = 100 /* usec */, - .sda_pin = 44, - .scl_pin = 43, + .gpio_recovery = true, }; static void __init evm_init_i2c(void) { + gpiod_add_lookup_table(&i2c_recovery_gpiod_table); davinci_init_i2c(&i2c_pdata); i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 2afb12a89eb3..cb24a3ffdfa2 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include @@ -869,19 +869,20 @@ static int davinci_i2c_probe(struct platform_device *pdev) if (dev->pdata->has_pfunc) adap->bus_recovery_info = &davinci_i2c_scl_recovery_info; - else if (dev->pdata->scl_pin) { + else if (dev->pdata->gpio_recovery) { rinfo = &davinci_i2c_gpio_recovery_info; adap->bus_recovery_info = rinfo; - r = gpio_request_one(dev->pdata->scl_pin, GPIOF_OPEN_DRAIN | - GPIOF_OUT_INIT_HIGH, "i2c-scl"); - if (r) + rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", + GPIOD_OUT_HIGH_OPEN_DRAIN); + if (IS_ERR(rinfo->scl_gpiod)) { + r = PTR_ERR(rinfo->scl_gpiod); goto err_unuse_clocks; - rinfo->scl_gpiod = gpio_to_desc(dev->pdata->scl_pin); - - r = gpio_request_one(dev->pdata->sda_pin, GPIOF_IN, "i2c-sda"); - if (r) + } + rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN); + if (IS_ERR(rinfo->sda_gpiod)) { + r = PTR_ERR(rinfo->sda_gpiod); goto err_unuse_clocks; - rinfo->sda_gpiod = gpio_to_desc(dev->pdata->scl_pin); + } } adap->nr = pdev->id; diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h index 89fd34727a24..98967df07468 100644 --- a/include/linux/platform_data/i2c-davinci.h +++ b/include/linux/platform_data/i2c-davinci.h @@ -16,9 +16,8 @@ struct davinci_i2c_platform_data { unsigned int bus_freq; /* standard bus frequency (kHz) */ unsigned int bus_delay; /* post-transaction delay (usec) */ - unsigned int sda_pin; /* GPIO pin ID to use for SDA */ - unsigned int scl_pin; /* GPIO pin ID to use for SCL */ - bool has_pfunc; /*chip has a ICPFUNC register */ + bool gpio_recovery; /* Use GPIO recovery method */ + bool has_pfunc; /* Chip has a ICPFUNC register */ }; /* for board setup code */